"Some of the items were not copied/file not found..." when syncing

Every since about a month or so ago, everytime I connect my iPod (or iPhone) to itunes, it does the auto-sync, and after every sync, I keep getting the message:
"Some of the items in the itunes library, including ..., were not copied because they could not be found"
This started out with about 10 'errors' and now today, there were 46 total problems (songs). I have done absolutely nothing to delete any of these songs. When I look in my itunes library, there is now an " ! " to the left of the song, and if I click and try to play the song it says the original file could not be found. This is happening to more and more of my songs, pretty soon I'm not going to have a library left! Any ideas? Thanks a lot!
Sarah

I have had the same problem. Although I accept that performing the remedy suggested helps in the short term I fail to see how that addresses the underlying problem. I have a new 80GB 5th Generation iPod. I have over 6000 pieces on it and initially I had 4-5 items that wouldn't syn even though they were both on the iPod and the HD of the computer. I corrected the items as suggested and then a few days later like you I had over 100items not syncing. Not only will it take over an hour to manually find the so-called missing files and replace them but I'm concerned that in a week's time it will be a different hundred. Any other suggestions.
The missing files can all still be found in iTunes Library but for some reason the software is not opening them. Any further guidance or help would be greatly appreciated.
I'm using a new PC laptop with a Seagate 500GB hard drive for my iTunes
Sophs

Similar Messages

3GS Error Message: Some of the items were not copied. Error -50.

Here are the details:
Trying to sync iPhone 3GS running IOS 4.1 with iTunes 10.0.1. on SL 10.6.4.
The error message I get is:
"Some of the items in the iTunes library, including "Nostradormouse {and 6 other iBooks}", were not copied to the iPhone "sgunes's iPhone" because you are not authorized for them on this computer." And then it states to authorize this computer.
I then authorize it and get the "We could not complete your iTunes Store request. An unknown error occurred (-50). The was an error in the iTunes Store. Please try again later."
No matter how often I try I get the same error message.
When I try to update free app updates I get the same error:
"Could not purchase"". An unknown error occurred (-50).
There was an error in the iTunes Store. Please try again later.
Apple Tech support was clueless.
Message was edited by: sgunes
Message was edited by: sgunes

Try playing one of the problem tracks in iTunes. If it is not authorized, iTunes should invite you to do so.
Tracks will not transfer to your iPod if they are not authorized.
If you have trouble getting your tracks authorized, there is an Apple help that includes a email form for contacting Customer Service:
http://www.apple.com/support/itunes/store/authorization/

Syncing Fails with iPod Video - Some of the items were not copied

When I try to sync my iPod Video, I get this message displayed in iTunes 7.5:
"Some of the items in the iTunes Library, including "NPR ...." were not copied because they could not be found".
Well I don't even see these two podcasts in question listed in my Itunes Podcasts List. To make matters worse, the two particular NPR podcasts are no longer being listed for download by iTunes.
Is my ITunes Library corrupt?
Do I need to rebuild my iTunes Library (via the instructions at http://support.apple.com/kb/HT1451 )?

I rebuilt the Itunes Library using these instructions --
http://support.apple.com/kb/HT1451
That fixed the problem. The only thing it does not tell you is that you must re-subscribe to all your podcasts.

I created a 5x7 postcard document in Word with text boxes and graphics. When I converted it to PDF, some of the items were missing, even though they were in the boundaries of the page and looked fine on the Word document. What happened, and how do I fix

I created a 5x7 postcard document in Word with text boxes and graphics. When I converted it to PDF, some of the items were missing, even though they were in the boundaries of the page and looked fine on the Word document. What happened, and how do I fix it? I'm trying to upload the PDF version to Vistaprint. Thanks.

Reader doesn’t create pdf files. You can use Acrobat (ask in that forum) to create pdfs. You can subscribe to the Adobe PDF Pack which has a create pdf functionality (please ask in that forum), or you can use a third party utility such as ghostscript, cutepdf, or Microsoft’s own PDF creation capability. For third party pdf creation you will need to ask in a forum dedicated to that software as fellow users of Reader are unlikely to have the knowledge to help.

The operation can't be completed because you don't have permission to access some of the items. ive moved these files from my sd card to the trash, when i take out the sd card the trash empties but then fills up when i put it back in, it wont empty.

The operation can’t be completed because you don’t have permission to access some of the items. ive moved these files from my sd card to the trash, when i take out the sd card the trash empties but then fills up when i put it back in, it wont empty.

In the Finder, press the key combination shift-command-C, or select
Go ▹ Computer
from the menu bar. A window will open showing all mounted volumes. Select the one in question and open the Info window. What is shown as the Format in the General section?

I bought and downloaded a few song on iTunes. Now I see that some of the songs were not completely downloaded and stops a few seconds into the song. I went back to the album but it does not give me an option to re-download. What do I do so that I can down

I bought and downloaded a few song on iTunes. Now I see that some of the songs were not completely downloaded and stops a few seconds into the song. I went back to the album but it does not give me an option to re-download. What do I do so that I can down

Just found the answer - if you have the sam problem look here for the answer:
https://discussions.apple.com/thread/5769424?tstart=0

BW: The following objects were not found when accessing server

Hi All,
Problem:
- on the infoprovider, no authorization object is flagged as authorization relevant
When trying to open the query in display mode, I get the message "The following objects were not found when accessing server", when I press cancel, the attributes are not available in the query.
I tested with authorization objects and the only way to get these attributes visible is to put them in an authorization object with full (*) authorization for the field.
Why does the system checks this? Because I don't want to give full authorization.
Is there a way to unable this check, as I want the attributes to be visible (also without the *)
+
When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
What can I do to get them visibIe in the output?
I can not create an authorization object for each of these attributes with * (full authorization)... as it is not logic, and no authorization should need to be checked...
Anyone who faced the same problem?
(>> it seems the system acts as if the attributes are keyfigures, for which you need * authorization to be visisble)
The attributes are navigational attributes.
Thanks for your reply

