Some Matrox Effects giving problem

Hi All,
I am running Adobe Premiere Pro CS 5.0.3 with Matrox MX02 LE and MtxUtils Tools 5.1.1. System has Win7 x64 and NVidia Quadro 4000 graphics card.
There are some effects such as mask or most filters except Black and White filter that do not apply when put on a clip. I want to confirm if it needs some further installation. This is my first setup of MX02 LE with CS5.
As I notice in my previous systems with RT.X2 old versions of MtxUtils 4 were over 2.5 GB which decreased to 450MB in ver. 5 of MtxUtils, while current 5.0 or 5.1 tools for MX02 LE is 211 MB, so possibly there is some separate installation package to support more Effects.
Thanks and Regards,
Yasir

As additional info to above post, when I check for avaialble Matrox Effects it shows very few in the list. It seem something is missing, so if anyone could help. Below is image showing currently avaiable Matrox Effects.

Similar Messages

[svn:fx-trunk] 10229: Fixes for some transform effects problems.

Revision: 10229
Author:   [email protected]
Date:     2009-09-14 08:43:43 -0700 (Mon, 14 Sep 2009)
Log Message:
Fixes for some transform effects problems.
- We were not animating the postLayout properties in some cases where we should have, effectively pinning the object in place. We now animate those properties whenever applyChangesPostLayout is true.
- A copy/paste error meant that we did not animate the scaleZ property in cases where we should have.
- A problem in the transform code means that using a null transform center is not the same as a transform center which uses the transformX/Y/Z properties of the target object. We now force the creation/use of a transform center in all cases to avoid that problem.
QE notes: This breaks about a dozen tests in the transform effects area, but I believe the new results are correct and the tests/bitmaps should be changed.
Doc notes: None
Bugs: sdk-23177
Reviewer: Hans
Tests run: checkintests, Mustella transform effects
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/sdk-23177
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/AnimateTransform.as

SHARED MEMORY AND DATABASE MEMORY giving problem.

Hello Friends,
I am facing problem with EXPORT MEMORY and IMPORT MEMORY.
I have developed one program which will EXPORT the internal table and some variables to the memory.This program will call another program via background job. IMPORT memory used in another program to get the first program data.
This IMPORT command is working perfect in foreground. But it is not working in background.
So, I have reviewed couple of forums and I tried both SHARED MEMORY AND DATABASE MEMORY. But no use. Still background is giving problem.
When I remove VIA JOB parameter in the SUBMIT statement it is working. But i need to execute this program in background via background job. Please help me . what should I do?
pls find the below code of mine.
option1
EXPORT TAB = ITAB
       TO DATABASE indx(Z1)
            FROM   w_indx
            CLIENT sy-mandt
            ID     'XYZ'.
option2
EXPORT ITAB   FROM ITAB
TO SHARED MEMORY indx(Z1)
FROM w_indx
CLIENT sy-mandt
ID 'XYZ'.
   SUBMIT   ZPROG2   TO SAP-SPOOL
                  SPOOL PARAMETERS print_parameters
                   WITHOUT SPOOL DYNPRO
      *_VIA JOB name NUMBER number*_
                   AND RETURN.
===
Hope every bidy understood the problem.
my sincere request is ... pls post only relavent answer. do not post dummy answer for points.
Thanks
Raghu

Hi.
You can not exchange data between your programs using ABAP memory, because this memory is shared between objects within the same internal session.
When you call your report using VIA JOB, a new session is created.
Instead of using EXPORT and IMPORT to memory, put both programs into the same Function Group, and use global data objects of the _TOP include to exchange data.
Another option, is to use SPA/GPA parameters (SET PARAMETER ID / GET PARAMETER ID), because SAP memory it is available between all open sessions. Of course, it depends on wich type of data you want to export.
Hope it was helpful,
Kind regards.
F.S.A.

Fullname giving problem

Hi,
I am getting problem while setting the fullname attribute of the user while creating and assigning the resources [AD,Domino,LDAP]. i am using PeopleSoftActiveSync Resource, which is our Authoritative source. whenever a new entry comes to PeopleSoft, i have to create an Account in IDM and to all the resources. I am using Process Rule to call the create WorkFlow from where i am calling different Sub Process for creating resources. but some of the resources are giving problem and the error which i am getting using "WF_ACTION_ERROR" says "Missing required Attribute Fullname".
Eventhough i am setting fullname attribute while creating the IDM account. But the resources are assigned properly.
Please help me.....

