Some keys on my Hp notebook just stopped working...HELP!!!

The left Shift key, the Z,X,C,V,M, Space key and comma.

Sometimes electrical components needs to have all power sources removed and reintroduced to work properly. Try performing a hard reset first, if it doesn't work then we'll move to the next step.
To Perform A Hard Reset
Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for 5 seconds)
Disconnect the AC Adapter from the notebook.
Remove the battery from the bottom of the notebook. There will be a switch/button to eject the battery.
Wait at least 1 minute with all power sources disconnected.
Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

Similar Messages

Airport Extreme Card just stopped working -help!!

I've had my MacBook Pro since mid August with a built Airport Extreme Card. It has for most of the time been working fine with my Netgear router. Yesterday it just stopped working. The black bars aren't showing on the aiport, it keeps refusing to accept the WEP password.
I have tried switching the airport on and off, and have also switched off the router and re started it, all to no avail. The WEP password is correct.
I have a WIFI printer connection and the airport will not connect to that either.
This has happened once before about 6 weeks ago but I can't remember what I did, if anything, to remedy the situation.
I have 3 other laptops all working perfectly well on the system, and all printing from the printer without any problems.
Any suggestions before I and the laptop go hurtling through the first floor window?

Hello MiBy. Welcome to the Apple Discussions!
I've had my MacBook Pro since mid August with a built Airport Extreme Card. It has for most of the time been working fine with my Netgear router. Yesterday it just stopped working. The black bars aren't showing on the aiport, it keeps refusing to accept the WEP password.
Try resetting your MBP's PRAM ...
Reset the PRAM
o Shut down the computer.
o Turn on the computer.
o Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
o Hold the keys down until the computer restarts and you hear the startup sound for the second time.
o Release the keys.
(ref: Resetting your Mac's PRAM and NVRAM)

Airport Extreme 7.6.1 WiFi just stopped working, HELP!

Hi all,
not sure what is going on, but my Airport Extreme running 7.6.1 just stopped working over wifi. My desktop PC is wired to the Airport and it is running fine on the internet. My iOS devices, however (iPhone 4 and iPad 1) just won't work over wifi. My wife's blackberry is also not working over wifi.
I am running AirPort utility on the iPad and it can find and manage the AirPort base, but it says internet is not working (orange dot) which is not true, as I am typing this post on the PC wired to the AirPort.
I have tried to reload the AP to no avail. Have also tried to reload the iOS devices, to no avail.
What should I do? Seems like the bridge connection between the wifi network and the Ethernet port just died.
On a side note, 7.6.1 seems to be very unstable, my PS3 connection drops constantly, which never happened before. Can you point me to a more stable release?
Persio

Try restoring the factory settings of the AirPort Express and delete all profiles
you have set:
1 Unplug the AirPort Express.
2 With the tip of a straightened paper clip to hold the reset button while
plug the AirPort Express.
Wait until the status light stops blinking and then restart the base station.

My command z key just stopped working -HELP

Please help. I was working in InDesign CC and hit the Command z key. Everything froze. I had to restart and now command z doesn't work.

Just noticed my iMAC finder preferences are not working as well.
Does it sound like a MAC or Adobe issue?
I am not an IT person, just a simple designer. It takes me forever to get my preferences set. I have just started using my iMAC and Adobe CC since purchasing Dec. 2013. Looks like I should have stayed with good ole CS3.

My ipod touch just stopped working, help please :(

hi, I need some help with my ipod touch. i was using it and it was working just fine and i locked the screen and walked away came back to use it and the screen wouldn't unlock and it wouldn't even turn on. i plugged it in just to see if it needed to be charged and the screen wouldnt even light up or say that it was charging. is there anything I can do to get it to work again? or am i looking at having to buy a new one? if anyone has suggestions i would really appreciate it.
thanks so much,
Lauren

Try here:
iPod touch: Hardware troubleshooting

My keyboard just stopped working help mèeeeee

My key board wont work all buttons are dead

One or more keys on the keyboard do not respond
Unable to type while Mouse Keys is enabled
If keys on your keyboard don’t work
Dictation shortcut key may not work when Sticky Keys or Slow Keys are enabled
Key commands for Zoom and Invert Colors do not seem to work
If the numeric keypad doesn’t work
Use keyboard function keys
If you can’t use some keyboard shortcuts

I use to be able to autofocus my camera and it just stopped working help please

MMy phone won't autofocus anymore it says something like ac/af lock help please

I suspect an Apple server problem. Many users have been reporting problems with Messages and Facetime today.

