Some key figures are not being correctly reversed in the Change Log

Hi Experts,
I'm working with the BI 7 (SP 15) and I have created an ODS with Overwrite option (Record Mode equal to ' ') and a Cube receiving data from this ODS.
Whenever I have a change in one existing record in R/3 side (already previously loaded to BW), it comes perfectly to the ODS and overwrite the record in the Active Data. However, in the change log table, the before image record is not reversing all the key figures, there is one (Quant type) which is not working and it is being doubled in the cube. All the other key figures are Amount type and are working fine. PLease see below some examples of the Change Log behavior:
First time the record comes - Change log content:
Material   Valid Dt   Cost Value      Quantity Rec. Mode      Req. ID
1234     May/01   $ 100.00       10          'N'     1
Second time when the record changes the Date:
Material     Date      Cost Value      Quantity Rec. Mode      Req. 1234     May/29   $ 100.00       10          ' '     2
1234     May/01   $ -100.00       10          'X'     2
Then the final result in the cube, after it is compressed, is:
Material     Date      Cost Value      Quantity
1234     May/29   $ 100.00       20
Also, I have a Counter in the transformation to the Cube which is a constant equal to 1, it is also being aggregated erroneously. I could create a routine to check the record mode coming, but I'm not sure it is the best solution.
Can anybody help me to figure this out, please?
Thanks in advance.

Hi Rajkumar,
Actually it is a generic extractor (customized) and the ODS active data is getting the delta records correctly. After I extract from R/3 and activate the ODS, the active table has correct results, but the change log table has the problem described before. All the fields comes from one single extractor.
The 0RECORDMODE that I mentioned is about the setting in the transformation to the ODS. You have the Technical rule group where you can set the 0RECORDMODE, in my case it is set to ' ' (blank) which means it will receive After-Images from the extractor (which I think is correct in my case). The most curious is that it is working for almost all key figures (all amount type), except for the Price Unit which is Quantity type.
Any other ideas?
Thanks.

Similar Messages

Some key figure are not update for movement type 101

Dear All,
I have done load for Inventory and now i am finding that for some material the with movement type 101 the key figures are not getting populated, for these materials the values in characteristics is getting populated fine.
I have loaded the data according to stranded procedure in "How to Load...."
I have checked the values of material in R3 and it is there.
Example of the record::
Material    Plant Movement type Calender Day    quanity Base Unit
10101      01       350                     01.02.2006     20             KG
10101        01       101                     05.07.2006                      KG
10101         01      101                      10.07.2006                      KG
The Quantity is not appearing in second and third record.

Hi,
Please check whether you have set ''Rule groups'' at transfermation level . There you can set the conditions like materials having movement type X can be updated to one Key Figure and material having movement type Y can be updated to another Key figure.
Please check whether you have set this option at transfermation level.
For example, may be in your case materials from different plants are updating to different key figure.
Thanks,
Edited by: kavitha nagandla on Feb 17, 2010 7:19 AM

Hidden Key figures are not being displayed after unhiding

We've applied SP 14 - SP 22 in our 3.1C BW system. Prior to the patches going in, users were able to unhide hidden key figures through the Change Query local view and view them in the report once the query was executed. After the patches were applied, even though the key figures
were unhiden through the change query local view, they are not returned in the report after executing the
query.
As anyone run across this after appling this patch level ?

Hi Rajkumar,
Actually it is a generic extractor (customized) and the ODS active data is getting the delta records correctly. After I extract from R/3 and activate the ODS, the active table has correct results, but the change log table has the problem described before. All the fields comes from one single extractor.
The 0RECORDMODE that I mentioned is about the setting in the transformation to the ODS. You have the Technical rule group where you can set the 0RECORDMODE, in my case it is set to ' ' (blank) which means it will receive After-Images from the extractor (which I think is correct in my case). The most curious is that it is working for almost all key figures (all amount type), except for the Price Unit which is Quantity type.
Any other ideas?
Thanks.

Scientific fluorescence figures are not displayed correctly on iPad

I use the iPad 1 for reading scientific papers, and I figured out that some fluorescence figures are not displayed correctly. The colours are not correctly distinguished, even some colours are completely missing. Is this a limitation of the iPad display or the current version of iOS.
I am really disappointed. So, is there any solution?
Many thanks.
On MacBook Pro
On iPad 1

I am woundering if anyone can suggest any solution? Thank you.

I have a macbook pro with OSX Mavericks 10.9.5 and some keys that are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it

I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it, and I can't for the life of me figure out how to fix this. Can anyone help? of course this happened after my warranty expired.

**update**
I don't know if this will help someone but I am posting this for that purpose. In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!). Well I didn't want to do that but it always stuck in the back of my mind. I had given up, really, and was planning to take my MBP to the apple store. But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working.
So, maybe try keeping the MBP in a cool place when it's off. Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
Hopefully this might help someone.

Since upgrading to iOS7 some text messages are not being sent, iMessage on my Ipad and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things

Since upgrading to iOS7 some text messages are not being sent on my iPhone 5, iMessage on my Ipads and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things. Any suggestions to fix these faults?

