Some of the machines are not installing windows updates in SCCM 2012 SP1

I have deployed the current month patches to the machines. But, some of the machines are failed to install.
Most commonly I am getting the below errors in windowsupdate.log ,
Report REPORT EVENT: {811D3FE5-A254-4C7E-B7F1-6132320AD5E0}
2015-02-23 08:18:40:851-0000 1
148 101
{00000000-0000-0000-0000-000000000000}
0 80072ee2
CcmExec Failure
Software Synchronization Windows Update Client failed to detect with error 0x80072ee2.
::OnScanComplete -Scan Failed with Error=0x80072f78
How to resolve this issue with installing windows updates?
0x80072ee2 looks like time out error.

I have uploaded the log file on dropbox
https://www.dropbox.com/s/bt09vpyhab56dgs/WindowsUpdate%20log.txt?dl=0
I am going to check WSUS IIS log file. I will keep you posted with my findings.
I dont know how to confirm whether the client is talking with wsus server or not. But, I could see some more errors in softwareupdates related logs,
Below is the error in updatestore.log,
Failed to refresh Resync state message. Error = 0x87d00310.
Below are the errors in update deployment.log,
Job error (0x80072ee2) received for assignment ({1566B12B-1731-479D-BFD1-98F2D24346B2}) action - Update Deployment
Job error (0x80072ee2) received for assignment ({1566B12B-1731-479D-BFD1-98F2D24346B2}) action
Updates will not be made available

Similar Messages

When printing Gantt chart, some of the bars are not appearing in it

When printing Gantt chart, some of the bars are not appearing in it
I have added print tag in xml of chart mode-multiple pages.
<print mode="MultiPage" print_all_columns="true" />
For printing, I right ckicked on chart and clicked on Print chart..
Edited by: Sheetal on Mar 29, 2012 2:46 AM
Edited by: Sheetal on Mar 29, 2012 2:51 AM
Edited by: Sheetal on Mar 29, 2012 2:56 AM

Sheetal,
Did you ever find a reason as to why the bars were not printing? I'm experiencing the same problem with Apex 4.1.1. Only the first part prints. Here is the print tag:
<print mode="MultiPage" print_all_columns="true" columns_on_every_page="2" fit_timescale_to_end_of_page="false">
I've changed some of these settings to no avail.
-Seth.

I have tried installing Livetype 3 times and the Effects are not installed.

I have tried installing Livetype 3 times and the Effects are not installed. The animated text behaviors are not available. What might I be doing wrong?

I have tried installing Livetype 3 times and the
Effects are not installed. The animated text
behaviors are not available. What might I be doing
wrong?
I have the exact same problem! I sent the discs into my local Apple Center so they could check the discs. A month later I get them back by mail and an e-mail that says "there is no problem with the discs, therefore it must be a problem with you system". Not very helpful, and it took forever before they got time to check the discs. Pretty ****** off by now...
EDIT: It is probably worth mentioning that I get an error when installing LiveType 1B at about 4% of installing, that says "there were errors installing, please try again". I am installing the LiveType content on my LaCie 250GB USB external hard drive, although I have already tried installing the content on the built in hard drive as well..
Message was edited by: NitRam Den Gale

I upgraded to ISO 7. Some of the apps are not w orking properly. Example: Text is to large and cannot fit the screen and cannot be reduced. Other apps will no longer rotate. Need a fix.

I upgraded my I pad to ISO 7. Some of the APPS are not working properly. Example: The text is to large for the screen and cannot be adjusted. Other Apps will no longer rotate. Is there a fix?

Have you updated your apps?
I have found that the rotation from portrait to landscape is broken on some apps. That's not iOS 7's fault, it's the App designer. I have a fairly popular app that got updated the day before iOS 7 came out, presumably it was iOS 7 friendly. But no, it doesn't do landscape. Completely incompetent App designers to make that egregious of an error.
You can contact the designer of each of your apps. It's not Apple's problem.

HT4059 I bought an ibook and some of the pages are not visible because of encoding errors. What does this mean?

I bought an ibook and some of the pages are not visible and show and error message that there is an encoding error. Can you help?

There are numerous thread about the same matter in this forum
I hope you'll find your answer
https://discussions.apple.com/search.jspa?resultTypes=&dateRange=all&peopleEnabl ed=true&q=the+format+is+not+valid&containerType=14&container=2084&username=&rank By=relevance&numResults=15

Trouble Deploying Windows updates via SCCM 2012

Hello
I'm testing Windows updates via SCCM 2012 - I have successfully deployed updates to 4 test PC's.
I then added another 15 Test PC's into the same group - Not one of them receive updates (they're all within the same Domain and even in the same room)
I reviewed "UpdatesDeployment.log -
1. I highlighted some points that stood out to me
2. I have the Maintenance window set to 24hours for this test
From the Server side and Clients side - What are the best .logs to look at.
CUpdateAssignmentsManager received a SERVICEWINDOWEVENT START Event   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
Suspend activity in presentation mode is selected   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
At least one user has elected to suspend non-business hours activity when in presentation mode. Checking for presentation mode.   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
Proceeding to non-business hours activites as presentation mode is off.   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
Auto install during non-business hours is disabled or never set, selecting only scheduled updates.   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
A user-defined service window(non-business hours) is available. We will attempt to install any scheduled updates.   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
Attempting to install 0 updates   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
No actionable updates for install task. No attempt required.   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
Updates could not be installed at this time. Waiting for the next maintenance window.   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)