5 ghz just stopped working - help

I've been running my original 1 TB Time Capsule connected to my cable modem in n only 5ghz for months.
I have Airport Extreme connected in another room connected to a couple of HP printers so we can print wirelessly.
And lastly an original Airport Express connected to the Time Capsule via ethernet cable to have g available for our iPhones.
All has been working flawlessly for months.
Today I closed my MacBook Pro and went out. Hours later I came back and opened my computer and it didn't seen the Time Capsule n. It wasn't even showing up in my Airport Menu. I could see the Airport Express g fine. And could connect and surf the web fine. But the Time Capsule was nonexistent as far as my computer was concerned.
So I restarted everything. Nothing. So I did a soft reset of the TC. Nothing. So I did a hard reset and reconfigured. Nothing.
So out of the only left to do was to set the TC in n only mode at 2.4 ghz. And my MacBook Pro sees the TC fine in 2.4 ghz. But in 5 ghz the TC is invisible. Even though this has been working fine and fast for many months.
Any ideas? Why 5 ghz only would not work? Why 2.4 n only works?
I'm at a loss. Could the 5ghz band "break"? But 2.4 ghz be fine?
Thanks.

My original time capsules 5GHz radio died about a month ago. It was out of warranty, so I'm using my airport express for the 5GHz band.
I don't think the radios in the TC are very good.

Why do some keyboard shortcuts just stop working?

Since upgrading to Lion, some of my keyboard shortcuts - especially one for Mail - just stops working now and then and the only thing I can figure out to fix it is to restart the macbook.
The main one I've had trouble with is ⌘+ enter to send a message.
It seems (unreal, I know) that certain messages disable it in replies.
Any other way you can think of to reset the keystroke other than restarting?
Thanks
Tom

Hi there
Sounds like the project has somehow become corrupt. You may need to create a new project and copy/paste slides. You may also find that this will transfer over the issue. So it could be limited to a specific slide or even a single object on a slide.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Ha

My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
Has anyone had that happen? Solution? (other than purchase a new one.......)

My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
Has anyone had that happen? Solution? (other than purchase a new one.......)

On both my desktop and notebook, sync just stops working and needs to be set up again! Although my account is still there ?

On both my desktop and notebook, sync just stops working and needs to be set up again! Although my account is still there ?
I have windows 7 on both computers and I use the paid version of Roboform (which does not encounter any problems!) So, I really need my sync to work and keep working. Please help......

Do you mean that after closing the browser your Sync set up is gone and you need to Set it up again?
This is, generally, because your privacy settings are too restrictive and you are deleting the password of your Sync account.
You can modify this in the Privacy tab of your Preferences/Options window. Select Remember History or Use Custom Settings in the drop down to configure the level that you want.

I'm having huge problems with my MBP (2010). Exposé just stopped working, both the key on the keyboard and the multitouch gesture stopped working. Does anyone have any idea why, or how to solve it?

Exposé just stopped working, both the key on the keyboard and the multitouch gesture gets no response. Does anyone have any idea why, or how to solve it?

I found a way to fix it. Simply restart the dock by using "killall Dock" in the terminal.
Cheers!

Apple AL Bluetooth Keyboard - Tab, Caps Lock, Function and Control keys just stopped working

Hi All -
All of a sudden I get on my baby, 27" iMac OSX 10.6 and the some keys on the bluetooth keyboard do not work. Specifially the Tab, Caps Lock, Function and Control keys. I'm fine with the caps lock gone (why is it there?) but the others are useful.
I've searched all over for a solution but I haven't found one. Tried to upgrade the firmware which is fine, reset the PRAM done, checked the speech per apple support nadda.
Please help.
Thanks
-M

Hi
Go to System preferances > Universal Access > Mouse or Mousie and trackpad > and turn your Mouse keys off.
Then disconnect and reconnect your keyboard.
Note that you don't open your mouse under hardware in System Preferances, this is for a whole different group of settings
Hope This helps

VPN working fine.... then just stopped working!

