Some lines dont print when i print a form

When i print a page all the horizontal lines dont print on the page.Can someone help with this problem.I am using Acrobat Reader 7 and Vista.Thanks

> I am using Acrobat Reader 7 and Vista.
You should update your Adobe Reader.

Similar Messages

  • I have 1 HP Officejet J6480 All-in-one printer, when I print a page off of the net, it only prints o

    I have 1 HP Officejet J6480 All-in-one printer, when I print a page off of the net, it only prints one top line (ex: Page 1 of 1) and it only prints the footer. It does the same with my HP Deskjet F4100 series printer.

    Call and/or check HP Support website for updated drivers.  You can also check KB Articles:  http://support.apple.com/kb/HT3669 Printer and scanner software available for download
    and http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
    What to do when you can't print

  • Laserjet 2600n printer.when i print demo page coming, one page inside 1 and half print.

    i have hp colour laserjet 2600n printer.when i print demo page coming, one page inside 1 and half print. i need solve the problem please help me

    Your printer should have a little window on the top for you to set the Language, Power Setting, Paper Size and Print Quality etc.

  • Just wondering if anyone knows why these lines are showing when I print?

    Hi,
    I am new to Photoshop Elements and was wondering if anyone could help.  I do not want these lines around my image showing up when I print. I am using Elements 8, Epson Artisan 1430 printer and Windows 8.
    Thank-you!

    clctopoftheline wrote:
      I am just unable to get it sized correctly when I print from that application. 
    Use the crop tool. If the paper stock is 5x7, then crop the file to 5x7.
    clctopoftheline wrote:
    The paper has also been cropped and sized to the paper stock I am using. 
    I do not comprehend this.
    Additional suggestions:
    Be sure that you have the latest drivers for the printer. Check on the Epson web site
    Clean the printhead and align the cartridges under maintainance
    Make sure the size of paper loaded matches the paper size selected in PSE

  • I get fine black lines on my prints when i print my photos how do i get ride of them?

    I get fine, black, grid lines on my photos when i print, how do i remove the black lines?

    First run a print quality test. If that passes perfectly install the latest driver for the printer, even if you already have the latest driver installed.
    If the print test results are not perfect run nozzle cleaning routines until results are perfect.
    Sometimes an ink cartridge will fail, but before replacing an expensive cartridge run nozzle cleaning and print testing a dozen times.
    HTH
    -Allen

  • Some images do not print when in printed documentation

    I have been encountering this problem for over a year now...
    I maintain over 20 projects in RoboHelp HTML. I have numerous
    printed document layouts defined. However, in what appears to be
    random situations, some of my images do not print. They display
    online just fine, but they are not visible in the printed
    documentation. Only a blank gap displays where the image should
    display. And there is no conditional build tag applied to any of
    these images. The reason I think it is random is because, if I
    perform the following test, the images print just fine:
    - duplicate the printed documentation layout
    - remove, from the duplicate copy, all of the pages
    surrounding a page that contains an image that does not print
    - generate the duplicate copy

    I had a similar problem with missing images. I never really
    solved it, but it (apparently) went away. One thing which helped
    was ensuring that none of my images had filenames containing
    spaces.
    In addition, selecting Link images rather than Embed can be
    useful; missing images are then replaced by a red cross which makes
    it easier to locate the problem.
    Also, in Word, you should uncheck Tools > Options >
    Print > Update Fields (that is for Word 2003).
    --- Derek

  • Why does all the header info of an email get printed when I print out an email?

    Even when I print a short email, nearly a whole page is taken up with unwanted "header" information eg X-mailSG and several lines ogf gobblygook.?

    View menu (alt+V) > headers > normal.

