Some links are not working when i click on them

I will click on a link and it loads and then nothing. The only way I can open it is to open link in new tab. This has been happening since the new updates. Very frustrating as I have to resort to Google Chrome in order to not have to deal with this. Lots of links will not open.

Nothing in header. Email from booking.com. Richard

Similar Messages

  • Since upgrading to Firefox 27.0 some webpages will not load when I click on them. It gives me a message saying that Firefox can't find the server.

    Since upgrading to Firefox 27.0 some webpages will not load when I click on them. It gives me a message saying that Firefox can't find the server. I have to click the link several time before it will load and sometimes when they do load it does not show the page right. It is like the HTML is messed up or something. I have tried everything I can think of. I started in safe mode, still did it., I removed add-ons, still did it., I reset Firefox and still did it., I completely uninstalled Firefox and re-installed Firefox and it still does it. I have tried Malware Bytes Anti-Malware scans and Avast boot-time scans and found no malware or viruses. I have found that those websites open the first time with no problems on my IE9 and they used to do so in Firefox 26.0. I'm at my wit's end. The website links are in my bookmarks and are used all the time so they are trusted and my avast is set to allow them. They range from news websites to gun websites and everything I have read says that Mozilla does not filter those unless something has changed recently.

    Try this as a first step;<BR><BR>
    Clear the Cache '''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''<BR><BR>
    and<BR><BR>
    Remove Cookies '''''Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"'''''<BR><BR>
    If there is still a problem,
    '''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
    While you are in safe mode;
    '''''Firefox Options > Advanced > General'''''. Look for and turn off '''Use Hardware Acceleration'''.

  • HT2500 links will not open when I click on them in email

    links will not open when I click on them in email

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]<br />
    <br />
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • My flash links are not working when it is www request

    Dear Friends,
    We have done one application for the mobiles..in that we have used flash xml menu. In my xml menu i have mentioned the urls with www. request.
    When its http://www.xyz.com menu links are not working.
    If its http://xyz.com  my menu links are working fine. Can you please suggest me once how can i achive this.

    How did you fix it?

  • Captivate 5.5 project -links are not working when i publish to the IE server

    I was wondering if someone had a solution to my Captivate 5.5 project with external links. 
    Here is my problem:
    I have a page that has an external link that opens another window. 
    For some reason the window will open in preview.  However, when I publish to the IE browser it does not work. 
    Does someone have a solution to this problem?  I saw some verbiage that stated adjusting something swf file.  I don't quite understand were to change this file.  Is it in Captivate?
    Any information you have is greatly appreciated.
    Thank you!
    Kat

    Google for information about Flash Global Security.
    It looks like you need to trust the publish folder location as a trusted location in your Flash Global Security settings.

  • Some links are not working

    Could someone please look at the code on this page.  The Home link and the Prices link work in the table on the left but the other links in that table do not work.  I can't figure out what is wrong, perhaps another set of eyes can spot it.
    Any help would be appreciated.
    Thank you,
    Judy B

    Remove this from your code -
    <div id="Layer1" style="position:absolute; width:331px; height:270px; z-index:1; left: 383px; top: 204px;"></div>
    You don't need it, and it's masking those links that "don't work" so that the hover never kicks in.

  • Several links will not open when I click on them.

    this happens several times. I don't know if it is related to the numb er of times or not, but ususally when I try to open a new link after clicking on the first link to a new page, nothing happens.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]<br />
    <br />
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • When I open a PDF page that has links they do not open when I click on them

    When I open a PDF page in Firefox 4.0 that has links, the links will not open when I click on them. If I try that in Safari, or when I had the earlier versions of FF, I had no problem. Is this just a setting issue?

    That is a limitation of iOS. They will view correctly when you view them in Adobe Reader or Adobe Acrobat.

  • Dynamic drill link is not working when i substitute some parameters in Plus

    Hi Gurus,
    Dynamic drill link is not working when i substitute some parameters in Discoverer plus(Tools--->Manage Links--->Edit links--->Parameters options), when i substitute some parameters it working when i click on drill value the link is popping up to go another worksheet.For some parameters link is not popping up. Could you please give any ideas.
    Thanks & Regards
    Vikram

    Hi Vikram
    Oh gosh, me and my big mouth!
    Patch 5381032 has two references to issues with links. You might want to discuss your scenario with Oracle and ask them if this patch would resolve your issue.
    Another solution would be to upgrade to 10.1.2.2 (available as a patch on MetaLink) which has most of the fixes from all of the patches applied. Again I would advise you speak with Oracle Support as they are the only one who can actually confirm whether this particular issue was fixed in this release.
    Are you by any chance seeing zero numbers display as 00 and are you seeing any graying out of icons? If so, then patch 5345595 (sometimes referred to as 5345528) fixes this and is a good patch to apply if you haven't already done so.
    All of these patches require a password which can only be obtained from Oracle by raising a service request to Support and stating the issues that you have.
    Hope this helps
    Regards
    Michael

  • I have a Excel file which has lots of PDFs embed as a link.  When i converting to PDF the embed links are not working. Please help to slove this issue.

