Some of my AOL mails are not loading properly when using Firefox, they do come up when I use the AOL desktop, but they are S O SLOW

I have been using Firefox for a long time now since AOL became
S O SLOW with their Desktop Version in loading up mail.
But in the last two months I have been loading my AOL mail and some of mine and my husband's do not come up at all, even when they are forwarded by other people.
The header is there and it says the mail was loaded, but nothing in the actual page comes up

OK you need to upload these images to your remote server because they are missing from the server or that they have gone to a different folder.
http://www.elchocomining.net/double%20drawings/Florentino.jpg
http://www.elchocomining.net/double%20drawings/Mujer+matracaA.jpg
http://www.elchocomining.net/drawings%20/DJMujerarreglandocanal.jpg
http://www.elchocomining.net/drawings%20/DibujoProhibido.jpg
http://www.elchocomining.net/drawings%20/LTCocinaA.jpg
http://www.elchocomining.net/drawings%20/BbTrilladoradeArroz.jpg
http://www.elchocomining.net/drawings%20/TallerCoserA.jpg
In future always define your site correctly with all folders and file names without spaces in them. For example "drawings 20" is not a good name. You should rename it to "drawings20".
When you have corrected this especially when you have uploaded the photos again then they will appear all right on the page. after that you need to validate your pages for correct HTML and CSS but this can wait for now.
Good luck.

Similar Messages

Stationary credated in Mail does not appear properly when viewed in Outlook, is there aroundthis?

Stationary credated in Mail does not appear properly when viewed in Outlook, is there around this? Or, can I export (as a PDF) the email drafted in Mail with stationary that does not have the meail info on top of the page . Thanks so much for your help.

No real solution to problem 1, stationary tends to look different depending on the client, as for 2 Mail does not export to pdf but can print to pdf, however you still get the mail headers.

Keep getting a pop up at the top of many websites I visit 'firefox security error content at *web address* may not load" I am using the most recent firefox and windows 7.

Keep getting a pop up at the top of many websites I visit 'firefox security error content at *web address* may not load" I am using the most recent firefox and windows 7. This is happening at many sites, such as hotmail, google reader, and many others.

Sorry, I don't think that is a message from inside Firefox, the wording doesn't sound correct - at least the beginning of that message. My "gut" thinks that is a MSN Live message to explain and compensate for their lack of security with a re-direct from a secure domain to an un-secure domain. ''(the end of that message)''
{Ctrl + Shft + J} will open the Firefox Error Console - I'm curious what Firefox has to say about that situation. If you find the error message for that domain, you can right-click the message to '''copy''' it and then paste that error message here.
Maybe '''TonyE''' or '''cor-el''' will be more familiar with the situation at Live and maybe at Google Reader, I don't use either of those services and have never seen a message like that myself.

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

ITunes 11 will not load properly when Windows 7 starts

Hi Everyone,
I'm running Windows 7 64bit, iTunes 11. I successfully ran iTunes 10 on this PC previously.
iTunes is configured to launch when Windows boots. What happens is that it does start, and then the 'Checking iTunes Library' message appears for a few seconds. iTunes appears on the Task Bar during this period. The 'Checking.." message disappears, and then so does the icon in the Task Bar.
When I check Task Manager iTunes appears on the Processes tab in the Image Name list as: iTunes.exe *32, so it is loading, but there is no GUI interface available.
If I kill the task manually, and then start iTunes from the shortcut everything works fine.
Here is what I have tried to do to resolve this:
1) run msconfig and disabled Apple Push
2) removed and reinstalled Apple Quicktime (after downloading latest version)
3) unchecking all other start processes in msconfig to see if iTunes would load (it did not)
I have not found other suggestions so I figured I should post this and see if anyone else has some advice on how to get iTunes to load properly when I boot my computer.
Here are some details on the computer:
MB - Asus PZ77-VPro
CPU - i7-3770K @ 3.5GHz
RAM - 32 GB
VC - nVidia GForce GTX-670
C: HD - 120 GB solid state drive (this is where itunes is intalled)
E: HD - 2GB Raid 0 (this is where the itunes database has been installed)
I would appreciate your help after a morning of unsuccessful troubleshooting.
Thanks,
James

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

Task Manager Not loading Properly. Giving Error No more threads can be created in the System.NAPStatus UI and Some other Task related Errors

I have a problem with the Task Scheduler. It is not opening properly it is giving Error Message box at this time i am unable to post. The Tasks Scheduler is starts with a error alert "No more threads can be created in the System.NAPStatus UI".
I am unable to view the history of the tasks schecduled.It is giving message as
"The user account does not have permission to Access the Task History."
How to fix it. It is frustrating as can't able to track my Tasks and Create new Tasks. Any Suggestions helpful.
Thanks in Advance.
RehaanKhan. M

