Some NEF files and also JPG's Not showing up in Bridge CS4

I have purged the Cache, restarted my computer..ect... yet the previews DO NOT SHOW UP for some of my images. It is random so I am unsure of what to do to recify this problem
Message was edited by: SueBarrPhotography

Bridge Macintosh

Similar Messages

  • I take a .NEF file and a .JPG file with every click. When I transfer the files using a flash drive to another computer I never get all of the files to transfer. I get some of the .NEF and some of the .JPGs but not all

    I take a .NEF file and a .JPG file with every click. When I transfer the files using a flash drive to another computer I never get all of the files to transfer. I get some of the .NEF and some of the .JPGs but not all. How come?

    If you're exporting a project then you'll only get the images in that project. Also if any of the masters are referenced then you won't get those masters unless you check Consolidate masters into exported library
    It might be best if you started from the beginning and explained what it is your are trying to do and how you're going about doing it. Also a description of you're hardware/software setup would be helpful.

  • I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.

    I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.  I get a message saying that Camera Raw does not support my camera type but it always has in the past.  The bridge no longer shows the picture view of my NEF files.  These are Nikon NEF files from the Nikon 5100 DSLR camera.  How do I fix this?

    I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.  I get a message saying that Camera Raw does not support my camera type but it always has in the past.
    When you re-installed Photoshop, you also re-installed the version of Camera Raw which shipped with Photoshop - in other words you reverted to an older version of Camera Raw which does not support the D5100.
    Camera Raw plug-in | Supported cameras
    The D5100 was first supported in Camera Raw version 6.4.
    In Photoshop, click Help > Updates to update Camera Raw.

  • Some PDF files and other emails do not display the whole page. Is there a way to change that?

    Some PDF files and other emails do not display the whole page. Is there a way to change that?

    If an app does not behave as expected, try closing the app completely and reboot the iPad. It appears as though you have the original iPad. It helps if you list your iPad model and the iOS that you are running.
    Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Adjustments made in LR 2.1 are not Showing up in Bridge CS4

    I thought that I had read somewhere that LR2 and Bridge CS4 were aware of each other and photo settings made using one application would be seen by the other. I can tell you that CS4 is not reading ratings, color labels, and ACR settings made using LR. I guess that I was wrong about any integration between Bridge CS4 and LR2?

    Paul and Greg, thank you for your insightful posts! This makes sense.
    Jeff, I think that you have already shown your true colors, But if you want to make me feel 2 inches tall, go ahead and try. I reserve embarrassment from those people who I hold some respect for. You are not deserving of any respect because you obviously knew what Paul and Greg shared without trying to be sarcastic and yet withheld it just to teach me a lesson about how superior that you think that you are. Then you try to hide behind just being humorous. I don't buy it. If you had told me what Paul did, then made the comment about "reading minds", I would agree that this was innocent humor. But you withheld the useful information and thus your apparent attempt at humor (after the fact) came access as sarcasm, given the lack of help it provided. I can only conclude that you are the one who is flailing about and I have no need for this kind of help.

  • Raw images do not show up in Bridge CS4 for PSE 8 for Mac

    I just downloaded PSE 8 for Mac and my raw files no longer show as thumbnails.  I can open them in Elements, but the image is blank in Bridge.  These same images were fine in CS3 (PSE 6 for Mac).  I have downloaded and installed the new Camera Raw 5.6 plug-in but that didn't work.  Any suggestions?  Thank you!

    You have to update bridge separately from PSE, and bridge ships with a pretty old version of ACR. Just go to Help>Updates in bridge and it will update itself for you.

  • Why can I highlight some pdf files and not others

    Why can I highlight some pdf files and not others

    Highlighting only works on text documents; a scanned document (image) cannot be highlighted.

  • Hi, I have downloaded some avi files and mov files. i am not getting audio while playing the movie. i tried to play with iTunes, QT, DivX player. but I am getting audio in mp4 files. can u help me to fix this

    Hi, I have downloaded some avi files and mov files. i am not getting audio while playing the movie. i tried to play with iTunes, QT, DivX player. but I am getting audio in mp4 files. can u help me to fix this

    First, back up all data and then uninstall "DivX" according to the developer's instructions.
    Then try this:
    VideoLAN - Download official VLC media player for Mac OS X

  • JPG images not displayed correctly in Bridge and Photoshop (Mac OS)

