Some notes doesn't stop in Logic 8.0.2

Since I updated to 8.0.2, some note played by kontakt 3 doesn't stop... seems it is missing the note off midi event. Any idea what I cant do to correct this please?

Hi,
the only solution I found is to choose the "engine" tab in Kontakt.
Then choose "restart engine"= it will stop those hanging notes, and there
you're good....until the next "hang"
(haven't found a definitive solution, as well on the NI forum)
Hope this helps
Best
Biggnik

Similar Messages

  • I have ipad with IOS 7,  Some apps doesn' t work, safari not open some web site. What can I do?

    I have ipad with IOS 7,  Some apps doesn' t work, safari not open some web site. What can I do?

    Try this and see if it helps.
    Settings>Safari>Clear cookies and data.
    Now close Safari completely. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then "swipe up" or "drag up" on the app preview thumbnail to close it.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • My new i phone 6 plus some time not connecting wifi after switching off it start and after some time gain its stop connection please advice

    my new i phone 6 plus some time not connecting wifi after switching off it start and after some time gain its stop connection please advice

    settings - general - reset - reset network settings.

  • Since itunes 2.0.4 has been downloaded. My ipod doesn't synchronize properly/ at all.The LED screen shows  "copy 1 or 2 from 101" and it will remain like that. It looks like sync but there's nothing to happen. It doesn't stop by it self. How to solve?

    Since itunes 2.0.4 has been downloaded my ipod doesn't synchronize properly/ at all. The LED screen shows çopying 1 or 2 from 101' and itt will remain like that.
    It looks like sync but nothing is happening. The sync doesn't stop by itself. Is there anybody to solve this problem? In previous versions never a problem.

    I have exactly the same issues with my new 80G iPOD. I have found that when connecting to my PC, the iPOD does not start iTUNES 7. This can be resolved by stopping the iPOD Service in Computer Management, connecting the iPOD and then starting it again. Then when you start iTUNES it finds the iPOD. - http://docs.info.apple.com/article.html?artnum=93716
    Seems like a stupid long-winded way to do things, but at least you can get some stuff on to your iPOD.
    As far as using Restore goes - I just get the restoring iPOD message you described, which it blatantly isn't :((
    DELL   Windows XP Pro  

  • Some browser doesn't display the MW page correctly

    after installing Maintenance Wizard 2.17, some browser doesn't display the MW page correctly, some menu function is missing. The display problem is not for everyone, some user's browser have no problem. Some user's IE are displaying it correctly. i.e. one user has both IE and firefox working, however, after she clear her java cache, both browser refuses to display the MW page correctly.
    The resolution of PCs is set to the same value. however, the size of the text isn't. after changing the size of the text, some of our pc start to work. The display web page for MW doesn't show the right most menu item. After resize the screen, we find it is because of the blue frame for the MW page that stop to dynamical stretch up to 20 inches.
    The menu item is been streched out of the blue frame, they are no longer displayable
    any ideas?

    We have the same problem.
    And find it is caused by a combination of your screen resolution, font size and browser window size.
    The blue frame that displays the Oracle Mainentance Wizard banner doesnt dynamical strech to the full window size.
    After experiment with it, MW can display much better in our case.

  • The PSE 10 process doesn't stop after closing the application. Why??

    On Windows 7, the PSE 10 process doesn't stop when closing the  application, therefore the PSE 10 app. will not restart once it is closed. The user must stop the process from task manager or reboot before PSE 10 can be restarted on a Windows 7 machine. The forum suggestion to double-click the exe (instead of the shortcut) as a solution, obviously isn't a solution and can't work. There are no updates to PSE 10 and the only access to any support is through this forum. There have been complaints about this on blogs all over the Internet. Why can't Adobe come up with a fix/update or if they have where is it posted?

