Some performance counter objects are not available for a 32-bit process on 64-bit versions of Windows Server 2012 standard

When we try to gather performance counter information for a 32-bit process on a 64-bit computer that is running Microsoft Windows Server 2012, all our performance counter objects are not available with 32 bit perfmon application (C:\Windows\SysWOW64\perfmon.exe)
I didn't notified any errors while registering our counter objects or while running Perfmon.exe
Note: Same counter objects are available and working fine with Windows Server 2008 R2.
for diagnostic our counters on WIN2012, ran command as follows:
cd c:\windows\sysWOW64
lodctr /Q
I am able to see all our counter objects on response and infact all were shown as enabled, as shown below
Appreciate quiclk response with solution or clues to diagnose it more details.
Thanks & Regards,
Sudhakar Rudra

Hi,
Thanks for your reply.
I hope you understood our problem.
same our system counter objects (ver x), we able to browse from Perfmon 32 bit app on Windows 7, Windows 2008 R2 (64bit) OS but not on Windows 2012.
I am able to see all counter objects registered as follows (same at HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\HMI Alarm Class\Performance,
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Services\HMI Alarm Class\Performance
and
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HMI Alarm Class\Performance)
Only difference I observed that "Disable Performance Counters" were set to 4 in Windows 2012 OS unlike other windows 7 64bit OS and there is no differnece for remaining all entires.
I tried setting that "Disable Performance Counters" value to "0", but some how they get reset to "4", no luck..
I think "Disable Performance Counters" value either "0", or "4", should not matter for browsing our counters with 32bit bit perfmon applicaiton.
Do you see any issues of registry entries. ?
On what basis perfomance monitor list few enabled counters?
How can we add our counters manually to perfomance monitor?

Similar Messages

Downloaded Evaluation Version of Windows Server 2012 Standard- install is asking for product key

I downloaded the evaluation version of Windows server 2012 standard from the Microsoft TechNet site.
When I try to install server 2012 as a new virtual, I'm prompted for the product key for server 2012.
I do not have the key. How do I get the key? Or, why is this happening on a evaluation version?
Does anyone out there have the key for Windows server 2012 standard evaluation version, or know where I can get it?
Thank you.
rhinoguy1

Hi rhinoguy1,
Please down load ISO from following website :
http://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error - Some objects are not available to your user profile...

Hello,
It is for BI 4.1 on Windows. We have a connection called CON1 pointing to DB1. It uses UNIV1 All reports were working fine and we were able to refresh it as well.
Now the CON1 is changed to point to DB2 and we are now getting following error - "Some objects are not available to your user profile. You cannot refresh this Query. See your Business Objects administrator to request rights".
If I create a new report using CON1 and the it works fine. Only the old reports are still causing issue on refresh. I tried with Admin account as well and same issue.
The CON1 is still CON1 and universe UNIV1 is still using CON1. Just the content was edited from DB1 to DB2 in CON1. If we create a new report then no issue.
Can anybody advice if something needs to compiled. Your help will be greatly appreciated.
Regards,
SS

Your old reports are still pointing to same connection. Remember the DSN has been pointed to use another Database. The records and entries will be different. In addition as the records or object mapping have changed for these reports. Hence this would be a very normal behaviour.
Create a new connection named CON2 or something like that to point DB1 as per your requirement. This way your original reports would work.

Ibooks top sellers & other books are not available for us to purchase in India.

Top seeling ibooks & other books within the ibooks store are not available for purchase in India except for some free classics.
When will the topselleing books within ibooks store be available for us to purchase?

No-one knows. It depends on when Apple decide to open an iBookstore for India.
In the mean time, you could create an Apple ID in the US store without a credit card and use iTunes gift cards to buy things. Gift cards are available on eBay. (I have never done this, but heard a number of reports from people who have and were happy with this approach.)
Michi.

HT203167 My movies will not download to my iPad. And I the downloads are not available for my computer. How do I cancel or get the movies to my iPad? I am on wifi and 3 g. Not happy

My movies will not download to my iPad. And the downloads are not available for my computer. How do I cancel or get the movies to my iPad? I am on wifi and 3 g. Not happy

Hi,
For all people struggling with connecting their iPad to their router, constantly getting 'Incorrect Password' even though you have entered the correct one - this may be your solution as it just resolved my issue.
In your router settings online (usually found at 198.168.1.1) change your security from WPA2 or WEP to WPA. For my iPad it for some reason only accepts WPA but now it is running without problems. Let me know if this helps.
Cheers.

