Some of the the type layers in this document were rasterized

We have Adobe Photoshop CS4 Extended.
Recently one of the documents we created came up with this error:
Some of the the type layers in this document were rasterized because an error prevented them from being read.
We aren't using any fancy font in the document, just Lucida Sans
I found one discussion with a similar issue that was caused by the Suitcase Fusion 3 add-on, and resolved when they updated that add-on. However, we do not have said add-on activated in our Photoshop.
Can anyone help us figure out what happened so we won't run across this problem again?
Zane B Stein

I still haven't received a reply on this forum, over a year later.
We ended up redoing the document again from scratch.
We just received the error again with a new document, this time a much more time-consuming document to set up. The only font however is Arial.
We have Windows 7, 32-bit, Adobe Photoshop CS4 Extended, all adobe products on the computer have the latest update.
What can we do to avoid the error, "
Some of the the type layers in this document were rasterized because an error prevented them from being read."?
Zane

Similar Messages

Some of the layers in this document were rasterized because an error ...

Using Mac CS4 PS, I have recently begun getting this error:
Some of the layers in this document were rasterized because an error ...
Quitting and restarting PS seems to fix it.
It happens with random files,
Anyone else seen this problem and know what is causing it?
The only thing I installed before the problem started was an app named "Smart Review" that is used for proofing within the InSite application.

I can't find an error that matches your text in Photoshop.
But I suspect that you meant "Some of the the type layers in this document were rasterized because an error prevented them from being read.
The fact that they are type layers would be kind of important here.
Are you using the latest version of Photoshop CS4 (11.0.2)?
What font was used on the layers that couldn't be read?
Any chance it's a third party font that might be corrupt?
Have you checked your disk for problems (because normally this just means that the file is corrupt due to disk errors)?

Error with clob column: "No pl/sql translation for the blind type given for this bind variable"

This is reports 11g
I've got a clob column. Reports seems to recognize its type, but if I try to reference it in a format trigger, I get this error at compile time:
"No pl/sql translation for the blind type given for this bind variable"

Actually, Reports is in something better than Forms.
Neither Forms nor Reports do not have "complete" SQL engine (both have only "complete" PL/SQL engine), but have their own SQL parser, which does not understand SQL commands after the database 8.0.
But, in Reports Data Model - SQL Query Statement, we can write "modern" SQL statement (> database 8.0), because Reports sent it directly to the database, without using their own SQL parser.
For example, in Reports Data Model - SQL Query Statement, we can write this (scalar subquery expressions, in bold):
select empno,
       ename,
       deptno,
       (select dname from dept where deptno = emp.deptno) dname
from emp
order by empno;
although scalar subquery expressions was introduced in the database 9.0.1, and in databases 8.0 and 8.1 we should write someting like this:
select emp.empno,
       emp.ename,
       emp.deptno,
       dept.dname
from emp,
       dept
where dept.deptno = emp.deptno
order by empno;
Regards,
Zlatko

How to retrieve the content type used in a document library (C# - Client Model).

Hello,
I need to know if it's possible to retrieve the content type used in a document library, so I can know the columns active and used in this document library. I am using the Client Model in C#.
Thanks

First, retrieve your document library as a List object. Then, use the
List.ContentTypes property to iterate through all the content types assigned to the list.
Blog:
blog.beckybertram.com |
RSS | @beckybertram |
SharePoint 2010: Six-in-One

Attempting to download a wmv file. I keep getting the message: "You cannot save this document with extension ".wmv" at the end of the name. The required extension is ".webarchive" --if I save it this way, i just get a web address rather than the wmv

Attempting to download a wmv file. I keep getting the message: "You cannot save this document with extension “.wmv” at the end of the name. The required extension is “.webarchive” --if I save it this way, i just get a web address rather than the wmv

Find the URL for the WMV, paste it into Safari's address bar, and press the Option and Enter keys.
(66873)

Change the condition type based on sales document type

Dear ALL,
I have created a condition Zxxx which is a fixed calculation type for the documents created by the upload from external tool to SAP. I created this condition because external tool is using a 15 place decimal which SAP doesn't allow and if the normal condition type Zyyy is used SAP calculates once in SAP and there are rounding issues. What the Zxxx condition type does is accept whatever value is sent up from external tool to SAP, regardless of the quantity. The problem is that whenever they create a credit with reference, in SAP and they want to do a partial credit, the Zxxx doesn't take the partial quantity into consideration and doesn't change the value.
Is there a way to force SAP to change the condition type from Zxxx to Zyyy based on sales document type without recalculating the whole document because that would again, cause rounding issues. We would need to have the calculation done only on quantities changed in the credit memo request .
please advice me. your inputs are highly appreciated.
TIA
KOGI

