Some of Title box when picked and dropped, the iMovie project suddenly disappears

Movie making project with iMovie. :- When some of the Title boxes are picked and dropped at places between frames for different effects, the project suddenly disappears and a drope down window will ask for re opening option. As a result these boxes cannot be put in position and are useless. Is it a spam? Or how to rectify? Please advise. Thanks.

iMovie version 9.
Also I would like to have more softwears installed on my McMini for movie making as the present ones are inadequate. Apple iMovie 11 cannot be installed on this computer. How can I install more reliable softweare.?Kindly advise me.

Similar Messages

  • How do I stop iPhoto from repeatedly closing Event title boxes when I am in the middle of entering a title?

    How do I stop iPhoto from repeatedly closing Event title boxes when I am in the middle of entering a title?
    This problem started several months ago. I have tried typing more slowly and typing faster; neither help.
    It now takes me about four attempts to complete a title of about twelve characters, achieving about three characters on each attempt.
    I am running iPhoto 9.4.3 on OS X 10.8.3 on a 2.93 GHz Intel Quad-Core i7 iMac with 12 GB of DDR3 memory.

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD It does not shoe in p[layback on the computer. I understand there isd some file I need to delete and reboot the imovie to co

    I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD. The digital breakup does not show in playback on the computer. I understand there is a file I need to delete and reboot the computer and imovie will rebuild the file in the program. Help!

    My method is to use the DAW in standard recording mode, and set up the camcorder entirely separately.  After recording, I automate the audio mix with fader moves and effects, then export ("bounce to disk") a full-fidelity AIFF, 16-bit 48 kHz stereo file (most videos use 48, not 44.1).  I use iMovie '11 to import the video from the camera, then import the stereo audio file and match it up to the camera audio by dragging it into the iMovie Project.  Make the waveforms visible, it's not too hard to align.
    Then, use iMovie's "Export as Quicktime" feature.  Here, by going through the menus and options, you can control the audio compression (for example, 256k instead of 128, although 128 seems to be enough for YouTube).
    AppleMan1958 posted a YouTube video about controlling iMovie's export options that may help:
    http://www.youtube.com/watch?feature=player_embedded&v=vJg-909lx2s#!

  • I can't drag and drop the songs around in a playlist I made

    I just made a new playlist and for some reason I can't drag and drop the songs around to change the order. I have two other playlists and I can drag and drop the songs in those playlists just fine. How can I fix this?

    Select the first column before the track title.

  • When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the test and change the font, it does not change it properly?

    When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the text and change the font, it does not change it properly? This is making it impossible to amend.

    Hi Janedance1,
    If the PDF that you converted already has searchable text, please try disabling OCR as described in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel. (If the PDF was created from a scanned document and doesn't already have searchable text, disabling OCR isn't a great option, as the text won't be searchable/editable in the converted Word doc.)
    Please let us know how it goes.
    Best,
    Sara

  • After sorting photos into albums, the albums disappeared on me. I dragged and dropped the photos and went back to check that they were in place before exiting the program. When I went back, the folder was there but no albums. Help!

    Working on an IMac - with IPhoto v.9.6 
    This is my first experience with IPhoto... trying to move files from a PC over to a Mac.
    I don't have a ton of photos but I created about 6 albums - standard albums - and dragged and dropped individual photos into each of the albums. I named each of the albums as well so I would know what was in each. After i was finished, I created a folder called 2014 and moved each of the albums into that folder. Before moving ANY of the albums, I opened each of them up to make sure that all the photos I wanted in each were indeed there - and since there were some errors on my part, I deleted any duplicates first. SO, I KNOW the photos were actually in each of the albums BEFORE i moved them into the 2014 folder.
    My intention was to then delete the photo files in my document file but once I got there I thought I would go back and double check the IPhoto file just to make sure... and the pictures were NOT in the albums where I had placed them... is there a need to save this before you move on and if so, to where and how? I was under the impression that once files were moved to albums, they remain there.
    The photos are still in the photo library but unsorted now again... I cannot even open the 2014 folder at this point.
    Thanks for any help!!

    Was back on IPhoto this morning. The folder did not open at all so I deleted it. Beside Albums, nothing showed at all. It was like I had done no work at all except to import my photo folder. Nothing was in my trash bin either.
    I started again and created one album at a time. I dragged and dropped photos into the album and exited out of IPhoto, opened up other programs and then returned to IPhoto to see if the album was still there and it was this time. I created a second album and did the same thing. This time, for some reason, the albums seem to be staying in place. I am not doing anything differently than last time. After creating three albums, I created a folder called 2014 and dragged and dropped the three albums into the folder and exited IPhoto. They were still there when I returned - YEAH! It seems to be working - for now! I am keeping my fingers crossed that my photos are not going to disappear but I am not going to delete my photo folder from my files just in case!
    Thanks for the suggestions but this may just have been a funny glitch... not sure what happened. I didn't change anything or do anything differently this time except that I am doing it one album at a time and exiting the program between creating each of them and coming back to check... very strange.

  • I need to play a song on a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through the whole presentation ? Thanks.

    I need to play a song in a row in a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through out the presentation ?
    Thanks.

    Drag the file into the audio window in the Document inspector...