    First of all, there is no difference between the files on the disk and those downloaded as the trial. The only difference is that one comes with a serial number and the other does not. You can put your serial number into the trial version and it will then be activated. The only way the disk would behave differently is if there is some physical flaw (scratches, warping, etc). Usually such damage will cause the installation to fail, it's pretty difficult for such damage to modify the files in such a way that they still install but behave differently.
    If you are dropping a file on the shortcut and the Photoshop Elements Editor is opening but the file is not, there could be a few different things going on there. Check your shortcut properties first: does it go to PhotoshopElementsEditor.exe or Photoshop Elements 10.0.exe? If the former, then there are probably some missing support files. If the latter, this is the Welcome Screen, which has likely been configured to launch the Editor automatically. However, you would be sending the file to the Welcome Screen, which doesn't do anything with the file. It is not capable of passing the file off to the Editor, only capable of launching it.
    Also, double-clicking a shortcut is generally the exact same thing as double-clicking the file the shortcut points to, but you can add modifiers to shortcuts to make them behave differently.

  • Movie after playing doesn't stop at the last frame.

    Movie after playing doesn't stop at the last frame but goes back to frame one. Movie stops normaly when played on iMac but makes trouble when placed in the iBooks Author. That's not eve problem of looping (repeat none). Help, this makes me mad.

    laura4life
    You have fragments (leftovers) beyond the end of the Timeline content that you intended.
    I am going from an Elements Windows workspace, so please translate into Mac accordingly.
    Expand your Timeline content to the maximum with the Zoom Out Zoom In slider above the Timeline.
    Press the End key of the computer keyboard. That should take the Timeline Indicator to the fragments which must be deleted.
    Explore all the tracks in that area.
    Repeat the End key press until the Timeline Indicator stops at the end of the intended Timeline and not some 3 hours afterward.
    What you find at "end of track" could be fragments or files that you moved out of the way of the active project and forgot were there.
    The fragments typically present as thin vertical black lines scattered about the tracks.
    Please let us know the outcome.
    Thank you.
    ATR

  • Closing NetStream doesn't stop loading data in Opera

    Hi,
    i'm wondering if any of you experienced this problem before?
    For me Flash Player doesn't stop loading data when issuing
    the close command for a net stream that is progressively
    downloading data, only the video stops. I'm using Windows XP SP2,
    Opera 9.27 and Flash Player 9.0.124.0. It works fine in Firefox,
    Mozilla, Seamonkey, IE and Safari.
    I'm not doing anything special, just the following script
    quote:
    var nc:NetConnection = new NetConnection();
    nc.connect(null);
    var ns:NetStream = new NetStream(nc);
    vid.attachVideo(ns);
    ns.play("path-to-the-video.flv");
    and then closing the stream with "ns.close()".
    Regards
    Frank

    Greeetings,
    It's probably still loading some content, such as Flash-based ads, etc. If you don't like those, disable JavaScript in Preferences>Security or install click2flash. You can also just press the Esc (Escape key) to stop the loading entirely.

  • LOVE LOVE LOVE my iPhone so far, but ringer switch doesn't stop all sounds?

    With exception of a few concerns like somewhat low speakerphone and earpiece volume, no non-pinch zooming in maps, not being able to expand email contacts (to see the actual address), not having any auto-fill in Safari, and some stability issues (a couple Safari crashes on complex sites - to be expected until they collect enough bug data and make a patch)... I love my iPhone! After updating my OS & iTunes, activation took only a few minutes (early evening of the 29th) since I was an existing account holder. I did have a corporate discount on my plan and was worried I would be denied, but it went through just fine - fwew!
    So then, I'm in a movie theatre today during a dramatic, quiet passage, with the ringer switch off (I'm so polite! <bg>), and low and behold, here comes a clever marimba roll. Having not heard this other than in the ringer setup area, I wasn't sure what it was (still not). Hitting the sleep button on top didn't do anything... it bleeped 3 times, almost sending me out of the theatre in embarrassment. I don't have to go into the settings and turn off all the notices do I? The ringer off is supposed to stop ALL sounds, per Apple's site. Anyone experience this or have a solution?
    PM G5-Quad 2.5GHz | eMac G4 1.25GHz | PM G4 800MHz | PB G4 1GHz 17 | PM G4 400MH   Mac OS X (10.4.5)  

    Per the manual, the switch doesn't stop the alarm clock from going off. Which is set to marimba by default.

