Some more problem with WRT160N
Sorry to be such a schnorrer but I finally got access to my wireless internet and it was all fine and dandy until it slowed down, then stopped completely. I reset router and re-installed everything 3 times but I get the same result... slow access, then to nothing. It's infuriating, this router is becoming the bane on my existence. Help needed, please. What am I doing wrong? The signal appears to be strong and I get same problem no matter how close I am to router.
Solved!
Go to Solution.
On your wireless computer upgrade the drivers for your adapter and check the device manager to make sure it is installed correctly when complete. Also in the router disable UPnP.
Message Edited by sabretooth on 12-27-2009 06:41 PM
Similar Messages
-
I installed lv 6.1 on a windows 98 system. As I am having problems of stability (frequent crashes, much more than with the former release 6.0), I would like to know if there is some specific problem with windows 98 or there is some patch available.
My experience with Win98 is that it is not a very stable system, regardless of software used. For example, Win2000 and XP are far more stable than 98. I've had it crash on its own if I leave the computer on for several days.
I wouldn't recommend running programs for long time (few days) on this OS.
This being said, can you be more specific in your question. What kind of stability problems did you have, which VIs did you run (if possible post them here), did you change the interrupts and priority levels on those VI, do you get error messages or blue screen....
Zvezdana S. -
Some serious problems with Mountain Lion
Hi everyone,
I upgraded my mid 2010 15" MBP to Mountain Lion 2 days ago, and I have some serious problems with my machine now.
- Wifi problem: like many members 's machines, mine has problem to connect to the wifi after sleep or restarting, I had to wait 10 to 15 minutes for it to connected to my home network. Anh I tried to remove all of my settings in System Preferences/Network and added new connection. And now it cant connect to wifi anymore. I'm writing this article while sitting on the floor with my Ethernet cable plugged in my MBP. I connected to internet through a DSL modem and a Airport Extreme as a bridge and Access Point. I also tried to set up all of my network device but my MBP can't connect to the wifi still.
- Keyboard problem with Pages: I was very happy with the new iCloud syncing for Pages documents but after 5 minutes, I met a big problem with Mountain Lion. Whenever I type in Pages with Vietnames Keyboard( Mac OS X built in or from another developer: http://www.trankynam.com/gotv/ ), Pages stops working immediately. I can still drag the Pages's window around but can't type or do any editing. After that I have to force quit pages. It is really stupid that I'm writing a book in Pages and now I have to stop my working till apple fixes this ridiculous bug. I tried German Keyboard as well and Pages worked flawlessly. Do you hate Vietnamese, Apple?
- Messages problem: Since upgrading to Mountain Lion I couln't send or receive any messages. It worked perfectly in Messages beta.
Does anyone have the same problems like me? Any solution such as how to reinstall Messages(I googled but found nothing)
Apple, please test your software more before release it. I feel like I have no computer at the moment because I can't work, can't surfing the web wirelessly and can't communicate with my friends.HI,
- Messages problem: Since upgrading to Mountain Lion I couldn't send or receive any messages. It worked perfectly in Messages beta.
Does anyone have the same problems like me? Any solution such as how to reinstall Messages(I googled but found nothing)
What Messages to what type of Buddies or Contacts ?
This
I found out that the problem with my wifi was my MBP received automatically a ridiculous IP such as 169.254.170.0 instead of 192.168.1.4 as it should be.
WIll be part of the Issue as will be DNS issues.
mDNSresponder crashed with Handsoff! v1.5.3. After upgrading Handsoff! to v2.0.2, it works again.
In this case mDNSresponder also being stopped will stop DNS working.
I would guess if you have resolved these that you can Chat to people again.
4:33 PM Friday; July 27, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look normal when I first open them in photoshop. I will edit, save, and then realize once i've sent it to myself to test the color is WAY off. This only happens in photoshop. I've read some forums and have tried different things, but it seems to be making it worse. PLEASE HELP! Even viewing the saved image on the mac's pic viewer is way off once i've edited in photoshop. I am having to adjust all my colors by emailing myself to test. Its just getting ridiculous.
Check the color space in camera raw, the options are in the link at the bottom of the dialog box. Then when saving make sure you save it to the srgb color space when sending to others. Not all programs understand color space and or will default to srgb. That won't necessarily mean it will be accurate, but it will put it in the ballpark. Using save for web will use the srgb color space.
-
I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies. After starting it in recovery mode, it will not allow me to download OS X Mavericks- it says the disk is locked. Any ideas? I do not have a back-up and do not want to erase everything before I have explored my options. Help?
try forcing internet recover, hold 3 keys - command, option, r - you should see a spinning globe
most people will tell you to do both pram and smc resets (google) and if you still have issues, either clean install (easy) or troubleshoot (hard) -
Some strange problem with Flash/As3
Hi,
I am having some strange problem with my flash cs3.
Whatever script I write in as3 doesn't work, even a stop() function doesn't work . But when I change my publish setting to as2 it works fine.
Not sure about the root cause, may be some setting or preference or my cs3 is corrupted.
Can anybody please advise.
