Some podcast episodes I can drag & drop, not others

New current gen iPod Touch, 16gb. Just downloaded iTunes 8.2 (which may have been my first mistake, in hindsight...always wait for that .1) on an HP Vista laptop (which I know is my second problem...can't be helped).
When I started using it (just got it a few days ago), I let the automatic sync update my podcasts. But I couldn't find a setting I liked just right to keep the ones I wanted on and not others, so I decided to turn off the auto-sync and just drag & drop.
But when I started dragging my podcasts over, I noticed some would come over, and others wouldn't. All of my podcasts are subscribed in iTunes, and it's even such that I can get certain episodes of a particular podcast, but not others. Tried restarting iTunes and iPod both. I've got plenty of space left, and even tried deleting some casts, but the ones that wouldn't sync before still wouldn't.
Also have tried downloading the missing episodes via the iTunes store app on the Touch, but the same casts, when downloaded, still don't show up it seems.
Any ideas? This seems to be a very random problem.

I think you will find that podcasts are handled pretty well by iTunes if you let it do it's job. Dragging and dropping podcasts seems like too much work - especially when you get the problems you are seeing.
BTW, the setting that works best for me is the simplest - Sync all unplayed podcasts. I refresh my podcasts at least once per day, and when I sync, listened to ones are removed, new ones are added. Seems pretty simple. If you have used an older iPod, partially listened to podcasts were removed as well. This is not true with the touch. Podcasts remain on the touch until you have finished with them.

Similar Messages

  • Some podcast episodes disabled

    Some podcasts episodes are disabled. The get button does not appear. other episodes before and after are ok and on the other library on another machine the podcasts are enabled. Anyone know why some are disabled? there are no parental controls set on.

    I think you will find that podcasts are handled pretty well by iTunes if you let it do it's job. Dragging and dropping podcasts seems like too much work - especially when you get the problems you are seeing.
    BTW, the setting that works best for me is the simplest - Sync all unplayed podcasts. I refresh my podcasts at least once per day, and when I sync, listened to ones are removed, new ones are added. Seems pretty simple. If you have used an older iPod, partially listened to podcasts were removed as well. This is not true with the touch. Podcasts remain on the touch until you have finished with them.

  • Image drag drop not working in scaffholding. Does it require soem setting?

    image drag drop not working in scaffholding. Does it require soem setting?

    Hello Manoj,
    The scaffolding teamplate which you use to create scaffolding page is actually a design prototype which helps you to create similar types of pages instances very quickly without authoring each page separately (for example news, aticle types of pages) and that is the concept of scaffolding only.
    For example - When you go to location http://localhost:4502/miscadmin#/etc/scaffolding/geometrixx you will see a "News" page which is an example of scaffolding (this is a similar page which you can create using scaffolding template).
    Now if you open this page you will be accessing http://localhost:4502/cf#/etc/scaffolding/geometrixx/news.html and here you will see already design page.
         1. if you access page properties from side kick you will see how this page is configured using target template and target path
         2. if you go to design mode using side kick you will see how the component has been design (which is similar to what appears on page when you came first time)
         3. Now come back to normal view of that page (http://localhost:4502/cf#/etc/scaffolding/geometrixx/news.html) and author this page with some dummy property and click on "create" button. I know here you can not author the image as it comes as disabled empty box.
         4. once you author the content and click on create button it will create an instance of scaffolding page on the same page you can see the link on the top of same page.
         5. Now access that page, when you access that page the page will take reference of target template you configured using pare preoperties to display the page.
         6. On this page you will see the same component you configured and when you will edit it you can author the image from there directly.
    Now question is why to configure same component two times half data from scaffolding and half data from page but answer is the design is correct because the page design which you have created (for example http://localhost:4502/cf#/etc/scaffolding/geometrixx/news.html) is just proto type to create actual page instances and prototype can not holds values for page instance (specially image until it doesnt configured correctly for page instance in this case) which exist only when you create pages using the scaffolding page prototype. Otherwise you have to do more customization by extending scaffolding "/libs/wcm/scaffolding" changing the code and design OR you have to design it according to your target page strtucture which you have configured in page properties (specially image node).
    If you want to create your own page prototype using scaffolding template and want image to associate just copy paste "/etc/scaffolding/geometrixx/news/jcr:content/dialog/items/items/tab2" node to your newly created scaffolding page prototype.
    for more information on scaffolding just refer -http://dev.day.com/docs/en/cq/current/wcm/scaffolding.html
    I hope it clarifies your question and help you to proceed. Let me know if you need more information or help.
    Thanks,
    Pawan

