Some Partner Object & Partner Object Type were missing

Dear All,
I am using standard extractor 0CO_OM_CCA_1 to loading from R/3, however I found that some Partner Object and Partner Object Type were missing, so that I can't get the full dataset from R/3.
Can anybody help.
Thanks
Best & Regards.
Pong

Hi
After we split budget and actual data in two cubes we have the same issue with 0CO_OM_CCA_1. I can see that the Partner Object and Partner Object Type is missing in the PSA table.
Did you find an answer?
br,
John

Similar Messages

Partner bank type field missing in payment proposal list

Hi Gurus,
       The partner bank type field is not being displayed in payment proposal list whereas I can display the same in vendor line item display. Though there is a field named BnkT in the proposal list the partner bank type is not displayed. Kindly advice me in this regard.
Regards.

Hello,
Please note the system selects the bank with the lowest BVTYP.
This means that a bank which has no BVTYP will be selected first,
then one with AAAA, then BBBB. This is the reason why the partner
bank which you expected was not chosen.
Please read the F1 help for this field which explains the main purpos
of this field:
F1 Help:
In the business partner's master record:
     If several bank accounts exist in a customer or vendor master
     record, you can assign different keys for these accounts.
In the item:
     To use a particular bank of the business partner for the payment
     an item, enter the appropriate key in the item. The payment prog
     then pays the item via the business partner's predefined bank.
Here you can enter, for example a number, 0001.
Then, when you post a document with the transaction FB01 or F-42, you
can display the field 'Partner bank type' (BSEG-BVTYP). Here you can
write the number 0001 or another number for another bank of the same
vendor. Afterwards, you can post this document.
Also, you can use Business Transaction Event (Open-FI) 00001810 to
implement your own algorithm to select a bank. For details, see the
documentation of the sample function module SAMPLE_PROCESS_00001810.
Also review below notes in the same context about "F110: partner bank
type".
363219 - F110: Wrong partner bank after proposal run maintnc
390740 - F110: partner bank type not in clearing line of payment doc
Hope this clarifies the system behaviour.
regards
Ray

Recently I went to my iphoto library and noticed that some of my albums of photos were missing. Any help appreciated, Recently I went to my iphoto library and noticed that some of my albums of photos were missing. Any help appreciated

Recently I visited my iphoto library and noticed that photos were missing and several Albums. Any advice would be appreciated.
I'm running OS 10.6.7 on a Mac Book Pro

What version of iPhoto are you running? Any other items missing from the library?
You can try the following (assuming iPhoto 11): make a temporary, duplicate copy of the library and try the three fixes below in order as needed:
Fix #1
delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
delete iPhoto's cache files that are located in your Home/Library/Caches/com.apple.iPhoto folder.
reboot, launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library.
Select options #1, #2 and #6.
Fix #3
Rebuild the library using iPhoto Library Manager as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Reader for Android SOM Doc Object missing certain properties and methods

I have found, much to my chagrin, that although Adobe Reader for Android pretends to allow the filling of forms, the Scripting Object Model is missing essential pieces that have been present in the desktop version for many years. Among these are the Doc object's numFields property and getNthFieldName() method. I find this rather odd since the Doc object's getField() method is fully present and functional.
Basically, I am now finding that time-tested, reasonably simple, forms that worked perfectly on the desktop are broken.
If the Adobe Reader for Android can't provide forms functionality (including basic scripting) that is comparable to the desktop, it shouldn't pretend to allow this at all.
Isn't one of the goals of Adobe Reader to provide a consistent user experience across platforms?
Who would have expected that in the Android product you could get a field by name but not enumerate fields? Guesswork should not come into play here.
Question:
Is there at least some sort of proper documentation for the limited subset of SOM supported by Reader for Android?