Hi,
You could also check Windowsupdate.log on the client.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Ccmcache folder and windows update in sccm 2012

I was looking for a folder that have large size in my c drive .soddenly I've found ccmchache folder with 5GB .I change the cache size on clients nicely to 500 MB.
but after a week that sccm wanted to install update on clients I faced with too many updates about 50 Updates that should be installed .I let them install .after restarting windows I saw some of the Update hasn't be installed .
on the other hand some of updates that I had defined to be required to install and I expect them install automatically But some of them become an available update and waiting for user approve to install .
whats the solution .?please .

I am not getting what are you asking for. You said ,the ccmcache size changed from 5GB to 500MB ? do you think will that be enough to have content downloaded to ccmcache before they install ? why did you change the cache size to lower level ?
If the patches are not installed or failed to do,you can look at software update logs on the client like wuahander.log,updatestore.log,updatedeployment.log and windowsupdate.log for further troubleshooting.
Logs can only help you what went wrong during patch installation.
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr

System task 'policyevaluator_unlock ' returned error code 0x8000fff in windows pacth deployment on windows 7 by sccm 2012 Sp1

hi All,
I have faced mentioned error in Win7's ccmexec.log file doing windows pacth deployment on windows 7 by sccm 2012 Sp1
system task 'policyevaluator_unlock ' returned error code 0x8000fff
Kirpal Singh

Thanks for reporting this symptom. We investigated and found that this error occurs when user unlocks the workstation. Due to this error, ccmexec service doesn’t request for user required policies when user
unlocks the workstation. We will investigate and address this symptom. Other than user unlock, all other user policy scenarios will be functioning as expected. The client will process user policies when user logs on as well as in the regular user policy polling
schedule”.
BC

I'm editing a video in imovie '08 and adding iphotos to the movie, but some of the photos are not showing. Help

I'm editing the video of a presentation one of my clients has delivered, I'm adding the slides of the presentation in as photos from iphoto, the problem is that some of the photos are now showing up in the video even though they have been added. Also where photo number 7 should be it is showing photo number 12? I really need to sort this out and need help. How do I get the photos to show and show properly in the right place?
Thank you in advance

I've got a list of things to look at and tryout to see if we can narrow down what's happening. Try any one in any particular order see if the problem keeps happening.
1. What format are the original photos in?
Are the all the same?
If they are different, do some work and others do not?
File formats that are “raw” may be a problem.
File size may also be a problem if they are very large files.
2. Duplicate the project in the Project Library
Try dragging a photo into that copy of the project
Any differences? If you can import photos into the Duplicate, try copying then pasting into the original and see if the image shows up.
3. Duplicate a picture inside of iPhoto
If you want to have a particular picture and can find it within iPhoto try making a duplicate.
Does it show up in the Photo browser? And can you drag that duplicated picture into the project? What do you see, what result do you get?
4. Clean the iMovie cache
Quit out of iMovie. Then go to your Movies Folder > iMovie Events > Project folder name
Drag the folder "iMovie Thumbnails" to your trash. Then open the folder "iMovie Cache" and drag the file "Cache.plist" to the trash.
This should regenerate any cached thumbnails for the project, may be helpful.
5. Try tossing out the iMovie preferences
Quit iMovie.
Open a Finder window to your user's Home folder>Library >Preferences folder. Find the file named "com.apple.iMovie.plist" or "com.apple.iMovieAppl.plist" and move it to the trash.
Try opening iMovie again, then opening the project and dragging a photo from the Photo Browser into the Project timeline.

HT203200 I purchased an album on itunes and some of the songs are not complete

I have purchased many songs on itunes and never had problems. Recently I purchased an album and even though the downloads are complete and nothing unusual or any problems happened while it was downloading, the songs are not complete. The album plays on my itunes, but each song gets cut off after a minute or two. Is there a way I can redownload the album without having to purchase it again?

Welcome to the Apple Community.
Try deleting the problematic tune (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

How to install Windows Updates on a 2012 Domain Controller w/Group Policy Settings

Hello All,
I'm having an issue installing Windows Updates on my Windows Server 2012 Standard with AD DS role, acting as a backup DC.
I have Group Policies setup for the Domain Controllers to download updates from my WSUS server but not to install them. When I go to my Windows Server 2003 R2 Domain Controller, I can install updates via the "Install Updates and Shutdown". That
option doesn't show up on the 2012 server. I can see from my WSUS server and the event viewer that the updates are being downloaded to the 2012 server........just no option for me to install the updates.
Am I just missing something or will I need to change the way my Group Policy is setup to allow installs and/or downloads? Any help would be greatly appreciated!
Tony