Dear ALL,
someone please help me with this issue. your inputs are higly helpful.
TIA
KOGI

Change the order type for a sales document already created

Hi gurus,
please let me know if there is any possibility for changing the order type for sales document (sales order) already created,
thank you

Hi,
Rambabu is correct. Check the alternate sales document types which your current sales document type is having in VOV8 transaction. You can have the current sales document type replaced with the assigned alternate sales document type 1 or alternate sales document type 2 during run time in the during creation or change mode subject to the current sales order is not having any subsequent document. Re-pricing will happen accordingly and all the things of order will get redetermined.
Hope this explains.

Knowing the Object type? Is this possible?

Can we know the type of the object created ? Is there any method
that lets you know the type of object?
For example:
class Superclass{
class Subclass extends Superclass{
class TestInheritance{
public static void main(String[] args){
Subclass subClass = new Subclass();
}Now,Subclass is of type Subclass and also of type Superclass.
Right?
IS there any way or method I can find out the type of Subclass? ie
Subclass is of type 'Subclass' and 'Superclass'.

These might help:
instanceof operator.
also
Object.getClass().className()
http://java.sun.com/j2se/1.5.0/docs/api/java/lang/Class.html

Is there any way to reset the file type to "Adobe Acrobat Document" rather than "pdf file"?

An update from WordPerfect automatically installed Foxit on my computer without warning me. I uninstalled it and reinstalled CS5 and Acrobat 11 but when I look at a list of files in Windows Explorer, all of my PDF files are simply listed as "PDF file" rather than "Adobe Acrobat Document". I rely on the Adobe name to get my PDF listed at the top of list of files when I sort by document type for something that I need to do 4 or 5 times a day. Having it buried under "PDF" is causing lots of errors.
I've tried searching the registry but can't find anything that would make this change. I know it's related to the computer because when I use my laptop to view the same folder on the desktop, the laptop shows the files as "Adobe Acrobat Document". I just don't know where to look to fix this.
Any help would be very much appreciated.
Thanks,
GiGi

I have already reinstalled both Adobe Reader and the full version of CS5 which includes Adobe Pro. Neither of those steps worked.
Thanks,
GiGi

"...Rasterized type layers..." problem in CS6 extended

I was running CS6 64bit - perpetual licence version - happily. No problems. Then I joined the Adobe subscription service, deactivated and uninstalled CS6. Then I downloaded and installed the CC version of CS6 and updated it. Now when I open any document, or create a new one, I get the following error messager -
"Adobe Photoshop CS6 Extended - Some of the the [sic] type layers in this document were rasterized because an error prevented them from being read".
I can just click "OK" on the message box and all then seems alright. But every time I open an image file - no matter what file format - I get the error message.
Grateful for any ideas. I'll be elevated to Photoshop CC next week but I'd like to get rid of the current CS6 problem before then.
Incidentally, I only managed to update CS6 Extended by uininstalling the old version and installing a fresh online version and then immediately updating using the Application Manager.
Thanks.
AND...
Just discovered that when I try to add text to an image I get the following error message -
"Adobe Photoshop CS6 Extended -Could not complete your request because something prevented the text engine from being initialised"
? Presumably the problems are linked.

Thank you Curt. I was unclear in my first message. I just installed the subscription version over my existing CS6 version. I only uninstalled the downloaded subscription version of CS6 because I was unable to update it (using either the Application Manager or from inside CS6). The update installed ok up to an error message -
"Adobe Photoshop 13.0.1.2 - Installation failed. Error code U44M1P7". Uninstalling CS6 and then reinstalling a downloaded version fresh allowed the update to take place.
As for the problem I was posting about - the text related error messages - I have found the answer I think. The problem is the contents of theTypeSupport folder at username/Appdata/Local/Adobe/ TypeSupport. When I deleted this folder all was fine again - no error messages and text tool working preoperly. When I rebooted the computer after deleting the folder it was recreated with one file missing - which I take to be the culprit. The file was - "AdoneFnt_CommonFonts.lst".
I'll see how things are after CC arrives next week.