  • "Error while printing" when sharing printer under 10.6

    This just started yesterday. When attempting to print from either of two other computers (both 10.4.11) to a printer (HP LJ 1160) connected via USB to a MacBook Pro (10.6.2), the print fails with the cryptic error message: "Error while printing."
    I have searched these help forums and have tried repairing permissions on all computers. I have also verified that the /tmp symbolic link is in place on all computers.
    I have also tried resetting the print systems on all computers. I am able to add the shared printer on the client computers, but when attempting to print to the selected shared printer I still get the error.
    The Console on the client computer generates the following items in the log:
    2010-01-18 08:59:49.452 TextEdit[423] PMSessionValidatePrintSettings failed (error code = -50)
    2010-01-18 08:59:50.812 TextEdit[423] Invalid PMPrintSettings in print info
    Any ideas?

    on the wife's g4 powerbook, added a network-shared printer, attempts to print to it result in:
    PMSessionValidatePrintSettings failed (error code = -50)
    Invalid PMPrintSettings in print info
    this same n-s-p works fine on my g4 powerbook, also 10.4.11...
    and i haven't been able to print to this printer from my core duo minimac running 10.6.2:
    3/1/10 6:55:37 PM AddPrinter[21005] Error loading /Library/Printers/hp/aio/PMs/hpaio_print_pm.plugin/Contents/MacOS/hp_aio_printpm: dlopen(/Library/Printers/hp/aio/PMs/hpaio_print_pm.plugin/Contents/MacOS/hp_aio_printpm, 262): no suitable image found. Did find: /Library/Printers/hp/aio/PMs/hpaio_print_pm.plugin/Contents/MacOS/hp_aio_printpm: mach-o, but wrong architecture
    3/1/10 6:55:37 PM AddPrinter[21005] Cannot find function pointer HPPMPluginFactory for factory 00425E6D-6656-11D7-966D-0003934BEDFE in CFBundle/CFPlugIn 0x1444f750 </Library/Printers/hp/aio/PMs/hpaio_printpm.plugin> (bundle, not loaded)

  • Why my smartform can't be printed when I print preview my layout?

    it always gave me a message that a spool request has been created, but when I select print it can't be printed in the printer, why? thank you in advance!

    Hi Dawson.
    I suggest you check the various available options to your problems in spool (output controller) administration by means of transaction,
    SPAD - Spool Admininstration as well as the test ones by transaction SPAT.
    Also alternatively check the transaction SP02.
    Best regards
    Harsh Dave

  • Error message Load paper in printer when I print a certain word document

    HP Officejet Pro 8500A on Windows Vista-32 bit
    Printer works great apart from when I try and print one word document or any other word document based on it
    I press print,printer tells me it's printing then I get the error message. "load paper in printer" when there is plenty of paer in it
    Other word documents and previous printer was OK
    Thanks

    Hi,
    As the issue occours with a specific document only, make sure to verify that any of the document settings are set correctly
    (e.g. the right paper size, the page margins, etc...)
    Additionaly, try copying the entire content of the document and paste into a new blank document, try printing the new document and check for any change.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Two sided printing when I print multiple pages

    Don't know what happened but all of a sudden when I print multiple pages, it prints double sided. Doesn't matter if I go into preferences and click one sided, it still prints double. I have a MAC, vers 10.9.5 and it looks like my adobe acrobat pro looks like vers 8,   Can any help this village idiot? Ready to pull my hair out or throw this huge peice of equipment out the window. Oh, and at intervals a window comes up for Adobe updates and it says, not online--while I am online. Apple can't even help me. Thanks a million.

    Not sure what type of printer you are using or environment you are in (corporate workgroup) but it is possible someone set the printer defaults to two-sided.

  • Problem printing when spool print documents is selected as apposed to print direct

    I have an officejet 6500 and I'm having a problem printing a label created using Label Factory Deluxe software.  The job will not print if spool print documents so that printing finishes faster is selected under the printer properties.  The job appears to be sent to the printer.  The printer icon appears in the task tray for less than a second and the printer makes a trill sounding beep but nothing prints.  In addition there is nothing in the print que.  It will print however, if print directly to the printer is selected.  Any ideas???

    Hello,
    Well with out any info on versions the easiest way is to check the Not Printer Option on in the Page Setup of the Report.
    Don

  • Some of the times when I print a document from the internet using my Adobe Acrobat 8 Pro printer, the letters appear in the PDF as symbols, How do I correct the problem?