So I've totally removed the GPO settings for configuring updates on the Default Domain Controllers OU and I can get the Windows Server 2003 Server to get updates from Windows Updates, but the 2012 Server still won't show me how to download or install any
updates. It just states on the log-in screen that there are "Windows Updates Sign in and install important updates".
Well guess what Microsoft! I've signed in and still don't see where I can install updates!!!
I guess because you've set AU=3.
There doesn't seem to be much documented in depth about AU/WUAgent (not in the history of forever), but Lawrence and others in the WSUS forum do cover a lot of related question about the agent and also GP settings.
Lawrence has blogged a lot of detail about the registry settings which are available for AU/WU, and how some of those settings are not practically of any use since WinXP.
So, even though your question isn't about WSUS, the WSUS forum is a great place to visit for help for WUAgent etc.
Anyway, "where can I install updates?" :
on the Start screen, Search for "Windows Update"
or
Settings charm
Change PC Settings
Update and Recovery
Windows Update
or
Control Panel\System and Security\Windows Update
Some further (light) discussion on the "new" behaviour:
http://blogs.msdn.com/b/b8/archive/2011/11/14/minimizing-restarts-after-automatic-updating-in-windows-update.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Sccm Agent will not install via push on SCCM 2012 to computers that have sccm 2007 agents

I can not install the sccm 2012 agent on client computers via the push method or selecting the computers in a collection and clicking on install client nothing happens on the clients.
Also another problem is when i install the clients manually on the machines there is no site code and i can not "find site"
in both cases teh machines did have the sccm 2007 agent and were working fine on that.

1.make sure you have created the boundary group first. if you cant push the agent via push method, check the log files.
2. also make sure that in your environment if you have a firewall then there are port need to be open for agent push.
3. also if you have installed MacAfee agent on your client machine make sure the policies are not blocking file and print sharing.
4. also the windows firewall need to open for file and print sharing of you are using push method.
did you try to push the agent via GPO?
IF not try to run the following script in one of the client machine. use this command in the command prompt.
in my case smssitecode is BLL
MP is the management point.
ccmsetup.exe SMSSITECODE=BLL /mp:sccmserver.contoso.com /source:\\sccmserver.contoso.com\sms_bll\client
run the above command in the command prompt of one of the client machine which you cant install the agent and see.

CCMSETUP not updating on SCCM 2012 SP1 CU3/CU4 primary site

I have a SCCM 2012 SP1 CU3 primary site and i can't upgrade the local installed SCCM Client.
The error I get in ccmsetup.log is:
<![LOG[MSI: Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002]LOG]!><time="15:44:22.408-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:300">
<![LOG[MSI: Action 15:44:22: Rollback. Rolling back action:]LOG]!><time="15:44:22.562-60" date="02-08-2014" component="ccmsetup" context="" type="0" thread="2496" file="msiutil.cpp:314">
<![LOG[File C:\windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text: ExitCode: 1603
Action: CcmRegisterHostingConfiguration.
ErrorMessages:
Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002
]LOG]!><time="15:45:00.798-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:872">
<![LOG[Client installation has failed too many times. Ccmsetup will now abort.]LOG]!><time="15:45:00.830-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7941">
<![LOG[Successfully deleted the ccmsetup service]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2496" file="ccmsetup.cpp:3320">
<![LOG[InstallFromManifest failed 0x80070643]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7086">
<![LOG[CcmSetup failed with error code 0x80070643]LOG]!><time="15:45:05.832-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2324" file="ccmsetup.cpp:10544">
I have this on my primary and secondary servers as well.
Is upgrading to R2 recommended and will that solve this issue ?
When googling to this issue i found that there is a solution for this: remove MP, upgrade Client, install MP.
But this is my primary and secondary and on secondary i am not allowed to remove the MP. It is hardcoded enabled.

Try the following steps to specify the hotfix when installing the client.
1. Open an elevated command prompt.
2. Run a command line similar to the following – if CU3 has already been installed, the MSP file below should be on the site server, in the
\\servername\SMS_SITE\Client\hotfix folder:
\ccmsetup.exe PATCH=\Configmgr2012ac-sp1-kb2882125-x64.msp
Juke Chou
TechNet Community Support

Hardware inventory not reflecting in reports in SCCM 2012 SP1

Hi,
I am using SCCM 2012 SP1. During hardware inventory my client sending logs to MP server(i checked in InventoryAgent.log).
From server end its also showing successful in logs (MP_Hinv.log). But when i m using resource explorer by clicking on a particular device its not giving information about inventory. Its giving only three option (Kindly refer snapshot).
Kindly suggest .
Regards
Manish

We're just not wanting to lead anyone else astray into thinking that this really is the solution if they were to run into the same scenario. We're all very happy that you have things working now, but were just trying to really understand how it got fixed
so that others who do come across this thread would see the real answer. But if all you changed was the boundary group, so be it.
Again, we're all glad you are working now.
Wally Mead

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
Thank you.

You're welcome
Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

Some of the machines are not installing windows updates in SCCM 2012 SP1

Similar Messages

Maybe you are looking for