Have posted this before, but was hoping that someone out there has experienced the same issue.
I setup the VPN on 10.6 McMini server and it worked really well for several weeks. Then all of a sudden (without any changes being made to the server) it just stopped working!
I cant get a VPN connection either on the internal network (so no routers involved here) or from external clients. Both of these worked before. Im convinced its def something to do with the server.
The error I get is PPP Server could not be authenticated.
Have tried restarting server, stopping and starting VPN service, turning L2TP and PPP of and on again, changed the shared key.. Checked the DNS with changeip and that is all good....
Hopefully soemone out there will be able to shed some light on this for me...
Here is the log from the VPN :
2011-03-09 09:25:41 GMT Listening for connections...
2011-03-09 09:26:13 GMT Incoming call... Address given to client = 192.168.181.148
Wed Mar 9 09:26:13 2011 : Directory Services Authentication plugin initialized
Wed Mar 9 09:26:13 2011 : Directory Services Authorization plugin initialized
Wed Mar 9 09:26:13 2011 : L2TP incoming call in progress from '192.168.181.161'...
Wed Mar 9 09:26:13 2011 : L2TP received SCCRQ
Wed Mar 9 09:26:13 2011 : L2TP sent SCCRP
Wed Mar 9 09:26:13 2011 : L2TP received SCCCN
Wed Mar 9 09:26:13 2011 : L2TP received ICRQ
Wed Mar 9 09:26:13 2011 : L2TP sent ICRP
Wed Mar 9 09:26:13 2011 : L2TP received ICCN
Wed Mar 9 09:26:13 2011 : L2TP connection established.
Wed Mar 9 09:26:13 2011 : using link 0
Wed Mar 9 09:26:13 2011 : Using interface ppp0
Wed Mar 9 09:26:13 2011 : Connect: ppp0 <--> socket[34:18]
Wed Mar 9 09:26:13 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x5934b5e4> <pcomp> <accomp>]
Wed Mar 9 09:26:13 2011 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x239b96e4> <pcomp> <accomp>]
Wed Mar 9 09:26:13 2011 : lcp_reqci: returning CONFACK.
Wed Mar 9 09:26:13 2011 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x239b96e4> <pcomp> <accomp>]
Wed Mar 9 09:26:13 2011 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x5934b5e4> <pcomp> <accomp>]
Wed Mar 9 09:26:13 2011 : sent [LCP EchoReq id=0x0 magic=0x5934b5e4]
Wed Mar 9 09:26:13 2011 : sent [CHAP Challenge id=0x6e <497c45160158160c673b40066c697935>, name = "tabloidserver.farnham.fcn"]
Wed Mar 9 09:26:13 2011 : rcvd [LCP EchoReq id=0x0 magic=0x239b96e4]
Wed Mar 9 09:26:13 2011 : sent [LCP EchoRep id=0x0 magic=0x5934b5e4]
Wed Mar 9 09:26:13 2011 : rcvd [LCP EchoRep id=0x0 magic=0x239b96e4]
Wed Mar 9 09:26:13 2011 : rcvd [CHAP Response id=0x6e <b9b67750edb8186d6d48bc0b9d9405d000000000000000002f8f465d892860e169ed20ebab1d33 9aaace5ecd0eb28d0700>, name = "garnettgreen"]
Wed Mar 9 09:28:42 2011 : sent [CHAP Success id=0x6e "S=E6415BFDE46D35DD639BE513051169EEE28ECB44 M=Access granted"]
Wed Mar 9 09:28:42 2011 : CHAP peer authentication succeeded for garnettgreen
Wed Mar 9 09:28:42 2011 : DSAccessControl plugin: User 'garnettgreen' authorized for access
Wed Mar 9 09:28:42 2011 : sent [IPCP ConfReq id=0x1 <addr 192.168.181.122>]
Wed Mar 9 09:28:42 2011 : sent [ACSCP ConfReq id=0x1]
Wed Mar 9 09:28:42 2011 : L2TP received CDN
Wed Mar 9 09:28:42 2011 : L2TP hangup
Wed Mar 9 09:28:42 2011 : Connection terminated.
Wed Mar 9 09:28:42 2011 : rcvd [CHAP Response id=0x6e <b9b67750edb8186d6d48bc0b9d9405d000000000000000002f8f465d892860e169ed20ebab1d33 9aaace5ecd0eb28d0700>, name = "garnettgreen"]
Wed Mar 9 09:28:42 2011 : Connect time 2.5 minutes.
Wed Mar 9 09:28:42 2011 : Sent 0 bytes, received 0 bytes.
Wed Mar 9 09:28:42 2011 : L2TP disconnecting...
Wed Mar 9 09:28:42 2011 : L2TP sent CDN
Wed Mar 9 09:28:42 2011 : L2TP sent StopCCN
Wed Mar 9 09:28:42 2011 : L2TP disconnected
2011-03-09 09:28:42 GMT --> Client with address = 192.168.181.148 has hungup