    (Note: I have copied the content of this query from the Creative Suites forum where I originally opened it.)
    I am using CS4 under OSX 10.4.11 on a PowerMac G5 Quad with 23" Apple cinema display. Images which have been captured as JPG are displayed fine by Preview, but when opened in Bridge, Camera Raw or Photoshop. the colours are all "washed out". The attached screen capture should give an idea of the difference, with the upper being Camera Raw (image settings) and the lower being Preview. My monitor has been calibrated and I'm using sRGB IEC61966-2.1 colour space in Camera Raw and Photoshop. The colours displayed by Preview are pretty close to "real life". I find it virtually impossible to adjust the colours in Photoshop to get back to anything similar.
    After opening the image in Photoshop without adjustment, and Save As JPEG with embedded color profile, Preview displays the new image the same as Photoshop. Save As JPEG without embedded color profile, and Preview displays this copy just like the original. It seems that Photoshop is making different (incorrect) assumptions about what color space to use when there is no embedded color profile. Shouldn't it assume sRGB like virtually everything else (http://en.wikipedia.org/wiki/SRGB)? Or is its interpretation of sRGB incorrect? How can I fix this?
    Re: JPG images not displayed correctly in Bridge and Photoshop 

    xxxxyyyyz wrote:
    …If there is someone out there who has experience of obtaining decent colour management in CS4 on a Power PC, I would really like to know how you achieved it.
    That would be yours truly, and I hasten to reply because I may have some insights that can help you too.
    Just get it it out of the way, here's my setup:
    Photoshop 11.0.2 ("CS4"); VersionCue disabled and uninstalled.—2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; 1 FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.
    I can unambiguously and in good faith represent to you that my color management, from capture to print, is as spot-on as anyone with any kind of setup can hope to achieve.  Unequivocally and without qualifications.
    Now, first things first:  Forget about trying to synchronize color management across the point applications lumped together only by Adobe marketing fiat into a variety of meaningless "creative suites".  Concentrate on Photoshop.  Do not try to use Bridge to synchronize anything.
    The "suites" are a totally artificial construct created by Adobe bean counters and marketing types.  The point applications (i.e. the individual programs clumsily bundled together, e.g. Photoshop, Illustrator, InDesign, etc.) are developed independently by separate engineering teams that are not only not in the same building, but in different cities, different states of the American Union, and even in different countries.  They have very little communication among them, if any, as evidenced by repeated posts in these forums by Photoshop engineering staff urging us, the end users, to let the other teams know in their own forums that a given problem exists and is actually affecting our work.
    Enough said about the cause of the problem.  The end result is that Color Management is at very, very different levels of progress and sophistication in each individual point application, with only Photoshop fully entitled to be considered state of the art.
    Secondly, a disclaimer:  I have been hanging on to my CRT monitors and take care of them as Jascha Heifetz used to take care of his Stradivarius.  I don't know what I will do if I manage to outlive the usefulness and accuracy of my CRTs (unlikely at this point).  I have despaired in futile efforts to bring the luminosity of any LCD monitor down to where I would feel comfortable calibrating and profiling it.  I believe my monitors are the foundation of my color management efforts.
    Especially if you have one of the extreme wide-gamut LCD or LED monitors, you'll face an uphill battle. 
    Be careful to avoid any version 4 icc profiles, whether canned or generated by your calibration software.  Stick to version2 icc profiles.  Ask the manufacturer of your calibration software/hardware if in doubt.
    Here are some not-too-recent, but thoroughly representative screen shots of the calibration results I obtain with my monitors, which I calibrate and profile often and regularly (I validate the calibration at least several times per month).
    In a nutshell, my color management practices and settings mirror those described by Bruce Fraser, Jeff Schewe, Andrew Rodney and Gary Ballard's site.  I have learned from all of them.
    My working color space is ProPhoto RGB.  I choose to work with PSD and PSB files.  As a long-time, rabid JPEG hater, I only rarely deal with JPEGs, using them sporadically to illustrate a point in this forum or elsewhere in the web.  My main output consists of prints.
    I only deal with tagged image files (files with an embedded color profile) and often recommend beating up with a baseball bat any moron that hands you an untagged file—figuratively of course, but I find the expression gets my point across unambiguously.
    Following is a screen shot of some of my pertinent settings:
    Note that I have never bought into the "suite" concept myself.  I do have and routinely use Adobe Illustrator 10.x, InDesign 2.x and Acrobat Professional 8.x, but they are all older, independent versions of each point application, licensed at different times.
    Be further advised, that the answer to many problems offered by Adobe engineers often is not to install VersionCue, or uninstall it, or at least disable it.
    Also, as outlined at the beginning of this post, concentrate on Photoshop, not on synchronizing applications that can't really communicate with each other, despite the claims of Adobe marketing hacks to the contrary.
    One big caveat, do not fall into this trap:
    xxxxyyyyz wrote:
    …I believe my problem has nothing to do with my monitor profile, for several reasons, but…
    …It seems extremely unlikely to me that…
    You either want to learn, or you don't.  You either want to solve your problems, or you don't.
    When you start arguing instead of studying, questioning advice instead of following it and detecting where you went wrong, you're on the right track to nowhere.  That attitude will get you there fast.  Remember you are the one with the problem, and only you can acquire the discipline to learn how to solve it.
    Go ahead and ask me anything that is not clear, just don't argue with me please, and don't tell me why you think Fraser, Rodney, Ballard and I are wrong.  You see, I am not experiencing any problem that needs fixing.  I have an interest in helping you, but not in hearing about your speculations, theories or conclusions.
    Good luck.
    Wo Tai Lao Le
    我太老了

