Some PDF Document Fonts Are not Appearing Correctly.

To give an example, I am talking about this document. The image shows how it appears with my adobe reader, even though readers like evince or okular display it just fine. THe problem persists with several documents, but not all of them. So far I am not able to find a pattern.
My Adobe Reader version:  9.5.5
Platform: Linux mint petra

I am sorry, is there any way to edit the post? Alternatively, the screen shot can be viewed here.
https://dl.dropboxusercontent.com/u/34905464/Screenshot%20from%202014-04-13%2014%3A54%3A25 .png

Similar Messages

  • When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version?  (mostly Helvetica) where and how do I get those Fonts?  And/or, can I use the Mac version of these Fonts?

    When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version?  (mostly Helvetica) where and how do I get those Fonts?  And/or, can I use the Mac version of these Fonts?
    Thanks, Rich

    In order to be cross platform you must be using the Open Type version of all fonts to cause the least disruption. Macs can read and process the Windows .ttf  type format but PCs can't process Mac formatted type. Most recent versions also cannot use the older PS Type 1 fonts.

  • DPM 2012 R2 Backup job FAILED for some Hyper-v VMs and Some Hyper-v VMs are not appearing in the DPM

    DPM 2012 R2  Backup job FAILED for some Hyper-v VMs
    DPM encountered a retryable VSS error. (ID 30112 Details: VssError:The writer experienced a transient error.  If the backup process is retried,
    the error may not reoccur.
     (0x800423F3))
    All the vss Writers are in stable state
    Also Some Hyper-v VMs are not appearing in the DPM 2012 R2 Console When I try to create the Protection Group please note that they are not part of cluster.
    Host is 2012 R2 and The VM is also 2012 R2.

    Hi,
    What update rollup are you running on the DPM 2012 R2 server ?  DPM 2012 R2 UR5 introduced a new refresh feature that will re-enumerate data sources on an individual protected server.
    Check for VSS errors inside the guests that are having problems being backed up.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • When printing Gantt chart, some of the bars are not appearing in it

    When printing Gantt chart, some of the bars are not appearing in it
    I have added print tag in xml of chart mode-multiple pages.
    <print mode="MultiPage" print_all_columns="true" />
    For printing, I right ckicked on chart and clicked on Print chart..
    Edited by: Sheetal on Mar 29, 2012 2:46 AM
    Edited by: Sheetal on Mar 29, 2012 2:51 AM
    Edited by: Sheetal on Mar 29, 2012 2:56 AM

    Sheetal,
    Did you ever find a reason as to why the bars were not printing? I'm experiencing the same problem with Apex 4.1.1. Only the first part prints. Here is the print tag:
    <print mode="MultiPage" print_all_columns="true" columns_on_every_page="2" fit_timescale_to_end_of_page="false">
    I've changed some of these settings to no avail.
    -Seth.

  • Some fonts are not shown correctly in LabVIEW 2012

    I found a bug related with fonts in LabVIEW2012 f3 KR.
    - When I select NI7SEG in font selection dialog, right font is not shown in the example box.
    - Draw text at point.vi shows same problem for some fonts while other fonts are working.
    I reported it to Korean NI. As far as I know, this was not reported in previous versions and I couldn't find any related documents in Google. 
    So, here I would like to know whether it is related with only Korean version. Please let me know if English version is OK. 
    * OS: Windows 7 32bit KR

    Just now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
    - Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
    - LabVIEW 2010 but on same PC shows correct fonts.
    Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
    (1st group)
    Arial Unicode MS...
    Bookshelf Symbol 3....
    Windings 3
    (2nd group)
    @Arial Unicode MS...
    @Terminal
    (3rd group)
    Arial...
    Consolas...
    Courier...  
    Licida Console... 
    NI7SEG...
    Verdana

  • Fonts are not displaying correctly in certain apps

    Some of my fonts are appearing much higher within UI elements than they should be. Any ideas?

    I doubt this is a hardware issue – hardware issues are agnostic of specific characters, as this is the case it seems:
    There's no 'c' or 't' not corrupted and on the other hand – it seems – no corrupted 'd's.
    Have you just tried setting the font to something different?

  • Tab Strips are not appearing correctly

    Hi all,
    We are using SAP Portal 7.3 and we are using Custom theme. The tabstrips are not appearing properly (half broken).
    I have tried changing the properties "Background color of selected tab" , "Background color of non-selected tab" and others in theme editor but this is not solving my issue.
    Any help would be highly appreciated.
    Thanks
    Harshmeet

    Hey,
    Thanks for the reply. PFA the screen shot
    This is how it is appearing, somewhat broken and some space below the tabs.
    Thanks
    Harshmeet

  • My fonts are not working correctly

    Hello guys,
    I noticed today that most of my added fonts are not working. I use a lot of fonts that have a cyrillic subset which were working perfectly fine till 2 days ago. Now when I select a text field and try to change the font face to one of the added fonts, it changes the font face to whichever the default font is and renders the font selection menu to blank. I am really puzzled, the fonts are installed in the Fonts folder in Windows, and they were working perfectly fine till a couple of days ago. I havent installed any Fireworks or Windows updates in the meantime. I am working in Fireworks CS5.
    Cheers

    I wasn't sure about my shut-down-and-restart suggestion, but I still think it might be a good idea to clear the font caches.  Here are a couple links on clearing font caches for Windows and Adobe apps:
    http://www.ehow.com/how_7197467_rebuild-font-cache.html
    http://www.illustratorhints.com/2010/05/cleaning-your-font-cache/
    You might want to supplement this with some research of your own, then give it a try.

