Some key figure are not update for movement type 101
Dear All,
I have done load for Inventory and now i am finding that for some material the with movement type 101 the key figures are not getting populated, for these materials the values in characteristics is getting populated fine.
I have loaded the data according to stranded procedure in "How to Load...."
I have checked the values of material in R3 and it is there.
Example of the record::
Material Plant Movement type Calender Day quanity Base Unit
10101 01 350 01.02.2006 20 KG
10101 01 101 05.07.2006 KG
10101 01 101 10.07.2006 KG
The Quantity is not appearing in second and third record.
Hi,
Please check whether you have set ''Rule groups'' at transfermation level . There you can set the conditions like materials having movement type X can be updated to one Key Figure and material having movement type Y can be updated to another Key figure.
Please check whether you have set this option at transfermation level.
For example, may be in your case materials from different plants are updating to different key figure.
Thanks,
Edited by: kavitha nagandla on Feb 17, 2010 7:19 AM
Similar Messages
-
Some key figures are not being correctly reversed in the Change Log
Hi Experts,
I'm working with the BI 7 (SP 15) and I have created an ODS with Overwrite option (Record Mode equal to ' ') and a Cube receiving data from this ODS.
Whenever I have a change in one existing record in R/3 side (already previously loaded to BW), it comes perfectly to the ODS and overwrite the record in the Active Data. However, in the change log table, the before image record is not reversing all the key figures, there is one (Quant type) which is not working and it is being doubled in the cube. All the other key figures are Amount type and are working fine. PLease see below some examples of the Change Log behavior:
First time the record comes - Change log content:
Material Valid Dt Cost Value Quantity Rec. Mode Req. ID
1234 May/01 $ 100.00 10 'N' 1
Second time when the record changes the Date:
Material Date Cost Value Quantity Rec. Mode Req. 1234 May/29 $ 100.00 10 ' ' 2
1234 May/01 $ -100.00 10 'X' 2
Then the final result in the cube, after it is compressed, is:
Material Date Cost Value Quantity
1234 May/29 $ 100.00 20
Also, I have a Counter in the transformation to the Cube which is a constant equal to 1, it is also being aggregated erroneously. I could create a routine to check the record mode coming, but I'm not sure it is the best solution.
Can anybody help me to figure this out, please?
Thanks in advance.Hi Rajkumar,
Actually it is a generic extractor (customized) and the ODS active data is getting the delta records correctly. After I extract from R/3 and activate the ODS, the active table has correct results, but the change log table has the problem described before. All the fields comes from one single extractor.
The 0RECORDMODE that I mentioned is about the setting in the transformation to the ODS. You have the Technical rule group where you can set the 0RECORDMODE, in my case it is set to ' ' (blank) which means it will receive After-Images from the extractor (which I think is correct in my case). The most curious is that it is working for almost all key figures (all amount type), except for the Price Unit which is Quantity type.
Any other ideas?
Thanks. -
Profit Center not updated for mov type 511
When we are doing the goods receipt through transaction MIGO with mov
type 511 (Receipt of delivery without charge) as 2nd line item along with
mov. Type 101 as first line item, profit center document is not getting
updated for 2nd line item (GLPCA-MSL), but for 1st line item (mov type
101) profit center getting updated.
If we are doing the GR with movement type 511 alone, profit center
(GLPCA-MSL) updated correctly.hi,
As per your error i might understand.
please check for second line item Item okay is marked or not.
if its 511 then please check whether Pricing control in MA-master whether its a Moving average or Standard price.
as you said for singular 511 profit center gettng updated then you can very well compare to GR's.
Regards,
Ninad Kshirsagar -
Classification Data (SLED) not Updated for Movement Type 561
Dear All,
I have noticed that after uploading the opening stock with movement type 561, the Classification data (Date of manufacture & Shelf Life expiry date) which was captured in MB1C is not updated in the batch master in Classification Tab.
Is this standard SAP behaviour for 561 movement type? Or is there any config is missing?
Please advise.
Regards,
Suresh.Hi Suresh,
For your question I understand that while uploading the initial balances, system didn't ask you for the Manufacturing date or total shelf life date. Following is the solution:
You have to maintain "Check SLExpir.date" and "Classif.batches" indicators for the movement type 561 or any movement type you required. This customization can be perform through SPRO>>MM>>IM>>Goods Mvt. and mvt. No.
Also activate SLED at plant level in customization.
Regards
SAK -
Inspection lot not created for movement type 101 O
Dear all,
. We are creating a PO (ME21N) indicating in the view u201CDelivery addressu201D the same vendor than the PO and the flag u201CSubcontracting vendoru201D
. The material has in MM02 the inspection type 0130 Receiving Insp. from External Processing.
