Some Media Card folders within 'documents' folder not visible in Windows XP Pro SP3

I have tried renaming these folders on the device (eliminating '.'s and generally shortening the folder names) and then connecting to a Windows machine again afterwards, however, I have two problematic folders (within the 'documents' folder) that are still not visible in Windows.
One thing that is kind of troubling is that I thought I noticed that when I was moving files out of the 'documents' root directory (only place I can put files from the Windows machine [while connected] because I can't see the target folders in Windows) on the device to one of the problematic folders (again, because I cannot accomplish this in Windows), the original full-length folder name was still being referenced in the path displayed in the intermediate confirmation dialog.
Does it matter whether the folders are created within the (connected to) Windows environment or done on the device? Are there folder name length considerations or illegal characters?
I have created (in the Windows environment, while connected) some rather long folder names (including ''' & '.' characters) within the 'pictures' directory and have no trouble seeing them later in Windows.
What could be going on here?
Thanks, FFF

... bump ...

Similar Messages

Documents are not visible with layoutset AppBulletinBoardExplorer

Hi experts,
I created a km navigation iview with layoutset AppBulletinBoardExplorer. I created a new networklocation on my PC to the portal repository and upload a lot of documents (becasue a multiple upload from the portal is not possible). The documents are not visible in the iview. When Is change the layout set to ConsumerExplorer the documents are visible. A reboot did not help. If the documents are saved from the portal again, they are visible. Another layoutset or to upload file by file is also not an option.
How to solve this problem? .
gr
Joeri

Hi Simon,
thanks for your reply!
1. Have you tried mass upload via explorer into one KM folder then move the documents you uploaded into another area using the standard UI?
I have moved the content via KM content option, but problem still exist.
2. Have you checked the trace files on the portal to see if there is some error being logged that is not showing in the UI, but might give you a clue as to what is going on?
In the log there is a warning: user | ACCESS.ERROR"| /KM path | node_create_child. Everyone has read permissions.
3. Have you raised an support message with SAP?
not yet
4. Have you tried using the Portal Drive rather then just windows explorer? (probably won't make a different as I think it uses webdav anyway)
With the portal drive the same issue :-(.
It's something with the layoutset in combination with upload via webdav or explore. The documents are also available with a search
gr
Joeri

Follow-on documents are not visible in MIRO in TEST server, awsys = PRD300.

Dear Experts ,
The Test Server was refreshed around mid-June 2011 with data of
Production Server. The follow-on documents are not visible for the
invoice documents in MIRO in TEST server due to value in tables
BKPF,RBKP : field : AWSYS = PRD300 .
The newly created Purchase Orders after the refresh, the accounting
documents can be seen for the Goods Receipt (MIGO_GR-display) and
Invoice documents (MIRO).
we had already raised this issue in March & got the feedback from SAP
as shown below.
accordingly we have developed & run the program "zzlogsys2" which
updates the Logsys/Awsys field from PRD300 ( of production server ) to
that of the current server i.e. TST300 as required.
after which the FI documents for the material documents are visible in
MIGO,but follow-on documents are not visible for the invoice documents
in MIRO.
we have Checked notes 781498 and 28958 to see if the logical system is
correctly assigned , where we found that in table RBKP after entering document number, Fiscal Year , the
Field AWSYS is "PRD300" & not "TST300" as it should be. We will take up the activity of updating table RBKP
also as we are currently doing for tables MKPF & BKPF.
But to have clear picture as to what we are doing is correct , pl
advise about the following :
1) Is it a correct process done by our SAP-Basis team , that every time
any Server ( e.g. Test or Quality ) is refreshed with Production server
data, the Field AWSYS in various transaction tables gets value as
"PRD300" which then is required to replaced by running program such as
ZZlogsys.
REPORT ZZLOGSYS.
TABLES: T000, MKPF.
DATA: NEW_SYS LIKE MKPF-AWSYS.
PARAMETER: OLD_SYS LIKE MKPF-AWSYS.
SELECT SINGLE * FROM T000 WHERE MANDT EQ SY-MANDT.
NEW_SYS = T000-LOGSYS.
CHECK NOT NEW_SYS IS INITIAL.
UPDATE MKPF SET AWSYS = NEW_SYS
WHERE AWSYS = OLD_SYS.
WRITE:/ 'Number of updates: ', SY-DBCNT.
2) if the above process is correct & normal , then which are the other
tables in a particular server ,apart from tables MKPF,BKPF,RBKP , which
needs to be updated the value of field "AWSYS" in the same way
replacing value "PRD300".
3) if the process in point no. 1 is not correct , then what is the
correct process that the Basis team can do while refreshing any target
server with production data so that target server retains its value in
Field AWSYS & not showing "PRD300".
With 3 servers TEST,DEV & Quality , recently refreshed with production
server to bring all servers in Sync for a HR patch application, we have
this situation now in all 3 servers .
Thanks in advance ,
Anil Shanbhag