New DSO data fields are not available for transformations in the upwardflow

Hello,
There are data flow from
many source DSOs -> Target DSO -> Final DSO.
Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
now new fields are added to the target DSO, final DSO and one of the source DSO.
When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
Have anyone faced such a problem?
any solutions to this?
- I cannot delete all the other transformations as this is too much work to do and there is no time for it.
Regards
Kannan

We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

Sharing Folio - Source .indd files are not available for this article

when sharing a folio, and opening it up in indesign 5.5 all articles say:
"Source .indd files are not available for this article"
What is the point of sharing if you can't change articles and update them?

Because you’re not sharing the InDesign files, you’re sharing the folio.
Pretty similar to sharing a PDF but not the source files.
That said, I’m working on a project with someone else and everything sits in a Dropbox folder. Only I can update the folios but my partner has access to the InDesign files.
Bob

Windows Server 2012 Standard - HP OfficeJet Pro 8600 Plus printer not working after promoting to Domain Controller / AD Services

An associate and myself installed the built-in drivers for the HP OfficeJet Pro 8600 Plus multi-function (network) printer on a Windows Server 2012 Standard server installation and everything worked fine whenever I want to print anything directly from the
Windows Server machine (there's a reason for this, so please understand that ;) ).
We were able to print without any problems from the Windows Server 2012 machine, using the drivers from Microsoft. Mainly, because HP has not listed any specific support for Windows Server 2012, only Windows Server 2008 R2, however, the drivers that
came with Windows 2012 seem to work very well.
PROBLEM: I later had to promote the Windows Server 2012 to a Domain Controller, and created the Active Directory configurations, even enabled the Print Services. After doing all of that, the HP printer will not print anything. It's like all print
requests directly from the Windows Server go to Nil.
Has anyone encountered a problem like this before? The only thing I can think of is that after perhaps something affected printing directly once we promoted the server to being a DC, and added other features / roles. I even tried installing the
HP drivers for Windows Server 2008 R2, and the results are still the same...nothing prints. Trust me, the printer is set as the Default Printer and even when choosing to print, we make sure the HP OfficeJet Pro is selected, and is on, as other Windows
Client PC's can print to it directly.
Does anyone have any suggestions we could try? Thanks in advance.

While it is quite a while since this was posted - I can concur a similar issue exists.
We have spent the better part of a day trying to work out why other HP printers work fine but our 8620 prints are not printing and going to Nil. The print server is hosted on a shared DC. Comparing to the initial posters details, for some reason
it seems to be most commonly related to the OfficeJet Pro 8600/8610/8620/8630 series printers.
I ended up doing a print server migration from the domain controller to stand alone host and all printers now work from a single server rather than a mix. Domain controller OSes varied from 2008, 2012, 2012 R2 (tested with multiple) and only after
all of those failed then tried a stand alone server os machine as a last resort which worked fine. Printing directly from Win 7 / 8 /8.1 clients to the IP always worked.

REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER

I am using a window 7 professional service pack 1 and I purchase REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER. but the seller did not send me any installation CD or instruction
on how to use it.
Please how can I use it on my window 7 professional service pack 1.
Thank you.

Though Bill is absolutely correct for most CALs, Remote Desktop Services does have its own special licensing server. I haven't installed one on 2012, yet, but here is a step-by-step guide for 2008.
http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
Here is a lab guide for 2012 -
http://technet.microsoft.com/en-us/library/jj134160.aspx
But, the explanation of your environment begs the question - what are you trying to do? You say you have a desktop OS and you are talking about Windows Server products. In that light, your question does not make a lot of sense.
. : | : . : | : . tim

Windows Server 2012 Standard - OS licensing for physical servers

Hi,
With Windows Server 2012 Standard, I can install the OS on up to two virtual machines.
For physical machines, how many physical servers can I install the OS on if I don't use any VMs?
Thanks

Hi,
Just to add, each license covers up to two physical processors. If you have more than two physical processors in a server, you need to assign additional licenses for it.
More information, please refer to the link below:
Windows Server and Processor Cores… (Part 2): Windows Server 2012
Best regards,
Susie