Update: I've been able to make progress with the first route mentioned above: adding the mobilecomponents.swc and the mobile.swc theme to my web project
Turns out that Flash Builder had led me wrong in this regard. Adding the mobile SWCs to your Library project with the "merged into code" setting results in the compiler warning:
The swc '/Applications/Adobe Flash Builder 4.6/sdks/4.6.0/frameworks/themes/Mobile/mobile.swc' has style defaults and is in the library-path, which means dependencies will be linked in without the styles. This can cause applications, which use the output swc, to have missing skins. The swc should be put in the external-library-path.
Seeing this the first time, I changed my linkage type to "External" and the warning went away. Then in my web project, I also added the mobile SWCs and set the linkage type to "merged into code" there. Flash Builder seemed happy with that approach, but upon running my application I got bizarre runtime errors (as mentioned above).
Turns out that my first attempt was the correct way. Set the linkage type on the library project to "merged into code" and then don't re-link from your web project. Flash Builder will warn you about it but ignore the warning. Things seem to work pretty well for the most part now! I have an issue or two to look into (ex. List component doens't scroll) but things look pretty promising overall!

Option 'Maintenance Order' missing in 'Allowed Object Types' tab in IMG of User status Profiles

Dear All
I have created a User Profile using T-Code OIBS.
Now I want to assign that User Profile to Maintenance Order. But in the 'Allowed Object Types' tab, the option "Maintenance Order" is missing due to which I am unable to assign it to Maintenance Order.
Could anyone tell how to add the option "Maintenance Order" in 'Object Types'.
Thanks in advance.
BK

Hi Peter
Thanks for your help.
I just found that in t-code BS13, the object categories ORI and ORH exist but 'No Status Profile' check is marked against them. That is the reason why the system is not showing the 'Maintenance Order' as an option in Allowed Object Types.
Thanks a lot !
Best Regards,
BK

Some SLD Objects missing in the target SLD environment

HI All,
Sometimes while doing SLD transport via CTS+ (PI 7.0 SP18), it is observed that some technical systems or business systems are missing in the target SLD Environment.
I have checked and objects are present in the request and if it is re-imported few more times, the missing objects gets visible.
The related Business Systems and Technical systems are sent over in one request only.
Does anybody has any explanation to this behavior?

Hi All,
Found the explanation for this issue in below notes:
1. Note 1087706 - SLD namespace remains locked against changes for a long time
2. Note 1087704 - Locking entire SLD namespace during import
regards Anirudh.

Need to export Missing object type called "TYPE" Please Help

I did a referesh of one of the schema, I could see the difference between the source and destination schema object count.
but object type is "TYPE" , where the difference lies.
Three TYPE kind of objects are extra found in production which have not been imported to dest db.
Could you please help me how can i take export of those object types and import the same in dest.
For reference: Missing objects in destination schema
OBJECT_NAME OBJECT_TYPE
SYS_PLSQL_88116_DUMMY_1 TYPE
SYS_PLSQL_88116_481_1 TYPE
SYS_PLSQL_88116_433_1 TYPE

Sir I have already tried that, but couldnt succeed.
For reference: The 19 type which are imported successfully out of 22, the DDL is acheived, but when I tried to get the ddl of rest three from production it throws error, like not found in schema, even i tried to get it from sys schema, but same error..
The one which is imported properly
=========================
SQL> select dbms_metadata.get_ddl('TYPE','XRATE_TABLE_TYPE','TKCSOWNER') FROM DUAL;
DBMS_METADATA.GET_DDL('TYPE','XRATE_TABLE_TYPE','TKCSOWNER')
CREATE OR REPLACE TYPE "TKCSOWNER"."XRATE_TABLE_TYPE" IS TABLE OF XRATE_RECORD
The one which is not imported:
==================
SQL> select dbms_metadata.get_ddl('TYPE','SYS_PLSQL_88116_DUMMY_1','TKCSOWNER') FROM DUAL;
ERROR:
ORA-31603: object "SYS_PLSQL_88116_DUMMY_1" of type TYPE not found in schema
"TKCSOWNER"
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA", line 3241
ORA-06512: at "SYS.DBMS_METADATA", line 4812
ORA-06512: at line 1
no rows selected

Partner bank type missing in custmer invoice.