Programmatically changing the Control Type of ViewCriteriaItem

Our requirement is dynamically changing the Control Type (Date, LOV, Combo box, etc) of ViewCriteriaItem.
We are trying in the following way,
ViewCriteriaManager vm = view.getViewCriteriaManager();
oracle.jbo.ViewCriteria vca[] = vm.getAllViewCriterias();
oracle.jbo.ViewCriteria vc = vca[0];
vc.removeAllElements();
ViewCriteriaRow vcr = vc.createViewCriteriaRow();
vcr.setAttribute((String)viewItemRow.getAttribute("WvciColumnName"),"");
ViewCriteriaItem vc_item1 = vcr.ensureCriteriaItem((String)viewItemRow.getAttribute("WvciColumnName"));
// Based on some condition
vc_item1.setProperty(ViewCriteriaItem.CONTROL_TYPE, ViewCriteriaItem.ControlType.DATE);
But the control type is not changed in UI?
Kindly help us
Regards,
Vijay

Hi Sonny:
Finally I've solved the problem in Java mapping program, changing the content-type parameter like this:
     public void setParameter(Map mParametro)
          this.mParametro=mParametro;
          if (mParametro==null)
               this.mParametro=new HashMap();
          mParametro.put(StreamTransformationConstants.CONTENT_TYPE, "text/xml");
I hope it helps you. Regards,
Alejandro.

What are the output type and Tcodes?+

What are the output type and Tcodes?

hi,
ex-how to config output type.
You will assign output types using Transaction NACE.
Do the follow steps to assign output type
1)Select Application Type V2 which will have description Shipping.
2)Click on Output types button.
3)Go to change mode by pressing Ctrl+F4.
4)Select one output type which already exists
5)Do Copy As(F6)
6)Give your output type against Output Type field.
7)Under General data Tab, Give Program and Form routine and Save the data.
i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
Check the following documentation
In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
If suppose data can be read from EDI then we should go for condition records.
So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
Go to the Transaction NACE.
choose the related sub module.. like billing or shipping
doubel click on Output Types
Choose the Output Type for which whcih you wanted your script to trigger
Then select the Output Type and double click on Processing Routine
Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
Device Types for SAP Output Devices (Detail Information)
Definition
The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
How do I choose the correct device type?
In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
These standard device types are completely defined and need no modification or extension before you use them in device definitions.
You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
Attributes of a Device Type
A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
regards
siva

How to determine the MIME types of the files?

I'm making an application, in which I've to upload the files to the database. Now I want to insert into the database the MIME type of the files. Now how can I know that which type of the file is having which MIME type?
where can I get the list of all supported MIME types?
Even if I get the list, then every time I update the file in the database, so every time I have to check the file extension and then insert the MIME type...
this seems to be a tedioius job..
Is there any simple way to do this?

I could ask "supported by what?" but I assume you will
be the one supporting them. Here's a link to the
latest list of registered MIME types.HERE's the link...
ftp://ftp.isi.edu/in-notes/iana/assignments/media-types/media-types

How to filter the file type and size when uploadind files into APEX

Hi,
I was wondering how I can do to validate the size of a file, before moving it to my table ? I'd like to filter the file type, but for this one, I think I can use regular expressions in a validation process.
I don't know if there is a way to read the file size even before sending it into the temporary file table.
Thank you
Leinad

Hello Leinad,
AFAIK, you have to create an APEX validation (PL/SQL returns Boolean or Returns error text), which will query the file details from apex_flow_files table. Here you can get filetype and size etc.
So just validate and if any validation fails, then delete the file from apex_flow_files and riase error message.
Regards,
Hari
P.S. Please note that, if there are other apex validations on your page and if they fail, still apex will load the file into apex_flow_files table. So it's good idea to create a validation (PL/SQL) which will fire (condition) when inline validation errors occured. Make sure that this is the LAST validation on your page in sequence. And here you can write code to delete the file from apex_flow_files table.
Edited by: Hari_639 on Sep 20, 2012 10:09 PM

How to update the editor properly after the source types change??

Dear all;
i'm using LLBLgen tools (o/r mapper tools) which helps me to create my BLL layer;
recently i have upgraded from vs 2008 to vs 2013 and i got the following bug :
strange thing i have noticed is that if i tried to make any changes in db and updated it in llbl application then visual studio (after clean and rebuild the solution ) recognize changes only in the code behined editor but in the design editor if i
tried to put gridview control and tried to populate it using LLBLdataSource control then the gridview control load old fields not the new ones
why this problem keep happening in the design editor but fixed in the code behind????
so i tried to post this bug in LLBLgen forums and i got the following response :
" the datasource controls sometimes act weird because vs.net doesn't update the editor properly after the source types change. This is unfortunately a problem related to the ASP.NET tooling for webforms.."
so any idea on how to fix this issue
thanks
Tamer El Morsi

As your issue is related to ASP.NET and web forms, I suggest you visit the Microsoft ASP.NET site (link below) and post in a topical forum there:
http://forums.asp.net/

Some of the the type layers in this document were rasterized

Similar Messages

Maybe you are looking for