Windows Server 2012 Standard Scheduling for backup for multiple disk

Hi,
Iam using Windows Server 2012 Standard,
How to create backup schedule for multiple hard disk. 1. I have scheduled a multiple backup for disk1, disk2 but the backup fails.
How to create different backup schedule for single Hard disk.
Please help

Hi
Check these artciles,same on 2012 r2 standard;
https://technet.microsoft.com/en-us/library/cc754054.aspx?f=255&MSPPError=-2147217396
https://technet.microsoft.com/en-us/library/dd834883.aspx

0EQUIPMENT_ATTR; DATE FROM & DATE TO objects are not available

Hi,
In the equipment masters iam getting the FROM DATE & TO DATE, even when iam scheduling the info package, master data is getting loaded based on these dates. once after loading iam able to see the FROM DATE & TO DATE data at object level.
But when i want to use the same date fileds at report level to check the equipment usage period based on the functional location means these objects are not even available as attributes at report level.
Can any body suggest me the approach how i can get these fields at report level and make use of them.
Regards,
Prabhakar.

Hi,
In the equipment masters iam getting the FROM DATE & TO DATE, even when iam scheduling the info package, master data is getting loaded based on these dates. once after loading iam able to see the FROM DATE & TO DATE data at object level.
But when i want to use the same date fileds at report level to check the equipment usage period based on the functional location means these objects are not even available as attributes at report level.
Can any body suggest me the approach how i can get these fields at report level and make use of them.
Regards,
Prabhakar.

HT5958 Existing projects will not update and are not available for Final Cut Pro 10.1.1?

I have updated to Final Cut 10.1.1 but existing projects from previous version will not update and are not available. Have tried to re-install Final Cut as well as bring the projects to another computer which has the update, but they still will not update. Has anyone else encountered this problem and is there anyone who can assist?

In the Finder take a look at the path where your old projects and events are stored. They should be in Final Cut Projects and Final Cut Events folders respectively. Those folders need to be in Users/user/Movies on the boot drive and/or at the root level of other drives for FCPX to see them.
If that's indeed the case, then you should be able to get them updated ny using the Update Projects and Events command form the File menu and then clicking on Locate.
Russ

Receive a "Server is Not Available" error when trying to connect win 7 pro PC to Windows Server Essentials 2012 R2 Domain via Connector

I am trying to connect Windows 7 Pro 64 bit SP1 Computers to a Windows Server 2012 Essentials R2 domain and I receive the following error: "The server is not available. Try connecting to this computer again, or for more information, see Troubleshoot
connecting computers to the server." I have tried all of the steps in the Microsoft technet article "http://technet.microsoft.com/library/jj635102.aspx" and still am receiving this error. A little background on this specific case...
All of these computers were already attached to a different Windows Server Essentials 2012 R2 domain. They have all been taken off the existing domain and added to a workgroup. I have uninstalled the Server Essentials 2012 Connector and deleted
all log files. Has anyone else had this issue? Any help would be greatly appreciated! This is an urgent issue... Thanks in advance all!

Would you be willing to run this script on your server?
http://gallery.technet.microsoft.com/Windows-Server-Essentials-556159c3
Also on a client to test connectivity?
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Windows server 2012 standard - slow performance in file sharing

I recently installed two windows server 2012, one is for DC, one is for File Sharing; it works fine in the beginning.
Lately, it comes a problem, every once a while it is very slow when opening a file on the server from a client PC; but when i restart the file server then it will be fine again.

Hi Simon,
Based on your description, how is the workload of the file server?
Before going further, regarding slow network performance when opening a file that is located in a shared folder on a remote network computer, the following article can be
referred to as reference.
Slow network performance when you open a file that is located in a shared folder on a remote network computer
http://support.microsoft.com/kb/829700
Besides, the following thread may have focused on the similar issue and can be worth taking a look.
Slow network file execution on Windows Server 2012
http://social.technet.microsoft.com/Forums/en-US/bcb4b580-50ef-4f10-bc9b-16db1bf24804/slow-network-file-execution-on-windows-server-2012?forum=winserverfiles
Best regards,
Frank Shen

Some performance counter objects are not available for a 32-bit process on 64-bit versions of Windows Server 2012 standard

Similar Messages

Maybe you are looking for