    On many documents that I try and print from the internet such as receipts, conformations, etc, using my Adobe Acrobat 8 Professional printer, the PDF shows some if not all the letters as symbols.  I think it might be font issue, but do not know how to fix the problem.  Any suggestions.
    On another issue, can a Tiff file of my signature be inserted in a PDF?

    Hello,
    For 1st issue please follow the steps in given article:
    Missing or Garbled Text Printing from IE9 to Adobe PDF Printer
    For 2nd issue:
    You can create a signature appearance:
    For example, you can include your scanned signature.
    1  (Optional) Save the desired image on a page by itself, and convert the page to PDF.
    2  Choose Edit > Preferences (Windows) or Acrobat (Mac OS) > Preferences, and select Security.
    3  Click New, and type a title.
    4  (Optional) Select Imported Graphic, click File, and select the desired file.
    5  Specify options as desired.
    Regards,
    Anoop

  • How do I get to print when my printer says "off line" ?

    My HP Deskjet D4360 is plugged in and has 2 bars of colored ink and 1 bar of black ink showing on the printer; yet when I first turn on the printer, the golden ink drop flashes for 2-3 times and disappears. Does this mean that I still have to replace the ink cartridges now even though it shows bars of ink. When I go into the "help" area it said that ink levels are not available. Presently it isn't printing but haven't had a problem prior to this. Thanks.

    Hi ljzimprich!
    To have a better understanding of your issue, please let everyone know which model printer you own and what operating system you are connecting it to. That way, community will be able to assist you with suggestions appropriate for your product.
    Thanks!

  • How do I fix my printer when it prints at different places on page?

    Thanks in advance,
    Setup:
    HP Photosmart C4280
    Windows XP Service Pac 2
    Office 2007
    Adobe Bundle CS2
    Details:
    I have preprinted forms on 4x6 semi-gloss paper.
    I have attemtped to print in the blank fields.
    When I press print, the printer does not consistenty begin in the same place,
    so adjusting the document/image is not applicable as it is not printing in the same place.
    I have attempted to print from Illustrator, photoshop, acrobat, word, & windows picture and fax viewer
    and got the same results.
    Printing on letter sized paper works great (and I love the printer by the way).
    Is there a hardware problem, or is it  software/driver issues?
    How do I fix this?
    Thanks again for any help.
    This question was solved.
    View Solution.

    I would suspect this is a hardware issue.  The rollers are probably having issues picking up the relatively smooth thick media.  You might have better results be cleaning the paper pickup rollers with a damp paper towel.  Also make sure the paper is snugly loaded and the paper guides have been correctly positioned.
    Regards,
    Bob Headrick, MS MVP Printing/Imaging
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for

  • I can't sign in to my BB id

    Hi there, I took control of my dad's BlackBerry Torch (not sure what model, the previous one most likely) but I can't seem to log in to BB appworld, the message it gives me is as follows "unable to log into your BB I'd account" it's **bleep** me off

  • Can't get Themes to work for movie using iMovie on ipad

    I finsished a trailer using iMovie on my iPad successfully and LOVED it! Sooo fun! Now I'm trying to make a movie for a friend's wedding, but I can't get it to work with the themes. When I select my theme and start a new project using a few pictures

  • URLConnection Class

    Hey everyone im making a program that involves making a url connection. I create the URL object and then the URLConnection object, but when i go to find out hte contentlength, it always returns negative one. i think that the problem is that the url c

  • Window Switching Shortcut Does Not Work

    Ever since I switched to Snow Leopard, my precious cmd+` command no longer cycles through windows within applications. If I look at my keyboard shortcuts this should work in all application but it only works in Finder. Am I missing something? Thanks!

  • Upgrading graphics card on a Lenovo 3000 N500 laptop

    Is a 'BFG - NVIDIA GeForce 9800 GTX+ OC 1GB GDDR3 PCI Express Graphics Card' compatible with this laptop? If not, which type of card should I look for to be compatible? And how do I install it? Right now I have 2 'Mobile Intel 4 Series Express Chipse