Some Oracle Reports Timing Out

I have a report that sometimes times out and sometimes runs. Related to activity on the database when the report is run. Where can I modify the timeout parameter? I was going to change it in the Application Server Control on the Administration Page for the HTTP Server. Is this correct? Default is set to 300 seconds. Just looking for advice on where to set this?
Thanks for your assistance.

You may check "job" attribute in report server configuration file. i.e. $ORACLE_HOME/reports/conf/<repserver>.conf, where <repserver> stands for the name of the report server).
Try changing
<job jobType="report" engineId="rwEng"/>
to
<job jobType="report" engineId="rwEng" retry="3"/>
and restart report server.
regards

Similar Messages

Infoview Reports timing out, Freezing and other performance issues

Hi all,
New user and been tasked with a project to try and get to the bottom of a problem our users get using infoview on our network. Now i have very little experience in these kind of things and this is more of a research and learn experience at the same time. I have highlighted in bold below what one of my colleagues has sent me in order to research.
You may have noticed Reports timing out, Freezing etc.
We need recognise whatu2019s causing it and any solutions we can apply.
It maybe down to Memory issues, on local machines. Cost of Queries on the databases or even Java versions used when either editing or viewing Webi reports.
Other considerations could be Network issues u2013 Are the problems just site specific
u2022     Identify reports that are causing problems. Is it down to the Queries used and can these be optimised to run faster u2013 Our DBA can assist with this using his Query profiler (ORACLE).
Or reports that have many tabs on, appear to take longer to open/edit u2013 is this Memory or Java.
u2022     Research the web for known issues/fixes,
u2022     Raise Topics on Forums such as BOB and the SAP forum u2013 explaining the above, Can we find out what causes it, which Java versions we should be using, and recommended amount of Memory (RAM) etc.
At the moment im busy just getting a list of reports our users are having a problem with along with any error messages etc. Now in order to get help from some gurus on here i obviously would need to supply more information on our setup so if anyone can help just tell me what information you need and i will get this for you.

Hi,
Here's my best suggestion, use a monitoring tool like Remote Support Component: www.service.sap.com/remote-supportability
you can use this utlity to diagnose your system and all aspects of its latency
regards,
H

Web intelligence Report timing out

Hi
We are using BO XI 2. Recently we have started facing an issue with some of our reports. The reports started failing after a database bounce. We are using Oracle Database. Before the bounce the reports used to be generated within 15 minutes. After the bounce the reports started timing out. Not sure what caused this issue. To eliminate problem with the datatbase we ran the query separately which ran in 15 minutes.
Can someone help us out on the same

Aditya,
       Option 1. see Page 197.
1. Stop Tomcat.
2. Open the server.xml for Tomcat.
On Windows, server.xml is located at: C:Program Files (x86)SAP BusinessObjectsTomcat6conf On UNIX server.xml is located at <CATALINA_HOME>/conf. The default value of <CATALI NA_HOME> is <INSTALLDIR>/bobje/tomcat55 3. Locate this section in the server.xml file:

<!--
<Connector port="8082"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false"
acceptCount="100" debug="0" connectionTimeout="20000"
proxyPort="80" disableUploadTimeout="true"
Option 2. Find attached Admin document and see page 734-735 This section provides the command-line options that are specific to the Web Intelligence Processing Server.
The default path to the server on Windows is <INSTALLDIR>SAP BusinessObjects Business Intelligence platform 4.0win64_x64WIReportServer.exe.
Option 2..
      In CMC Webi Intelligence Processing Server you can change the properties.
Web Intelligence Core Service
Use Configuration Template
Timeout Before Recycling (seconds):
Idle Document Timeout (seconds):
Server Polling Interval (seconds):
Maximum Documents per User:
Maximum Documents Before Recycling:
Allow Document Map Maximum Size Errors
Idle Connection Timeout (minutes):
Maximum Connections:
Enable Memory Analysis
Memory Lower Threshold (MB):
Memory Upper Threshold (MB):
Option 3.
http://busobj.wordpress.com/2010/01/14/how-to-set-various-web-intelligence-timeouts/
[BI4.0] Timeout settings
Option 4.
Change the time out/Query Execution time in Universe Designer - Query Properties - Web Intelligence Time properties in Infoview and change the Max Records Retrieval also.
Thanks,
Suresh

Hyperion Reports timing out

Hi,
I get this error when trying to rum some reports.
5200 : Error executing query: Servername/AppName/DBname//Error(1042017) Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again.
I have tripple the size of the NettRetryCount and NetDelay, but still get the same error.
Any help will be appreciated
Edited by: user8673221 on 2010/04/13 11:49 PM

If the Essbase Server is on Windows, you have to change your TCPIP Parameters instead.
The number of ports that are available for processes needs to be increased.
For some reason, for each element and page a new connection is generated. Windows will run out of available ports very quickly.
Sascha.