My Server is OS X 10.6.8 Server, my clients ar all 10.7 but I tested today with an 10.6.6 and it did't work as well.
The protokoll says:
2011-07-28 20:51:28 CEST          Incoming call... Address given to client = 192.168.1.166
Thu Jul 28 20:51:28 2011 : Directory Services Authentication plugin initialized
Thu Jul 28 20:51:28 2011 : Directory Services Authorization plugin initialized
Thu Jul 28 20:51:28 2011 : L2TP incoming call in progress from '192.168.1.2'...
Thu Jul 28 20:51:28 2011 : L2TP received SCCRQ
Thu Jul 28 20:51:28 2011 : L2TP sent SCCRP
2011-07-28 20:51:29 CEST          Incoming call... Address given to client = 192.168.1.167
Thu Jul 28 20:51:29 2011 : Directory Services Authentication plugin initialized
Thu Jul 28 20:51:29 2011 : Directory Services Authorization plugin initialized
Thu Jul 28 20:51:29 2011 : L2TP incoming call in progress from '192.168.1.2'...
Thu Jul 28 20:51:29 2011 : L2TP received SCCRQ
Thu Jul 28 20:51:29 2011 : L2TP sent SCCRP
2011-07-28 20:51:31 CEST          Incoming call... Address given to client = 192.168.1.168
Thu Jul 28 20:51:31 2011 : Directory Services Authentication plugin initialized
Thu Jul 28 20:51:31 2011 : Directory Services Authorization plugin initialized
Thu Jul 28 20:51:31 2011 : L2TP incoming call in progress from '192.168.1.2'...
Thu Jul 28 20:51:31 2011 : L2TP received SCCRQ
Thu Jul 28 20:51:31 2011 : L2TP sent SCCRP
2011-07-28 20:51:35 CEST          Incoming call... Address given to client = 192.168.1.169
Thu Jul 28 20:51:35 2011 : Directory Services Authentication plugin initialized
Thu Jul 28 20:51:35 2011 : Directory Services Authorization plugin initialized
Thu Jul 28 20:51:35 2011 : L2TP incoming call in progress from '192.168.1.2'...
Thu Jul 28 20:51:35 2011 : L2TP received SCCRQ
Thu Jul 28 20:51:35 2011 : L2TP sent SCCRP
2011-07-28 20:51:39 CEST          Incoming call... Address given to client = 192.168.1.170
Thu Jul 28 20:51:39 2011 : Directory Services Authentication plugin initialized
Thu Jul 28 20:51:39 2011 : Directory Services Authorization plugin initialized
Thu Jul 28 20:51:39 2011 : L2TP incoming call in progress from '192.168.1.2'...
Thu Jul 28 20:51:39 2011 : L2TP received SCCRQ
Thu Jul 28 20:51:39 2011 : L2TP sent SCCRP
2011-07-28 20:51:43 CEST          Incoming call... Address given to client = 192.168.1.171
Thu Jul 28 20:51:43 2011 : Directory Services Authentication plugin initialized
Thu Jul 28 20:51:43 2011 : Directory Services Authorization plugin initialized
Thu Jul 28 20:51:43 2011 : L2TP incoming call in progress from '192.168.1.2'...
Thu Jul 28 20:51:43 2011 : L2TP received SCCRQ
Thu Jul 28 20:51:43 2011 : L2TP sent SCCRP
2011-07-28 20:51:47 CEST          Incoming call... Address given to client = 192.168.1.172
Thu Jul 28 20:51:47 2011 : Directory Services Authentication plugin initialized
Thu Jul 28 20:51:47 2011 : Directory Services Authorization plugin initialized
Thu Jul 28 20:51:47 2011 : L2TP incoming call in progress from '192.168.1.2'...
Thu Jul 28 20:51:47 2011 : L2TP received SCCRQ
Thu Jul 28 20:51:47 2011 : L2TP sent SCCRP
2011-07-28 20:51:48 CEST             --> Client with address = 192.168.1.166 has hungup
2011-07-28 20:51:49 CEST             --> Client with address = 192.168.1.167 has hungup
2011-07-28 20:51:51 CEST             --> Client with address = 192.168.1.168 has hungup
2011-07-28 20:51:55 CEST             --> Client with address = 192.168.1.169 has hungup
2011-07-28 20:51:59 CEST             --> Client with address = 192.168.1.170 has hungup
2011-07-28 20:52:03 CEST             --> Client with address = 192.168.1.171 has hungup
2011-07-28 20:52:07 CEST             --> Client with address = 192.168.1.172 has hungup
Thanks for any help!

2nd Nuron just stops working?

Our second Nuron just stopped working. First one did the same thing. I had been using it earlier tonight and checking the GPS features. It has been sitting on the table since then and now it is dead. Like there is no power. Nothing will make it turn on or show any life at all.
VERY Frustrating!! Aside from some alarm querks it has been a decent phone until it dies for no reason that we can see.
Has anyone else experienced this? Is there a fix for this?
Solved!
Go to Solution.

try removing SIM card and memory card. Then plug in the charger.
Does the Neuron wake up with the charger connected and start charging? It might take a few minutes if your battery was completely dead.
If yes the if you press and hold the power key can you get it to then power up?
If no then your Neuron is most likely totally dead
If it charges, but doesn't power up then it may be some corruption in the SW.

Some keys on my Hp notebook just stopped working...HELP!!!

Similar Messages

Maybe you are looking for