  • Some videos are semi-missing - they do not show up in File Manager apps or another app

    I have what I will call three FILER apps: File Browser, Air Browser and File Commander.  I also have MovieSRTPlayer.  Those apps appear to not register the presence of some video files that I have definitely copied to my PB.  The MovieSRTPlayer will overlay a .srt file's text over a video allowing the pb to show subtitles.  It works as long as it can find the video and srt files.
    I am definitely transferring a series of video files to the pb's video folder.  I am also transferring a companion file to that folder.  The companion file is a subtitle file in the form of an .SRT file.
    THREE file manager type apps do NOT show those files as present in the video folder.  The Video app itself does show and play those video files. 
    I have copied the files using both wifi-sharing and when they did not show up that way, I copied them using the usb cable to the pb's Z: drive and the video folder.
    As stated the dam! files play in the video app.  But they do not appear in the various filer apps.  And they also do not show in another app, one that will display the subtitle (.srt file) file overlaying the video.  In all instances it is as if the pb does not register the presence of those files on the pb.
    Now, what is interesting is that when this first cropped up, 7 files were missing - just a mix of video (no .srt files involved).  That is they showed in the video app and played but the filer programs did not show them.  I managed last night and this morning to get 7 of those to finally show by copying/moving/deleting and recopying.  But now I'm running into this brick wall again.  I have repeatedly copied two video (avi files) and their companion .srt files to the video folder.  They are in that folder (I've looked using usb and wifi-sharing) and they play in the PB's video app.  They are most certainly on my pb.
    Oh, and yes, I've rebooted a number of times. 
    Ideas?

    I have what I call 3 file manager apps.  File Browser, Air Browser and File Commander (the older free version). 
    They all show or don't show the same thing.  So files are missing.  And SIZE is not the sole determining factor.  When I was testing MovieSRT and "lost" some files I copied and renamed avi and .srt files.  So there are two extra .srt files in the Video folder.  But while they are 32kb (kilobytes) and 58kb respectively, they do NOT show up in the File managers.  The other two identical files with the names matching the .avi files do show up.  The one very large mp4 (2gb) does not show up.  A subfolder I created just as a test does not show up.  But the large mp4 and subfolder were showing up while I was actively copying the 2gb file - they would show up as the file was being copied - the filemanagers showed the file getting larger and larger and while doing so the "missing" subfolder also kept showing up.  Then once the large file was completely copied, both it and the subfolder "disappeared" - again, the large mp4 does show in the Video app and it plays.
    My persistence probably is based on the fact I was a computer programmer many eons ago!  Also, I was trying to get YOUR app to work and the avi files were not showing up in your listing but they were showing and playing in Video app (but no subtitles).  Finally, after copying/moving/re-copying over and over including moving and copying to the PB's Print folder (just since it was empty) and copying it back to the video folder (now 2 copies), the files would finally show up.  Peculiar - yup!
    Oh, one other thing - the 3 file managers all show what I will call the virtual Playbook-Demo video in their listings - your app does NOT show it.  Obviously, it is not located in the Video Folder but somewhere in the bowels of the PB.  So, the filemanagers  are relying on some "file structure" that is not fully correct.  But your app does not appear to show it.