Reports Timing Out - FInancial Reporting

We have a couple of large books of reports that appear to be timing out when we try to run them. Does anyone know of any suggestions other than making the book smaller? Here is one of the error messages:
5200: Error executing query: Network error [10048]: Unable to connect to [Essbase:1423]. The client timed out waiting to connect to Analytic Services Agent using TCP/IP. Check your network connections. Also make sure that server and port values are correct;hasPovDims=1;povXML=<?xml version="1.0"?><datasources><datasource name

Hi,
This error is due to of two reasons, either the size of the books or the reports calcualtion time. Check running individual reports run time. I guess there should be some reports that has calculation or filtering the data issues, which inturn results in runtime problem. Make reports more dynamic. This should solve the problem.
Thank you,
Sm

Only some database connections timing out?

HI we are running a 2 node oracle rac cluster 10.2.0.3 and recently we moved our corporate office into a new location. We connect to our production database servers from the corporate location and since the move I have noticed that when we are connected to the database with either toad or sql navigator the connections seem to be timing out and loosing connections since we have moved to the new location? Other connections to the servers like putty ssh stay connected all the time and no problems with the network? Our connection from corporate and prod is faster than before so I am perplexed as to why the connections are dropping? Is there any timeout that I could be hitting?They stay connected for a few hours anf then will drop?
Thanks.

>
HI we are running a 2 node oracle rac cluster 10.2.0.3 and recently we moved our corporate office into a new location. We connect to our production database servers from the corporate location and since the move I have noticed that when we are connected to the database with either toad or sql navigator the connections seem to be timing out and loosing connections since we have moved to the new location? Other connections to the servers like putty ssh stay connected all the time and no problems with the network? Our connection from corporate and prod is faster than before so I am perplexed as to why the connections are dropping? Is there any timeout that I could be hitting?
>
Check whether there is a sqlnet.ora on only one of the nodes in your cluster with SQLNET.EXPIRE_TIME set .
That could cause only some connections getting expired.
From the docs
http://download.oracle.com/docs/cd/B19306_01/network.102/b14213/sqlnet.htm#sthref474
>
SQLNET.EXPIRE_TIME
Purpose
Use parameter SQLNET.EXPIRE_TIME to specify a the time interval, in minutes, to send a probe to verify that client/server connections are active. Setting a value greater than 0 ensures that connections are not left open indefinitely, due to an abnormal client termination. If the probe finds a terminated connection, or a connection that is no longer in use, it returns an error, causing the server process to exit. This parameter is primarily intended for the database server, which typically handles multiple connections at any one time.
>
Kind regards
Uwe
http://uhesse.wordpress.com

How do you solve issue of reports timing out with SSRS (2008 R2) Report Manger?