Make sure People Sending you via iMessage are sending their messages on your PHONE number not on your EMAIL addresses . My sister had the same problem, thats how i managed to solve it!

When douwnloading adobe premier pro fails. Writes that the installation is complete, some optional components are not installed correctly. What to do?

When downloading Adobe Premier pro fails, write that the installation is complete, some optional components are not installed correctly. What to do?

check your install logs for the problem, http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

When I download Photoshop CC I get everytime a message "Completed installation, some optional components are not installed correctly. (6)"

When I download Photoshop CC I get everytime a message "Completed installation, some optional components are not installed correctly. (6)"
What can i do?
I have Windows 8 and i7 with gtx760
Please help me

Please send me the installer logs to [email protected] from C:\Program Files (x86)\Common Files\Adobe\Installers
The file name would be like: Adobe Photoshhop cc 2014 15.0 <Date>.log
-Pragya

My apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

my apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

Must be serious because you have stated the problem 4 times now.
Here are a number of things that you can try and maybe one of them will help.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
You can also try going to the App Store, find an app that needs an update, tap on the app icon to bring up the description page, then tap on install that way, rather than using the Update option from the app updates screen.
And ... You can always install the updates in iTunes on your computer and then sync them to the iPad.

Why key figures are not displaying

Dear Experts,
I am faced with a problem not encountered before. My report has multiple key figures all of which are not displayed when I run the query. However if I change the view to Tabular format (from query properties) the key figures become visible.
Request your help in resolving the issue.

Hi,
are you hidden the some key figures? please check.
select the KF -> go to properties -> check the display tab - hide/show/hide can be shown.
if not close and open one more time in query designer.
Thanks,
Phani.

Sir, Google and yahoo and some other websites are not viewing correctly. Texts are not showing in englsih

Sir,
some websites are not opening correctly like Google and yahoo. please help

Did you create a new profile for that 4.0 beta version?
Do you still have the regular Firefox 3.6.8 version installed?
Create a new profile as a test to check if your current profile is causing the problems
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

In Query key figure are not populated

Hi Gurus,
i am using a RSCRMBAPI to get the out put of my query into a Ztable but when i run my program the Ztable is getting data but no key figures are getting populated.
plz help
thanks
neelu

Hi gurus,
i just have 1.6lac records with six keyfigures so i think its not the problem of limitation...
then can somebody help me how to get rid of this, no key figure values are getting populated
thanks and regards
Neel

Some Purchase Requistions are not being replanned during SNP Heuristics

Hi All,
Has anyone experienced any issue with purchase requisitions not being replanned during the SNP heuristics run (background or interactive). I have a product location combination and about half of the PRs are not being replanned and these are not fixed/firmed. When I say replannned I mean that they are not generating a new Purchase req. #. I have no idea why at this point. Any suggestions would be appreciated.
Regards,
Rumi

Rumi,
we faced a ismilar issue and figured out that the issue was due to the change in MoT for the Preq. The earlier Preqs were created with MoT 'Ship' which was then changed to 'Plane'. When we ran the heuristic the Preqs created with Ship were not recreated. This is a standard SAP APO behaviour.
I am sure that after deleting these preqs all subsequent runs would be working fine for you.
Nxet time if it happens consider what I have said, it could be a possible reason.
Abhi

SIS some key figures are displaying zero value

Dear all
Following Key Figures in Standard SIS tcode like MCTE, MCTA, etc. are displaying as zero
Incoming Return
Credit Memo
Credit memos qty
Returns items
Returns Quantity
MC+6 is displaying all the key Figures as zero.
What may be the reasons
Regards
Vipin

Dear Babubala
In MC26 I am getting below warning for Incom. Returns, Gross returns, Net Returns 1, Net Returns 2, Returns items, Returns Qty
Incom. returns: Updating with date field VDATU can be set up restrictively only
Message no. M!208
Diagnosis
While updating the key figure Incom. returns the data field MCVBAP-VDATU for the period determination is used.
Updating via MCVBAP-VDATU causes a different result online as for statistic data set up. Online, MCVBAP-VDATU is filled with the current date (SY-DATLO); during set up, however, it is filled with the creation date MCVBAP-ERDAT of the item.
By using VDATU document changes you can see in the statistics that this type of 'delta updating' cannot be reproduced by a statistic data set-up. During the set-up the data is updated in different periods as in online updating, thereby causing the change history to be lost.
Procedure
Be certain that this is the type of updating you want.
In MC26 the Credit Memo Update Setting is VD Billing document and Type of Updating is A Cumulative updating
while as in Credit memo pricing procedure there is no subtotal. How to maintain it in Pricing procedure and in MC26 because in MC26 after pressing the change button the system is displaying the following message "Maintenance of SAP standard updates not allowed"
Regards
Vipin