. There is QM plan with the Usage 53 GR external process.
. When we do MIGO 101 u201CSpecial Stock Indicatoru201D O Parts prov. Vendor. The system doesnot create an inspection lot.
But in MMBE the stock appears in u201CStock Provided to Vendoru201D u201Cquality stocku201D. The customer wants to control that stock in u201CQuality inspection:
Can somebody help me?
regards
shilpaSPRO - QM - Quality inspection - Inspection lot creation - inspection of goods movement - Deactivate Quality Inspection for a Movement Type
Check in this setting, whether QM is deactivated for 101 and special stock O -
I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it, and I can't for the life of me figure out how to fix this. Can anyone help? of course this happened after my warranty expired.
**update**
I don't know if this will help someone but I am posting this for that purpose. In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!). Well I didn't want to do that but it always stuck in the back of my mind. I had given up, really, and was planning to take my MBP to the apple store. But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working.
So, maybe try keeping the MBP in a cool place when it's off. Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
Hopefully this might help someone. -
Error in DTP load from PSA to IC - Error - Key figure 0 not allowed for
HI ALL,
ERROR - Key figure <> 0 not allowed for unit ' '; see long text
Diagnosis
The unit/currency ' Source unit MEIN ' with the value 'space' is
assigned to the key figure ' Source Key Fig. DIFF ' with the value '
4240.000- '.
System Response
A key figure that is not equal to 0 and for which no unit/currency is
set has an inconsistent data state. The data record is not processed.
Procedure
Correct the source data.
Procedure for System Administration
Please guide
BR
PrasadHi ,
First af all identify all such records by creating an error DTP so that the same can be collected in Error stack .
1. Go to the Update tab of the normal DTP and there you can find the create Error DTP option .Click on that .
2. This will take you to the Error DTP screen .Use the option 'Valid record updated reporting possible (request green).You can increase the number of errorneous records to be avoided there only .
3. Please make sure you have activated the option of ' Valid records update reporting possible request green ' both in the Normal and Error DTP .Also the number of errorneous records to be avoided to be mentioned in both the DTP's.
4. Activate the DTP's (Both Normal and Error) .
After this can you please run the Normal DTP again .You can check the Error stack to see the errorneous records .When you double click on any record in the error stack it will thrown an error message from where you can find the exact error with those records .You can rectify these records in the errror stack and then run the error DTP to update the same to the data target.
Ideally these records should be rectified in the Source system .
Thanks
Kamal -
KSPP -Scheduled Activity are not updated for last 2 periods
Hi All,
When we run KSPP by using LTP, noticed that for one cost center and activity type the plan scheduled Acivities are not updated for last 2 period's.(shows Zero)
Do we miss any thing.
Regards,
RajHi,
It can be due to the sales demand you have uploaded and the Lead time in the material master
because of the that, the demand gets shifted before (say, Dec demand gets shifted for manufacturing in October) and the activity qty in the last month comes zero
So, upload 14 months demand where 13 and 14th month is the same as 12th month... Most of the companies do this way
Ajay M -
BAPI_GOODSMVT_CREATE is not working for movement type 701 in MIGO
Hi gurus
Can anybody help to track that bapi: BAPI_GOODSMVT_CREATE is not working for movement type 701 for MIGO Transaction.call this standard BAPI, AND EXECUTE IN SE37
""Local Interface:
*" IMPORTING
*" VALUE(GOODSMVT_HEADER) LIKE BAPI2017_GM_HEAD_01 STRUCTURE
*" BAPI2017_GM_HEAD_01
*" VALUE(GOODSMVT_CODE) LIKE BAPI2017_GM_CODE STRUCTURE
*" BAPI2017_GM_CODE
*" VALUE(TESTRUN) LIKE BAPI2017_GM_GEN-TESTRUN DEFAULT SPACE
*" VALUE(GOODSMVT_REF_EWM) LIKE /SPE/BAPI2017_GM_REF_EWM STRUCTURE
*" /SPE/BAPI2017_GM_REF_EWM OPTIONAL
*" EXPORTING
*" VALUE(GOODSMVT_HEADRET) LIKE BAPI2017_GM_HEAD_RET STRUCTURE
*" BAPI2017_GM_HEAD_RET
*" VALUE(MATERIALDOCUMENT) TYPE BAPI2017_GM_HEAD_RET-MAT_DOC
*" VALUE(MATDOCUMENTYEAR) TYPE BAPI2017_GM_HEAD_RET-DOC_YEAR
*" TABLES
*" GOODSMVT_ITEM STRUCTURE BAPI2017_GM_ITEM_CREATE
*" GOODSMVT_SERIALNUMBER STRUCTURE BAPI2017_GM_SERIALNUMBER
*" OPTIONAL
*" RETURN STRUCTURE BAPIRET2
*" GOODSMVT_SERV_PART_DATA STRUCTURE
*" /SPE/BAPI2017_SERVICEPART_DATA OPTIONAL
*" EXTENSIONIN STRUCTURE BAPIPAREX OPTIONAL
*" GOODSMVT_ITEM_CWM STRUCTURE /CWM/BAPI2017_GM_ITEM_CREATE
*" OPTIONAL
call function 'BAPI_GOODSMVT_CREATE'
exporting
goodsmvt_header = goodsmvt_header
goodsmvt_code = goodsmvt_code
testrun = testrun
goodsmvt_ref_ewm = goodsmvt_ref_ewm
importing
goodsmvt_headret = goodsmvt_headret
materialdocument = materialdocument
matdocumentyear = matdocumentyear
tables
goodsmvt_item = goodsmvt_item
goodsmvt_serialnumber = goodsmvt_serialnumber
return = return
goodsmvt_serv_part_data = goodsmvt_serv_part_data
extensionin = extensionin.