When trying to access reports through Report Manager we get an error:
An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database. (rsReportServerDatabaseError)
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
The reports were all running ok until the night before last when some more reports were deployed.
Now that this has occurred it is impossible to carry out any action on the reports in the Report Manager - e.g. delete etc.
This issue is also affecting Reports that are accessed through the ReportServer.
A typical log we get is as below:
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United Kingdom)</Locale>
<TimeZone>GMT Daylight Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\Logfiles\ReportServerService__04_17_2014_09_26_58.log</Path>
<SystemName>WIN-0F023F9I3H1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>2432</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!828!04/17/2014-09:26:58:: i INFO: CLR runtime is initialized.
rshost!rshost!828!04/17/2014-09:26:58:: i INFO: Derived memory configuration based on physical memory as 4193784 KB
appdomainmanager!DefaultDomain!d20!04/17/2014-09:26:58:: i INFO: Entered managed ServiceMain in DefaultDomain.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing DailyCleanupMinuteOfDay to '120' minutes since midnight as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing MaxScheduleWait to '60' second(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException'
as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException'
as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing AuthenticationTypes to '5' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing RSWindowsExtendedProtectionLevel to 'Off' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing RSWindowsExtendedProtectionScenario to 'Proxy' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing EnableAuthPersistence to 'True' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing MemorySafetyMargin to '80' percent as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing MemoryThreshold to '90' percent as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: w WARN: Initializing UrlRoot to default value of '' because it was incorrectly specified in Configuration file as ''.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing IsReportManagerEnabled to 'True' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing MaxConnections to '2' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing Timeout to '10' second(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing AppID to '(Default)' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing CacheLevel to 'Default' as specified in Configuration file.
resourceutilities!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Reporting Services starting SKU: Standard
configmanager!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Using report server internal url http://localhost:80/ReportServer.
configmanager!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Using report server external url http://WIN-0F023F9I3H1:80/ReportServer.
configmanager!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Using url root http://WIN-0F023F9I3H1:80/ReportServer.
rshost!rshost!b78!04/17/2014-09:26:59:: i INFO: Configuring maxPhysicalCpu=4, minLogicalCpu=0
rshost!rshost!b78!04/17/2014-09:26:59:: i INFO: Logical processor per physical processor 4
rshost!rshost!b78!04/17/2014-09:26:59:: i INFO: Maximum logical CPU is 4
configmanager!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Using report server internal url http://localhost:80/ReportServer.
configmanager!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Using report server external url http://WIN-0F023F9I3H1:80/ReportServer.
configmanager!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Using url root http://WIN-0F023F9I3H1:80/ReportServer.
appdomainmanager!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Appdomain:2 WindowsService_0 started.
resourceutilities!WindowsService_0!b78!04/17/2014-09:27:00:: i INFO: Reporting Services starting SKU: Standard
library!WindowsService_0!e34!04/17/2014-09:27:00:: i INFO: Catalog SQL Server Edition = Standard
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Registered url=http://+:80/ReportServer/, vdir=/ReportServer, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer.
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Registered url=http://regreports.edfringe.com:80/ReportServer/, vdir=/ReportServer, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer.
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Registered url=http://localhost:80/ReportServer/, vdir=/ReportServer, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer.
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Currently registered url http://localhost:80/ReportServer/ on endpoint 2
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Currently registered url http://regreports.edfringe.com:80/ReportServer/ on endpoint 2
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Currently registered url http://+:80/ReportServer/ on endpoint 2
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Registered url=http://+:80/Reports/, vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportManager.
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Registered url=http://regreports.edfringe.com:80/Reports/, vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportManager.
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Registered url=http://localhost:80/Reports/, vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportManager.
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Currently registered url http://localhost:80/Reports/ on endpoint 3
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Currently registered url http://regreports.edfringe.com:80/Reports/ on endpoint 3
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Currently registered url http://+:80/Reports/ on endpoint 3
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\ReportBuilder.
resourceutilities!DefaultDomain!b78!04/17/2014-09:27:00:: i INFO: Maximum memory limit is 65536Mb
rshost!rshost!b78!04/17/2014-09:27:00:: i INFO: Derived memory configuration based on physical memory as 4193784 KB