Thanks,
Kishortry this
create a new fla as3,
select frame 1
open the actions panel
paste in the following code
var squares:Array = new Array;
setup();
function setup():void {
for (var i = 0; i < 25; i++) {
var square:Sprite = new Sprite();
//square.name = "square" + i;
square.graphics.beginFill(Math.random() * 0xffffff);
squares.push(square);
squares[i].graphics.drawRect(0, 0, 100, 100);
squares[i].x = i*3;
squares[i].y = i*3;
squares[i].filters = [];
square.graphics.endFill();
stage.addChild(squares[i]);
for (var j = 0; j < squares.length; j++) {
squares[j].addEventListener(MouseEvent.MOUSE_DOWN, dragMovie);
squares[j].addEventListener(MouseEvent.MOUSE_UP, dropMovie);
squares[j].buttonMode = true;
function dragMovie(event:MouseEvent):void {
event.target.startDrag();
function dropMovie(event:MouseEvent):void {
event.target.stopDrag(); -
I have a user who's Active Directory password is going to expire. I had her reset her password by going to apple > system prefs > user > and clicking change password. She received the error "The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help."
I had her change her password via the kpasswd command in terminal and that changed her password on the server sucessfully however the laptop has FileVault on it. Filevault is not recognizing the new password just the old password.
I have deleted the keychain which didn't resolve and now I am going to decrypt and reencrypt the drive. I'm hoping this is an isolated issue I have over 25 laptops configured like this.I "think" the trick was unbinding and rebinding the computer account.
After unencrypting and trying to reencrypt Filevault would still not take the new password.
Rebooted the prompt to update the keychain appeared. Updated the keychain. Filevault would still not take the new password.
Unbinded and rebinded the computer account. It worked and let me add the user to filevault. -
Some small problems with my new 3G iPhone
Having some small problems with my new iPhone, nothing major, just annoying.
1. When I plug my iPhone in to charge/sync my Adobe photoshop keeps trying to download the photos on my iPhone, which causes an error message from Adobe that it can't download and it stops all syncing and removes my iPhone from iTunes. I have to unplug and reinsert USB cable and sometimes it works ok and sometimes I have to reinsert again. Also when charging, it will disconnect, reconnect and the samething all over again, photoshop trying to get photos and an error message.
2. Can't send e-mails via 3G? Only can get, have to connected to a WiFi to send e-mails, or is this normal?When your iPhone includes photos in the Camera Roll, it is also detected as a digital camera when connected to your computer, and whichever app you have selected to import photos will automatically launch to import the photos. If you haven't imported these photos, it is a good idea to do so as with any other digital camera. I import the photos followed by deleting the photos from the iPhone after the import process is complete. If I want any of the imported photos available on my iPhone for viewing, I add the photos to an existing album that is selected to be transferred to my iPhone under the Photos tab for my iPhone sync preferences, or add the photos to a new album followed by selecting the album under the Photos tab followed by a sync.
If your iPhone's Camera Roll does not include any photos that have not been imported, Adobe Photoshop should not launch automatically when your iPhone is connected.
I know how to disable the selected application for photo import from launching automatically regardless with a Mac, but not with Windows.
Regarding the sending email problem, who is the email account provider and does the email account provider have an authenticated SMTP server?
Most ISPs block the use of SMTP servers that are outside of their network or not provided by the ISP being used for your internet connection unless the SMTP server is authenticated. When connected to the internet via AT&T's cellular network, it is no different in this regard. AT&T's SMTP server is included and available by default for use with an email account that does not have an authenticated SMTP server when connected to the internet via AT&T's cellular network, but you probably won't be able to use this SMTP server for sending messages with the account when connected to the internet with your ISP via an available wi-fi network - especially if the email account is provided by your ISP.
I access two email accounts with the iPhone's mail client and both accounts have an authenticated SMTP server. I've never had any problems sending with either account regardless the ISP being used for an available wi-fi network, or when connected via AT&T's cellular network. -
Does Lion support MS Office for Mac 2011? The RoaringApps compatibility list shows Office 2011 having some unspecified problems with Lion. Any confirmation yest showing compatibility with Office 2011?
I'm running MS Office 2011 on Lion and it runs just fine. No "Full Screen", but it runs just fine. There may have been an update to install (I know there was an iWork one anyway), but even before I installed any updates Office '11 worked just fine.
-
I, like many other people it seems, have been having problems with my iTunes ever since I downloaded the latest upgrade for it.
I downloaded iTunes 7.0 on September 16th late at night. After downloading the upgrade I turned my laptop off and thought nothing of it. As I shut down my laptop however, I noticed that I recieved an error message. Ignoring it for the moment, I let my laptop shut off.
When I turned my laptop on the next morning, I noticed that nothing was working. I recieved 3 more error messages, my iTunes would not open at all, my music would [obviously] not play, and for some reason it ended up turning the "Mute" function on on my laptop sound system. After turning that off iTunes still wouldn't open.
Now, following the advice of someone in this forum, I attempted to downgrade my version of iTunes back to 6.0 [or around there] Now at least my iTunes will open, but nothing will play. When I attempt to play a song the information will show up, but it simply will not play.
I'm beginning to get really frustrated with this entire situation. A simple upgrade to my iTunes should not compromise my ability to listen to my music, and even the ability of my laptop to function properly.
Any help or advice that could be given would be greatly appreciated.