Dear Experts:
I want to netting vendor and customer invoice usting F110. (The vendor is also the customer)
Partner bank type should be the same so that these data can be groupped together when netting.
But the Vendor invoices have the partner bank type while the customer invoices which are generated from SD module don't have the partner bank type. Is it possible to configure the Partner bank type in SD module?
Thanks!
Edited by: Qilan Wang on Jul 13, 2010 9:59 AM

Hi,
It is not directly possible to get it from the SD. But you can use the BTE concept to have this option. BTE : Business Transaction Event - search in the forum for details.
VVR

Need some help on procedure calling procedure using object type reg

dear all,
i need to test one procedure by passing only one value but how do i pass single value. i am showing the details of few section on which i am working on. here is few details about the package.
Description: package pkj_emp contains two procedure pkj_emp and procedure proc_rem.
purpose:based on passing dname values to procedure pkj_emp, cursor cur_emp will fetch empid from emp table and then we are passing 4 empid records to procedure proc_rem using empid object type.Inside the procedure proc_rem it will delete all 4 records of table A,B,C and D at one short.
Requirement:i need to test for only one value that means is it possible i can pass only one value using the cursor cur_emp.
create or replace package pkj_emp
TYPE obj_emp IS TABLE OF NUMBER INDEX BY BINARY_INTEGER;
procedure proc_emp(empid obj_emp);
create or replace package body pkj_emp
as
procedure(
dname varchar2;
as
cursor cur_emp is select emp_id from emp a,dept d
where a.deptid=d.deptid
and d.deptname=dname;
begin
count:=0;
               for cur_emp_rec in cur_emp LOOP
               empid(count) := cur_emp_rec.emp_id;
          IF (count = 4) THEN
               proc_rem(empid); // calling another procedure
               commit;
               END IF;
               count := count + 1;
               END LOOP;
end;
proc_rem(
empid obj_emp;
is
begin
delete from A where emp_id in (empid(0),empid(1),empid(2),empid(3));
delete from B where emp_id in (empid(0),empid(1),empid(2),empid(3));
delete from c where emp_id in (empid(0),empid(1),empid(2),empid(3));
delete from d where emp_id in (empid(0),empid(1),empid(2),empid(3));
end;
regards
Laxman

You have hardcoded your IN LIST in the REM procedure. I recommend changing the code to take a variable number of inputs. You could do something like the following:
SQL> CREATE TABLE A (ID NUMBER);
Table created.
SQL> CREATE TABLE B (ID NUMBER);
Table created.
SQL> CREATE TABLE C (ID NUMBER);
Table created.
SQL> CREATE TABLE D (ID NUMBER);
Table created.
SQL> INSERT INTO A VALUES(7566);
1 row created.
SQL> INSERT INTO B VALUES(7902);
1 row created.
SQL> INSERT INTO C VALUES(7876);
1 row created.
SQL> INSERT INTO D VALUES(7369);
1 row created.
SQL> CREATE OR REPLACE TYPE EMP_TYPE AS TABLE OF NUMBER(4);
2 /
Type created.
SQL> CREATE OR REPLACE PACKAGE PKJ_EMP
2 AS
3          PROCEDURE PKJ_EMP
4          (
5                  DNAME   IN      SCOTT.EMP.DEPTNO%TYPE
6          );
7
8          PROCEDURE REM
9          (
10                  pEMPList IN      EMP_TYPE
11          );
12 END PKJ_EMP;
13 /
Package created.
SQL> CREATE OR REPLACE PACKAGE BODY PKJ_EMP
2 AS
3          PROCEDURE PKJ_EMP
4          (
5                  DNAME   IN      SCOTT.EMP.DEPTNO%TYPE
6          )
7          AS
8                  pEMPList        EMP_TYPE := EMP_TYPE();
9                  i               NUMBER := 1;
10          BEGIN
11                  FOR r IN
12                  (
13                          SELECT EMPNO
14                          FROM    SCOTT.EMP
15                          WHERE   DEPTNO = DNAME
16                  )
17                  LOOP
18                          pEMPList.EXTEND;
19                          pEMPList(i) := r.EMPNO;
20
21                          i := i + 1;
22                  END LOOP;
23
24                  REM(pEMPList);
25          END PKJ_EMP;
26
27          PROCEDURE REM
28          (
29                  pEMPList IN      EMP_TYPE
30          )
31          AS
32          BEGIN
33                  DELETE FROM A WHERE ID IN (SELECT   COLUMN_VALUE FROM TABLE(pEMPList));
34                  DELETE FROM B WHERE ID IN (SELECT   COLUMN_VALUE FROM TABLE(pEMPList));
35                  DELETE FROM C WHERE ID IN (SELECT   COLUMN_VALUE FROM TABLE(pEMPList));
36                  DELETE FROM D WHERE ID IN (SELECT   COLUMN_VALUE FROM TABLE(pEMPList));
37          END REM;
38 END PKJ_EMP;
39 /
Package body created.
SQL> EXEC PKJ_EMP.PKJ_EMP(20);
PL/SQL procedure successfully completed.
SQL> SELECT * FROM A;
no rows selected
SQL> SELECT * FROM B;
no rows selected
SQL> SELECT * FROM C;
no rows selected
SQL> SELECT * FROM D;
no rows selected
SQL> spool off;HTH!