  • Processor type of the file and the device does not match

    We ve the following problem with Zfh 7 sp1. When trying to distribute a
    application we receive the message failed. When i open the log is see the
    below message.
    The processor type of the file and the device does not match.
    I ve searched on the message and i ve seen that it is a know error and it
    should be fixed in SP1
    10100578 - ERROR: Skipped installation of file on device <DEVICE(Username)
    > GUID <XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX>. The processor type of the
    file and the device does not match.?
    The processortype of the device is StrongARM and also from the
    applications. Also when i put it on ALL/CEF it won't distribute.
    Does some other people also have this problem.

    Mail,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • [BUG] deploytk.dll file and activex control is NOT uninstalled

    deploytk.dll file and activex control is NOT uninstalled, when you uninstall the latest JRE.
    I have uninstalled the latest JRE, but the file deploytk.dll is still present in c:\windows\system32\ and the related activex control deploytk.dll 6.0.190.4 is loaded in IE8. Please fix this bug.
    Windows Vista SP2

    Unfortunately, it was *all* of my ActiveX controls that wouldn't load. That said, A user of the Info-LabVIEW list came up with the answer: reinstall the RunTime engine - wierd....
    thanks,
    Christopher
    Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

  • Hi. I was trying to open some pdf files and got a message my adobe reader was deinstalled. I installed a new version of Adobe Reader for Mac and when trying to open a PDF file I am getting a message in a foreign language. Any suggestions?

    Hi. I was trying to open some pdf files and got a message my adobe reader was deinstalled. I installed a new version of Adobe Reader for Mac and when trying to open a PDF file I am getting a message in a foreign language. Any suggestions?

    Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.

  • Why does reader freeze while opening some pdf files and others open instantaneously?

    I use pdf files created from CamScanner and shared from DropBox.  In DropBox, many times (over 50%) while opening the PDF the process freezes and the error message is Adobe Reader is not responding.  If you close the program, and re-open the file, it opens fine.  I have saved these files to my computer and the same issue occurs.  The files are 100-500kb, so I do not think size is the issue.  I have reinstalled Reader (11.1.10) and there is no improvement.

    This appears to have reduced the time to load a document.  Thanks Jimb      From: Anubha Goel <[email protected]>
    To: jimb70395944 <[email protected]>
    Sent: Friday, March 20, 2015 4:37 AM
    Subject: You have been mentioned by Anubha Goel in Re: why does reader freeze while opening some pdf files and others open instantaneously? in Adobe Community
    |
    You have been mentioned
    by Anubha Goel in Re: why does reader freeze while opening some pdf files and others open instantaneously? in Adobe Community - View Anubha Goel's reference to you  Hey jimb70395944, Please try disabling protected mode under 'Edit> Preferences> Security (Enhanced)' and uncheck 'Enable Enhanced Security' option.Then, try again and let me know.  Regards,Anubha
    Participate in the conversation by replying to this email
    To stop receiving these messages whenever you are mentioned, go to your preferences and disable notifications for direct social actions. |

  • Get the session trace files and also the TKPROF reports for storedprocedure

    Hi ,
    I am trying to find out the bottlenecks on a storedprocedure, which does a insert into a table, where the target table has lot of indexes/constraints, so i want to see, which indexes/constraints is causing the problem. so in order to do I want to get the session trace files and also the TKPROF reports to see the bottlenecks for a oracle stored procedure,
    Could you please give us the list of steps to get the tracefiles and tkprof reports.

    781649 wrote:
    Thanks for input, i am using oracle10g standard edition. i dont think i have these tools available (DBMS_PROFILER or DBMS_HPROF). Did you even bother to try the following?
    SQL> DESC DBMS_PROFILER
    SQL> DESC DBMS_HPROF
    I understand it would be too much to expect you to actually Read The Fine Manual
    I am using bulk collect for all in my storedprocedure to insert the rows into a big table. In order to perform analysis on this bulk collect which tool will help me to identify the bottlenecks .
    I want to compare background session properties for both runs (like inserting the data with indexes/constraints vs without indexes/constraints). please let me know..I am willing to bet you the problem/slowness is on the SELECT side & not the INSERT!
    Just Curious
    Handle:      781649
    Status Level:      Newbie
    Registered:      Jul 12, 2010
    Total Posts:      35
    Total Questions:      17 (14 unresolved)
    Why so many unanswered questions?
    Edited by: sb92075 on Jan 17, 2012 3:13 PM

Maybe you are looking for