Dell Inspiron 6400 Windows XP
Dell Inspiron 6400 Windows XP
Dell Inspiron 6400 Windows XPi downloaded the update and now my itunes wont even open.
a few questions before proceeding.
are you getting an error message? if so, what does it say? include error message numbers if you're getting any.
or are you getting no error messages whatsoever when you try to launch itunes?
if you're getting no error messages whatsoever, do you just see the wee hourglass for a few seconds, and then nothing? if so, do you also have Norton Internet Security 2005 installed on that PC?
or are you seeing a brief "flash" of the itunes license screen (and then nothing)? if so, do you also see similar behavior when you try to launch your QuickTime? -
Graphics Corruption in Some Apps - Problem with Geforce GT750
Hi
I am recently facing a graphics corruption problem with my 2013 MBPr. Yesterday I noticed that the window that shows the mail in Mail.app suddenly showed just some noise (just some strange colors). I restarted the app and it was gone. Then I installed a game named "Tales from the Borderlands". On the menu of the game I noticed the corruption again. Every time I would exit and rerun the game, the distortion would randomly change. Here are some examples:
The problem appeared throughout the game too.
Then I forced "Integrated Only" using a gfxCardStatus to use Intel Iris Pro instead of Geforce GT750. I started the game and the problem was gone. I tried some more times again by switching GPUs and every time I noticed that the problem is with Geforce GT750 and Intel Iris Pro has no problem.
Any ideas what is causing the problem and what should I do? Thanks in advance for any help.Hi Tormirez,
I can't believe my eyes.. I actually was afraid this might happen.
Since I've been following the 2011 MBP forum after i had my MBP repaired (reflow by someone near Antwerp, Belgium), I've been learning some specific things about the very likely nature of these GPU issues.
All these issues seem to be related to the replacement of leaded solder by nearly pure tin solder + not soldering according to the best profile (temperature vs time).
The factor of time saving = money saving may very well play a role here.
When you consider the nature of that leaded solder problem versus the soldering profiles, it's not hard to imagine that the problem isn't just in the 2011 model range, but may actually have started FROM that range...! I've already heard that some 2012 models also failed in a similar way.
It may all be quite logical; tin solder needs a roughly 60ºC higher temperature to get into full liquid state then leaded solder.
As the cheapest way to produce boards is probably rolling entire boards through ovens, melting the parts on it, it would require very precise monitoring of temperatures UNDER the CPU and GPU, to be SURE you have a full flow going on.
But, at the same time, as you're cooking ALL components around 240ºC, they may have chosen not to stay at this temperature long enough. Or, maybe they stop at 240ºC, while 242ºC might be the minimum required temperature to guarantee full flow.
Etc.. It's a very complicated mix of factors that determines if small or large batches of board could contain errors at all or not.
But it may at least be called "bizarre" that these solder errors are found in tens of thousands 2011 MBPs, but also in 2012 models, and in the PS4 and also other brand Windows PCs!!
If you want to test your GPU hard, download GpuTest OSX x64 0.7.0 from ( geeks3d . com / gputest ) and run the FurMark based stress test on HD resolution for 30-60 mins straight, then turn your machine off completely for 15-30 mins (until it's really cold, put it down on some cold stone floor might help), then repeat several times.
If the same problem would be hidden in there as in the 2011 models, this is the way to get it triggered soon.
If you ask me, this might be the first report of the same problem in the 2013 series.....
Question; do you game a lot? If you answer yes, then it would pretty much make a connection to this similar problem I think!
I'm curious about the results of the stress test! -
Some scanning problems with Trend (iMSS) and iMS
Hi everyone!!!
I have been reading and learning a little, but at the moment I have a problem with Trend InterScan Messaging Security Suite and Mesaging Server.
I have follow the recommendations of example 2 in
http://docs.sun.com/source/819-0105/channel.html#wp100754
but I have some scaning problems.
My files are like................
[SERVICE=SMTP_SCANNING]
!INTERFACE_ADDRESS=127.0.0.1
PORT=10025
IMAGE=IMTA_BIN:tcp_smtp_server
LOGFILE=IMTA_LOG:tcp_smtp_server.log
STACKSIZE=2048000
PARAMETER=CHANNEL=tcp_scanner
! ims-ms
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_
POOL fileinto $U+$S@$D aliasdetourhost tcp_scanner-daemon
ims-ms-daemon
! tcp_local
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL maytlsse
rver maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0 aliasdetourhost tcp_scanner-daemon
tcp-daemon
! tcp_intranet
tcp_intranet smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SMTP_POOL maytlsserver allowswitchchannel s
aslswitchchannel tcp_auth missingrecipientpolicy 4 aliasdetourhost tcp_scanner-daemon
tcp_intranet-daemon
! tcp_auth
tcp_auth smtp mx single_sys mustsaslserver missingrecipientpolicy 4 aliasdetourhost tcp_scanner-daemon
tcp_auth-daemon
! tcp_scanner
tcp_scanner smtp nomx single_sys identnonenumeric subdirs 20 maxjobs 7 pool SCAN_POOL daemon 172.17.24.34 port 10024 enqu
eue_removeroute
tcp_scanner-daemon
bash-2.05# more mappings
! MTA mappings file
! for access control and other table lookups
PORT_ACCESS
*|*|*|*|* $C$|INTERNAL_IP;$3|$Y$E
* $YEXTERNAL
INTERNAL_IP
$(172.17.24.34/24) $Y
127.0.0.1 $Y
! 172.17.17.41 $Y
! 172.17.16.51 $Y
* $N
ORIG_SEND_ACCESS
tcp_local|*|tcp_local|* $N$D30|Relaying$ not$ allowed
tcp_*|*|native|* $N
tcp_*|*|hold|* $N
tcp_*|*|pipe|* $N
tcp_*|*|ims-ms|* $N
! Block "external" submissions of explicitly source-routed "internal" addresses
tcp_local|*|tcp_intranet|@*:*.* $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|*$%*@* $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|*.*!*@* $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|"*@*"@* $N$D30|Explicit$ routing$ not$ allowed
SEND_ACCESS
tcp_*|*|*|*@[127.*] $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@localhost.* $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.com $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.net $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.org $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.test $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.example $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.invalid $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.localhost $X5.1.2|$NBad$ destination$ system
CONVERSIONS
in-chan=tcp_scanner;out-chan=*;CONVERT No
in-chan=tcp_*;out-chan=tcp_local;CONVERT Yes,Channel=tcp_scanner
!IN-CHAN=tcp_scan;OUT-CHAN=*;CONVERT No
!IN-CHAN=tcp_*;OUT-CHAN=*;CONVERT Yes,Channel=tcp_scan
<IMTA_TABLE:mappings.locale
With this configuration, my iMSS only scan mails from internal to internal domain.