commit work.
hi, rewards point, if this is useful,
regrds
karthikeyan -
GR PO UPLOAD FOR MOVEMENT TYPE 101 (IMPORTED)
We want to use Goods receipt PO upload for movement type 101(imported.) I donot know the logic. Pl. give me some idea.For domestic case one T-code is presently running. The problem is in case of imported p.o. waiting for your early response.
THANKS
NRKhi,
even for Imported PO ur using the same Tranasctioon code.
but check ur proceedure.
u need to book the MIRO for duty payment, attach the same to MIGO, while doing the GR, then Jid for posting the duties.
again MIRO for invoice payment to vendor -
Inspection Lot generation for Movement type 101-O
Hi
I would like to know, which config / Master data need to generate Inspection Lot for Movement type 101-O.
I enter subcontract vendor number and set 'SC Vendor' indicator in purchase order delivery address tab and I created QM data in Material Master.(Insp.Type 01)
While doing GR with reference to purchase Order, stock is Posted to Material provided to vendor - Quality inspection stock. But Inspection Lot
is not generated.
Pl suggest me, What should i do to generate Inspection Lot.
Thanks in Advance.
RRShi
Soln 1) Just check whether Inspection is active for 101 - O in SPRO settings if not, activate the same.
Path: Inspection Lot creation/Inspection for Goods Movement
Soln 2) As you flag "SC Vendor" in PO and make GR all stocks will be shown against the Vendor.
From your question I assume that you would like to do inspection for materials coming from Subcontactor end to your Plant:
If this is the case you dont flag "SC Vendor" in PO, make a normal Goods Receipt for the Subcontracting PO, based on Insp setup in Material Master for 01 Insp type Insp lot will be created.
Regards
DC -
Gr po upload for movement type 101
Dear cons
We want to upload GR PO UPLOAD FOR MOVEMENT TYPE 101(IMPORTED MATERIAL).We have store data in a excel file. We want to upload. What is the procedure to make a report? Because the procurement cycle of imported case is different to domestic case. For domestic case it is o.k. the problem is in imported case. Because in imported case first we enter invoice known as commercial invoice. Pl. look into the matter. How ABAP Consultant will do it.
Thanks
nrkHi,
In case of import PO's first we have to upload the customs or commercial invoicesfor the PO's.After this we need to prepare a file containg PO number, the uploaded commercial invoice number and the gr details columns.
Then do the recording for GR's and give that recording to the ABAPer so that a BDC can be prepared for uploading.
Thanks & Regards,
Rambhupal -
Why key figures are not displaying
Dear Experts,
I am faced with a problem not encountered before. My report has multiple key figures all of which are not displayed when I run the query. However if I change the view to Tabular format (from query properties) the key figures become visible.
Request your help in resolving the issue.Hi,
are you hidden the some key figures? please check.
select the KF -> go to properties -> check the display tab - hide/show/hide can be shown.
if not close and open one more time in query designer.
Thanks,
Phani. -
Custom propertie's values are not updated for workflow metadata
Hi,
I've a requirement where I need to add and update some properties. to /etc/workflow/instance/<Instancename>/data/metadata node.
I've two workflow Process steps,
Process step 1:
Adds some properties to metadata.
Process step 2:
Updates the propertie's values which are added in Process step 1.
But the issue is update is not working when the node is /etc/workflow/instance/<Instancename>/data/metadata.
i.e. In the step 1, Properties are added to metadata node but In the step 2 propertie's values are not updated to the same node.