It is appropriate to move this thread from ERP-MM to [Enterprise Resource Planning (ERP)|Enterprise Resource Planning (SAP ERP);
Edited by: Jeyakanthan A on Jul 7, 2011 4:56 PM

For some inexplicable reason, Safari 5.1 will not open in Windows 7. It appears in task manager briefly and then disappears. No windows open; I have tried everything. Any ideas??

For some inexplicable reason, Safari 5.1 will not open in Windows 7. It appears in task manager briefly and then disappears. No windows open; I have tried everything. Any ideas??

I fixed the issue. It was related to the DEP settings on my windows machine.

Video download from SD card 2 iPad 2 interrupted, file corrupted. Cannot find file to delete. Does not appear in Photos, or is not visible using Windows File Manager. Consumed 2.5G of space! Can anyone help

Video download from SD card to iPad 2 interrupted, corrupted. Cannot find file to delete. Does not appear in Photos, or is not visible using Windows File Manager. Consumed 2.5G of space! Can anyone help?

Video download from SD card to iPad 2 interrupted, corrupted. Cannot find file to delete. Does not appear in Photos, or is not visible using Windows File Manager. Consumed 2.5G of space! Can anyone help?

Iphone 4 not recognized by windows xp pro

My new iphone4 is not recognized by windows xp pro. Please help.

See http://support.apple.com/kb/TS1538.

My iPod Touch 4g not visible in Windows or iTunes

My iPod Touch 4th generation is not visible in Windows or iTunes. It also doesn't seem to want to charge. I've tried the Troubleshooting Assistant but nothing happened. Any ideas? It was working fine last night, and this morning started acting wonky.

http://support.apple.com/kb/TS1538

IPhone 4S not connecting to Windows XP Pro

My iPhone 4S is not connecting to Windows XP Pro. I've already tried restarting my Apple USB Driver but it still will not connect. Any suggestions?

After plugging it into my computer for roughly the 173rd time in the space of 6 hours it randomly opened itunes installed 3 drivers and started working.
For future reference, what in gods name just happened?

Phone not visible in Windows Explorer - post 10.3 upgrade

I installed 10.3 on my Q10 no problem, saw the Blend icon and decided to install (having used it on the work Passports) so a couple of things....
1. Blend now downloaded - but wants to install on an F:drive - which would be the Q10.
2. When connected via USB (or wifi) the Q10 is not visible in Windows Explorer (it was fine in 10.2)
3. Can see the drivers begin to install, but then it rolls back and a 'Install failed, cannot find F:drive' appears.
4. Is Blend intended for use on the Q10.
Anyone got any ideas I can try?
Solved!
Go to Solution.

Found it, you have to go into Settings > Networks and Connections > Connection Services > USB and slide the USB Mass Storage Mode to the on position. It will then show as an ext. hdd in Windows Explorer.

Mavericks disk not visible from Windows 7 Bootcamp

Mavericks disk is not visible under Windows 7 Bootcamp. Every other drive in the machine and everything else on the network shows up. Any ideas?

CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 760EBA5D-A4B0-49CD-B1BA-087764922062
    =========================================================
    Name:         Untitled
    Status:       Online
    Size:         2999733223424 B (3.0 TB)
    Free Space:   0 B (0 B)
    |
    +-< Physical Volume 5A04D434-DEAC-4D83-ACDB-0EE9BFE6E686
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk2s2
    |   Status:   Online
    |   Size:     2999733223424 B (3.0 TB)
    |
    +-> Logical Volume Family 762D431D-888C-489A-854C-F2151D121F99
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume 96DD2E04-244F-4559-9C89-2DAE309B4994
            Disk:                  disk4
            Status:                Online
            Size (Total):          2999414448128 B (3.0 TB)
            Conversion Progress:   -none-
            Revertible:            No
            LV Name:               Thurgood
            Volume Name:           Thurgood
            Content Hint:          Apple_HFS

Airport Express not visible to Windows XP laptops - works with MacBook Air

Frustration. I've been searching these Discussion boards and none of the proposed solutions seem to work for my problem.
I am trying to set up a brand new Airport Express to stream iTunes wirelessly to my home entertainment system. The majority of my music resides on a Dell laptop running Windows XP Pro(SP3). I have a home WPA2-PSK WiFi network using the modem provided my local internet provider (Qwest). I've been trying to set up the AEX as a client on my existing network. I have turned off my laptop's firewall and virus protection.
I used the Airport Utility to configure the AEX (setting the AEX name to something without spaces, setting a password, choosing join an existing network, selecting the correct network type (WPA/WPA2 Personal), entering my network's password, and enabling AirTunes). This seems to go well. After the restart, the orange light turns to a solid green light, but I get the familiar "Airport Utility was unable to find your Airport wireless device after restarting." I can get the Utility to retrieve the above group of configuration settings by entering the IP address and password via the Configure Other on the File pulldown. Despite the correct settings seemingly being saved to the AEX and the green light, the AEX is not available to my iTunes.
At this point, I'm about 8hrs into this setup process. I have been through all of the recommended permutations of AEX hard reset (paperclip in the AEX reset button while plugging it back in and waiting for the rapidly flashing orange light), laptop reboot, linking my laptop to AEX via ethernet cable for setup, hook AEX to wireless modem via ethernet cable for setup, hook AEX and wireless modem to laptop via ethernet cable for setup, etc. Each time, the AEX settles out to green, but it is not seen by Airport Utility on the Windows XP laptop. I've now tried with a second Dell Windows XP laptop (also shut off the firewall and virus protection) with precisely the same results.
Today I brought home my office MacBook Air. I reset the AEX and re-installed it as a client on my network and it was immediately recognized by the MacBook Air, and went on to stream iTunes wirelessly to my entertainment system (proof of concept). When I switch back to the Windows XP laptops, the AEX still cannot be found by the non-Mac laptops. They can find the AEX temporarily when I enter the IP address to the configure other, but cannot find the AEX after the reboot. The AEX is only available to the XP machines when the AEX is hardwired to either of the laptops via an ethernet cable.
I still just want to be able to stream iTunes wirelessly from my primary Windows XP Dell laptop to my entertainment system. Please help. Thank you.

WPA2-PSK (AES) = Apple WPA2 Personal
WPA-PSK (TKIP) = Apple WPA/WPA2 Personal
See if you can change the setting on your wireless router to read WPA-PSK (TKIP).

To set permisson for folders within a folder in KM Public documents

I have lot of folders created in Public documents section and permission to add more folders are given only to few users.
I want all the users to upload or download documents within these main folders.
ISSUE:
I do want want all the users to create sub folders within the main folders.I want them only to add/download documents so that there will not be any unstructured mess of folders.
I'm unable to set permission as described above.When i give "Read/Write" permission for all users within the main folders then user will be allowed to create sub-folders which i want to avoid.
Is there any method i can solve the above issue.
Thanks and Regards,
Pradeep

Hi Pradeep:
There is also a work around solution for this problem (which is not a direct way).
For this you need to create TWO iViews to the folder path:
1. Navigation iView: you might've already create this iView. Now make Everyone or your UserGroup as 'Read' only in Details > Setting > Permissions. Remove Read/Write to them.
2. Upload iView: Now create an 'Upload iView' to the same path (same as Navigation View). This way users can only upload content (files) in to the said folders and can't create the Folders.
Hope this helps and solves your issue.
Tnx,
MS
points to useful answers