Hi Shivraj,
BW 3.5 version
Thanks

The following objects were not found when accessing server

Hi All,
Problem:
- on the infoprovider, no authorization object is flagged as authorization relevant
When trying to open the query in display mode, I get the message "The following objects were not found when accessing server", when I press cancel, the attributes are not available in the query.
I tested with authorization objects and the only way to get these attributes visible is to put them in an authorization object with full (*) authorization for the field.
Why does the system checks this? Because I don't want to give full authorization.
Is there a way to unable this check, as I want the attributes to be visible (also without the *)
Can anyone help me with this? Thanks in advance for your reply

When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
What can I do to get them visibIe in the output?
I can not create an authorization object for each of these attributes with * (full authorization)... as it is not logic, and no authorization should need to be checked...
Anyone who faced the same problem?
(>> it seems the system acts as if the attributes are keyfigures, for which you need * authorization to be visisble)
The attributes are navigational attributes.

"EA02 The item is not found in the container portion of the"

GW2012 (on the OES2).
One of users can't open the accepted letter in gwwebaccess.
In attempt to open the received letter receives a mistake:
[EA02] The item is not found in the container portion of the uid.
Additional information:
1) the "mailbox" folder empty, at work in gwwebaccess.
But if to work in WIndows GW Clients - in the "Mailbox" folder the received letters are visible and accesible.
2) In the gwwebaccess visible recieved mail in the "Unopened Items" folder ! . But when open mail from this folder - have error:
[EA02] The item is not found in the container portion of the uid.
All this only for the user: amuzchil.
Before upgrade from GW8 -> gw2012 all was ok for amuzchil.
Repair, Rebuild, Recreate mailbox "amuzchil" - don`t help. ;(
Please, help me.
Serg

Originally Posted by Michael Bell
On 5/14/2012 11:16 AM, skoltogyan wrote:
>
> GW2012 (on the OES2).
>
> One of users can't open the accepted letter in gwwebaccess.
> In attempt to open the received letter receives a mistake:
> [EA02] The item is not found in the container portion of the uid.
>
> Additional information:
> 1) the "mailbox" folder empty, at work in gwwebaccess.
> But if to work in WIndows GW Clients - in the "Mailbox" folder the
> received letters are visible and accesible.
> 2) In the gwwebaccess visible recieved mail in the "Unopened Items"
> folder ! . But when open mail from this folder - have error:
> [EA02] The item is not found in the container portion of the uid.
>
> All this only for the user: amuzchil.
>
> Before upgrade from GW8 -> gw2012 all was ok for amuzchil.
>
> Repair, Rebuild, Recreate mailbox "amuzchil" - don`t help. ;(
>
>
> Please, help me.
>
> Serg
>
>
That's going to be a soap item corruption issue. You're going to have to
open an SR. Turn on SOAP tracing at the poa and try to trace the issue.
Problem Resolved.
The user created the additional folder: "mailbox" under "Cabinet"-folder.
After removal of this folder everything began to work.
Serg

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

HT1296 iphone not found when syncing?

Iphone not found when syncing? How do you fix?

Have you tried this?
Turn your device off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your device and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a device in recovery mode. Now you can restore to factory settings.

Some tunes not found when sync?

I am unable to tranfer some songs from itune playlists to my white iphone4, I keep getting the message that some tracks were not found.
I also have a black iphone4, and all sync works well,
I am using the same computer for both phones,
Any ideas???
Thanks

Have you been through these steps?
http://docs.info.apple.com/article.html?artnum=93014

While installing the linux oracle some of the packages were not be installed.. Especially ihe .i686 file

At the time of database installation the given packages are can't be installed..
libfreebl3.so(NSSRAWHASH_3.12.3) is needed by glibc-2.17-78.0.1.el7.i686,
libstdc++-devel-4.8.2-3.el7.i686
libXtst-1.2.2-1.el7.i686
At the installation time the output will be " failed dependencies"

Hi,
It is easy to us to help you faster and with best recommendations by putting the Linux Server version and the Oracle database version.
If you have an Oracle Linux 5, you can install the package oracle-validated and If you have Oracle Linux 6, you can install the package oracle-rdbms-server-11gR2-preinstall, So these packages will install ALL Packages dependency that one Oracle database needs.
Best regards.

IDVD shows shaky "Ticker " Titles once the Movie has been burned but the Titles were not shaky when making the video in iMovie . Any thoughts please .

I make a lot of video's in iMovie but in the latest I have included some "Ticker " Titles that run smoothly when in iMovie but when I burn to disc with iDVD the Ticker Titles run but are shaky .This is the first time I have come across this after owning my iMac for 5 years so I am not sure if this is something new since updating which I do always when new updates come out . When I use a stationary Title there are no problems but the moving title does add a bit of class to the video.
I always rave about my iMac and loathe to tell the guy's I have a small issue .

Was your workflow similar to this recommended workflow?
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If not try using it and test the disk in both DVD players.

Why won't Firefox 6 transfer to app folder, says I don't have sufficient privileges for some of the items?

I've tried to download the most current Firefox and it downloaded but I can't save it to my apps or use it due to this error message:
"The operation cannot be completed because you do not have sufficient privileges for some of the items." Not sure what to do now?

Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For Mac OS X 10.4.11 or Mac OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html

"Some of the items were not copied/file not found..." when syncing

Similar Messages

Maybe you are looking for