  • How to quickly pick up a 2nd call and drop the first call

    If I am on a phone call, and then a second call comes in, then how can I quickly pick up the second call and DROP the first call?  I can do it if I put the first call on hold but then I have two calls going.  If I simply END the first call, then it takes 5 or 6 seconds for the second call to come in.  Several times I have lost the second call because it took too long to transition over. 

    never mind i did a direct chat with a skype rep and got my answer which is no.

  • Media not copying into event when drag and dropped

    When I add media files into an event by dragging and dropping the file into the project the file does not get moved/copied 'Macintosh's HD Projects' folder.
    Is there a setting somewhere I can change so dragging and dropping behaves the same way as when I use CMD+I to import a file?
    I am using the most up-to-date version of FCPX in Mavericks.

    How are you determining this? And what version are you using? Media doesn't get copied to project folders; it get copied to Original Media sub folders in event folders. Or it gets left in its original location with aliases pointing to the actual media.
    If you're using 10.1, try dragging to the single-star event icon in the Library list pane and then look inside Original Media..
    Russ

  • When i plug my ipod shuffle 4th generation in a box pops up and says the right files for this ipod isnt on the system?? sooo i re downloaded itunes and it still doesnt work soo i deleted it all and eredownloaded itunes all up to date and it still doesnt !

    when i plug my ipod shuffle 4th generation in a box pops up and says the right files for this ipod isnt on the system?? sooo i re downloaded itunes and it still doesnt work soo i deleted it all and eredownloaded itunes all up to date and it still doesnt ! any help please

    What was the exact error message you received?  When you removed and re-installed iTunes, did you use the precise instructions in this Apple support document to walk you through the process?
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    B-rock

  • When drag and dropping a page to a separate folder the default name is "Untitled Extract Pages.pdf", how do I change this to other default name?

    Hi,
    When drag and dropping a page to a separate folder the default name is "Untitled Extract Pages.pdf", how do I change this to other default name?
    Thanks for any reply that can help!
    BR
    /H

    I don't think you can change it.

  • Are there any events to script a component when dragged and dropped into the parsys area?

    are there any events to script a component when dragged and dropped into the parsys area?

    The cq:listeners node of a component's cq:EditConfig has a number of events that fire with relation to the edit mode drag'n'drop stuff. You would probably want to hook one or more of the insert ones (beforeinsert, beforechildinsert, afterinsert, afterchildinsert).

  • Mail doesn't attach files through dragging and dropping the files!

    Help please,
    Mail doesn't attach files through dragging and dropping the files on OS X ML, it crashes for a while !!

    Open Disk Utility and Repair disk permissions on the First Aid tab.
    Then, Restart and boot into Recovery Mode by holding down cmd-r on restart until you see a gray screen. When the Mac boots, you will be presented with some options. Choose Disk Utility and select your Hard drive volume (Macintosh HD is the default name). Then, on the First Aid tab, click Repair Disk (not permissions).
    If that doesn't help, you could try installing the 10.8.2 combo updater from the Apple Downloads site:
    http://support.apple.com/kb/DL1581

  • I have been trying to save a document in illustrator and every time I try to, a dialog box pops up and says the following- Can't save the illustration. You do not have enough access privileges. id: -5000....This has been happening ever since I switched to

    I have been trying to save a document in illustrator and every time I try to, a dialog box pops up and says the following- Can't save the illustration. You do not have enough access privileges. id: -5000....This has been happening ever since I switched to CC and whenever I try to save something in indesign, I get a dialog box that says that my file is corrupt. How do I fix this? I cannot get any work done !!!

    You should ask in Illustrator
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Why can I no longer drag and drop in iMovie 11?

    Why can I no longer drag and drop in iMovie 11? This means I can't select transitions, titles, or even move clips within the project. Never had this problem before.

    Serious bugs in iM 11 with numerous lock-ups and crashes.  I shouldn't have upgraded -- now I'm pulling out my hair trying to complete a video project with it.
    Apple is losing their way.

Maybe you are looking for

  • Not authorized  in the Enterprise Portal

    Hi, I have a problem setting up the portal. When browsing to the User Administration tab I get: "You are not authorized to access this application; contact your system administrator". I'm logged on as J2EE_ADMIN. Should I log on as another user? Is t

  • "Loading iTunes Match" showing each time I start Music

    Hi, I've recently had some trouble with iTunes match, where it wasn't downloading songs, although I could stream them fine. I spoke to someone from Apple who suggested turning off iTunes Match, then do a 'Reset All Settings', then re-enable iTunes Ma

  • Macbook pro Graphic card failure

    I have a Macbook pro 15 inch MB 134 model. I had the classical black screen problem which i taught that it was the NVidia graphic card failure after reading the symptoms on apple support page. However, as usual, the apple authorised service center de

  • [Solved] Spanish characters not read on NTFS hard drive

    Hi there, Every time I mount my NTFS hard drive with the windows partition on it, I can't read the file names properly. Instead of á, é, í, ó and ú it introduces boxes or interrogation signs. Any idea why that may be? Last edited by Zespris (2008-11-

  • SAP Query Display data from 2 internal tables

    Hi ABAP Gurus, I am developing a SAP Query. I have created an infoset with the custom infotype 9050 and added the table ZPA9050 into the Infoset. How do I input values to the ZPA9050 fields? A checkbox for making a Selection field is not available in