How to alphabetically sort albums and folders within a folder

Much to my dismay, I discovered that iPhoto will not alphabetically sort folders or albums that are within a folder. It will only sort folders and albums (in separate groups) that are at the "root" level beneath the ALBUMS label. I used "iPhoto Folder Import 1.0" to import multiple clip art and stock photo files which resulted in many nested folders and albums that did not stay in alphabetical order (because iPhoto often randomize them when you add them to an existing folder).
Here's how to get around the problem.
Albums: 1. Select all the albums in a folder. 2. Drag the albums to the ALBUMS label so they end up on the root level. 3. Right click on any of the selected albums and choose "Sort Albums." 4. Drag the still selected albums back into their original folder. They should retain their alphabetical order.
Folders: 1. Close all the folders that you want to alphabetize. 2. Follow steps 1-4 above with "folders" in place "albums."
I cannot understand why sorting won't work within folders. I also do not understand why we don't have the option to alphabetically interleave folders and albums. The only way to achieve this is to create folders for just one album, which seems silly.

crossrulz wrote:
CSmith8 wrote:
Thank you for a quick response.
How do you suggest i resolve the issue of different data types in order to use this function? I have tried a few different ways and have whenever I adjust, it wont run through my sub VI's correctly due to being different data types.
You have to READ THE FILES. Jeff just showed you how to use a FOR loop to go through the files. You still need to open the files, read them and then process the data.
I had assumed from CSmith8's original post that the text file processing vi worked. just drop that vi into the for loop and wire the file name in!
Alternately, attach the code that processes the file and a sample file. I bet we can show you a thing or two about how to do it cleaner and faster then point you to the right learning resources so one day you can show us some new tricks.
-Old Dog Jeff·Þ·B
(Why does everyone forget the commas? alt+0183 alt+0222 alt+0183)

Some OSX folders under bootcamp (Win7) not visible - why?

Hello,
a few months ago I set up Win7 via Bootcamp on my MBP 13.3" (mid '09) and I noticed that sometimes (when in Win7) I was searching really long for a specific folder (just a folder with some music in it, nothing special). I gave up and thought I might have accidently deleted it. But when back in OSX I directly found the folder, so he was there. The name folder is named "Ambient/Chillout". But interestingly the problems also exists vice versa. Some Word documents (written under Win7) are not visible for me when in OSX. They are not even visible when I copy the document to an external device (flash usb drive).
Does anyone have an idea what is going here?!
Thanks so far.

Well, somewhere there is/was a question? I guess.
Without the driver from MediaFour or Paragon you can only see some folders, and not be able to see or mount folders, drives and partitions outside the limits of the AppleHFS and home folder or share folder.
So if you want to use an external drive, you can't.
With a driver you don't need to copy back and forth - word and itunes need write access to open those items.
I don't like Spotlight reindexing Windows partition over and over or leaving hidden ".DS and ._DS" files in every folder so I place them in Privacy tab.

Can't get any sound I deleted the folders within the folder "Music"

I just got this shuffle I have everything but the softwhere. It had a few songs on it too I erased the songs by opening the music folder and dragging three folders within to the trash. Then I loaded the music folder with a bunch of songs. It would not play. I tried putting them back in folders named 01 02 03 04 still nothing. I downloaded the IpodUpdater but I can't use it.
Do I need to rename these folders as they were before? If so what were the names?
Do I need to get the softwhere? As I said I've downloaded the updater which does nothing.
THis thing worked fine untill I did this.

So as I said before I dragged a bunch of songs onto the ipod. So now those songs are useing up 75% of my space I can't access them I can't get back to folder to take them off. Once I get this fixed though I think it's smooth sailing. I know folder it's in but It won't let me get there.
How do I just wipe this thing clean.
I have the newest Itunes and I still can't figure out what the IpodUpdater does. am I still missing a peice of the puzzle.
Thanks by the way for your help

Some Media Card folders within 'documents​' folder not visible in Windows XP Pro SP3

Similar Messages

Maybe you are looking for

Some Media Card folders within 'documents' folder not visible in Windows XP Pro SP3