Some of my extensions don't appear on my toolbar or anywhere.

Nor do they appear within Tools on the Menu Bar. This is true for some extensions but not others. The ones it is true for, nevertheless, appear to be compatible w/ the version of Firefox I am presently running (5.0).
But the extensions appear as on/enabled on the Add-ons Manager Extension page.

are you signed in to the same icloud account on the phone?
go to settings>icloud> (verify its the right apple id) make sure calendars are on.
also you can click on calendars app, click edit i the upper left and make sure all calendars you want visible are checked.

Similar Messages

Why is it that when I connect my iPod to my car stereo through USB, some of the songs don't appear and play when these songs are on my playlist normally?

Hello all
This has been bugging me for a little while. I bought myself a new bluray player awhile back and it has a USB hookup for ipods. This goes the same with my vehicle too. I have a few good playlists with some great songs, however, when i hooked it up to my bluray player, some of the songs didn't appear in the playlist that are not normally there. I disconnected the ipod and had a look on the screen and sure enough the songs are there, but they are just not appearing on the bluray player. This only happens for some songs, not all of them. I was disappointed at this because I really wanted to hear my songs. So I decided to download the WHOLE album off of itunes from which I got the song from and sure enough, this time the song appeared on my bluray player and it played in the playlist.
Why is this? Is there a way to make it so that I can have all the songs play without downloading all of the albums?

Did the original songs that do not appear on the car player play in the Music app on the iPod? Sometimes glitches happen and they do not. Also, If y ohave a 5G iPod/iOS 7, purchase songs will show with an cloud icon by them if they are not downloaded if Shall All is turned on in Settings>iTunes and App Store

Some USBs don't appear in Finder. They appear in Disk Utilities so how do I get them to appear in Finder?

Some flash drives/USBs don't appear in Finder. But they appear in Disk Utilities so how do I get them to appear in Finder?

If you've never used them before (they are new) then they are not formatted for Macs.
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When you want to remove an external device you must Eject it:
First, select the Desktop icon of the external disk. CTRL- or RIGHT-click and select Eject from the context menu.

Some options don't appear in MAX

I have an Agilent 86142A OSA connected via GPIB-USB-HS cable to my PC. MAX recognizes it in the tree, but a lot of options (like self-test, calibrate) don't appear. I'm new in MAX, so I'm not sure whether this is acceptable or not. Have I made some error in installing the device, or do some options simply not show up for particular devices? I've attached an image of MAX in this situation.
If indeed the device is installed fine, how does one perform a test to see if the connection is good if the Self-Test icons don't appear?
Please let me know if it seems the device has been detected properly and all is well.
Thanks!
Attachments:
MAXimage.JPG ‏98 KB

Everything looks find. You are not supposed to have options for self-test or calibrate. Those would only be for NI's DAQ cards.

Some images don't appear in iPhone, but do on desktop.

Can someone download this PDF and let me know why the jpg images appear fine when viewing with desktop browser, but some images in the same document don't appear when viewing in Safari on the iPhone? Vector artwork and text show fine. Shows white space where JPGs should be.
Specifically, pages 1 and 4:
http://www.teamassociated.com/pdf/cars_and_trucks/TC6/Factory_Team/tc6ft_manual-mobile-4rg b.pdf

I just heard about this day before yesterday at the InDesign Print and ePublishing Conference in Washington, DC. When using display on an iOS device JPEG 2000 is not supported. There are two flavors of JPEG: JPEG & JPEG 2000.
Here's a Wikipedia article about JPEG 2000:
http://en.wikipedia.org/wiki/JPEG_2000
If I go to page 1 and 4 in your PDF and use Output Preview in Acrobat Pro (in Acro 9 > Advanced Print Production > Output Preview). Click on the Object Inspector tab and click on the image. It uses a JPEG 2000 filter.
Since I don't know how the image was created and saved, I'll leave it to you to resave it as normal JPEG.

Some flash files don't appear on macintosh

I've installed the latest flash player on a macintosh 10.4.11. But I've noticed that a few flash sites don't appear. Among them the flash player page itself:
http://www.adobe.com/products/flashplayer/
As you can see, where the flash movie should play there's just white space. Both on Safari and Firefox for Mac.
I've also tried in on another mac so it's not just my computer.
I've checked the version on: http://www.adobe.com/software/flash/about and that flash movie runs fine. It also says: 'You have version 10,0,32,18 installed'
At home on a pc these pages (like http://www.adobe.com/products/flashplayer) work fine. What kind of thing could make the swf disappear on a mac?