Hi,
Thanks for your post.
Please check event viewer if there are some error logs?
Meanwhile, there is a similar thread has been discussed:
Receiving error about "no more threads"
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9a9e22e4-d947-4d19-b06c-aaadda624dbc/receiving-error-about-no-more-threads?forum=winservergen
Regards.
Vivian Wang

Websites not loading properly just shows "transferring data" nothing comes up

hi I'm using Firefox 8.0 on my windows vista laptop. If I'm on a web page (such as google news), most links will load OK> however certain links I click on will open a new window that shows "transferring data from ..." but page never loads. If I close the window then click on the SAME link again it usually loads rite up. I've tried other browsers (chrome) & this doesn't happen. I was going to switch because it's really annoying, but I like Firefox a lot. Any suggestions? I have followed the instructions for "certain websites not loading" and this didn't help.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls
*http://kb.mozillazine.org/Error_loading_websites
*https://support.mozilla.com/kb/Error+loading+web+sites

Master slide images not loading properly when previewing or when published

I have created a master slide (including image) to be the background for my piece. The image looks fine when I am in Captivate but when I preview the project the image does not display fully and only shows up bright bright white. I tried publishing to see if this would make a difference but nothing. I am using a jpg image.
Has anyone encountered this problem or does anyone have any ideas how I can make the image display?
Thanks
Jodie

What is the slide quality? Default setting is Low (8-bit), depending on your JPEG-image quality this may be too low. Try to change to High or Optimized and see if this is better.
Lilybiri

My iPod does not work properly when plugged into the computer. How to fix?

I have a 4th generation 40 gigabyte iPod, non-color.
Today, I plugged it into my computer to update my playlists.
My iTunes and Windows were lagged down. Eventually, when things caught up, my iTunes didn't show my iPod as being connected. I looked in My Computer, and it didn't say iPod -- it said "Removable Disk". I couldn't disconnect my iPod via Windows, even using the Safely Remove Hardware didn't work.
After looking around here and trying things like Disk Mode and Resetting the iPod, nothing worked. I can't get the iPod to work with the iPod Updater so I can try restoring it.
I dunno really what to do. If it's a hardware problem, then I'm not going to bother to get it repaired, since the music that's currently on it plays perfectly fine still.
I just dunno what else to try.

you basically are stuck. apple won't do crap for you. i went to the apple store today because my second ipod crashed (the first one they replaced) and they won't do anything for me and told me i had to buy a new one (2 in 1 1/2 years is what happened) so they wanted me to buy a third one when their product obviously *****. and the manager even basically admitted that the ipod that they claim is durable and relible isn't. that people go through 3-4 a year. the supposed "apple genius" told me to send it out to a third party repair. he wouldn't even look at it and lectured me for not getting the extended warranty. if you look at the website below and read you'll find that a lot of people got screwed over like me with the extended warranty;
http://www.consumeraffairs.com/computers/apple_ipod.html
put it this way i won't go back to that apple store again or purchase another ipod. ill keep my piece of none working crap

Primavera Web services does not work properly when I move the database.

I am using primavera web services to integrate a winform application (using c#) with primavera. It was successful with my original database, but when I decided to move my database to another server ( It is a sql server 2005 database and I use backup/restore to move database to new server). I changed the database configuration for the webservices so that it refers to the new database on the new server.
I used the following code to login to webservices:
                AuthenticationService authService = new AuthenticationService( );
                authService.CookieContainer = new System.Net.CookieContainer( );
                authService.Url = _P6wsAuthenticationService;
                Login loginObj = new Login( );
                loginObj.UserName = pv_Username;
                loginObj.Password = pv_Password;
                loginObj.DatabaseInstanceId = 1;
                loginObj.DatabaseInstanceIdSpecified = true;
                loginObj.VerboseFaults = true;
                loginObj.VerboseFaultsSpecified = true;
                LoginResponse loginReturn = authService.Login( loginObj );
                cookieContainer = authService.CookieContainer;
               ReadDatabaseInstancesResponseDatabaseInstance[] readdbInstances = authService.ReadDatabaseInstances("");
the loginResponse for the new server is true and it shows the db properties correctly in readdbInstances. But when I try to read projects from database it returns nothing. It doesn't give me any error message just the response message is null.
Could anybody help me with this issue?
Thank you

Thanks Frank for help us, but when I writing this comment we are doing at home. So, we going to test the page in a stand alone weblogic server 10.3.5. We wrote the URL as :
" http://<our ip>:7001/myApp/faces/index.jspx "
this application contains a report desing and compiled with iReport 4.5.1 ( last version in the moment ), we can see the report when I press a commanButton without any problem.
But now, we need try your suggestions in the office, and give you more information about it . Thanks for the moment.
In the Afternoon we gonna give you more information about it .

