Some of my applications and/or folders got corrupted after using Migration Assistant

Hello,
Had an iMac with Snow Leopard installed (1 single admin user).
Also had a Mac Mini with Snow Leopard installed (1 single admin user).
Got everything transfered to a single brand new MacMini with Lion pre-installed using the following method:
- Started the new Mac Mini from scratch and used Migration Assistant during setup process to import ALL data from old MacMini (user, applications, settings and other files) using ethernet connection.
- This went perfectly well with 1 or 2 minor errors regarding 1 or 2 startup items but resolved with erasing and re-installing them.
- Applied all available Software Updates to get an updated version of Lion (10.7.5)
- Then launched Migration Assistant from the new Mac Mini to import ALL data from iMac (user, applications, settings and other files)
- This went well as I got the same message than previous transfer (all data was transferred OK)
- Also got another message saying some X folder was not compatible with targeted system and same with some CHUD folder.
I finally got my 2 admin users gathered onto the single new Mac Mini in 2 separate admin user sessions.
If an app was already transferred from the old Mini but also installed on the iMac it did not get transferred from the iMac thus keeping the Mac Mini version.
For such apps I have permissions issues and some of the folders used by the 2 different admin users such as /Movies or /Documents are locked depending on which user session is opened.
I tried repairing permissionsusing Disk Utility but with no success.
I also tried to delete and re-install these applications but it did not work.
Last chance was to grant full access attributes to the related folders via their information panel or System Preferences (User & Groups tab) but it did not work either.
Could somebody please explain the background for this issue and how could I solve it?
I am thinking of re-installing Lion from scratch, transfer the old Mac Mini again (ALL data) and then import iMac user but only USER data (not applications and settings). Would it work?
Thanks for any help you could provide,
François

I was finally able to fix this by using a couple of preference management utilities. Either I missed a key preference file for each app, or there are some hidden preference files, but when I used the prefence management utitilities (such as Preferntial Treatment, PrefEdit, Defaulter, or PlistEdit Pro) I was able to look at the prefs for Firefox and Photoshop CS2 and see where the hostname for the my old G4 was listed. (in the case of Photoshop CS2 it was actually in the list of recently opened files!! I should have noticed that from within Photoshop)
Now that I've removed those entries from preferences both Photoshop and Firefox run without prompting that the old G4 had to mounted.
oh, also... I found that for both Photoshop & Firefox I could actually get them to work without mounting the old G4's root volume - it just took clicking past the pop-ups (about 10 of them for each app) and waiting a long time as it searched around for the next one (maybe about 10 minutes total ... normally I don't have time to waste like that, but I got curious and made the time).
Thank you for your suggestions. as I had suspected, Migration Assistant moved some preferences from the old G4 that had it's hostname embedded and for some reason the apps weren't clearing them out when they were launched on the new machine (again, odd since I didn't have Migration Assistant move the apps from the old G4 to the new G5 - I installed each app on the G5 as a new install (aka: a "clean install") to avoid just this type of problem).
My real thanks are to the authors of the above mentioned preference management utilities.
Quad Core PowerMac G5 Mac OS X (10.4.3)

Similar Messages

I bought a new computer running Lion 10.7.3 and transferred my applications and files from my old Mac using migration assistant but I can't find/transfer my photos from iPhoto and I can't find my old documents such as previous tax returns.

I bought a new computer running Lion 10.7.3 and transferred my applications and files from my old Mac using migration assistant but I can't find/transfer my photos from iPhoto and I can't find my old documents such as previous tax returns.

Look for them on your old computer, when found copy the files to a USB drive and move them to the new computer.

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If th

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If this is recommended, I would need complete instructions on doing this. I have there serial number for the product.

using migration assistant is problematic.
at this point yes, you should uninstall everything migrated, clean and then reinstall properly using the installation files.
cleaner: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
installation files:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

HT4889 After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?

After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?
13-07-03 6:24:12.447 PM com.apple.launchd.peruser.502[1632]: ([0x0-0x5be5be].com.jetbrains.intellij[5805]) Job failed to exec(3) for weird reason: 13

What is the exact name of the application you're trying to launch? Is it in the Applications folder?