Virtual Key Figures- RSRT says Key Figures are not valid

Hi,
Getting the following mssg when I try to generate a query in RSRT for the first time after I have coded Virtual Key Figures.
For the characteristic that I am pulling the user entered data from:
/BIC/ZNEWEST is not a valid characteristic for InfoProvider 0QM_C08
Message no. BRAIN122
Diagnosis
"Customer enhancement RSR00002 or the implementation of BAdI RSR_OLAB_BADI delivers /BIC/ZNEWEST as the characteristic to be calculated. 1. is however not a valid key figure for Infoprovider 0QM_C08.
System response
/BIC/ZNEWEST is ignored.
Procedure
Check the exit."
From the key figure I am using this info to populate value:
"/BIC/ZKF3 is not a valid key figures for InfoProvider 0QM_C08
Message no. BRAIN121
Diagnosis
Customer enhancement RSR00002 or the implementation of BAdI RSR_OLAB_BADI delivers /BIC/ZKF3 as the key figure to be calculated. 1. is however not a valid key figure for Infoprovider 0QM_C08 or /BIC/ZKF3 references the key figure . In this case, the basic key figure l is enough to calculate in the exit.
System response
/BIC/ZKF3 is ignored.
Procedure
Check the exit."
Any help would be appreciated.
This is my first time using Virtual KF's.
Thanks,
Brandon

Hi Ajay,
Here is my code:
      FORM user_0QM_C08                                            *
--> L_S_RKB1D                                                      *
--> C_S_DATA                                                       *
FORM user_0QM_C08 USING l_s_rkb1d   TYPE rsr_s_rkb1d
                     CHANGING c_s_data TYPE any.
*-- Local data
DATA: l_n TYPE n,
        FIN1 like /bic/azqm_O5000-/BIC/ZPFINNT,
       FIN2 like /bic/azqm_O5000-/BIC/ZPFINNT,
       STAR1 like /bic/azqm_O5000-/BIC/ZPFINNT,
        STAR2 like /bic/azqm_O5000-/BIC/ZPFINNT,
        TASK type STRING.
*-- Field Symbols
FIELD-SYMBOLS <ZNEWEST>.
FIELD-SYMBOLS <ZOLDEST>.
FIELD-SYMBOLS <ZPSTARNT>.
FIELD-SYMBOLS <ZPFINNT>.
FIELD-SYMBOLS <ZKF3>.
FIELD-SYMBOLS <ZKF4>.
FIELD-SYMBOLS <0NOTIFICATN>.
*->>> Initial checks
SELECT SINGLE * FROM zvir_reports
         WHERE infocube = l_s_rkb1d-infocube
         AND    compid    = l_s_rkb1d-compid.
CHECK sy-subrc IS INITIAL.
*->>> Prepare the structure
ASSIGN COMPONENT g_pos_0QM_C08_ZNEWEST
    OF STRUCTURE c_s_data TO <ZNEWEST>.
ASSIGN COMPONENT g_pos_0QM_C08_ZOLDEST
    OF STRUCTURE c_s_data TO <ZOLDEST>.
ASSIGN COMPONENT g_pos_0QM_C08_ZPSTARNT
    OF STRUCTURE c_s_data TO <ZPSTARNT>.
ASSIGN COMPONENT g_pos_0QM_C08_ZPFINNT
    OF STRUCTURE c_s_data TO <ZPFINNT>.
ASSIGN COMPONENT g_pos_0QM_C08_0NOTIFICATN
    OF STRUCTURE c_s_data TO <0NOTIFICATN>.
*~~~>Changeable
ASSIGN COMPONENT g_pos_0QM_C08_zKF3
    OF STRUCTURE c_s_data TO <ZKF3>.
ASSIGN COMPONENT g_pos_0QM_C08_zKF4
    OF STRUCTURE c_s_data TO <ZKF4>.
*do not go thru code if user fields are blank.
IF <znewest> IS INITIAL OR <zoldest> IS INITIAL.
Exit.
Endif.
*-->>> Read general data
CLEAR: /BIC/AZQM_O5000, FIN1, FIN2, STAR1, STAR2, TASK.
TASK = 'SCM'.
get Start1 time
SELECT /BIC/ZPSTARNT   FROM /bic/azqm_O5000 INTO STAR1
         WHERE notificatn        EQ <0NOTIFICATN>
         AND    /bic/ZNEWEST      EQ <ZNEWEST>.
ENDSELECT.
Get Finish1 time
SELECT /BIC/ZPFINNT   FROM /bic/azqm_O5000 INTO FIN1
         WHERE notificatn        EQ <0NOTIFICATN>
         AND    /bic/ZNEWEST      EQ TASK.
ENDSELECT.
Get Finish2 time & Start2 time
SELECT /BIC/ZPFINNT /BIC/ZPSTARNT FROM /bic/azqm_O5000 INTO (FIN2 ,
STAR2)
         WHERE notificatn        EQ <0NOTIFICATN>
         AND    /bic/ZOLDEST      EQ <ZOLDEST>.
ENDSELECT.
*- Update key figures
<zKF3> = abs( FIN1 - STAR2 ).
<zKF4> = abs( STAR1 - FIN2 ).
ENDFORM.                    "user_0QM_C08
Thx

Some key figures are not being correctly reversed in the Change Log

Similar Messages

Maybe you are looking for