Firefox will not load up when i click the icon on my desktop, but still the same problem, i have checked and its loaded in the task manager and just wont load up, any help on this matter is strongly welcomed thank you mark

as said nothing happens, i click the icon and nothing loads up. i have used 3 anti virus and spyware malware etc etc for 3 days i have been trying this, please note this install of windows 7 is fresh 5-6 days old. firefox was working fine then one day i tryed it and nothing.

Hi,
a) I don't have DMG either in applications but I have '''Document''' instead.
So '''set "Document" to Always Ask '''going to Firefox>Preferences>Applications
Now it will always ask if you want to Open or Save the file.
b) If already downloaded, check what's under Get Info > Open with
It should say Open With DiskImageMounter (see pic)
https://support.cdn.mozilla.net/media/uploads/images/2014-07-24-03-56-33-60e1a9.png
If not, select it. It's in Home>System>Library>CoreServices.
See if it helps.

Website Not loading properly when CDN is used(only in firefox) ?!

I am designing a joomla 2.5 based website www.entrancesuccess.net which is using MAX CDN .This
Website is built in HTML5 & CSS3
When i used CDN:
The website loads horribly. All the text formatting is lost.
When CDN is off:
Everything is fine
All other browser's Opera,Chrome,IE8+ doesn't has this weird problem

I take it that CDN refers to Content Delivery Network? Can you switch networks? Your page has some errors on it, according to the validation.
* http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.entrancesuccess.net%2F

TS3408 my safari is not loading properly

my safari is not loading properly. when browsing many ads pop - up.

Identify and remove adware
http://www.thesafemac.com/arg/

My e-mail is not loading and some plug-in are not working after upgrade.

My e-mail does not load, but I can load it in Internet explorer
my wed site does not show my talking characters after the firefox up-grade

you should visit apple genius at apple sotre .

Mac mail will not load emails anymore, just keeps "Loading..."

Hello,
For some reason, mac mail will not load previous emails. It is only one account, when I click on that mailbox, it just keeps "Loading" and never retreives emails. The acounts are fine. It was fine 5 minutes ago, now it is not. This has happened once in the past and it was never resolved. I recreated the account, and lost all the emails.
Please help!
Thank you,
Greg

I just discovered I was a life saver, thanks for the kudos everyone.
Why? It's not your fault. It's because how Apple Mail stores mail, it simply is not robust enough.
A robust program assumes that it may crash at any moment while writing to any of its files, and that there will be undiscovered, rarely occurring bugs that will have similar effect. The damage it does needs to be detected later and then repaired automatically or degraded gracefully so only one mail is lost, and not all of them.
Evidently, Apple fails to do so or didn't do a thorough job.
For mail this is really urgent, because a mail program does many things simultaneously which increases the chance that things go wrong once in a while, and on top email comes from the wild world outside and can contain many types of junk that need to be contained. Mail server delivery data muck, deliberate attempts to hack your mailbox by mail, phishing attempts, html newsletters made by Neanderthalers or marketeers, other buggy mail programs, poorly made phising mails, regular spam, you name it.
So there are a lot of possible 'runaway cars' that may dent another in the parking lot, but this should never cause an entire parking lot building to tilt so all the cars roll to one side of the floor and while still there, can't open the doors anymore.
Computer science made many solutions for this the past 3 decades and it isn't even that hard to do, many file formats have auto-recovery features.
For example: You may have seen a movie on TV or internet, or skype conversation that goes into "weird blocks" a few seconds and then go back to normal. That's damaged data and auto-recovery of the data format kicking in to fix it or at least reduce the damage. Without it, you'd be looking at digital snow for the rest of the show. Apple does the latter to your mail.
In modern databases this is done all the time, because a company can't afford to lose all of its financial data because 1 record went bad or there once was a power outage. For a user, losing his/her mail can be just as catastrophic. If they can, Apple can. Come on.
But that answer won't help ya, unless someone at Apple actually READS these threads and feels intense SHAME that they did not listen to that inner voice saying: hmm it looks spiffy now but we really gotta work on the internals a bit more. No, data is not sexy. Yes, it's boring. But it's necessary. Remember Steve's step father taught his son that the backside of a drawer should also be made neatly. Dad was right folks.
Since this mail I'm going into my 3rd combat with Mocrosoft Exchange which is another factor that, while it should be better than regular mail, also is another rogue runaway car that dents the fragile internal file structure of Apple Mail.
Yours truly, an Apple fanboy.

Some of my AOL mails are not loading properly when using Firefox, they do come up when I use the AOL desktop, but they are S O SLOW

Similar Messages

Maybe you are looking for