Some pages no longer load using WIFI...

Hello,
I just started noticing this issue with my iPhone last week. My home wifi connection shows full strength but for some reason, some web pages that I frequently visit will no longer fully load. Safari shows about less than 1/4 load and will then stop and hang. These pages used to load with no problem. I get the same problems with youtube where videos will load about half and then stop and there is nothing I can do to have it finish. I downloaded a speedtest app and I get consistent 6-8mbs download speed but I am not sure if the packet is large enough to invoke the issue. On 3G, I have no issues. Pages and videos all load as expected. I am tempted to try a new router but I have no issues on my MBP. Orb used to work perfectly and now all I get are timeouts. Has anyone else experienced this? Thanks.

This is what D-Link advised - for what it is worth
You may need to lower the MTU (Maximum Transmission Unit) value on your network card or/and on your router. MTU can be changed to accommodate fragmentation of packets; specially encoded packets with secured data can be too large for the current MTU and cause too much fragmentation. Changing MTU on the router alone may not resolve the issue, in this case proceed with changing MTU on your computer's Network Adapter.
Changing MTU on router
Step 1. Log into your router by open your Internet browser (e.g. Internet Explorer), enter the IP address of your router (e.g. 192.168.0.1) and press Enter. Specify username (admin) and password (blank by default) to log into the router.
Step 2. Click on the Setup tab and click on Internet on the left side. Then click on the 'Manual Configure' button.
Step 3. Look for the MTU field (note that it may not be available in some router models). The default MTU value is 1500, change it to lower number, e.g. 1200.
Step 4. Test your ability to connect to those specific sites youre having trouble with. If changing the MTU rate to 1200 does not resolve the problem, start lowering it in increments of ten until the problem is resolved (you may need to go as low as 600 depending on your Internet connection).
Changing MTU on computer
To lower the MTU size on your computer you can use utilities like Dr.TCP or TCP Optimizer. Alternatively you can follow the steps in this document: http://files.dlink.com.au/Products/!Routers/MTU_Win2K.XP.pdf

Similar Messages

After upgrading to Mavericks, some websites won't load (using wifi)?

Hey guys,
I upgraded my Macbook Pro to Mavericks last December. I had some problems when loading some websites (such as eBay, Society6, etc) while I was at home using my home wifi in Indonesia. It's like, sometimes these websites won't load, but sometimes they do.
I've tried different browsers and it's still the same. I thought, it was just the wifi at my home in Indonesia that's problematic, because at work (using cable), the internet's just fine. But THEN, I am now here in Australia, I don't usually have problems with my aprtment's wifi at all, but now it's doing that thing. Some websites won't load properly or won't load at all. I realized that this is most likely has something to do with my laptop (ie. upgrading to Mavericks. I've never had this problem before), because the wifi works just fine with my smartphone and my iPod.
Has anyone encountered similar problem? How do you fix this?
Thanks so much,
S

Hello sharlegit
Try creating a new network location and test to see if the same thing happens of certain websites not working.
OS X Mavericks: Add a network location
http://support.apple.com/kb/PH13788
Regards,
-Norm G.

I can make a WiFi connection but pages will not load. WiFi works for a laptop using windows

I can make a WiFi connection but pages will not load. WiFi works ok on a laptop using Windows. I have reset the WiFi settings but this makes no difference.

Thanks, Linc, but that almost helped:
Because the retina 15 only has a wifi connection (no ethernet), that's the connection I'm stuck with for the notebook. But on the 27iMac, I did have both ethernet and wifi enabled. When I turned the wifi off on the 27, therer was a brief moment when both computers were showing their counterparts when I tried to make a network connection. BUT, after a few seconds of 'searching', the computer I was trying to connect to disappeared from the Network list.
So I tried the opposite; the retina can only connect thru wifi, so that's a given. I swithched my ethernet off and then enabed the wifi on the 27 and ....same thing: When I try a network connection, there are a few seconds of 'searching', then the ony option I'm left with is share screen, which doesn't work either.
I've read the 'dropped' network is a problem with the retina, but the odd thing is that I never lose my internet connection—that continues to work fine, as does Air Drop—but I can't seem to connect, network-wise.
Any ideas about the dropped network?

I have some web pages that loaded completely when using 3G but partially loaded using Wifi.

I have some web pages that loaded completely when using 3G but partially loaded (only text without any images ) using Wifi. Is it a site specific issue?