Mails sent via outlook:
10-Oct-2005 17:11:34.13 tcp_auth tcp_scanner EA 3 [email protected] rfc822;[email protected] [email protected]
10-Oct-2005 17:11:34.15 tcp_auth tcp_local EA 3 [email protected] rfc822;[email protected] [email protected]
10-Oct-2005 17:11:34.24 tcp_local D 3 [email protected] rfc822;[email protected] [email protected] dns;mail.out.com (mail.out.com xxxxxxxxxxxxx Mon, 10 Oct 2005 17:09:34 +0200 ) smtp;250 2.1.5 [email protected]
10-Oct-2005 17:11:34.53 tcp_scanner ims-ms E 4 [email protected] rfc822;[email protected] user1@ims-ms-daemon
10-Oct-2005 17:11:34.59 tcp_scanner D 3 [email protected] rfc822;[email protected] [email protected] dns;172.17.24.34 (TrendMicro IMSS SMTP proxy) smtp;250 2.1.5 [email protected] OK.
Mails that do not pass throw tcp_scanner channel are not scan by iMSS, but I don`t know why this outgoings mail don�t pass throw tcp_scanner ���???
And mails sent via webmail :
10-Oct-2005 17:28:42.05 tcp_intranet tcp_scanner E 2 [email protected] rfc822;user1@ in.com user1@ in.com
10-Oct-2005 17:28:42.08 tcp_intranet tcp_local E 2 user1@ in.com rfc822;[email protected] [email protected]
10-Oct-2005 17:28:42.75 tcp_scanner ims-ms E 2 user1@ in.com rfc822;user1@ in.com user1@ims-ms-daemon
10-Oct-2005 17:28:42.80 tcp_scanner D 2 user1@ in.com rfc822;user1@ in.com user1@ in.com dns;172.17.24.34 (TrendMicro IMSS SMTP proxy) smtp;250 2.1.5 [email protected] OK.
10-Oct-2005 17:28:42.87 tcp_local D 2 user1@ in.com rfc822;[email protected] [email protected] dns;mail.out.com (mail.out.com xxxxxxxxxxxxx Mon, 10 Oct 2005 17:26:42 +0200 ) smtp;250 2.1.5 [email protected]
10-Oct-2005 17:28:42.96 ims-ms D 2 [email protected] rfc822;[email protected] user1@ims-ms-daemon
Thanks in advance.# ./imsimta test -rewrite -debug=level=4 -filter [email protected]
Initializing mm_.
Initializing mm_ submission.
Checking identifiers.
*** Debug output from initializing MM for submission:
16:21:04.24: mmc_winit('l','[email protected],'[email protected]) called.
16:21:04.24: mmc_determine_url beginning with pattern , xadr , mbox , subaddress
16:21:04.24: Empty URL specified.
16:21:04.24: Queue area size 38574770, temp area size 405486
16:21:04.24: 9643692 blocks of effective free queue space available; setting disk limit accordingly.
16:21:04.24: 202743 blocks of free temporary space available; setting disk limit accordingly.
16:21:04.24: mmc_address_to_tree: Parsing address.
16:21:04.24: Right default: in.com
16:21:04.24: Parsing address with null fixup.
16:21:04.24: mmc_address_to_tree: Returning.
16:21:04.24: Rewriting: Mbox = "postmaster", host = "projes.in.com", domain = "$*", literal = "", tag = ""
16:21:04.24: Rewrite: "$*", position 0, hash table -
16:21:04.24: Found: "$A$E$F$U%[email protected]"
16:21:04.24: Rewrite failed, not forward.
16:21:04.24: Rewrite: "$*", position 1, hash table -
16:21:04.24: Failed.
