Some OSX folders under bootcamp (Win7) not visible - why?

Hello,
a few months ago I set up Win7 via Bootcamp on my MBP 13.3" (mid '09) and I noticed that sometimes (when in Win7) I was searching really long for a specific folder (just a folder with some music in it, nothing special). I gave up and thought I might have accidently deleted it. But when back in OSX I directly found the folder, so he was there. The name folder is named "Ambient/Chillout". But interestingly the problems also exists vice versa. Some Word documents (written under Win7) are not visible for me when in OSX. They are not even visible when I copy the document to an external device (flash usb drive).
Does anyone have an idea what is going here?!
Thanks so far.

Well, somewhere there is/was a question? I guess.
Without the driver from MediaFour or Paragon you can only see some folders, and not be able to see or mount folders, drives and partitions outside the limits of the AppleHFS and home folder or share folder.
So if you want to use an external drive, you can't.
With a driver you don't need to copy back and forth - word and itunes need write access to open those items.
I don't like Spotlight reindexing Windows partition over and over or leaving hidden ".DS and ._DS" files in every folder so I place them in Privacy tab.

Similar Messages

I cannot hear voice through my headset under bootcamp win7.

I cannot hear voice through my headset under bootcamp win7.
would anyone provide update for Mac Air Boot Camp4.0 with Win7 32 bit ?
thanks

There are quite a few posts about the same sound issues so the best thing to do is to do a search here for something like "no sound in headphones in Windows" or something similar and try the one that fits your problem.
Basically you have to enable them in the sound Control Panel, re-install just the Boot Camp sound drivers manually or possibly down load the sound drivers for your hardware (your sound card) from the manufacturer directly.

Some Media Card folders within 'documents' folder not visible in Windows XP Pro SP3

I have tried renaming these folders on the device (eliminating '.'s and generally shortening the folder names) and then connecting to a Windows machine again afterwards, however, I have two problematic folders (within the 'documents' folder) that are still not visible in Windows.
One thing that is kind of troubling is that I thought I noticed that when I was moving files out of the 'documents' root directory (only place I can put files from the Windows machine [while connected] because I can't see the target folders in Windows) on the device to one of the problematic folders (again, because I cannot accomplish this in Windows), the original full-length folder name was still being referenced in the path displayed in the intermediate confirmation dialog.
Does it matter whether the folders are created within the (connected to) Windows environment or done on the device? Are there folder name length considerations or illegal characters?
I have created (in the Windows environment, while connected) some rather long folder names (including ''' & '.' characters) within the 'pictures' directory and have no trouble seeing them later in Windows.
What could be going on here?
Thanks, FFF

... bump ...

TS1978 Bootcamp Drive not Visible.

When booting to start-up mode (opt key), my bootcamp drive is not visible. It happens consistently, and I have tried resetting PRAM and SMC, and it doesn't work. The bootcamp drive also does not show up in the startup manager in OS X. Why? And what should I do?

Yes, windows 7 is installed on its own drive in my mac pro. No partition.
Here is the info on the same model hard-drive in system profiler. The faulty hard-drive provides no information, but the two hard drives are the same model. When I formatted the drive for windows, I don't remember if I used NTFS or FAT. How can I find out?
Capacity:          500.11 GB (500,107,862,016 bytes)
Model:          WDC WD5000AAKS-41YGA0
Revision:          58.01E01
Serial Number:               WD-WCASXXXXXXXX
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk1
Medium Type:          Rotational
Bay Name:          Bay 3
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified

Folders under public documents not seen/accessed

hi,
hi,
I have folders under public documents
IT
|____IT1
|____IT2
Finance
I have carried out inital permissions setting as per the how to document and SAP note.
For public documents folder Everyone(group) are given read only permission.
for user 1 I have given full access to IT1
and for user 2 I have give full access to IT2.
But User 1 cant see or access IT1 folder and User 2 cant see or access IT2 folder. I dont know what wrong i'm doing.
I have created new user basic role. I'm not using standard eu_role. Is it a problem.
Just wondering why those users are not able to see the folders.
Do I have to attach anything to the Everyone(group).
Regards,
Maya
Kindly help me as what I'm missing.