Meaning of Partner Link Type, Partner Role, My Role

hi,
I am unable to get clearity about below terms, please explain me what does it means, I have also read developers guide.
Most of the time these values automatically gets selected but if I try to change it, I get confused
1.) Partner Link Type : Refers to the external service with which the BPEL process is to interface
2.) Partner Role : Refers to the role of the external source
3.) My Role : Refers to role of the BPEL process in this interaction
please explain with some example.
thanks
Yatan

Proper outbound plug configuration solves the issue. Object to be used should be BP_ACCOUNT

Partner application configuration is missing error on SSO login page

We have APEX 3.1.2 setup as a partner application and an application within APEX setup to use SSO for authentication. Following a link to the APEX application redirects to the Single Sign-On page, as it should, but it also shows "Error: The partner application configuration is missing or expired." I type in my password and username, click the Login button, and (if I entered my username and password correctly, of course!) then the APEX application is shown. So, I cannot figure out why we're getting the no_papp_err error and I have not found any solutions to that issue on Metalink or anywhere else on the Internet. Any ideas? I'm concerned that we have a misconfiguration somewhere that is causing this error and will affect any other partner application we setup in the future.
We're on Oracle Portal 10.1.4, SSO 10.1.2, and SSL is setup on both infra and mid tiers.

Did you try checking the partner application entries on the SSO-login server page?
please login as orcladmin or some other user with membership in, i beleive, iasadmins group. verify that for this partner application, what you see here corresponds to the application URL. it looks like your login page call may have issues. so check for login url too.
also check the ORASSO.WWSSO_LS_CONFIGURATION_INFO$ for entries corresponding to Apex application.

Error: Partner application configuration is missing ... on SSO login page

We have APEX 3.1.2 setup as a partner application and an application within APEX setup to use SSO for authentication. Going to the APEX application redirects to the Single Sign-On page, as it should, but it also shows "Error: The partner application configuration is missing or expired." I type in my password and username, click the Login button, and (if I entered my username and password correctly), it redirects me to the APEX application just like it should. So, I cannot figure out why we're getting the no_papp_err error and I have not found any solutions to that issue on metalink or anywhere else on the Internet. Any ideas?
We're on Oracle Portal 10.1.4, SSO 10.1.2, and SSL is setup for both.
+Closing this topic and opening it in [Oracle Application Server - General|http://forums.oracle.com/forums/thread.jspa?threadID=832022&tstart=0|New Topic]+
Edited by: oportalist on Nov 28, 2008 10:24 AM

Did you try checking the partner application entries on the SSO-login server page?
please login as orcladmin or some other user with membership in, i beleive, iasadmins group. verify that for this partner application, what you see here corresponds to the application URL. it looks like your login page call may have issues. so check for login url too.
also check the ORASSO.WWSSO_LS_CONFIGURATION_INFO$ for entries corresponding to Apex application.

Creating PL/SQL web services from object types

Hello
Jdeveloper, pl/sql web-services working successfully with object types.If we want to send the web-services to the client, do we need to send the entire folder that is created in the web-services folder of the external oc4j..?
Creating the client process:
we are using the wsdl file that is generated in the web-services and adding to the partner link to Invoke the operations of web-services. Is there any other way to invoke the webservices?Could any one please suggest me?
Thanking you
Malathi