16:21:04.24: Rewrite: "$*", position 0, rewrite database -
16:21:04.24: Failed
16:21:04.24: Rewriting: Mbox = "postmaster", host = "projes", domain = "projes.in.com", literal = "", tag = ""
16:21:04.24: Rewrite: "projes.in.com", position 0, hash table -
16:21:04.24: Found: "$U%[email protected]"
16:21:04.24: New mailbox: "postmaster".
16:21:04.24: New host: "projes.in.com".
16:21:04.24: New route: "projes.in.com".
16:21:04.24: New channel system: "projes.in.com".
16:21:04.24: Looking up host "projes.in.com".
16:21:04.24: - found on channel l
16:21:04.24: Routelocal flag set; scanning for % and !
16:21:04.24: Checking reverse URL cache for: [email protected]
16:21:04.24: Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
16:21:04.24: mmc_determine_url beginning with pattern ldap:///$V?$N?sub?$R, xadr [email protected], mbox , subaddres
s
16:21:04.24: Get domain information for: projes.in.com
16:21:04.24: dmap_locate_domain called with domain projes.in.com
16:21:04.24: Performing LDAP search on baseDN dc=in,dc=es scope 2 filter (&(objectclass=sunManagedOrganization)(|(associ
atedDomain=projes.in.com)(sunPreferredDomain=projes.in.com)))
16:21:04.25: Search returned 'Success' (0)
16:21:04.25: 0 entries returned
16:21:04.25: Creating negative cache entry for projes.in.com
16:21:04.25: Get domain failed with status -1
16:21:04.25: Added tentative negative entry to domain match cache.
16:21:04.25: URL generation failed, status = 0
16:21:04.25: Mapped return address: [email protected]
16:21:04.25: from_access mapping check: ||MAIL|l|[email protected]|
16:21:04.25: Mapping -1 applied to ||MAIL|l|[email protected]|
16:21:04.25: No such mapping; performing simple copy.
16:21:04.25: - passed.
16:21:04.25: mmc_address_to_tree: Parsing address.
16:21:04.25: Right default: in.com
16:21:04.25: Parsing address with local fixup.
16:21:04.25: mmc_address_to_tree: Returning.
16:21:04.25: Rewriting: Mbox = "postmaster", host = "projes.in.com", domain = "$*", literal = "", tag = ""
16:21:04.25: Rewrite: "$*", position 0, hash table -
16:21:04.25: Found: "$A$E$F$U%[email protected]"
16:21:04.25: Rewrite failed, not forward.
16:21:04.25: Rewrite: "$*", position 1, hash table -
16:21:04.25: Failed.
16:21:04.25: Rewrite: "$*", position 0, rewrite database -
16:21:04.25: Failed
16:21:04.25: Rewriting: Mbox = "postmaster", host = "projes", domain = "projes.in.com", literal = "", tag = ""
16:21:04.25: Rewrite: "projes.in.com", position 0, hash table -
16:21:04.25: Found: "$U%[email protected]"
16:21:04.25: New mailbox: "postmaster".
16:21:04.25: New host: "projes.in.com".
16:21:04.25: New route: "projes.in.com".
16:21:04.25: New channel system: "projes.in.com".
16:21:04.25: Looking up host "projes.in.com".
16:21:04.25: - found on channel l
16:21:04.25: Routelocal flag set; scanning for % and !
*** Debug output from rewriting a forward header address:
16:21:04.25: mmc_sender_rewrite: Rewriting header line.
16:21:04.25: mmc_address_to_tree: Parsing address.
16:21:04.25: Right default: in.com
16:21:04.25: Parsing address with null fixup.
16:21:04.25: mmc_address_to_tree: Returning.
16:21:04.25: Parse successful.
16:21:04.25: Rewriting: Mbox = "ma", host = "out.com", domain = "$*", literal = "", tag = ""
16:21:04.25: Rewrite: "$*", position 0, hash table -
16:21:04.25: Found: "$A$E$F$U%[email protected]"
16:21:04.25: Rewrite failed, not envelope.
16:21:04.25: Rewrite: "$*", position 1, hash table -
16:21:04.25: Failed.
16:21:04.25: Rewrite: "$*", position 0, rewrite database -
16:21:04.25: Failed
16:21:04.25: Rewriting: Mbox = "ma", host = "out", domain = "out.com", literal = "", tag = ""
16:21:04.25: Rewrite: "out.com", position 0, hash table -
16:21:04.25: Failed.
16:21:04.25: Rewrite: "out.com", position 0, rewrite database -
16:21:04.25: Failed
16:21:04.25: Rewriting: Mbox = "ma", host = "out", domain = ".es", literal = "", tag = ""
16:21:04.25: Rewrite: "*.es", position 0, hash table -
16:21:04.25: Failed
16:21:04.25: Rewrite: ".es", position 0, hash table -
16:21:04.25: Found: "$U%$H$D@TCP-DAEMON"
16:21:04.25: New mailbox: "ma".
16:21:04.25: New host: "out.com".
16:21:04.25: New route: "TCP-DAEMON".
16:21:04.25: New channel system: "TCP-DAEMON".
16:21:04.25: Looking up host "TCP-DAEMON".