    I have a Excel file which has lots of PDFs embed as a link.  When i converting to PDF the embed links are not working. Please help to slove this issue.e

    I am also looking alternative way using inDesign to create the embed link as like as excel. is there any possible? Thanks for you reply

  • Some Keys are not working on Lenovo G570

    Hello all
    I am new here, looking for some help regarding my Lenovo G570.
    Yesterday, it was working perfectly, I properly shut is down. I have set a BIOS pasword.
    Today, when I switch it on, I was unable to type the pasword becasu some keys were not working. However, I managed to loged in with the help of On Screen Keyboard. After analysing it, I came to know that some keys on numpad includeing 0,2 and on the 2nd line(vertical numerical keys) 1,2,3,4,7,8,9,0 are not working. I tried to re-install the OS but I set a BIOS paswoed containing one of the missing keys.
    Please let me know whether it is a software problem or should i take my laptop to some repairing shop?
    Thanks  
    Solved!
    Go to Solution.

    Hi Asadkhan92,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing an issue with the keyboard in your Lenovo G570 laptop.
    As you have mentioned that the some keys are not working in your laptop, as you have also mentioned that the onscreen keyboard is working, please connect the external keyboard and check  for the issue, this is to confirm if the issue with the hardware or software.
    If the external keyboard works fine and if the keypad is not working then it’s a issue with the keypad of the laptop.  
    Please visit the nearest service centre for further details.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Hope this helps! 
    Best regards,
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Transferred CS4 to new MacBook Pro, now some fonts will not work when PDFing documents from InDesign CS4. Help!

    I recently purchased a new MacBook Pro. I transferred my CS4 from my older MacBook Pro to my new computer, and although it seemed to be working fine now some fonts will not work when PDFing documents from InDesign CS4. These fonts are installed on my new computer, can be found in InDesign CS4, and work fine within the program but will not appear in PDFs. The letters turn into rectangles. Does anyone know why, and how to fix that?
    Help/input would be much appreciated. Thank you!
    Kristen.

    you should properly install adobe products, not move, migrate or otherwise transfer them.
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • All hyperlinks are not working when published

    All of the links work on iweb 09; however, when published some of the links are not working. To get an idea of what I mean you can go to the site, thinkwhatif.org and see it. Would someone be able to provide an answer how to solve it? I have unlinked and relinked too and that didn't work (at least the one time I did it).
    Thanks in advance for helping me figure it out.
    I am learning..

    Bonjour,
    It's a layout issue. Two of your buttons (who or what) are in the navigation part of your page (nav_layer), which is back layer of your page. In your page, the content (body_layer) overlays the bottom of this layer (nav_layer) where the buttons are.
    !http://i22.servimg.com/u/f22/09/02/44/99/layout10.jpg!
    Show layout (iWeb > View > Show layout) and replace the buttons in the content. As you can see , you 've got also a empty textbox in the content

  • The figure links are not working

    The figure links are not working in the latest ADE 4.0.3. The same ePUB figure links are worked perfectly in ADE 3.0.

    Your navigation is covering some of your links. You should send the image to the back & or crop it to just the red box.
    How I create navigation menus:
    http://jeffnitschke.com/Video.html

  • Some Calculations are not working in Discoverer 10g after upgrade from 4.1

    Hi Gurus,
    We are recently upgraded Oracle Discovere 10g from 4.1, some calculations are not working in Discoverer 10g. I appreciate if you could fix below calculation(s) in 10g.
    CASE WHEN TRUNC("Expenditure Item Month") = '31-JAN2007' THEN SUM(Wtd Qty A) WHEN TRUNC("Expenditure Item Month") = '28-FEB-2007' THEN SUM(Wtd Qty A) WHEN TRUNC("Expenditure Item Month") = '31-MAR-2007' THEN SUM(Wtd Qty A) END
    Thanks & Regards
    Vikram

    Sabra,
    Not sure exactly what this might be... there could be an issue there.
    Please make sure that you review the upgrade.log. Are there any errors / warnings?
    Also, you might wanna peek the Metalink Note:262623.1 - Master Note for OracleAS Portal Upgrade Issues, where you'll find some nice things where to start looking at.
    Later you may wanna open a Service Request into the Oracle Support.
    I hope it helps...
    Cheers,
    Pedro.

Maybe you are looking for