Hello
Accessing the pl/sql webservices from the application server:
I have created pl/sql webservice using the nested tables. This will insert the object data into database tables.after deplying the webservice into external oc4j, when I test the webservice locally with url: http://localmachine:8888/PL_SQL_WS-Nest_Obj_Webservice-context-root/ObjWebserviceSoapHttpPort
The above web-services working and I am able to insert into the database tables.
Same when I want to access through the application server, I have changed the wsdl file soap address as
<soap:address location="http://10.91.20.7:8888/PL_SQL_WS-Nest_Obj_Webservice-context-root/ObjWebserviceSoapHttpPort"/>
When I access this url, I am able to give the input data
http://10.91.20.7:8888/PL_SQL_WS-Nest_Obj_Webservice-context-root/ObjWebserviceSoapHttpPort
but the out from the web-service is:
<env:Envelope
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<env:Fault
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>env:Server</faultcode>
<faultstring>Error creating target: DBConnImpMftest.ObjWebserviceUser</faultstring>
<faultactor/>
</env:Fault>
</env:Body>
</env:Envelope>
Err from the OC4j log:<PAYLOAD>
<MSG_TEXT>An error occurred for port: {http://dbconnimpmftest/Nested_Webserv.wsdl}Nested_WebservSoapHttpPort: javax.xml.rpc.JAXRPCException: Error creating target: dbconnimpmftest.Nested_WebservUser.</MSG_TEXT>
</PAYLOAD>
Could any one help me to solve the above issue?
Kind regards
Malathi

Require help on Array of Nested tables and Oracle Object type

Hi All,
I have a scenario where I have some millions of records received from a flat file and the record is stored in Table as below:
Tablename: FILE_RECORD
Rows:
FILE_REG_ID = 1
RECORD_NBR = 1
PROCESSED_IND = U
RECORD= 00120130326006A
FILE_REG_ID = 1
RECORD_NBR = 2
PROCESSED_IND = U
RECORD= 00120130326003
1) I have to read these records at once and
a) Split the RECORD column to get various other data Eg: Fld1=001, Fld2=20130326, Fld3 = 003
b) send as an Array to Java.
2) Java will format this into XML and sent to other application.
3) The other application returns a response as Successful or Failure to Java in XML
4) Java will send RECORD_NBR and the corresponding response as Success or Failure back to PLSQL
5) PLSQL should match the RECORD_NBR and update the PROCESSED_IND = P.
I 'm able to achieve this using SQL Table type by creating a TYPE for Each of the fields (Flds) however the problem is Java cannot Access the parameters as the TYPE are of COLUMN Types
Eg: For RECORD_NBR
SUBTYPE t_record_nbr IS FILE_RECORD.T010_RECORD_NBR%TYPE;
Can you please let me know how I can achieve this to support Java, I know one way that is by creating an OBJECT TYPE and a TABLE of the OBJECT TYPE.
Eg: T_FILE_RECORD_REC IS OBJECT
FILE_REG_ID number(8), RECORD_NBR number (10), PROCESSED_IND varchar2(1), RECORD varchar(20)
Create type T_FILE_RECORD_TAB IS TABLE OF T_FILE_RECORD_REC
However I'm facing a problem to populate an Array of records, I know I'm missing something important. Hence please help.
It would be helpful to provide some guidelines and suggestions or Pseudo or a Code to achieve this. Rest all I can take up further.
Thanks in advance,

I know once way that is creating a OBJECT TYPE and a TABLE of OBJECT TYPE, howeve I feel I'm missing something to achieve this.You're right, you need SQL object types created at the database level. Java doesn't know about locally defined PL/SQL types
However you can do without all this by creating the XML directly in PL/SQL (steps 1+2) and passing the document to Java as XMLType or CLOB.
Are you processing the records one at a time?

BPM (IP) Error: "No object type found for this message [...]"

For your info.
I have searched SDN today for a solution to an error message found in XI message monitor (trx SXI_MONITOR) when sending a message to BPM:
<b>No object type found for this message; check the activation of the corresponding process</b>
Well, I found a lot of threads, but with no good answer for me.
So, here's my self-solution: I was just missing the Interface Determination (really don't know why) bringing from Outbound to Abstract message interface. So XI message was definitely correct.

Hi,
Make sure that the first receive step in your integratiopn process uses the abstract interface that u defin in the interface determination.
Also check if you have used all the objects that you have created. Some times 'No object type found' error happens if your BPM is not activated.
Also check the activation log and see if there are any errors. Refrech the cache in SXI_CACHE. Check if the return code is 0.
Hope this helps.
Regards.
Praveen

Some Partner Object & Partner Object Type were missing

Similar Messages

Maybe you are looking for