16:21:04.25: - Not found
16:21:04.25: Rewrite rules result: [email protected]
16:21:04.25: Checking reverse URL cache for: [email protected]
16:21:04.25: Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
16:21:04.25: mmc_determine_url beginning with pattern ldap:///$V?$N?sub?$R, xadr [email protected], mbox , subaddress
16:21:04.25: Get domain information for: out.com
16:21:04.25: dmap_locate_domain called with domain out.com
16:21:04.25: Performing LDAP search on baseDN dc=in,dc=es scope 2 filter (&(objectclass=sunManagedOrganization)(|(associ
atedDomain=out.com)(sunPreferredDomain=out.com)))
16:21:04.25: Search returned 'Success' (0)
16:21:04.25: 0 entries returned
16:21:04.25: Creating negative cache entry for out.com
16:21:04.25: Get domain failed with status -1
16:21:04.25: Added tentative negative entry to domain match cache.
16:21:04.25: URL generation failed, status = 0
16:21:04.25: mmc_sender_rewrite: Returning.
*** Debug output from rewriting a forward envelope address:
16:21:04.25: mmc_address_to_tree: Parsing address.
16:21:04.25: Right default: in.com
16:21:04.25: Parsing address with null fixup.
16:21:04.25: mmc_address_to_tree: Returning.
16:21:04.25: Rewriting: Mbox = "ma", host = "out.com", domain = "$*", literal = "", tag = ""
16:21:04.25: Rewrite: "$*", position 0, hash table -
16:21:04.25: Found: "$A$E$F$U%[email protected]"
16:21:04.25: Match, pattern = "out.com", current = "(*domaincheck*)"
16:21:04.25: old state = not checked.
16:21:04.25: Domain check on out.com.
16:21:04.25: dmap_locate_domain called with domain out.com
16:21:04.25: Negative cache entry found
16:21:04.25: new state = fail pending.
16:21:04.25: Rewrite failed due to prechannel mismatch.
16:21:04.25: Rewrite: "$*", position 1, hash table -
16:21:04.25: Failed.
16:21:04.25: Rewrite: "$*", position 0, rewrite database -
16:21:04.25: Failed
16:21:04.25: Rewriting: Mbox = "ma", host = "out", domain = "out.com", literal = "", tag = ""
16:21:04.25: Rewrite: "out.com", position 0, hash table -
16:21:04.25: Failed.
16:21:04.25: Rewrite: "out.com", position 0, rewrite database -
16:21:04.25: Failed
16:21:04.25: Rewriting: Mbox = "ma", host = "out", domain = ".es", literal = "", tag = ""
16:21:04.25: Rewrite: "*.es", position 0, hash table -
16:21:04.25: Failed
16:21:04.25: Rewrite: ".es", position 0, hash table -
16:21:04.25: Found: "$U%$H$D@TCP-DAEMON"
16:21:04.25: New mailbox: "ma".
16:21:04.25: New host: "out.com".
16:21:04.25: New route: "TCP-DAEMON".
16:21:04.25: New channel system: "TCP-DAEMON".
16:21:04.25: Looking up host "TCP-DAEMON".
16:21:04.25: - Not found
forward channel =
backward channel =
header To: address = [email protected]
header From: address = [email protected]
envelope To: address = (route (TCP-DAEMON,TCP-DAEMON)) (host out.com)
envelope From: address =
name =
mbox = ma
Extracted address action list:
[email protected]
Extracted 733 address action list:
[email protected]
Address list expansion:
*** Debug output from alias expansion:
16:21:04.25: Inner expand, level = 0, mailbox = [email protected]
16:21:04.25: mmc_address_to_tree: Parsing address.
16:21:04.25: Right default: in.com
16:21:04.25: Parsing address with null fixup.
16:21:04.25: mmc_address_to_tree: Returning.
16:21:04.25: Rewriting: Mbox = "ma", host = "out.com", domain = "$*", literal = "", tag = ""
16:21:04.25: Rewrite: "$*", position 0, hash table -
16:21:04.25: Found: "$A$E$F$U%[email protected]"
16:21:04.25: Match, pattern = "out.com", current = "(*domaincheck*)"
16:21:04.25: old state = not checked.
16:21:04.25: Domain check on out.com.
16:21:04.25: dmap_locate_domain called with domain out.com
16:21:04.25: Negative cache entry found
16:21:04.25: new state = fail pending.
16:21:04.25: Rewrite failed due to prechannel mismatch.
16:21:04.25: Rewrite: "$*", position 1, hash table -
16:21:04.25: Failed.
16:21:04.25: Rewrite: "$*", position 0, rewrite database -
16:21:04.25: Failed
16:21:04.25: Rewriting: Mbox = "ma", host = "out", domain = "out.com", literal = "", tag = ""
16:21:04.25: Rewrite: "out.com", position 0, hash table -
16:21:04.25: Failed.
16:21:04.25: Rewrite: "out.com", position 0, rewrite database -
16:21:04.25: Failed
16:21:04.25: Rewriting: Mbox = "ma", host = "out", domain = ".es", literal = "", tag = ""
16:21:04.25: Rewrite: "*.es", position 0, hash table -
16:21:04.25: Failed
16:21:04.25: Rewrite: ".es", position 0, hash table -
16:21:04.25: Found: "$U%$H$D@TCP-DAEMON"
16:21:04.25: New mailbox: "ma".
16:21:04.25: New host: "out.com".
16:21:04.25: New route: "TCP-DAEMON".
16:21:04.25: New channel system: "TCP-DAEMON".