  • Some of the orders are not appearing in KOC4

    Hi,
    While running the trnasaction KOC4, Some orders are not appearing.which are appearing in KKBC_ORD.
    Please guide me how to get the same in KOC4.
    Thanking you in anticipation.
    With regards
    Aniruddha

    Some pages may not have all the fields in the xml even though they are being shown on the UI.
    Possible reasons I can think of are:
    1) Beans are rendered dynamically through controller code
    2) Page is using regions or other pages by extending them. There is Extends property in Property Inspector and if filled, those attributes from the extended page can also be seen.
    3) Personalization to add elements on the page
    -- Thanks

  • Vietnamese fonts are not displayed correctly.

    The Vietnamese input program worked fine in the previous version but in version 4 the texts are not aligned correctly. See this http://i485.photobucket.com/albums/rr219/september17th/untitled-16.jpg
    The character set used is Composite Unicode and input method is VNI. I tried VN forum but no one care about it =.= Also this is the FF problem those texts displayed correctly in Chrome. Those posts are here http://www.tinhte.vn/tin-tuc-su-kien-10/hp-va-dell-cong-khai-chi-trich-ipad-2-cua-apple-644640/index15.html

    I also have this problem, hope this problem will be fixed in the next release. More info: http://vozforums.com/showpost.php?p=28008790&postcount=61

  • Firefox 5 some web sites fonts are not work.

    I try to visit this sinhala language web site using Firefox 5 latest version. Then that site not properly display (Fonts are not work). Then i again downloaded that web site fonts and install them. But again that web site not properly display.
    If i visit that web site using "Google Chrome" or "IE" i can view that web site properly. This problem only happen for Firefox 5. Older version Firefox 4 work properly with this site.
    This is that web site fonts download link -http://www.lankaenews.com/font/sinhala_tamil_fonts.zip

    You can set the pref gfx.downloadable_fonts.enabled to false on the about:config page to disable downloadable fonts and make Firefox use a locally installed font.
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    You can use the Filter bar at to top of the about:config page to locate a pref more easily.

  • Some words containing 'ti' are not copied correctly from PDF.

    After exporting my Pages doc to PDF, if I try to copy text and paste it into a browser window it replaces any ti in the word with the wrong characters (such as P, (), or A). This doesn't happen in the main body of the text but does happen with words in text boxes or in my bibliography. According to Adobe Reader, the fonts are being embedded.  Any thoughts or help would be greatly appreciated.
    Using the latest versions of OSX, Pages, and Endnote X7 (don't get me started on the whole Endnote thing... ugh!).

    Actually I did copy and paste from the Preview app and used Adobe Reader to check if the fonts were embedded. However, the reason this is an issue for me is because this error is problematic for creating accessible documents for those using screen readers. I found that Pages fails mightily in this regard and had to spend a lot of time in Adobe Acrobat Pro fixing the PDF.

  • Fonts are not diplayed correctly in the Crystal Report Viewer control

    Post Author: Farid
    CA Forum: General
    Hello,
    I have designed a report in the Crystal Reports XI Designer (version 11.5.3.417) using the default printer. When I view it through the preview mode of the Designer, fonts are displayed like expected using the default printer driver.
    Now, I view this same report at run time in the Crystal Report Viewer control on the same computer with the same default printer. Fonts appear then differently they were in the preview mode : sizes are differents and some texts are truncated. It seems that the default printer driver are not used.
    Can anybody tell me if this behaviour is normal ? If it is the case how should I do to display a report in the Report Viewer using the default printer driver like I have specified it in the Designer.

    Post Author: V361
    CA Forum: General
    You may want to select the "no Printer" option instead, this will force CR to use a higher resolution.  Look in page setup, printer options.

  • Font previews not appearing correctly in the character window after upgrading to Yosemite

    Hi,
    I’m having an issue with Illustrator CS5 since I upgraded to Yosemite. When I go to the character window to select fonts they are not displaying the names correctly or to put it a better way they’re not showing at all!
    When I scroll up and down the list only the highlighted (where the cursor is positioned) font name and preview will show up as expected, oh and a few random font names. (please see attached image, although strangely the highlighted area is showing blank on this screen grab)
    I had to update the Java in order to get this version of illustrator working on Yosemite, could there be a connection to that?
    Thanks in advance.

    Adgatez,
    I believe this may solve it:
    Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
    It was first presented in this post #15 by TheUlser:
    https://forums.adobe.com/message/6854594#6854594
    It may also depend on the monitor, as it appears from post #29 by Loncar in the same thread.

  • Some of my fonts are not showing in my browser, could it be due to font book?

    Hi
    All of a sudden I noticed two websites which I commonly use, not displaying some of its fonts correctly. At first I thought it was just the browsers fault, firefox to be specific, but after checking Safari. I found that Safari was displaying the fonts incorrect too. So then I thought, maybe I need to just update my os software. I updated my software and still the fonts aren't displaying properly.
    Now further research has lead me to think the problem lies within Font book. Prior to this issue i have never opened or tempered with font book or had any other font issues.
    I am running OS 10.6.8
    Verdana and arial are the problematic fonts. Any help would be a godsend.

    Looks like verdana is selected to 'off' in font book. Not sure if this could be the reason as to why i'm experiencing problems.

Maybe you are looking for