Hello Srinivasa
Two years ago I had the very same problem when I added a new field to an already existing and filled customer table. I debugged the maintenance view and saw that the new field contained an undefined value but not the initial value.
You could try and use the DB utility (<b>SE14</b>) and activate the table again (of course without deleting the table entries).
Alternatively, you could write a simple ABAP to initialize the field value, e.g.:
DATA:
gs_mchb   TYPE mchb,
gt_mchb    TYPE STANDARD TABLE OF mchb.
SELECT * INTO TABLE gt_mchb.
gs_mchb-zvbeln_inquiry = ' '. " space
MODIFY gt_mchb FROM gs_mchb
    TRANSPORTING zvbeln_inquiry
    WHERE ( zvbeln_inquiry ne ' ' ).
UPDATE mchb FROM TABLE gt_mchb.
Regards
Uwe

I am having Macbook Pro, I have recently tried updating my operating system to OS Yosemite, but after that its giving problem in connecting to Wifi. The error is "Connection Time out Occurred". Its getting connected by Ethernet cable.

I am having Macbook Pro, I have recently tried updating my operating system to OS Yosemite, but after that its giving problem in connecting to Wifi. The error is "Connection Time out Occurred". Its getting connected by Ethernet cable.

Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
Step 1
Turn Wi-Fi off and back on.
Step 2
Restart the router and the computer. Many problems are solved that way.
Step 3
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 4
Run the Network Diagnostics assistant.
Step 5
In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
Step 6
Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 7
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 8
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
Step 9
Reset the System Management Controller (SMC).

Some KDE effects broke after latest upgrades

Hi all
After upgrading xorg, intel, qt, some KDE effects are broken. So far, I've found that window highlighting in the taskbar and expose windows are broken. Instead of the window contents, there's a bright white space. Anyone else with this?
EDIT: Apart from the above problems, there were also screen flashes and performance was generally awful. I just reverted back to the old xorg and intel packages and kept only the newest qt. It makes me sad that every newest xorg and intel release is much worse than previous versions... .
Last edited by panosk (2010-09-29 13:40:27)

Are you using compositing? The Intel drivers seem to be broken with regards to OpenGl. You will need to use indirect rendering for now. Personally, I had much better luck with compiz than with kwin. Compiz also requires thast it run with indirect rendering, but the performance seems to be at least an order of magnitude faster.
The only I saw problem with compiz and KDE is that autohide trays don't play nicely with compiz.
As for me, this was the straw that broke the camel's back and sent me packing for Xfce + compiz.

[VIA] Just need some input on a problem I have

I need the experts on this forum to help me with a problem I have. The M/B (6590 KT4 Socket A) had a few problems a while see. Since that time I have not updated my PSU as advised so I expect some abuse for that .
Any way I managed in the to fix that problem as you can see. However a further problem occured which was that the PC ,at will , would restart - this ended being the reset switch which I disconnected and this has never happened since. Now I have another problem ! .
The PC will simply hang with no response at all. It seems only to happen when I am running the capture software. I have checked for updates and applied these to the program (hauppauges WnTV). This set up was running on another PC with a M/B (in my opinon) of inferior quality without a problem (I have since sold that PC).
I will admit I have not run the PC without this program running to see if that is the cause. However I just needed input on suggestions. My PSU is as I said earlier the same as before which is an X Pro 400w these are the shameful Voltage rails :
+5v = 35a
+12v = 20a
-5v = 0.5v
-12v = 0.8v
3.3v = 22a
5+VSB=3a
Also when the PC hung I got the following readings from PCAlert:
1.76 Vcore
3.3v = 3.26v
+5v= 4.97
+12v = 12.24
CPU temp = 44c
System temp = 38c
I must admit that the previous PC had a separate USB2 (which is how the Happauge unit connects) card whereas this PC I use the onboard card. I was also thinking about the RAM as it was one I bought from a computer fair (hears groans) - This is normally something I do not do.
Help input would be appreciated