servicecontroller!DefaultDomain!1578!04/17/2014-09:27:00:: i INFO: Total Physical memory: 4294434816
rpcserver!DefaultDomain!1044!04/17/2014-09:27:00:: i INFO: Process monitoring started.
crypto!WindowsService_0!e34!04/17/2014-09:27:00:: i INFO: Initializing crypto as user: NT AUTHORITY\NETWORK SERVICE
crypto!WindowsService_0!e34!04/17/2014-09:27:00:: i INFO: Exporting public key
crypto!WindowsService_0!e34!04/17/2014-09:27:00:: i INFO: Performing sku validation
crypto!WindowsService_0!e34!04/17/2014-09:27:00:: i INFO: Importing existing encryption key
dbpolling!WindowsService_0!e34!04/17/2014-09:27:00:: i INFO: EventPolling polling service started
dbpolling!WindowsService_0!e34!04/17/2014-09:27:00:: i INFO: NotificationPolling polling service started
dbpolling!WindowsService_0!e34!04/17/2014-09:27:00:: i INFO: SchedulePolling polling service started
dbpolling!WindowsService_0!e34!04/17/2014-09:27:00:: i INFO: UpgradePolling polling service started
dbpolling!WindowsService_0!f74!04/17/2014-09:27:00:: i INFO: HeartbeatThread(EventPolling): heartbeat thread started.
dbpolling!WindowsService_0!51c!04/17/2014-09:27:00:: i INFO: HeartbeatThread(NotificationPolling): heartbeat thread started.
dbpolling!WindowsService_0!11d4!04/17/2014-09:27:00:: i INFO: PollingMaintenance: Polling started
resourceutilities!WindowsService_0!11d4!04/17/2014-09:27:00:: i INFO: Maximum memory limit is 65536Mb
rpcserver!DefaultDomain!e34!04/17/2014-09:27:00:: i INFO: RPC Server started.
servicecontroller!DefaultDomain!e34!04/17/2014-09:27:00:: i INFO: RPC Server started. Endpoint name ='ReportingServices$MSRS10_50.MSSQLSERVER'
appdomainmanager!WindowsService_0!e34!04/17/2014-09:27:00:: i INFO: Appdomain:2 WindowsService_0 initialized.
library!DefaultDomain!e34!04/17/2014-09:27:01:: i INFO: Catalog SQL Server Edition = Standard
appdomainmanager!DefaultDomain!123c!04/17/2014-09:27:51:: i INFO: Appdomain:3 ReportManager_MSSQLSERVER_0-1-130421968711068584 started.
appdomainmanager!ReportManager_0-1!123c!04/17/2014-09:27:51:: i INFO: RS authentication mode is 5; effective ASP.NET authentication mode is Windows. vdir=/Reports.
appdomainmanager!DefaultDomain!123c!04/17/2014-09:27:51:: i INFO: Appdomain:3 ReportManager_MSSQLSERVER_0-1-130421968711068584 initialized (#1).
appdomainmanager!DefaultDomain!100!04/17/2014-09:27:54:: i INFO: Appdomain:4 ReportServer_MSSQLSERVER_0-2-130421968744180477 started.
appdomainmanager!ReportServer_0-2!100!04/17/2014-09:27:54:: i INFO: RS authentication mode is 5; effective ASP.NET authentication mode is Windows. vdir=/ReportServer.
appdomainmanager!DefaultDomain!100!04/17/2014-09:27:54:: i INFO: Appdomain:4 ReportServer_MSSQLSERVER_0-2-130421968744180477 initialized (#1).
webserver!ReportServer_0-2!100!04/17/2014-09:28:00:: i INFO: Reporting Web Server started
resourceutilities!ReportServer_0-2!100!04/17/2014-09:28:01:: i INFO: Reporting Services starting SKU: Standard
resourceutilities!ReportServer_0-2!100!04/17/2014-09:28:01:: i INFO: Maximum memory limit is 65536Mb
library!ReportServer_0-2!6f4!04/17/2014-09:28:02:: Call to GetPermissionsAction(/).
library!ReportServer_0-2!6f4!04/17/2014-09:28:03:: i INFO: Catalog SQL Server Edition = Standard
crypto!ReportServer_0-2!6f4!04/17/2014-09:28:03:: i INFO: Initializing crypto as user: NT AUTHORITY\NETWORK SERVICE
crypto!ReportServer_0-2!6f4!04/17/2014-09:28:03:: i INFO: Exporting public key
crypto!ReportServer_0-2!6f4!04/17/2014-09:28:03:: i INFO: Performing sku validation
crypto!ReportServer_0-2!6f4!04/17/2014-09:28:03:: i INFO: Importing existing encryption key
library!ReportServer_0-2!6f4!04/17/2014-09:28:03:: Call to GetPropertiesAction(/, PathBased).
library!ReportServer_0-2!6f4!04/17/2014-09:28:03:: Call to GetPropertiesAction(/, PathBased).
library!ReportServer_0-2!6f4!04/17/2014-09:28:03:: Call to GetSystemPermissionsAction().
library!ReportServer_0-2!6f4!04/17/2014-09:28:03:: Call to ListChildrenAction(/, False).
library!ReportServer_0-2!6f4!04/17/2014-09:28:03:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!6f4!04/17/2014-09:28:03:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!6f4!04/17/2014-09:28:06:: Call to GetPermissionsAction(/EFW_Reports).
library!ReportServer_0-2!6f4!04/17/2014-09:28:06:: Call to GetPropertiesAction(/EFW_Reports, PathBased).
library!ReportServer_0-2!6f4!04/17/2014-09:28:06:: Call to GetPropertiesAction(/EFW_Reports, PathBased).
library!ReportServer_0-2!6f4!04/17/2014-09:28:06:: Call to GetSystemPermissionsAction().
library!ReportServer_0-2!6f4!04/17/2014-09:28:06:: Call to ListChildrenAction(/EFW_Reports, False).
library!ReportServer_0-2!6f4!04/17/2014-09:28:06:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!6f4!04/17/2014-09:28:06:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!6f4!04/17/2014-09:28:06:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!e34!04/17/2014-09:28:15:: Call to GetPermissionsAction(/EFW_Reports/Show_Proof_Orgs).
library!ReportServer_0-2!e34!04/17/2014-09:28:15:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!e34!04/17/2014-09:28:15:: Call to GetPropertiesAction(/EFW_Reports/Show_Proof_Orgs, PathBased).
library!ReportServer_0-2!e34!04/17/2014-09:28:16:: Call to GetSystemPermissionsAction().
ui!ReportManager_0-1!168c!04/17/2014-09:28:16:: i INFO: PageCountMode 'Estimate' read from config file
ui!ReportManager_0-1!168c!04/17/2014-09:28:16:: i INFO: AccessibleTablix value not specified in config file.
library!ReportServer_0-2!e34!04/17/2014-09:28:17:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!e34!04/17/2014-09:30:23:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerStorageException: , An error occurred within the report server database. This may be due to a connection failure, timeout
or low disk condition within the database.;
library!ReportServer_0-2!e34!04/17/2014-09:30:23:: w WARN: Transaction rollback was not executed connection is invalid
library!ReportServer_0-2!e34!04/17/2014-09:32:28:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerStorageException: , An error occurred within the report server database. This may be due to a connection failure, timeout
or low disk condition within the database.;
library!ReportServer_0-2!e34!04/17/2014-09:32:28:: w WARN: Transaction rollback was not executed connection is invalid