Duplicate applications after using Migration Assistant

I'm posting this because I haven't seen this topic addressed yet regarding using Migration Assistant for transferring data from old G5 to new Mac Pro.
I used the Migration Assistant, which took hours to transfer data and stopped the first time due to a power backup overload. The second time I ran it, everything had transferred successfully, and I've been using my Mac Pro for almost two weeks now, with slight glitches that have been easily solved.
Here's my situation: In my Applications folder, there are a number of applications that have "(from old Mac)" as a suffix. Specifically, all of my Adobe Creative Suite applications have duplicates, as does Cocktail Extras, Corel Painter IX, DiskTracker (Mac OS X), Extensis Suitcase X1, Fetch 4.0.2, Finale 20045 and 2005b, and FontDoctor X for Macintosh.
Needless to say, I would like to recover the additional disk space that these duplicates are occupying, but is it okay to simply trash the ones that say "(from old Mac)", as I backed up my old G5 right before runnning the Migration Assistant, and I still have it sitting here, just in case something bad happens while I'm in the middle of a project? Or, should I trash the new ones? The Creative Suite apps have been activated on the Mac Pro, so I'm assuming that the "old Mac" ones could be deleted.
Anyone having any experience with this? I don't want to reinstall a lot of things unless I have to, as I will be upgrading a lot of the apps as soon as Intel-native versions are released, and things are working well so far.
Thanks for any advice you can give me.
2 x 3 GHz Dual-Core Intel Xeon Mac OS X (10.4.8) 8 GB RAM
1.8 Mhz G5 Mac OS X (10.4.2)

Yes, it's OK to trash them. You have transferred items that are from a PPC Mac to an Intel Mac that apparently had Intel versions of the same software already installed. You definitely do not want PPC versions (this does not apply to most Adobe software which is PPC-only.)
Unfortunately, Migration Assistant doesn't always know when not to transfer PPC software to an Intel Mac. This is especially a problem for the /Home/Library/ and /Library/ folders because MA may overwrite Intel components with PPC components. This can cause the Intel Mac to run slowly or not at all.
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3 or G4 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior (does not work), TechTool Pro (pre-4.5.1 versions do not work), SuperDuper (newest release works), and Drive Genius (untested) may not work properly on Intel-Macs. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode or copying the critical contents to CD and DVD or an external hard drive will work better when moving from PowerPC to Intel Macs.
Basically the instructions you should follow are:
1. Backup your data first. This is vitally important in case you make a mistake or there's some other problem.
2. Connect a Firewire cable between your old Mac and your new Intel Mac.
3. Startup your old Mac in Target Disk Mode.
4. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
4. Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/com.apple.mail.plist (* This is a very important file which contains all email account settings and general mail preferences.)
/Home/Library/Preferences/ copy any preferences needed for third-party applications
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to another forum user for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Unfortunately, if you find problems with your new computer it may be due to problems that arise when migrating from a PPC Mac to an Intel Mac using Migration Assistant. If this be the case your only recourse is to reinstall OS X. You should also reinstall your third-party software (or update it) to be sure you are using universal binary versions (if available.)
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

After using Migration Assistant some apps need to mount old drive

I recently used Migration Assistant to move ONLY my account info & files from my old G4 (running 10.4.3) to my new G5. I did NOT have it migrate any of my installed apps - I did clean installs (and then upgrades) of all apps.
Unfortunately a few apps ask to mount the old G4 drive before they will finish launching. Am giving the option to Cancel or Continue - if the old G4 is not on (with file sharing enabled) the affected app will hang, if the old G4 is on then clicking Continue will automatically mount it and the app will then work without problem.
Obviously there is a preference that was migrated from my account on the G4 to the G5 that has the old hostname embedded in it that is causing this. I have deleted all preferences (and other associated files) that I can find for the affected apps and then re-installed but still cannot run these apps without first mounting the old G4's drive.
The affected apps are Firefox and Photoshop CS2. Other web browsers such as Safari & I.E. work without problem, likewise for other Adobe CS2 apps such as InDesign & Illustrator. All of these apps were previously installed on the G4 when I did the Migrate - all were re-installed on the G5 instead of being Migrated.
Any ideas?
Best I can think is that some preference for these apps was moved from the G4 to the G5 when I migrated my account files/settings, but I've yet to be able to find it. (I even got so desperate as to try a recursive grep from / of * for the hostname of the old G4 and haven't found anything)
Thanks in advance.

I was finally able to fix this by using a couple of preference management utilities. Either I missed a key preference file for each app, or there are some hidden preference files, but when I used the prefence management utitilities (such as Preferntial Treatment, PrefEdit, Defaulter, or PlistEdit Pro) I was able to look at the prefs for Firefox and Photoshop CS2 and see where the hostname for the my old G4 was listed. (in the case of Photoshop CS2 it was actually in the list of recently opened files!! I should have noticed that from within Photoshop)
Now that I've removed those entries from preferences both Photoshop and Firefox run without prompting that the old G4 had to mounted.
oh, also... I found that for both Photoshop & Firefox I could actually get them to work without mounting the old G4's root volume - it just took clicking past the pop-ups (about 10 of them for each app) and waiting a long time as it searched around for the next one (maybe about 10 minutes total ... normally I don't have time to waste like that, but I got curious and made the time).
Thank you for your suggestions. as I had suspected, Migration Assistant moved some preferences from the old G4 that had it's hostname embedded and for some reason the apps weren't clearing them out when they were launched on the new machine (again, odd since I didn't have Migration Assistant move the apps from the old G4 to the new G5 - I installed each app on the G5 as a new install (aka: a "clean install") to avoid just this type of problem).
My real thanks are to the authors of the above mentioned preference management utilities.
Quad Core PowerMac G5 Mac OS X (10.4.3)