Quote from: Dr Stu on 26-November-05, 05:58:45
look on the PSU label for the Max Combined Watts 3.3v & 5v and post what it says
KT4 doesn't have a 4pin 12v connector, right? so that board depends on 3.3v and 5v rails
The Max watts are 210Watts
Quote
While waiting for the experts, three things come to my mind:
- IRQ problem, most often some/the card is in the wrong slot.
- Graphics driver, most often you have updated too far.
- Memory problem, most often mixed, but could also be there are things/drivers meeting in the memory that doesn't like eachother. If you have a lot of Autostarting thing that could be the reason, like a CD copying program and the capture program.
It cannot be an IRQ conflict as the Capture card is USB2. Graphics card has up to date drivers. Startup software on this PC is no different to the preivous apart from PCAlert4
Quote
"...It seems only to happen when I am running the capture software..." Have you tried another program system intensive demanding ? If you have done, and nothing happens, it would show that the capture device/driver is giving problems. Is that USB device self powered or takes it's power from USB port ? It's running at USB 2.0 speed ? 22 A to 3.3v. rail is poor for your Mobo. You should post your complete PC specs.
I dont really have any other software than can do that. The USB device is powered by itself.
PC is as follows:
AMD 2100+
1 512mb ram
2 HDD - 1 80gb Hitachi 1 120gb hitachi
Nvidia Geforce mmx 64mb ram Graphics card
1 SCSI CDROM Teac
1 SCSI CDRW Yamaha
1 IDE DVDROM Sony
1 IDE DVDR LG
Quote
Make sure that the pathway to were you want to save the captured video is set correctly. I believe you can set the Audio quality and the Frames Per Second (FPS) and I think that you can set the compression, If in doubt try it without compression and see if that works. I too have a TV card and it seems to me that you are having a config problem. Hope that helps.
The location where the files are captured to is to the secondary drive which is the 120gb
Hope thats enough information

I need to upgrade my 10.5.1 os on my G4/1.25 (I'm having some audio-midi setup problems), but it's a machine that is not connected to the internet. Do I have any options? Thanks!

Friends,
I'm having some audio-midi setup problems on my G4/1.25/10.5.1 machine. I'm thinking that a routine OS upgrade might help. However, this machine is not connected to the internet. Are there any alternate methods for upgrading system software? Thanks in advance!

OK, what you should do is download the updates on another machine and burn them to a disc. Start at this link http://support.apple.com/downloads/#leopard for downloads and find, among other things, the 10.5.8 combo updater that works on PPC machines, plus security, QuickTime and other updates. Going from 10.5.1 to 10.5.8, there will probably be a bunch of things that you should install. Being off the internet with the machine, you can't have Software Update sort it out, so something might get missed, unfortunately.
My suggestion is this: if it looks like you might need a download, get it onto that disc.

Firefox is slow to shutdown and therefore cannot open again for a few minutes or a restart.This is on 2 different PC's 1 running XP and the other Windows 7.Could you throw some light on this problem Thanks

Firefox is slow to shutdown and therefore cannot open again for a few minutes or a restart.This is on 2 different PC's 1 running XP and the other Windows 7.Could you throw some light on this problem Latest version running Thanks

Please see this article: [[Firefox hangs]]

Powerpoint presentation I have stored in icloud until recently were syncing to Keynote on my iPad with no problem. Now when I open Keynote on my iPad there is nothing. I could use some help with this problem.

powerpoint presentation I have stored in icloud until recently were syncing to Keynote on my iPad with no problem. Now when I open Keynote on my iPad there is nothing. I could use some help with this problem.

Morning AndreD86,
Thanks for using Apple Support Communities.
These articles explain exactly what is backed up by using their method.
iTunes: About iOS backups
http://support.apple.com/kb/ht4946
and
iCloud: Backup and restore overview
http://support.apple.com/kb/ht4859
Also we want to double-click the Home button and swipe the Task Bar to the right.
Then make sure the button on the far left of Task Bar is not muted.
Best of luck,
Mario

I use itunes on a Dell XPS502 with W7/64. In some cases have have problems to import CD's. The sound is very disturbed and the import need a lot more time than in normal cases. Is there a problem between itunes W7/64 or a known hardware issue?

I use itunes on a Dell XPS502 with W7/64. In some cases have have problems to import CD's. The sound is very disturbed and the import need a lot more time than in normal cases. Is there a problem between itunes and W7/64 or a known hardware issue?
Example-CD : "Tracy Chapman , Telling stories" is not able to import . I have more such negative cases. But in other cases it works fine and the sound is great.
The firmware at the inbuild CD/DVD DS-6E2SH is the latest version.
What can I do??