When trying to access reports through Report Manager we get an error:
An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database. (rsReportServerDatabaseError)
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
The reports were all running ok until the night before last when some more reports were deployed.
Now that this has occurred it is impossible to carry out any action on the reports in the Report Manager - e.g. delete etc.
This issue is also affecting Reports that are accessed through the ReportServer.
A typical log we get is as below:
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United Kingdom)</Locale>
<TimeZone>GMT Daylight Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\Logfiles\ReportServerService__04_17_2014_09_26_58.log</Path>
<SystemName>WIN-0F023F9I3H1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>2432</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!828!04/17/2014-09:26:58:: i INFO: CLR runtime is initialized.
rshost!rshost!828!04/17/2014-09:26:58:: i INFO: Derived memory configuration based on physical memory as 4193784 KB
appdomainmanager!DefaultDomain!d20!04/17/2014-09:26:58:: i INFO: Entered managed ServiceMain in DefaultDomain.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing DailyCleanupMinuteOfDay to '120' minutes since midnight as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing MaxScheduleWait to '60' second(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException'
as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException'
as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing AuthenticationTypes to '5' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing RSWindowsExtendedProtectionLevel to 'Off' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing RSWindowsExtendedProtectionScenario to 'Proxy' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing EnableAuthPersistence to 'True' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing MemorySafetyMargin to '80' percent as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing MemoryThreshold to '90' percent as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: w WARN: Initializing UrlRoot to default value of '' because it was incorrectly specified in Configuration file as ''.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing IsReportManagerEnabled to 'True' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing MaxConnections to '2' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing Timeout to '10' second(s) as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing AppID to '(Default)' as specified in Configuration file.
library!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Initializing CacheLevel to 'Default' as specified in Configuration file.
resourceutilities!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Reporting Services starting SKU: Standard
configmanager!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Using report server internal url http://localhost:80/ReportServer.
configmanager!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Using report server external url http://WIN-0F023F9I3H1:80/ReportServer.
configmanager!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Using url root http://WIN-0F023F9I3H1:80/ReportServer.
rshost!rshost!b78!04/17/2014-09:26:59:: i INFO: Configuring maxPhysicalCpu=4, minLogicalCpu=0
rshost!rshost!b78!04/17/2014-09:26:59:: i INFO: Logical processor per physical processor 4
rshost!rshost!b78!04/17/2014-09:26:59:: i INFO: Maximum logical CPU is 4
configmanager!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Using report server internal url http://localhost:80/ReportServer.
configmanager!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Using report server external url http://WIN-0F023F9I3H1:80/ReportServer.
configmanager!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Using url root http://WIN-0F023F9I3H1:80/ReportServer.
appdomainmanager!DefaultDomain!b78!04/17/2014-09:26:59:: i INFO: Appdomain:2 WindowsService_0 started.
resourceutilities!WindowsService_0!b78!04/17/2014-09:27:00:: i INFO: Reporting Services starting SKU: Standard
library!WindowsService_0!e34!04/17/2014-09:27:00:: i INFO: Catalog SQL Server Edition = Standard
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Registered url=http://+:80/ReportServer/, vdir=/ReportServer, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer.
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Registered url=http://regreports.edfringe.com:80/ReportServer/, vdir=/ReportServer, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer.
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Registered url=http://localhost:80/ReportServer/, vdir=/ReportServer, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer.
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Currently registered url http://localhost:80/ReportServer/ on endpoint 2
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Currently registered url http://regreports.edfringe.com:80/ReportServer/ on endpoint 2
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Currently registered url http://+:80/ReportServer/ on endpoint 2
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Registered url=http://+:80/Reports/, vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportManager.
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Registered url=http://regreports.edfringe.com:80/Reports/, vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportManager.
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Registered url=http://localhost:80/Reports/, vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportManager.
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Currently registered url http://localhost:80/Reports/ on endpoint 3
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Currently registered url http://regreports.edfringe.com:80/Reports/ on endpoint 3
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Currently registered url http://+:80/Reports/ on endpoint 3
rshost!rshost!1044!04/17/2014-09:27:00:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\ReportBuilder.
resourceutilities!DefaultDomain!b78!04/17/2014-09:27:00:: i INFO: Maximum memory limit is 65536Mb
rshost!rshost!b78!04/17/2014-09:27:00:: i INFO: Derived memory configuration based on physical memory as 4193784 KB