Windows Mail Folders gone in Mac Mail after using migration assistant

I purchased a MacBook Air for my husband and used Migration assistant to transfer all of his files from his PC running Vista. It looked like everything was fine, but when I opened Mac mail, the only messages that were in there was what was in his inbox, junk and trash. Where are all of the folders from Windows Mail he had created? Please help!

Mac migration does not always work with Cloud programs
Uninstall... run the Cleaner... Restart your computer... Reinstall
-http://helpx.adobe.com/creative-cloud/help/install-apps.html
-using the cleaner after uninstalling and before reinstalling will usually help
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

OMG, Lost iphoto08 library and settings after using migration assistant

I wanted to back up all files from my ibook on my new Intel imac using migration assist. All the user settings and names were the same on both machines so it put all the files on my main user account, which seemed to just merge music and documents together. But when I opened iPhoto08 it said it needed to convert the library from the older version on ibook.
Now the library of thousands of photos that I'd put on my imac is completely gone. Searching frantically, but nothing there! This includes several rolls I've taken on holidays.
Please say they are recoverable somewhere as I can't imagine they've just been deleted? They don't appear anywhere in my user "pictures" folder or anything.

Thanks TD,
But it wasn't in my picture folder. Only one library in there. Have just figured out that when I used the migration assistant from my ibook it deleted my old user profile with all my pictures in it. Have just now found the old library. Now have two photo libraries so have to use iphoto library manager to switch between them.
Cheers for the quick response!
Message was edited by: kessonovitch

Relocating music files after using migration assistant and time machine

Hello
I recently purchased an i7 MBP because my previous 15 in was stolen. Luckily I had a time machine backup of the old machine - my previous MBP was the Intel 2 Core Duo model just before the refresh to the i5/i7s
So far what I did is ran migration assistant to bring my files over
Everything seems to be fine, except when I got to iTunes much of my music is listed but I get the exclamation mark symbol next to most of the music and movies and apps
I am trying to figure out how to fix this and relocate my files
I know I could access my time machine backup by browsing other time machine disks, but I can't browse the music folder in a previous backup because I don't have the permisson to access it
Any suggestions would be greatly appreciated!!

Victor:
If you correctly transferred your music files the problem is with your iTunes Library file.
Open iTunes and quickly press the option key. A window will show to ask you to select the library file. Browse for it and it should fix the problem.

Missing notes and documents after using migration assistant

Hey there,
I recently "killed" my macbook with a glass of water and tried to at least save all my documents, notes, safari-bookmarks and anything else from the hard disk.
I managed to copy all my word / excel documents and downloads and photos etc. manually to another mac, but I'm struggling to find my notes from the desktop bar. I tried using the migration assistant to get them from the hard disk to the new mac, but they are just not showing up, when I open the notes on the desktop bar of my migrated user account on the new mac. Also none of my documents, which I copied manually to another user account before, are showing up. Except for my Safari bookmarks and contacts nothing seems to be moved to my new mac.
Has anyone dealt with this problem, too and knows how to get the notes back? Restarting the mac didn't help.

If the 2 computers have the correct cable connections, try the Target Disk Mode.
Target Disk Mode - Mavericks

After copying my Applications and Users folders to external drive using Carbon Cooy Cloner, I cannot see the files on the drive when accessing them from a freshly installed OS.

The folder where the Archive should be is empty yet activity monitor shows that the drive isn't empty

Use Data Rescue on the Mac and out the recovered files to another external drive.
Just grab your users files, the rest you trash. That's all you can do.
Good Luck

HT200169 Having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Sug

Hello,having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Suggestions?

Thanks, Ian. Yeah, that's how I do it now...or with the controls in the left side pane. Still, I would have liked that quick on-the-spot edit capability...especially while sketching.
Ian Turner wrote:
Sorry Mark, you are out of luck as it does not do that - it works the same as L8. The way I would achieve that with more accuracy and control would be to route all the tracks you want to fade to a Bus then use volume automation on the bus. To do this you will need to add a standard audio track, then re-assign it using (Control Click on the track header) to the Bus track. You can then automate volume/plugins etc on the Bus track.
Ian

[svn:bz-trunk] 19782: Add Remoting test application and endpoints for testing login-after-disconnect channel setting .