Can you rule out the NoScript extension as a cause of the issues on those sites? Even if you allow the main site to run scripts, often a website will spread its content over additional servers, so you may need to visit the "S" button menu a second or third time to get full functionality. (Over time, you'll recognize some the servers as being for ads, tracking, or sharing buttons and you can just let those parts of the page not work.)

I can no longer print using wifi. I have to connect a USB cable to print. Setup and pref show that I should be able to print wireless but I keep getting printer not found msg when trying.

I can no longer print via wifi. I could at one time but now I have to connect to printer with USB. All settings appear correct in printer and macbook. Sys pref shows printer with green light next to idle. Sending a print prompt results in "searching for printer, printer not found, ensure printer is turned on". I have reinstalled printer in my print list and reinstalled printer software on macbook. Kodak 5250 AiO printer shows it's configured for and on wifi channel. I go online with laptop using wireless but cannot print. Help!

If you know the IP address of the printer, then you can check if there is a working path between the Mac and printer. This can be done using Network Utility or a web browser.
If you open Network Utility and select the Ping tab, you can enter the IP address of the Kodak and then press the Ping button. If there is a working connection then you should get a reply to each packet sent.
With the web browser, many devices have a built-in web server so you can type the IP address of the printer into the browser and if there is a working connection then you will open the printers web page.
So, are you able to confirm you have a working connection between the Mac and printer?

Javascript causing some pages to stop loading mid-way in Safari 3.04

I am having problems with Safari 3.04 which stops loading some pages mid -way when I have javascript enabled. I am running 10.4.11 tiger. I tried resetting safari and empty cache. I also ran Oxyx and cleared cache with it.
Is javascript a separate program that I could reload> Do I need to reload Safari? If so, how do I do that?

It would seem that Apple has messed up the javascript implementation in 10.4.11/3.0.4. I think it is more a 3.0.4 issue as there are a number of folks reporting crashes using 3.0.4 on leopard. Looks like us poor schmucks who are either to cheap or are not brave enough to be early adopters actually win. While the prize in this case is less than stellar is still beats a hard crash....
<rant>
One would like to think that apple has enough common sense to post a thread indicating that
1) they acknowledge the problem.
2) they are working on it.
As it is they seem to be behaving more and more like microsnot with every patch they release. I guess if you don't have an iPod or iTV or god forbid an iPhone your $3K investment just doesn't count as much.
</rant>

Wi-fi login page no longer loads in Safari: can't join network

We have paid wi-fi in our apt building. My Mac Mini gets on fine: I pick the network from the AirPort menubar drop-down, launch Safari, the login page comes up, I enter my name & password and that's it. My MBP used to do the same. Now, I can still pick the network in the menubar drop-down, launch Safari, type some crap in the Google box, but the blue progress line only makes it to the "p" in the "http://www.google..." string. I dumped my /Library/SystemConfiguration folder and replaced it with the one from TimeMachine (and, yes, I did a cold shutdown to prevent "com.apple.network.identification.plist" from being overwritten by the "bad" settings in RAM).
Has this ever happened to anyone else? What do I delete, reinstall, or otherwise do?

I cannot get to the point of logging in.
Normally, after selecting my apt's network, Safari will automatically load the wi-fi's login page. This can be hurried, as you know, by typing crap in the Google field and hitting return.
Suddenly, this page is not loading anymore on my MBP: the light-blue progress bar only makes it to the "p" in the "http://www.google..." string.
It's not the wi-fi's fault: here I type to you on my Mini.

After upgrade to 22.0 when sidebar is open, some pages no longer fit in window like in version 19.

After seeing suggestions I tried adjusting the about.config CSS setting from -1 to 1, etc. But this just changes the size of all pages. Not a fix because some pages are okay to begin with, so they don't need shrinking. All Pages seem to fit until I open the bookmark sidebar. Then about half of the pages I visit (facebook for example) don't fit on the page & I have to scroll back & forth horizontally to read them. Other pages (http://www.ric.edu/ for example) fit the window perfectly.