  • InfoSpoke doesn't stop while extracting

    Hi all,
    I created an infospoke on an InfoCube
    When I run the extraction on a file the database manager takes all CPU and doesn't stop.
    I tried to remove some infobjects and it works.
    I cannot identify a single infobject that makes troubles.
    It seems that if I reach a limit the database doesn't manage the extraction any more
    I'm using BW 350 and in the log of the job I found that program RSBSPOKE2 is run.
    Any help appreciated,
    Piercarlo

    Hi,
    I reduced the size of the package at 10 but no package created. It seems the very first query it executes makes the database busy.
    Did you never face a problem like this?
    Is there a limit of 16 keys in the Infospoke?
    I think not because I created this on another system and there worked.
    Thanks,
    Piercarlo

  • An RFC destination could not be specified for the logical system

    Hello Experts,
    I am trying post goods receipt in EWM system in a simple inbound delivery process. It is not getting posted back in ECC. I have my RFC connection setup properly(I assume since I was able to transfer inbound delivery to EWM in first place).It seems some setting related to Outbound queue in EWM is missing.Can anyone tell me in detail what settings are required?Is it something to do with WE20 transaction?I am not sure what settings should be done there.The error log is as below-
    An RFC destination could not be specified for the logical system
    SB3CLNT011
    Message No. B1550
    Diagnosis
    An RFC destination should be specified for the logical system SB3CLNT011.
    This could not be done in this case. SB3CLNT011 is not your local logical system
    and this system is not included in the relevant Customizing tables.
    Procedure
    Check:
    RFC
    destination
    Port
    definitions
    oubound partner profile of
    message type SYNCH for this logical system
    Regards,
    Khushboo

    Hi Oritra and Suraj,
    I have checked remote connection in SM59 for both the logical system.It works fine.I understand this is more of a technical issue,but I don't have A local basis team to help me so reaching out to experts here.Can you guide me what technical settings could be checked for EWM-->ECC connection?When I execute BD82 for SB3CLNT011 it shows me green status with message "No messages have been defined for the selection conditions in the model".
    Although when I do this for EWM logical system SB3CLNT012 it shows me this with all green status-
    System SB3CLNT011 as a partner type already exists
    System SB3CLNT012 as a partner type already exists
    Port A000000018 with RFC destination SB3CLNT011 already exists
    Outbound parameters for message type SHP_IBDLV_CHANGE SHP_IBDLV_CHANGE01 already
    Outbound parameters for message type SHP_IBDLV_SAVE_REPLICA SHP_IBDLV_SAVE_REPLI
    Outbound parameters for message type SYNCH SYNCHRON already exist
    Am I missing something in WE20?
    Regards,
    Khushboo

  • Some sounds don't work in Logic for me

    Hi.  I'm running Logic 9 on a 2010 13 inch MacBook Pro 2.4 ghz 4 GB OSX 10.6.7.  Logic works perfect for me except that every now and then a few select sounds do not work.  In fact, they do not load and cause my Logic to freeze and crash.  It is very frustrating because the sounds that do not work are dispersed randomly and I forget which one not to click and then my entire project is lost.  I can give you some of the sounds that I know off the top of my head that cause logic to crash: Orchestra>Choir>Chamber Ensemble, Gregorian Ensemble.  I noticed this folder around half don't work and then other folders 1 or 2 sounds don't work.  I would say that it's only about 1% of the entire library.
    I'm pretty sure it is not a memory problem because the files selected are no bigger than other files I select.  I thought that the files might have been corrupted somehow, so I actually reinstalled Logic 3 times, but I get the same problem.  I downloaded all the updates. I also checked my hard drive and there are no problems with it.  My only guess is that somehow the discs I bought did not get manufactured 100% correctly and some files did not get burned on properly.  I don't see how only a few select files wouldn't work, but I had bought some blu-rays before where it would freeze at a certain section and I exchanged it for a working copy.  Anyone have any leads or suggestions? 
    Thanks in advance,
    Richard