Revision: 19782
Revision: 19782
Author:   [email protected]
Date:     2011-01-17 11:21:11 -0800 (Mon, 17 Jan 2011)
Log Message:
Add Remoting test application and endpoints for testing login-after-disconnect channel setting.
Modified Paths:
    blazeds/trunk/qa/apps/qa-manual/WEB-INF/flex/remoting-config.mods.xml
    blazeds/trunk/qa/apps/qa-manual/WEB-INF/flex/services-config.mods.xml
Added Paths:
    blazeds/trunk/qa/apps/qa-manual/remoting/
    blazeds/trunk/qa/apps/qa-manual/remoting/RemotingApp.mxml

I appreciate Adobe teams efforts to reproduce the issue and acknowledged it as a Bug in AIR
But now I am waiting on them to come back with an answer - Is it going to be fixed in future versions? Is there a work around?
Is adobe even considering this as an Issue? What are the next steps after acknowleding the issue?
I hope I am not too aggressive but I also want Adobe to understand the urgency of the situation when it comes to a product release.
I have experimented with couple of work arounds but none seem to work.
If anyone has come across this issue please comment.
Thanks,

I bought a mac 2 days ago and transferred some files on there using migration assist which I did not want to. How do I restore my imac to factory settings so I can start again?

I bought a mac 2 days ago and transferred some files on there using migration assist which I did not want to. How do I restore my imac to factory settings so I can start again?

Look in /Users folder. You can go to System Preferences > Users & Groups, open the lock and "-" delete the account it created.
This is a problem whenever you use migration assistant after the initial install. The proper way to run Migration Assistant is in Setup Assistant when you first boot your Mac. I don't know why Apple isn't clearer about this issue.

How to recover Mail and Mail Downloads when you can't use Migration Assistant

I have a MacBook 2.4gHz that had a 750GB HD that crashed yesterday. Disk Utility said "This Hard Drive has failed, recover or backup what you can, then reformat." So, I removed the 750GB HD and replaced the original 160GB HD and reinstalled OS 10.7 on that Drive. I put the 750GB HD in an external case and hooked it up by USB (only available hookup with my external case). I can see all my content and tried to use Migration Assistant, but it hangs up at "preparing content to transfer." So, I decided I would have to drag all the old content onto my new user on the internal HD. I moved Movies, Pictures, Desktop, Documents, Music, and Downloads. However, I can't move any of the parts of the hidden User Library, primarily because I can't find or see it.
My question is how to access the User Library in a non-bootable (although having OS 10.7 installed) External HD. I've tried the ~/Library/ in Go>Go to Folder, but it goes to the running HD User folder, not the external. Can anyone tell me how to crack into this folder? I'd like to retrieve preferences, mailboxes, address book, etc.
I realize it could be lost, but literally everything else is still present. FYI: I plan to hang onto the 750 until the replacement HD arrives, so I can be reminded what Applications I had installed. There isn't room for all of those on the smaller HD.
Thanks,
Ronda

Update: I managed to get Migration Assistant to move something, but it didn't work out as I expected. Because I've already installed the OS and some applications that I need, as well as copying over most of the user files except the library, there wasn't much room left on the smaller disk. I purchased the firewire 9pin to 6pin cable that would allow me to use the firewire port on the external drive and selected the main user. There wasn't enough room to move all of the user, so I selected only the "Other Files" folder (about 2 GB), not all the items I had already copied. I set that to install last night at 9:32pm. At 4:00am it said there was still 10 hrs and 29 minutes to go. My husband checked it at 6:45am and it said 19 more minutes. When he arrived home at 4:30pm, it was finished. When I arrived home and logged out of the administrator and in to the main user, immediately it showed my desktop with all the folders that I had placed in the sidebar of the Finder window and everything looked exactly like it had on Monday before the crash, then the beachball started spinning and when it finally came up for air, all those folders were gone, my dock appearance was gone and everything was back to the bland new user settings that Mac OS starts with.
My mail file did get moved over with its thousands of messages, but not mail uploads nor the desktop appearance settings and it doesn't appear that any other settings have migrated either. It's difficult to tell, since I can't install my applications on the smaller drive.
The replacement drive from WD arrived, but it is a 2TB "upgrade" and it doesn't even fit in my MacBook, so I have to send that back and wait longer.
I'm still trying to recover my appearance, and combine the various users into one. If anyone has suggestions on how to get the mail uploads folder, preferences, etc. I'd love to hear them.

Some of my applications and/or folders got corrupted after using Migration Assistant

Similar Messages

Maybe you are looking for