Hi Maya,
please see my answer in your other thread in the KM Forum. One thread should be enough, I guess
Hope it helps,
Robert

Bootcamp: Win7, not enough memory.

I mainly run Bootcamp: Win7 for gaming such as StarTrek Online and it generally runs well. However, often when playing StarTrek Online I get a little message from the computer in the upper right hand corner telling me the game is "running in reduced textures due to low memory." I have 8 GB of memory installed on the MacMini. This is the maximum the mini can hold and should be sufficient. Has anyone experience this problem?

This sounds logical. Do know if the video memory in a MacMini can be adjusted? I have a feeling it can't and I'm at work now so I can't check. Perhaps in the Windows settings I could tweak it? Thanks!
Update: I read up on it... it's a shared system memory thing. So, no way to allocate.

0REQUID not visible - why?

Hello,
I am facing following challenge:
For some reasons I need Object 0REQUID in my cube.
That Object 0REQUID is available in BEx is clear (it's predefined)
but when I search DDIC and Business Content the Object is not available.
Any clue why 0REQUID is not visible!?

Hello Roberto,
so there is no possiblility to handle 0REQUID?
Or is there another way to fill an self-defined object with the request-ID?
(Background information: I do not use queries because I use the BW system which is integrated in a DP (=demand planning) system).

Installing Actions in PSE 9/ folders under Locale do not exist ???

I am trying to intall some actions under C>Programs x86>Adobe>PSE9>Locale>en_US>WorkFlow Panels>Actions but Workflow Panels and Actions do not show when I navigate through C: drive--
I have created new folders and named them accordingly and placed the Actions I want to install in the new Actions folder to no avail.
I went to Folder Options and checked the Show Hidden Files /folders in the hope that the system would reveal the missing folders but to no avail.
I am running Win 7 64-bit.
Any ideas as to how to install the actions will be appreciated! Many thanks.

Remove those folders you created, since you're in the wrong place. Actions go in C:\ProgramData\Adobe, etc. Try that (with hidden file viewing enabled) and you should see the whole path.

BOOTCAMP partition not visible in Finder, not Mountable in Disk Utility

Did a fresh Bootcamp install of Windows 7 on my MBA running 10.9.4, switched back and forth a few times and now the BOOTCAMP partition doesn't show up in the left pane in Finder. I hopped into Disk Utility to see what was going on and it was there, just not mounted, so I clicked mount, was told it couldn't be mounted, and it suggested I run first aid on it. I clicked Verify, nothing useful to me, then Repair, and got quite a lot of feedback that I do not understand, and then after that it was still unmountable.
I tried to copy everything it said into a pastebin because it was very long with lots of starting and stopping and counting percents inbetween, but it was over 500kb and that's the limit for free users on pastebin, so here's a trimmed version. http://pastebin.com/neBUTdZi
I tried booting into Windows after that, and it jumped into System Repair. Apparently, according to Windows, my Boot Manager is missing or corrupt... and since I still can't access it from the Mac side of things, I thought I'd just wipe the partition in BootCamp Utility and start over.
Except instead, I get this error:
"Your disk could not be restored to a single partition.
An error occurred while restoring the disk to a single partition."
Disk Utility let me wipe it but I still can't mount it, either, again suggesting I run first aid on it (this does nothing). I can't boot into the Mac's Recovery mode either. It just jumps straight to Internet Recovery. When I hold option upon boot, all three partitions show up (Mac, Recovery, Windows), but when I click the recovery one it loads for a bit and then the laptop just instantly shuts off.... I'm more than a little frightened now. Have I corrupted my internal harddrive perchance?

You should be able to do it from Internet Recovery or you can try to add the Recovery partition back.
Recovery Partition – Recreate Without Reinstalling
Recovery Partition – Recreate Without Reinstalling (Requires Installer)

Few folders in Business area not visible in Desktop edition

I am using Discoverer 4 on Windows NT. I created a new business area using Administrative edition. When I used Desktop edition to create a new workbook, in Step 2, when I selected the new business area I created, the folders (tables) in this business area are listed in the Available list. A few of the folders that are shown in the Administrative edition are not shown in the Available List in the Desktop edition. Are there specific conditions for a folder to be listed in the Available list of the Desktop edition?
Please reply to [email protected]
Thanks.