16:21:04.25: Looking up host "TCP-DAEMON".
16:21:04.25: - Not found
-13 expansion total.
*** Debug output from submitting an envelope address:
16:21:04.25: mmc_wadr(0x0012b5e8,'[email protected]','[email protected]') called.
16:21:04.25: mmc_address_to_tree: Parsing address.
16:21:04.25: Right default: in.com
16:21:04.25: Parsing address with local fixup.
16:21:04.25: mmc_address_to_tree: Returning.
16:21:04.25: Copy estimate before address addition is 1
16:21:04.25: Parsing address [email protected]
16:21:04.25: mmc_address_to_tree: Parsing address.
16:21:04.25: Right default: in.com
16:21:04.25: Parsing address with local fixup.
16:21:04.25: mmc_address_to_tree: Returning.
16:21:04.25: Rewriting: Mbox = "ma", host = "out.com", domain = "$*", literal = "", tag = ""
16:21:04.25: Rewrite: "$*", position 0, hash table -
16:21:04.25: Found: "$A$E$F$U%[email protected]"
16:21:04.25: Match, pattern = "out.com", current = "(*domaincheck*)"
16:21:04.25: old state = not checked.
16:21:04.25: Domain check on out.com.
16:21:04.25: dmap_locate_domain called with domain out.com
16:21:04.25: Negative cache entry found
16:21:04.25: new state = fail pending.
16:21:04.25: Rewrite failed due to prechannel mismatch.
16:21:04.25: Rewrite: "$*", position 1, hash table -
16:21:04.25: Failed.
16:21:04.25: Rewrite: "$*", position 0, rewrite database -
16:21:04.25: Failed
16:21:04.25: Rewriting: Mbox = "ma", host = "out", domain = "out.com", literal = "", tag = ""
16:21:04.25: Rewrite: "out.com", position 0, hash table -
16:21:04.25: Failed.
16:21:04.25: Rewrite: "out.com", position 0, rewrite database -
16:21:04.25: Failed
16:21:04.25: Rewriting: Mbox = "ma", host = "out", domain = ".es", literal = "", tag = ""
16:21:04.25: Rewrite: "*.es", position 0, hash table -
16:21:04.25: Failed
16:21:04.25: Rewrite: ".es", position 0, hash table -
16:21:04.25: Found: "$U%$H$D@TCP-DAEMON"
16:21:04.25: New mailbox: "ma".
16:21:04.25: New host: "out.com".
16:21:04.25: New route: "TCP-DAEMON".
16:21:04.25: New channel system: "TCP-DAEMON".
16:21:04.25: Looking up host "TCP-DAEMON".
16:21:04.25: - Not found
16:21:04.25: Copy estimate after address addition is 1
Submitted address list:
Address list error -- 5.1.2 unknown host or domain: [email protected]
Submitted notifications list: -
More problems with iTunes 9.1.0.79
Hi,
since I have had my iPhone I have upgraded itunes a couple of times and never had any problems until now.
I upgraded to 9.1.0.79 two days ago and am having all sorts of issues.
Now when itunes starts it takes ages.
When my iphone is connected I get a message saying:-
+itunes cannot sync information with the iphone 'iphone' because syncing has been disabled on this computer+
I click the yes button to enable syncing and then receive an error message:-
+itunes was unable to load provider data from sync services reconnect or try again later+
I then click OK and my phone appears in the devices list.
These error messages happen every time I start itunes, so by me clicking the yes button to enable syncing does absolutely nothing.
My iphone will sync fine just that itunes tends to freeze up and is very slow.
I run a diagnostic from the help menu and without my iphone connected it shows a red dot next to 'No iPhone or iPod found', which is correct but when I have my iphone connected this red dot is now orange, what is the difference in colour?
I have turned of all anti-virus and firewall software but itunes is still the same, very unresponsive, so anti-virus/firewall is not the problem.
I followed to the letter:-
http://support.apple.com/kb/HT1925 and totally uninstalled everything and then reinstalled itunes only to find the same problem persisting.
This is definitely a problem with itune 9.1.0.79 and apple should be addressing it pronto.
Here is the data from the diagnostic run and it shows my iphone as not found even though it is connected, showing in devices and I can sync to it, wierd!!
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
To Be Filled By O.E.M. To Be Filled By O.E.M.
iTunes 9.1.0.79
QuickTime 7.6.6
FairPlay 1.7.16
Apple Application Support 1.2.1
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.0.0.102
Apple Mobile Device Driver 1.46.0.0
Bonjour 2.0.0.34 (214.3)
iTunes Serial Number **************
Current user is an administrator.
The current local date and time is 2010-04-12 20:39:07.
iTunes is not running in safe mode.
Video Display Information
ATI Radeon HD 2600 XT AGP
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 9.1.0.79 is currently running.
iTunesHelper 9.1.0.79 is currently running.
Apple Mobile Device service 3.0.0.0 is currently running.
Universal Serial Bus Controllers:
VIA Rev 5 or later USB Universal Host Controller. Device is working properly.
VIA USB Enhanced Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
VIA OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
iPhone 3GS running firmware version 3.1.3
Serial Number: *********
** iPhone/iPod touch Sync Tests **
Sync tests completed successfully.
I have blanked out serial numbers etc..