That one works fine on both macs to. It's not just my mac giving trouble. Tested in on another mac too to make sure it's not my computer. The other one has only the basic operating system (os 10.4.11) and the latest flash player and other default stuff. So no fancy additions like on mine. But the same result there:
http://www.adobe.com/products/flashplayer/ - white space
http://www.adobe.com/software/flash/about - no problem
Another site which gives white space is www.morethanline.nl. I can see the preloader, but after that the screen turns white exept for the red ribbon on the top left which says 'vacatures' . Clicking on that doesn't do anything, which I expect is because it changes the main movie in the center. Which is white so even though it would change to the 'vacatures' page, I wouldn't see it.
Is it perhaps the way the swf loads external swf's? Some way that isn't compatible on a mac and works fine on a pc? I don't know how the products/flashplayer swf loads the external movie. Do you happen to know how it is loaded? I can see the play/pauze buttons as you can see from my screendump. Just not the loaded video. Perhaps there's some specific way it is loaded which doesn't work on a mac and gives white space instead?

I can't seem to install some apps that i downloaded for my iPad from my Mac. i have tried syncing them but they still don't appear on the pad. how do i go about this?

i can't seem to install some apps that i downloaded for my iPad from my Mac. i have tried syncing them but they still don't appear on the pad. how do i go about this?

These are iPad apps correct?
Do you have restrictions set on the iPad? Settings>General>Restrictions>Installing apps>Off or Settings>General>Restrictions>Allowed Content?
Are you sure that the Apps are selected to sync from the Mac to the iPad?
Connect the iPad to the Mac and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Apps Tab on the right.
Click on Install next to the apps that you want to sync.
Click on the Sync Apps Heading to select it
Click on Apply in the lower right corner of iTunes
If you do not see the sidebar in iTunes 11 - go to View>Show Sidebar from the iTunes menu.

Some Mail Folders don't appear on iPhone/iPad

I have folders in my email account that appeared ok on iPhone 3G, but a few of them don't appear neither on the iPad or on my new iPhone 4 (more files missing on iPad than on iPhone 4).
Anyone know the reason?

Assuming the email account is an IMAP account and it must be for this, all server stored mailboxes with an IMAP account should be available with each email client used to access the account.

.m4r files sync but don't appear AND outlook contacts won't add to iphone?

hi guys,
This is my first post, made just a day after I got my iphone.
Now don't get me wrong, i love the iphone, but i'm worried i might have to send it back due to 2 glitches:
1) I exported all my contacts onto my computer from my old k800i, then imported them into contacts on outlook. Then I synced my iphone to outlook through itunes and it appears to be doing something on the itunes bar only for me to open my phone when it's done and the contact list is empty. It's synced the calender and itunes music thought.
2) I sent some ringtones to my friend who has a mac (I have a PC) and he changed them to .m4r files on that garage program on the mac, then he sent them back, i dragged them into the ringtone folder and they appeared. I went on itunes and they appear in the iphone tone menu, i sync with the actual phone and after saying it's done they don't appear in the tone menu on the phone.
That's 2 annoying things, do I need to send it back?
Any help would be great, thanks for your time.

Hi,
Please follow the steps below to make sure the reminders have been enabled in Outlook:
On the File tab, click Options.
Select Advanced in the Outlook Options dialog box.
In the Reminders section, select Show reminders.
Click OK.
I also found a similar thread here:
http://social.technet.microsoft.com/Forums/windows/en-US/70bbd99e-6c1b-4a56-b1eb-f1812f96ed56/outlook-2010-reminders-not-appearing-in-outlook-but-appearing-on-iphone
As mentioned in the thread, you can try these steps:
Use MFCMAPI to delete the Reminders Folder, then run "outlook.exe /resetfolders" to recreate this folder:
Download MFCMAPI:http://mfcmapi.codeplex.com/releases/view/118446
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If the problem persists, try to recreate the user’s profile of the Outlook to check this issue:
http://support.microsoft.com/kb/829918/en-us
Regards,
Melon Chen
TechNet Community Support

After updating to itunes 10.7 iphone and ipad don't appear

After updating to itunes 10.7 my iphone and my ipad don't appear in itunes and because of this I could not update to ios 6.
Also after installing itunes 10.7 I got 2 errors:
System extension cannot be used
The system extension “/System/Library/Extensions/IOFireWireMxBt.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
System extension cannot be used
The system extension “/System/Library/Extensions/MaxtorPowSecDriver.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
I try to uninstall and reinstall and everything is the same.
There is a bug in this new version of itunes for mac os x
I am using OS X version 10.8.2 with all the latest updates.

I downgrade to itunes 10.6.3 and the error still appears.
I have to download this utility http://www.macroplant.com/iexplorer/download-ie3-mac.php
And I deleted this file:
/private/var/mobile/Media/iTunes_Control/iTunes/iTunesCDB
That fix the problem.
Now my iphone is working without issues on latest version of itunes 10.7

Plugins don't appear in after effects, I followed all the instructions?