servicecontroller!DefaultDomain!1578!04/17/2014-09:27:00:: i INFO: Total Physical memory: 4294434816
rpcserver!DefaultDomain!1044!04/17/2014-09:27:00:: i INFO: Process monitoring started.
crypto!WindowsService_0!e34!04/17/2014-09:27:00:: i INFO: Initializing crypto as user: NT AUTHORITY\NETWORK SERVICE
crypto!WindowsService_0!e34!04/17/2014-09:27:00:: i INFO: Exporting public key
crypto!WindowsService_0!e34!04/17/2014-09:27:00:: i INFO: Performing sku validation
crypto!WindowsService_0!e34!04/17/2014-09:27:00:: i INFO: Importing existing encryption key
dbpolling!WindowsService_0!e34!04/17/2014-09:27:00:: i INFO: EventPolling polling service started
dbpolling!WindowsService_0!e34!04/17/2014-09:27:00:: i INFO: NotificationPolling polling service started
dbpolling!WindowsService_0!e34!04/17/2014-09:27:00:: i INFO: SchedulePolling polling service started
dbpolling!WindowsService_0!e34!04/17/2014-09:27:00:: i INFO: UpgradePolling polling service started
dbpolling!WindowsService_0!f74!04/17/2014-09:27:00:: i INFO: HeartbeatThread(EventPolling): heartbeat thread started.
dbpolling!WindowsService_0!51c!04/17/2014-09:27:00:: i INFO: HeartbeatThread(NotificationPolling): heartbeat thread started.
dbpolling!WindowsService_0!11d4!04/17/2014-09:27:00:: i INFO: PollingMaintenance: Polling started
resourceutilities!WindowsService_0!11d4!04/17/2014-09:27:00:: i INFO: Maximum memory limit is 65536Mb
rpcserver!DefaultDomain!e34!04/17/2014-09:27:00:: i INFO: RPC Server started.
servicecontroller!DefaultDomain!e34!04/17/2014-09:27:00:: i INFO: RPC Server started. Endpoint name ='ReportingServices$MSRS10_50.MSSQLSERVER'
appdomainmanager!WindowsService_0!e34!04/17/2014-09:27:00:: i INFO: Appdomain:2 WindowsService_0 initialized.
library!DefaultDomain!e34!04/17/2014-09:27:01:: i INFO: Catalog SQL Server Edition = Standard
appdomainmanager!DefaultDomain!123c!04/17/2014-09:27:51:: i INFO: Appdomain:3 ReportManager_MSSQLSERVER_0-1-130421968711068584 started.
appdomainmanager!ReportManager_0-1!123c!04/17/2014-09:27:51:: i INFO: RS authentication mode is 5; effective ASP.NET authentication mode is Windows. vdir=/Reports.
appdomainmanager!DefaultDomain!123c!04/17/2014-09:27:51:: i INFO: Appdomain:3 ReportManager_MSSQLSERVER_0-1-130421968711068584 initialized (#1).
appdomainmanager!DefaultDomain!100!04/17/2014-09:27:54:: i INFO: Appdomain:4 ReportServer_MSSQLSERVER_0-2-130421968744180477 started.
appdomainmanager!ReportServer_0-2!100!04/17/2014-09:27:54:: i INFO: RS authentication mode is 5; effective ASP.NET authentication mode is Windows. vdir=/ReportServer.
appdomainmanager!DefaultDomain!100!04/17/2014-09:27:54:: i INFO: Appdomain:4 ReportServer_MSSQLSERVER_0-2-130421968744180477 initialized (#1).
webserver!ReportServer_0-2!100!04/17/2014-09:28:00:: i INFO: Reporting Web Server started
resourceutilities!ReportServer_0-2!100!04/17/2014-09:28:01:: i INFO: Reporting Services starting SKU: Standard
resourceutilities!ReportServer_0-2!100!04/17/2014-09:28:01:: i INFO: Maximum memory limit is 65536Mb
library!ReportServer_0-2!6f4!04/17/2014-09:28:02:: Call to GetPermissionsAction(/).
library!ReportServer_0-2!6f4!04/17/2014-09:28:03:: i INFO: Catalog SQL Server Edition = Standard
crypto!ReportServer_0-2!6f4!04/17/2014-09:28:03:: i INFO: Initializing crypto as user: NT AUTHORITY\NETWORK SERVICE
crypto!ReportServer_0-2!6f4!04/17/2014-09:28:03:: i INFO: Exporting public key
crypto!ReportServer_0-2!6f4!04/17/2014-09:28:03:: i INFO: Performing sku validation
crypto!ReportServer_0-2!6f4!04/17/2014-09:28:03:: i INFO: Importing existing encryption key
library!ReportServer_0-2!6f4!04/17/2014-09:28:03:: Call to GetPropertiesAction(/, PathBased).
library!ReportServer_0-2!6f4!04/17/2014-09:28:03:: Call to GetPropertiesAction(/, PathBased).
library!ReportServer_0-2!6f4!04/17/2014-09:28:03:: Call to GetSystemPermissionsAction().
library!ReportServer_0-2!6f4!04/17/2014-09:28:03:: Call to ListChildrenAction(/, False).
library!ReportServer_0-2!6f4!04/17/2014-09:28:03:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!6f4!04/17/2014-09:28:03:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!6f4!04/17/2014-09:28:06:: Call to GetPermissionsAction(/EFW_Reports).
library!ReportServer_0-2!6f4!04/17/2014-09:28:06:: Call to GetPropertiesAction(/EFW_Reports, PathBased).
library!ReportServer_0-2!6f4!04/17/2014-09:28:06:: Call to GetPropertiesAction(/EFW_Reports, PathBased).
library!ReportServer_0-2!6f4!04/17/2014-09:28:06:: Call to GetSystemPermissionsAction().
library!ReportServer_0-2!6f4!04/17/2014-09:28:06:: Call to ListChildrenAction(/EFW_Reports, False).
library!ReportServer_0-2!6f4!04/17/2014-09:28:06:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!6f4!04/17/2014-09:28:06:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!6f4!04/17/2014-09:28:06:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!e34!04/17/2014-09:28:15:: Call to GetPermissionsAction(/EFW_Reports/Show_Proof_Orgs).
library!ReportServer_0-2!e34!04/17/2014-09:28:15:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!e34!04/17/2014-09:28:15:: Call to GetPropertiesAction(/EFW_Reports/Show_Proof_Orgs, PathBased).
library!ReportServer_0-2!e34!04/17/2014-09:28:16:: Call to GetSystemPermissionsAction().
ui!ReportManager_0-1!168c!04/17/2014-09:28:16:: i INFO: PageCountMode 'Estimate' read from config file
ui!ReportManager_0-1!168c!04/17/2014-09:28:16:: i INFO: AccessibleTablix value not specified in config file.
library!ReportServer_0-2!e34!04/17/2014-09:28:17:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!e34!04/17/2014-09:30:23:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerStorageException: , An error occurred within the report server database. This may be due to a connection failure, timeout
or low disk condition within the database.;
library!ReportServer_0-2!e34!04/17/2014-09:30:23:: w WARN: Transaction rollback was not executed connection is invalid
library!ReportServer_0-2!e34!04/17/2014-09:32:28:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerStorageException: , An error occurred within the report server database. This may be due to a connection failure, timeout
or low disk condition within the database.;
library!ReportServer_0-2!e34!04/17/2014-09:32:28:: w WARN: Transaction rollback was not executed connection is invalid