    Update 2:  I just went to the Genius Bar and they gave me a new copy of Logic.  I erased and installed my laptop once more just in case and installed Logic Pro.  I got the same problem.  Deductively, I beleive it's my laptop that is the source of the problem.  My laptop is working perfectly fine otherwise though.  Any ideas?

  • How can I make sure iTunes doesn't stop updating my podcasts

    OK I'm subscribed to multiple podcasts, but I don't always get a chance to listen to them so some of them will stop updating and it says something like "iTunes has stopped updating this podcast because you haven't listened to any episodes lately".
    How can I make sure it doesn't do that? When I do get to listen to my podcasts, I would really like it if they weren't 3 weeks old.
    Message was edited by: MacAttakk

    someone made a script that fixes this. It seems to work for me. If you want it to do it automatically just make an iCal even for every 3 days or something that runs this script.
    http://dougscripts.com/itunes/scripts/download.php?sc=updateexpiredpodcasts

  • CSS (some, not all) not showing up in browser, but fine in DW. Plus other desperate issues....

    I would really appreciate any and all help I can get to solve these problems as I'm new to CSS/HTML (completely new) and have been attempting to code my design just well enough to get it uploaded and working as a site. Once I can atleast achieve this feat, I plan on completely converting to CSS. But for now, I need to get the site working and I really didn't want to come and bother all of you on here with my problems and have been procrastinating posting on here for absolutely ages now....but since I can't figure all of the messy-uppy ness going on on my own, I beg forgiveness for any of your time wasted on my problems .
    Okay, so the "main" issue here is that I can see some(some, not all) CSS on DW, but I see NONE whatsoever when I go to preview in browser, same after uploading. I do have all of the files uploaded and placed in the correct directories, including the stylesheet, and images folder. But, nope, nada. Now, I did think this was a root/directory problem, maybe the url's weren't pointing to the right directories. I checked and attempted to fix this several times and any changes made no difference. Also, uploaded to the root of my site, where all files and folders are where they should be, yet no change. I am utterly clueless as to what is going on here....
    Second: Padding, or margins added through CSS for the divs is simply not working in DW or otherwise. I have padding placed on all of the content type areas with writing/content in them and despite the fact that the changes to the font/text formatting I've made show up, the padding does not. This is only in DW since no CSS whatsoever is showing out of DW anyways. I would like to know how to get the padding and the formatting, just all of the CSS in general to actually show up in browser/when uploaded.
    Third: The next issue is also confusing, and this only occured after I made the page into a template and uploaded the home.htm page I created from it to my site. For some reason, the image called "../images/aurora2_14_content_marg.gif". Is appearing at the very top of the page for no reason at all. I don't understand why it is there, or how it even got up there in the first place.
    Fourth: This was actually next on my list of things to figure out once I've gotten all of the above issues taken care of but since I'm still drawing a blank after 2+ weeks on how to get this done in a way that will work I guess it couldn't hurt to ask on here and get some expertise on the matter. The issue is that I have a repeating background (images/bg.png) that I want stretching downwards as I add content to the page. I have this placed as the main background for the entire site as you will be able to see in a moment through my code/site. Now, the place I want this to start is from where the aforementioned image (../images/aurora2_14_content_marg.gif) stops. However, I want the content to actually start from 20 pixels or so from the top of that very image. I want to try and achieve this through the use of margins but since the margins and padding are not showing up I hve been unable to experiment with it enough to figure out any other way to achieve this.  Any suggestions on how to achieve this would be much appreciated.
    Fifth (yes, unfortunately we're still going): As you may be able to see through the design I have two seperate areas for the main content and the navigation and other such items to be placed. To clarify, the content will be placed(through the use of expandable content boxes, once I figure out how to work that) beginning at the aforementioned image/td/div (../images/aurora2_14_content_marg.gif) with a bit of padding or margin from the top and sides (too pull the content towardsthe center of the site rather than all over from left to right like it is appearing now). The navigation etc will be placed where the long cyan area is under the search bar. For both of these, I cannot figure out how to split my one background image and also the content_marg.gif image into the two divs/or whatever else would work to split their contents from eachother. I think that seperating them into 2 divs with padding from the sides and eachother and seperate top paddings (I want the navigation to begin more near the top of the page than the content). The issue here is, I cannot figure out how to do this.
    Any and all suggestions would be greatly appreciated. Also, any tips on how to achieve the code for the solutions provided would also be very much appreciated, as I am only just starting out coding.
    The site/page:
    http://aurora.comeze.com/home.htm
    The stylesheet (style.css):
    http://aurora.comeze.com/style.css
    Like I mentioned above, all of this except the padding shows up in DW. Whereas, none of this shows up at all in browser view, or through the site.