I am using Adobe After Effects CS5.5, and I recently tried to install some Video Copilot plugins. I followed the installation instructions and copied them to the plugins folder, but the plugins do not appear in the drop down menu.
Here are some pictures:
Does anyone know why this might be happening? I restarted after effects after copying the plugins to the plugins folder, and they still don't appear.
I am running Adobe After Effects CS5.5 on Windows 7 64-bit.
Thanks!

Another thought, because you have Boris CC7 installed, which takes up so much space in the effects menu, is that AE can only display a finite number of folders in the Effects menu. Once that limit is reached it will stick all the remaining effects in a folder at the very bottom of the list (called additional effects, or something like that...?)
Try looking in the Effects & Presets pallet instead:

Attachments don't appear in web mail

Word documents or PDF files sent to me by email don't appear - are not visible - when I access my web mail using Firefox 4.0b1. However, the message size indicates that the attachment is there somewhere; e.g., a short message has a size of > 100 mb.
== This happened ==
A few times a week
== I started using the 4.0b1version of Firefox.

If you don’t publish your site to .Mac, these features are unavailable:
Password protection
Blog and photo comments
Blog search
Hit counter
Enhanced slideshows
If you want to have a blog with comments, post this a a new topic and you should get some answers as to what's available.

Audiobooks don't appear in itunes

Hey
The audiobooks I put on my Ipod don't appear on Itunes in the Ipod (they do appear in the library).
Any idea on how this can be fixed? I need to delete some!

In order to see Audiobooks on the Touch you have to click on the More... button on the bottom right after you open Music. Then you'll get a list including Audiobooks, Podcasts, etc. from which you can choose. According to the promotional video for the Touch, you can replace one of the standard icons in Music, e.g., Songs, with Audiobooks or Podcasts so you don't have to click on the More... icon to get to the list.

Images on Robohelp are very poor quality/blurry or don't appear at all

Hello,
Any help on this problem would be greatly appreciated as I have been attempting to solve this for several hours a day for the past week.
I have a simple employee handbook in word (about 20 pages with images) that I’m trying to turn into an html-based document. I've tried a couple if things in order to get this file into robohelp. I've linked the word document to RoboHelp and worked with that, and I've also imported the word doc into framemaker and then linke my framemaker document to Robohelp.
I’ve managed to create the html version with a table of contents doing it both ways, but there are a few images in the word document that turn out really bad in the html version. They look fine in the word document and in pdf version, but when I view them in RoboHelp or in the html version of the document they’re very blurry and choppy. It almost looks as it pixels are missing. I’ve tried everything I could think of but nothing changes the quality of the image. As soon as I link the word document or framemaker document, when I click "view" on the specific image, or just view it from the handbook in Robohelp the image looks terrible.
Someone suggested that I checkmark "do not re-generate image" under project settings but now some of my images aren't appearing at all. All of my images are the same type but I've also tried changing it to png, or bmp, jpeg but nothing changes. They're either blurry or don't appear at all.
Thanks for any help or suggestions!

I don't know if this will help you, but I've had issues with poor image quality when importing Word documents into RH7. I see a fuzziness problem with most images--screen shot or not--but it seems really pronounced if the image in Word is reduced to less than 100%. To resolve this, I've opted to manually copy any Word images to another application (I use SnagIt), save them at 100% to PNG format (JPG and GIFs also work), and import the saved image files to Robohelp. That sounds like that's what you ended up doing with Photoshop.
Also, I wonder if it makes a difference how much the text was magnified/reduced when they took the original screen shots. I just did an experiment--using SnagIt, I took a screen capture of a block of text at 100% magnification. I then pasted the screen shot directly from SnagIt into my Robohelp document. It came in perfectly clean--couldn't see any obvious difference between the Robohelp text and the image of the Word text. I got the same results when I saved the screen capture to a PNG file and imported it that way. That leads me to believe the problem you're seeing is a result of having Word images automatically converted to RH.
(In the example--unfortunately hard to see-- the text in the red box is from a screen capture; the rest of the text was entered in RH8--there's no discernable difference in quality.)

I start the computer the screen has blue vertical stripes and says that the Adobe Air application can not be found. Some of my programs don't run and say: You: Error access violation at 0x0055F525

I start the computer the screen has blue vertical stripes and says that the Adobe Air application can not be found. Some of my programs don't run and say:
You: Error access violation at 0x0055F525. I reinstalled Adobe Air. No change. I went to the Adobe webside and they said to repair it with a program. I bought RegCure. Didn't change anything. What to do?

Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time.

Some of my extensions don't appear on my toolbar or anywhere.

Similar Messages

Maybe you are looking for