I had a similar problem. What you might want to try is to Refresh the business area in the Admin edition. That should work.
I am using Discoverer 4 on Windows NT. I created a new business area using Administrative edition. When I used Desktop edition to create a new workbook, in Step 2, when I selected the new business area I created, the folders (tables) in this business area are listed in the Available list. A few of the folders that are shown in the Administrative edition are not shown in the Available List in the Desktop edition. Are there specific conditions for a folder to be listed in the Available list of the Desktop edition?
Please reply to [email protected]
Thanks.

Mouse Path Not Visible - Why?

Hi, all. I'm editing a Captivate demo using Captivate 3 and
for some reason the paths for the mouse movement aren't visible. I
can't select or move the mouse and when I right-click on it I'm not
offered an option to align it's movement to the previous slide. I
added a slide at the head of the show and added a mouse cursor
manually, which affords me all of these options. Did I do something
during the capture that would make the mouse movements
uneditable?

Hi there
Two questions here.
1. Do the slides in the Film strip have the mouse icon on
them? Or do they instead have a Camcorder icon on them?
If they have a Camcorder icon, this means they are full
motion recording (FMR) slides. You may not edit the mouse movements
in a FMR.
2. Assuming the Film Strip slides actually have a Mouse icon
on them, look in your Timeline area. Look to the left of the Mouse
object. Do you see a simple dot or do you see a padlock icon or
possibly an X in the other field? If so, it means you have either
hidden or locked that object on the slide. Click the X or the
padlock icon to unlock or un-hide the mouse.
Cheers... Rick

When I look at gmaps pedometer website on my laptop's LCD screen the streets are all washed out and the gray background is not visible - Why?

When I connect my laptop to a monitor - the problem is not there. I can see local streets clearly because the background color is gray and the streets are white - Any ideas as to why?

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
See also:
*http://kb.mozillazine.org/Websites_look_wrong
*http://kb.mozillazine.org/Images_or_animations_do_not_load
Try to reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.

Yosemite: Thumbnails not visible in Finder

I ran into a strange problem immediately after updating to Yosemite.
I have a 2014 mbp dual-video, 16 gb ram.
In any folder on my drive icons are not visible. They are there, I can drag and copy-paste folders and files, but the finder only shows a blank white window. Everything looks normal in List, Columns or Cover Flow modes.
I did a safe mode boot and restarted normally and everything went back to normal, including visible icons. But now I have the problem with an external ExFat drive. Anyone know how to solve this or what's going on?

Here's my problem, that continues with newly created folders. You can see that this folder has 5 items in it, with one selected. But they are not visible when Finder is set to icon mode.
Also, when I drag a corner of the Finder window to make it bigger, i get some "dragging" visual artifacts that are not visible in the screenshots but appear on my screen.

Section not visible in the report painter

Hi Gurus,
I created a report painter report for showing the P&L statement for a company code. I had to added a new section for calculating the statistical key figures. I was able to display the 2 sections initially, but later after changing some layout the keyfigures section is not visible anymore.
Please let me know how can I retrieve the Key figures section.
Thanks

Hi Christian,
And if you execute the report you don't see the second section?
Yes, I am able to see the section in the edit mode and not when execute the report.
In the report layout "formatting / report layout" in the area "rows / treatment of zero rows" are the rows hidden if the value is zero?
The standard section layout has zero rows hidden. I tried changing it to print zero rows, but that didn't help.
Maybe you have a selection where you only have zero values in this section so it does not appear?
I was able to see the section in execute mode once, but then I tried to change the layout which caused me this problem. Please let me know if you have any other inputs.

Dashboard data not visible for the users - buffer issue?

It occurred several times last weeks that some out of 7 dashboards are not visible to the Dashboard users.
The scenario is the same all the time: users fills in the data, reviews it and posts some comments. Next morning the user canu2019t see the data in the system.
What can be the problem?

Hi,
IF your Company has NEtweaver License and the SAPNET User has access right to download section, you must be able to add SP Stacks to Download Basket.
If you have license and use have access, then please contact with local SAP Subsdiary for this problem.
But to be able to download some patches, you must have Solution Manager & Maintanance Optimizer to approve the items in basket.

Some OSX folders under bootcamp (Win7) not visible - why?

Similar Messages

Maybe you are looking for