    Summary of issues #1 through #5:
    Code errors galore:
    http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Faurora.comeze.com%2Fhome.htm
    Photoshop generated HTML.
    20th century table based layout with endless spacer gifs.
    START OVER
    From Tables to CSS Web Design Part 1 -
    http://www.adobe.com/devnet/dreamweaver/articles/table_to_css_pt1.html
    From Tables to CSS Web Design Part 2 -
    http://www.adobe.com/devnet/dreamweaver/articles/table_to_css_pt2.html
    =========================
    DW Starter Pages (CSS Layouts)
    http://www.adobe.com/devnet/dreamweaver/articles/introducing_new_css_layouts.html
    =========================
    Taking a Fireworks (or Photoshop)  comp to a CSS Layout in DW
    Part 1 - Initial Design
    http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html
    Part 2 - Markup preparation
    http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt2.html
    Part 3 - Layout and CSS
    http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt3.html
    ========================
    HTML & CSS Tutorials - http://w3schools.com/
    Learn CSS positioning in 10 Steps
    http://www.barelyfitz.com/screencast/html-training/css/positioning/
    How to Develop with CSS?
    http://phrogz.net/css/HowToDevelopWithCSS.html
    ========================
    Code Validation Tools
    CSS - http://jigsaw.w3.org/css-validator/
    HTML - http://validator.w3.org/
    Best of luck,
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/

  • HT1689 I subscribe to my video podcasts but some of them either has a small red E next to them and won't download new content or some just doesn't download new content. I have been watching the Rachael Maddow video podcast for at least a month with no pro

    I subscribe to my video podcasts but some of them either has a small red E next to them and won't download new content or some just doesn't download new content. I have been watching the Rachael Maddow video podcast for at least a month with no problems. Now suddenly it won't download the last nights show. I have read and followed all troubleshoot and cannot find a solution. I have unsubscribed and re-subscribed to no avail. Can someone help me with this problem?

    keian27 wrote:
    And now that my contract has expired, I have some options.  Last weekend, I called Verizon again threatening to leave.  The representative offered the same $75 rebate that was offered to me 6 months earlier.  I even offered up one of my device upgrades in place of a network extender, but that deal was knocked down.  And so now I’m left with the option to make a public spectacle out of this scenario and hope Verizon takes notice.  Failing that, I’ll be forced to leave Verizon behind.
    I don't understand. If having service in your home IS important to you and you already know Verizon's policy, why have you not instead started to search for carriers which cover your home? It seems a pretty easy decision to me, at least.

Maybe you are looking for