Regards..,
K :0(notice how under diagnostics readout it shows "most recent device not currently connected"
mine does same thing and i have iphone connected when i do it.
my problems also started with this update and i show 4 errors in event viewer which is under adminastrative tools in control panel.
MY problem is super slow backups for a 16gb 3Gs with 12gbs free. a backup used to be done in like 30-45 seconds now takes about 5 minutes and looks as if it stals at a few points when looking at bar at top of itunes.
my iphone shows up in itunes and shows all pages etc. i do everything manually although i do sync apps.
everytime i connect iphone and open itunes i get 4 errors thats show up only in event viewer (but anyone who maintains computers should be aware of all tools available to them to see whats going on in the background) that show up for "BONJOUR" i have posted this here and under bonjour forum. i turned off bonjour services the proper way again thrru adminastrative tools>services double click bonjour and change for "automatic to "disabled". don't do it through msconfig as some would tell you to do if it's a bonjour issue.
but checking out event viewer can give you valuable info so you don't do the apple nonsense wasting hours to clean up their messy installation only to have it do exact same thing again. it's obvoius they have a conflict.... now we can only hope for a resolution ie UPDATE if enough complain by sending them all this.
i don't have a jailbreak phone nor am i rebuilding anything i'll live with it till they fix it as my event viewer log isn't getting filled up with bonjour errors anymore nor do i need all this bloated crap apple sends our way... i do have quicktime pro. -
One more Problem with SAP query
Hi All,
I am having a problem with SAP query
Execution of SAP query transaction is leading to Dump
the dump says Field 'R01' contains no fields, syntax check on the program shows same error.
When I tried regenerating the Query in SQ01
" Query Specification cannot be use to generate list
Ranked list contains only numeric fields
Please help meGianpiero Bucchieri wrote:
> So its important to listening the following tables too: Faktura (invoice), Partner Role, Partnernumber and the requierements number. The table are EKKO EKPO AND VRKPA OR vbkd, but if I join this table the query doesn't listining any results. If I cancel this 3 or 4 table and I start the query, the listening are ok.
>
I am not sure what business process you are describing here - is it some kind of third-party sales order? If so, your join is wrong.
From VB E P, firled BANFN and BNFPO you can go to table EBAN, where in field EBELN you will find the number of the purchase order (if somebody already had an MRP+Me58 run over the PR) which will lead you to table EKKO, and EKPO.
So what we have here (essentially is):
VBAK -> VBAP -> VBEP -> EBAN -> EKKO -> EKPO
But that only solves one of your problems - you still have a long way to go to get invoices, partner and partner roles into there and I am beginning to ask myself what exactly it is you want to evaluate.
Care to explain?
Edited by: Mylène Dorias on Apr 1, 2010 2:10 PM -
Is there some underlying problem with FlashPlayer 11,5,502,135 & previous versions?
I, like so many here everyday, all seem to be having the same problem with FP just going to a black screen & not loading the video or sites will try to tell you t download the latest version of FP even though Micromedia.com tells you the latest version is installed.
This problem dosent appear to be version specific as it started with an earlier version but like most I now have 11,5,502,135.
I have followed the suggestions given in detail in this link to Member i.RR but to no avail.
http://forums.adobe.com/thread/1114473?tstart=0
It would be of interest to see if Member i.RR has had their issue resolved.
As so many seem to be having the identical problem can Adobe create a heading/ticky for this & move related discussions to it maybe - this may stop us all asking the same question over & over as it would seem this problem is not going to be fixed any time soon.
I am in contact with staff who are being quite helpfull & hope to continue this week in trying to sort this for us all.I, like hunreds of others, havent been able to sort the problem. Whilst I
appreciate each pc setup may be different, this problem appears to be
common across different browsers. It also appears on MS forums.
Some overlook the obvious but most have done the hard yards & followed the
instructions many times over but to no avail.
When a new post arrives saying exactly the same thing its answered like its
a new problem that hasnt been raised before.
The theme linked below seems to be the best to follow, only because my
problem is exactly the same, so I am waiting patiently for Chris Campbell
to come up with a miracle.
So I would urge everyone to keep asking the question.
http://forums.adobe.com/thread/1114473?tstart=0
Maybe you are looking for
-
Why does my iPad Air takes a long time to charge?
Why does my iPad Air takes a long time to charge?
-
IPhone 5 charging port has gold strips sticking up inside it, and now it won't charge
I dropped my phone in the toilet yesterday, and it half submerged into the water (the water reached just beneath the sim card slot). I took it out of the toilet immediately and pressed down the lock button and slid it to power off. I then put it in a
-
Open with.....removing apps from list?
When I right-click and choose 'open with' on a picture for example, I get a huge great list of pre-sets to change the file too. Some of the icons/formats I don't recognise but I think they are a combination of Photoshop, and Flash, Fireworks etc file
-
Genres duplicating on iPod only - not in iTunes!
Hi All, Can anyone tell me why Genres are repeated on my iPod? For example, I only have one 'Blues' in iTunes but my iPod shows four - all with different no. of albums/artists! Thanks Colin
-
My classic OS9 applications will not open
My Classic OS9 applications will not open, and I cannot find the classic OS9 application showing in the preferences window.I tried installing Classic OS9 on a disc I had from another computer but maybe it was the wrong disc