Here is my process code:
=================================================
import java.util.Locale;
import java.util.StringTokenizer;
import javax.jcr.Node;
import javax.jcr.Session;
import org.apache.felix.scr.annotations.Component;
import org.apache.felix.scr.annotations.Properties;
import org.apache.felix.scr.annotations.Property;
import org.apache.felix.scr.annotations.Reference;
import org.apache.felix.scr.annotations.Service;
import org.osgi.framework.Constants;
import javax.jcr.Value;
import com.adobe.granite.workflow.WorkflowException;
import com.adobe.granite.workflow.WorkflowSession;
import com.adobe.granite.workflow.exec.WorkItem;
import com.adobe.granite.workflow.metadata.MetaDataMap;
import com.adobe.granite.workflow.exec.WorkflowProcess;
import com.adobe.granite.workflow.model.WorkflowModel;
import org.apache.sling.api.resource.ResourceResolver;
import org.apache.sling.api.resource.ResourceResolverFactory;
import org.apache.sling.jcr.resource.JcrResourceUtil;
import org.apache.sling.api.resource.PersistableValueMap;
import org.apache.sling.api.resource.PersistenceException;
import org.apache.sling.api.resource.Resource;
@Component
@Service
@Properties({
@Property(name = Constants.SERVICE_DESCRIPTION, value = "Test"),
@Property(name = Constants.SERVICE_VENDOR, value = "Adobe"),
@Property(name = "process.label", value = "Test 1")})
public class Test1 implements WorkflowProcess
@Reference
private ResourceResolverFactory resourceResolverFactory;
public void execute(WorkItem workItem, WorkflowSession wfsession, MetaDataMap metadata)
throws WorkflowException {
System.out.println("Testing");
try{
ResourceResolver resolver;
resolver = resourceResolverFactory.getAdministrativeResourceResolver(null);
String instancePath = workItem.getWorkflow().getId();
Node instanceNode=null;
Session jcrSession = wfsession.adaptTo(Session.class);
String payload = (String) workItem.getWorkflowData().getPayload();
//instanceNode=JcrResourceUtil.createPath(payload+"/jcr:content", "nt:resource","nt:resource", jcrSession, true);
instanceNode=JcrResourceUtil.createPath(instancePath+"/data/metaData", "nt:resource","nt:resource", jcrSession, true);
System.out.println("Test: instance PAth:"+instanceNode.getPath());
Resource resource = resolver.getResource(instanceNode.getPath());
if(resource != null)
PersistableValueMap valueMap= resource.adaptTo(PersistableValueMap.class);
valueMap.put("name", "Rajesh");
valueMap.put("id", "A002");
valueMap.put("designation","SE");
valueMap.save();
System.out.println("Name:"+valueMap.get("name"));
System.out.println("Id:"+valueMap.get("id"));
jcrSession.save();
resolver.close();
}catch(Exception e)
System.out.println("Exception:"+e.getMessage());
===================
The code works fine when the node is payload/jcr:content.
Note : Process 1 and Process 2 code is same expect the values I'm passing to the PersistableValueMap.
Any pointers would be more helpful..
Thanks
SivaIs there anything wrong in my code/ it's a bug..
Thanks
Siva -
In Query key figure are not populated
Hi Gurus,
i am using a RSCRMBAPI to get the out put of my query into a Ztable but when i run my program the Ztable is getting data but no key figures are getting populated.
plz help
thanks
neeluHi gurus,
i just have 1.6lac records with six keyfigures so i think its not the problem of limitation...
then can somebody help me how to get rid of this, no key figure values are getting populated
thanks and regards
Neel
Maybe you are looking for
-
Looking for a simple Text App with options like columns, lists etc
I am looking for an app that lets me do simple things like type lists of things , create columns etc . PLEASE tell me that my Mac Pro with Snow Leopard already has the ability to do this somewhere and that i dont need to buy "iWork" or "Excell" to pe
-
Hello all, I am reletively new to IOS and not yet an owner of an I Device (i own an old Ipod Nano but I am sure that doesnt count) I am a long term Android user and still am so far. My upgrade is due later in the year (June/July ish) and have started
-
Hi folks, I have a basic question. I want to store data in Java card of each transaction in a log file. Each record contains some information. I'm wondering how to create this kind of file on java card and update log file for each new transaction. Su
-
My probook 4420s lap is getting shut down frequently
My probook 4420s lap is getting shut down frequently for the last two weeks. Whenever I start d lap, it gets opening normally and after few minutes, it gets power off without showing any error messages. What to do..? Once I tried d hard disk checkin
-
When will sample iPhone 6 be in stores to view?
When will these be in stores to view size...not to purchase?