If web pages needs to be adjusted after changing this pref then you can look at the Default FullZoom Level or NoSquint extension.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
Use this extension to adjust the font size for the user interface:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

Xml pages won't load using latest Firefox 7, worked fine in earlier versions

A web app that loads and displays xml files using javascript and xsl stylesheets is breaking since upgrading to Firefox 7.
These pages load successfully using Firefox 3 and 4, and all versions of IE.
I can't figure out why, bit it breaks when returning to pages that have already been successfully loaded.
Error console shows:
"Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIDOMXMLDocument.load] ... data: no"
but this is occurring for a file that had been successfully loaded previously.
Additional info:
I am getting the following warning for pages that do load successfully:
Warning: Use of Document.load() is deprecated. To upgrade your code, use the DOM XMLHttpRequest object.
I know I will need to deal with this issue sometime in the near future, but the structure of the data means that I need to load stylesheets from a directory above the directory containing the xml data being loaded, and the security features of XMLHttpRequest won't allow this. So a move to using XMLHttpRequest means restructuring the data, which is a major overhaul.

A good place to ask advice about web development is at the mozillaZine Web Development/Standards Evangelism forum. 
The helpers at that forum are more knowledgeable about web development issues. 
You need to register at the mozillaZine forum site in order to post at that forum. 
See http://forums.mozillazine.org/viewforum.php?f=25

Some webpage cannot be loaded, but the same page can be loaded using other browser like safari, IE

I am browsing some local website about properties. When I browse pages with pictures, it cannot be loaded. It was stated in the bottom left corner of the browser that data was being transferred, but it was not true. This problem occurs when I updated the browser version to 4.0. I am fine with the old Firefox version. Thanks.

I am browsing some local website about properties. When I browse pages with pictures, it cannot be loaded. It was stated in the bottom left corner of the browser that data was being transferred, but it was not true. This problem occurs when I updated the browser version to 4.0. I am fine with the old Firefox version. Thanks.

Some pages won't load in browser, keep looping

I’ve just finished loading all of my content for a new site onto my remote server. The index page works fine, and some of the pages will load, but most of the pages just keep flashing, as if the browser keeps trying to re-load the page over and over again. I'm using IE8.
When I check browser compatibility in Dreamweaver CS3, the errors I get are:
Unsupported property: zoom
Unsupported value: 'inline block'
Any idea what could be causing this?

Without seeing the actual web page live, it can only be a guessing game.
How to get help quickly
The answer is always in the code and viewing it will enable people to help you troubleshoot.
Nadia
Adobe® Community Expert : Dreamweaver
http://twitter.com/nadiap
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
http://csstemplates.com.au/

Disney Jr coloring pages will not load using Firefox on my iMac, using Safari the pages will load.

I have a Apple iMac desktop computer that is about a year old, when using Firefox to access the Disney Jr. website the only problem I have is the pages that need to be printed to color will not load, the rest of the site works as it should. When I use Safari to access the same website there are no problems, I prefer to use Firefox as my browser of choice.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

After Firefox update,some pages don't load the css + some google features and services do not work , what should i do?

I have recently performed the Firefox update to the latest. Since services from google.com such as youtube does not load properly, appears to be missing the css of it . Other problem that i have also encountered is that when I try to access my gmail account(already logged in), the loading bar is frozen at 0 % as if the JavaScript was not working fully. Please reply to me with a procedure of how to get the problem sorted.Thanks in advance
Jakub

Check the date and time in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
*https://support.mozilla.org/kb/Secure+Connection+Failed
You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

MSNBC Pages no longer loading

In the past two or three days, I can't get any pages from MSNBC to load. They either partially load with just text or don't load at all. In Firefox and Chrome, all of MSNBC works fine. I'm seeing this in Safari on both Mac and in Windows.
I suspect this is another evil plot by Microsoft to increase it's browser market share, or at least to **** off Safari and Mac users.

HI,
Go to Safari/Preferences and select the Autfill tab. Click the Edit button next to User names and passwords. Delete msnbc.com and click Done.
Relaunch Safari.
FYI... I responded to your other post here...
Safari Stops Responding
Carolyn
Message was edited by: Carolyn Samit

Unless I am in private browsing mode some pages won't load properly. Data is moved and pictures located in strange places. Did a setting get changed? And if so, where do I go to change it back?

Unless I am in private browsing mode my home page, statesmanjournal.com, and a number of other pages come up 'jumbled' with wording all over the place and pictures out of place. This just started happening yesterday. My laptop is ok with firefox, only desktop effected.

Hi,
Please also try deleting the cache and cookies in normal mode: '''Tools''' ('''Alt''' + '''T''') > '''Clear Recent History''', choose '''Everything''' in '''Time range to clear''', '''Cookies''' and '''Cache''' in '''Details''' and '''Clear Now'''. [https://support.mozilla.org/en-US/kb/Clear%20Recent%20History Clear Recent History]

Some pages no longer load using WIFI...

Similar Messages

Maybe you are looking for