Custom Reports timing out for past 2 days.....

I have been trying for a couple days to create a custom report -
When i click on Reports > custom reports > ecommerce > I select products and click next and it has timed out consistently for a couple days now.....
This kind of stuff is why we are moving away from BC - you would think though as large as adobe is this platform would be more robust and stable. Very disapointing.
*sigh*

Hi Tom,
Have you raised a case or reach direct chat support? This is obviously not normal behavior and should be escalated if still happening.
If you have an existing case please provide this so I can check the status. Otherwise please proceed reaching to direct support with this.
Kind regards,
-Sidney

Report timing out

Hi gurus
I am trying to run a profitability report in production if the range is for one month it is working but if the range is for 1 year the report is timing out
can anyone suggest me what would be the problem please.

Hi
It is performance related issue. Try out this
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particular day > check query execution time.
/people/andreas.vogel/blog/2007/04/08/statistical-records-part-4-how-to-read-st03n-datasets-from-db-in-nw2004
/people/andreas.vogel/blog/2007/03/16/how-to-read-st03n-datasets-from-db
Try table rsddstats to get the statistics
Using cache memory will decrease the loading time of the report.
Run reporting agent at night and sending results to email. This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
Open the Aggregates...and observe VALUATION and USAGE columns.
"---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
In usage column,we will come to know how far the aggregate has been used in query.
Thus we can check the performance of the aggregate.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
performance ISSUE related to AGGREGATE
Note 356732 - Performance Tuning for Queries with Aggregates
Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
5. In BI 7 statistics need to be activated for ST03 and BI admin cockpit to work.
By implementing BW Statistics Business Content - you need to install, feed data and through ready made reports which for analysis.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
http://help.sap.com/saphelp_nw04/helpdata/en/c1/0dbf65e04311d286d6006008b32e84/frameset.htm
You can go to T-Code DB20 which gives you all the performance related information like
Partitions
Databases
Schemas
Buffer Pools
Tablespaces etc
use tool RSDDK_CHECK_AGGREGATE in se38 to check for the corrupt aggregates
If aggregates contain incorrect data, you must regenerate them.
202469 - Using aggregate check tool
Note 646402 - Programs for checking aggregates (as of BW 3.0B SP15)
You can find out whether an aggregate is usefull or useless you can find out through a proccess of checking the tables RSDDSTATAGGRDEF*
Run the query in RSRT with statistics execute and come back you will get STATUID... copy this and check in the table...
This gives you exactly which infoobjects it's hitting, if any one of the object is missing it's useless aggregate.
6
Check SE11 > table RSDDAGGRDIR . You can find the last callup in the table.
Generate Report in RSRT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
Business Intelligence Journal Improving Query Performance in Data Warehouses
http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Assign points if t helps
Cheers
SM

SCOM 2012 SP1 Report Timed out

Hi All,
My large reports are timing out after 30 minutes in SCOM 2012 SP1, with the error: The Operation has timed out
I'm trying to run the Performance Detail report from Microsoft Generic Report Library against Windows Server 2008 Operating System group (1400 servers) for last 1 year for Percent memory used. I can run the same report for Windows Server 2012 Operating System
group (200 servers) sucecssfully.
I've already verified and configured the reporting services for reports to not time out.
http://www.systemcentercentral.com/forums-archive/topic/scom-reports-large-reports-time-out/
http://anoopcnair.com/2011/07/20/configmgr-sccm-sql-server-reporting-service-timeout-expired/
Any suggestions?
Thanks,
Harry
Thanks, Harry :-)