hi b noir,
I don't no about virtuel drives like you mententioned. In the mean time I have rebooted the XPS and run again the iTunes diagnostics. I think the back - chance in the registry was not ready to use. Now there are another results. They are the same in case of a running CD or a not running CD. The difference in total is like before. It takes more time that iTunes reads the (bad) CD and at the there is no good sound. In both cases ( running or not running CD) iTunes diagnostics gives as a result :
(the copie from ITunes shows the result of the not running CD from Tracy Chapman)
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Dell Inc. Dell System XPS L502X
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater-Bibliothek 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Treiber 1.55.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes-Seriennummer 00D7B2B00CD25750
Aktueller Benutzer ist kein Administrator.
Aktuelles Datum und Uhrzeit sind 2011-06-11 19:33:22.
iTunes befindet sich nicht im abgesicherten Modus.
WebKit Accelerated Compositing ist aktiviert.
HDCP wird unterstützt.
Core Media wird unterstützt.
Info zu Video-Anzeige
NVIDIA, NVIDIA GeForce GT 540M
Intel Corporation, Intel(R) HD Graphics Family
**** Info für externe Plug-Ins ****
Keine externen Plug-Ins installiert.
iPodService 10.3.1.55 (x64) arbeitet zurzeit.
iTunesHelper 10.3.1.55 arbeitet zurzeit.
Apple Mobile Device service 3.3.0.0 arbeitet zurzeit.
**** CD/DVD-Laufwerkstests****
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
D: PLDS DVDRWBD DS-6E2SH, Rev CD11
Audio-CD im Laufwerk
11 Titel auf der CD gefunden, Spieldauer: 42:07 auf Audio-CD
Titel 1, Startzeit: 00:02:00
Titel 2, Startzeit: 03:59:47
Titel 3, Startzeit: 07:19:27
Titel 4, Startzeit: 11:31:30
Titel 5, Startzeit: 15:31:50
Titel 6, Startzeit: 20:07:50
Titel 7, Startzeit: 24:27:15
Titel 8, Startzeit: 27:49:10
Titel 9, Startzeit: 32:41:25
Titel 10, Startzeit: 35:29:65
Titel 11, Startzeit: 38:38:00
Audio-CD erfolgreich gelesen (Suche nach alter Firmware).
Laufwerksgeschwindigkeit erfolgreich erkannt
Die CDR-Geschwindigkeiten des Laufwerks sind: 4 10 16 24
Die CDRW-Geschwindigkeiten des Laufwerks sind: 4
Die DVDR-Geschwindigkeiten des Laufwerks sind: 4
Die DVDRW-Geschwindigkeiten des Laufwerks sind: 4
After starting the import it is going slower and slower. If it is helpful I can send you a soundfile with these distortions.
best regards
tcgerd

Playback has frozen in Premiere Pro CS6, it started when I added some after effects compositions to

Playback has frozen in Premiere Pro CS6. I am running a 1080p timeline and it appeared to start when I added some after effects renders to my timeline. The playback head still runs through the timeline and audio plays normally but the video completely stops and cannot be viewed in real time.
I have plenty of memory and a very good graphics card running 64Bit Windows 7.

Red, yellow, and green render bars and what they mean
http://blogs.adobe.com/premierepro/2011/02/red-yellow-and-green-render-bars.html

I purchased photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in december 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can

I purchased Photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in December 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can someone please tell me how i process canon 7D mk11 photos ?????. (is it possible to bypass camera raw and open the photo straight into CS5 without using camera raw first. if so how do i do that. if not how do i process pictures).
Thank you.
Brian in the UK.

Photoshop by itself cannot process raw image data. That is why the Camera Raw plug-in was developed. You could try the DNG converter and convert your images to the DNG format and then the Camera Raw that you have would be able to open them. I can't recommend Lightroom because you are using Vista, and Lightroom 5 cannot be used with that operating system. It may be time for you to get a new computer and upgrade your software.

HT1222 I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit

I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit and sometimes it vanishes automatically. I,m confused.
Secondly i have an update IOS 7.0.4 waiting in my Software Update menu. I have tried so many times to update my iphone but it always fails to update the IOS 7.0.4. Any body suggest anything regarding this

Wow. Lots of help. Thanks apple

I have been using xfinity for some time with no problem. Now when I open it, it shuts down. I have reset, restarted, and done a sync. I also deleted and reloaded to no avail

I have been using the xfinity ap for some time with no problem. Now every time I open the ap it shuts down. I have updated software, reset, done a sync, rebooted to no avail any ideas

My Xfinity App does the same thing. Hope they are coming out with a app update.

Some Matrox Effects giving problem

Similar Messages

Maybe you are looking for