Hi There,
Based on my knowledge, When ever a SQL query is ran against any database the query output is executed and stored in TempDB and then it is shown to your SSMS or reporting application.
So i would suggest you check the size of the temp SQLDB and see if auto growth is enabled for that and does your drive as well have enough space to hold that temp DB in its local drive if the DB grows its self.
As querying 1 years data for 1400 servers is a huge data and requires lot of time and space.
I had a similar issue here, Look here:
https://social.technet.microsoft.com/Forums/en-US/6420f4e1-fc21-49c9-8fed-eddbe6cecabf/my-sql-server-seems-to-be-creating-huge-tempdbmdf-file-post-database-migration?forum=sqlservermigration
Gautam.75801

SharePoint Site Very Slow and some time Request Timed Out

Hi All
I have many Web Application is running in SharePoint Farm. Since yesterday one of the web application started responding very slow. It takes 5 to 6 mins to load the page. Some time i received request timed out error message. But all other web applications
are working good.
I increased executionTimeout value, stall it slow / not responding.
Please let us know if you have come across this issues or any suggestion from your end to resolve this issue.
Thanks in Advance - Guru
Cheers, Guruprasad

i would recommend enable the developer dashboard on the web app and check which task is consuming the more time i.e. webpart, query to database etc.
also any change to web app since the issue started, any new webpart added to the page, any solution deployed or something else.
also did you try to recycle the app pool of the web applications?
how many wfe in the farm?
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Is Oracle Reports 11g out now or not?

When I look at the Oracle Fusion Middleware docs, they talk about 11g:
http://download.oracle.com/docs/cd/E12839_01/install.1111/e10421/toc.htm
But the official Oracle Reports Homepage is still about 10g:
http://www.oracle.com/technology/products/reports/index.html

Hello,
Yes , Fusion Middleware 11g R1 contains Forms & Reports 11g.
The Forms OTN web page has already been updated with new documents :
http://www.oracle.com/technology/products/forms/index.html
The Reports OTN web page will be updated too very soon ...
Regards

Report timing out, "Too many records"

I am using CR XIR2 with a univers that I created to run an inverntory report. The report works fine in the designer but when I go to run it from the CR Server It times out. (Very quickly). If I put filters and only pull a subset of the data the report works fine. This issue is there should not be too many records. Where can I check to make sure that there are no limitations set and I can get all of the records? I have set the parameters for the Universe to no limit records or time to execute. Is there any place else I can check? or any other ideas?
Thanks

What viewer do you use?
If the viewer is ADHTML, you are using the RAS (Report Application Server). In that case, you need to set the number of (db) records to read in the RAS properties on the CMC.
If the viewer is DHTML, Java or ActiveX, you are using the CR Page Server. You will need to set the number of db records to read in the Cryatal Reports Page Server properties on the CMC.

How to install Oracle Report Services in Oracle Application Server 10.1.3.1

My project is running on Oracle Application Server(OAS) 10.1.3.1, and I need to develop some Oracle Reports for my client.
But I find out there is not "Oracle Report Services" component in OAS 10.1.3.1 like OAS 10.1.2.
Is there Oracle Report Services for OAS 10.1.3.1? How to get it?

Max Yuan wrote:
You mean I need to install 2 OAS(10.1.2 for report, 10.1.3 for my project), or deploy my project to 11g? For the Reports reporting project, you'll need a version/edition that includes AS Reports Services.
In "10gr2" that means AS 10.1.2.0.2 (plus Patch set): AS Infrastructure + AS BI&Forms installation (enterprise edition) or the standalone Forms and Reports installation (EE or separate licensing). You also need the Developer Suit (Reports Builder). OFM "11gr1" suite has some version of Reports Services but I don't know the available packages and installation types.

Connection Timed Out

Hi,
I found some connections being timed out. Not sure where to start to analyze the issue. I wanted to find why this timeout error is occurring and how to track it further.
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for IBM/AIX aaa System/6000: Version 11.2.0.2.0 - Production
TCP/IP NT Protocol Adapter for IBM/AIX RISC System/6000: Version 11.2.0.2.0 - Production
Oracle Bequeath NT Protocol Adapter for IBM/AIX RISC System/6000: Version 11.2.0.2.0 - Production
Time: 13-MAY-2013 11:21:51
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
WARNING: inbound connection timed out (ORA-3136)
Mon May 13 11:45:43 2013
Database and OS version is above log.
Thanks and Regards
Venkata

Venkata,
These alerts are sqlnet log messages getting logged into you 11g alert log file, You may disable such alert as it is client specific timeout messages
In listener.ora ..
DIAG_ADR_ENABLED_<listener_name>=OFF
Thanks,
Ajay More
http://www.moreajays.com

Some Oracle Reports Timing Out

Similar Messages

Maybe you are looking for