  • Can't sync some podcast episodes

    Certain podcast episodes will not sync to my 5th generation iPod. My iPod was setup to sync automatically and the podcasts were setup to sync all episodes of all podcasts, but there are 4 or 5 episodes that will not sync to my iPod. Other episodes of the same podcasts do sync properly. I changed the settings to manually manage my iPod, but when I dragged these podcast episodes from my iTunes podcast folder to the iPod icon the + sign never appears and if I try to drop the episode into the iPod's podcast folder it still refuses to copy. What's broken?
    Powerbook G4   Mac OS X (10.4.9)  

    The files might be corrupted. Have you tried downloading again?

  • Can Drag But Not Drop

    Hello. This is my first time posting. I have a problem I cannot solve. I was able to DRAG and DROP my iTunes songs in the order I wanted them. But cannot do so anymore. Something must have changed somewhere. I saw somewhere on another forum to sort by the first column on the left(song order number) , but I cannot find this anywhere.
    Please help me as I love iTunes player but am getting ready to go back to windows media player. Thanks in advance for your help.

    I do not have an iPod. I want to reorder the songs I downloaded to my hard drive to the order I want them.
    I just made a new playlist and dropped these songs into it. They became out of the order that I had them in. Now THEY will not drop either. I am sick of iTunes. It is becoming more trouble than it is worth. I NEVER had this problem with Windows Media Player. At least it is dependable. I know my songs will stay in the order I put them.
    I like to keep my songs all together by artist abd genre. All one Artist together plus the genre that the artist belongs. I had them placed in this order by making a new playlist and now that playlist will NOT let me rearrange these songs like I had them. I cannot DROP ANY SONG ON ANY PLAYLIST. Something is happening because at first I could arrange them and then they became mixed up and now I cannot drop them where I want them. I can drag but they go right back to the position they were in This IS ON A new playlist I just made.

  • "not enough memory" error when attempting to get some podcast episodes

    I subscribe to several podcasts. All but one seem to be working perfectly. Here's the url of the one I'm having trouble with:
    http://feeds.feedburner.com/KBCAudio
    Here's the problem:
    All episodes appear as they should. However, some of the episides WILL download when I select "Get" and some WILL NOT. Those that will not yield the following error message:
    "There is a problem dowloading {episode name}. There is not enough memory available. Please check that the URL is correct and the connection to the network is active and try again."
    Any ideas how to resolve this? I've tried:
    1. Deleting old files.
    2. Deleting and re-subscribing to the feed.
    Is this a problem with iTunes or a problem with the feed?

    I suspect it's the feed as I've just tried it and the latest episode fails. Try contacting the Podcast's producer/publisher to let them know, since they may not. From your linked page, click on their name and follow that to their website, where you should find contact details.
    By the way, even if the problem is with iTunes, it's still down to the producer/publisher to rectify it, which is why I suggest you contact them
    Phil

  • Copy/paste and drag/drop not working in Mt. Lion

    After two weeks of searching, I can not find the hangup which is causing my iMac 27" 10.8 to stop copy/paste and drag/drop following successfully doing the same shortly after startup. In Safe Mode, it doesn't happen, so I'm wondering how to track down this problem (extension?). I have to restart in order to get it functioning again after a short time of working. There has to be some kind of timing, like a program installed with a time limit which probably was forgotten in Lion and then reared its ugly head in Mt. Lion. Any suggestions for tracking this puppy? Or is there a program I could buy to do so?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • LR 2.1 & 2.0 ~ DRAG & DROP not working correctly with  photos when moving, applying keywords

    Today this issue started, originally in 2.0, updated to 2.1 and issue continues.
    Issue: DRAG & DROP feature with mouse (or pad on laptop) will select multiple photos, (with CTRL & SHIFT key as typical with Windows machines)but when I try to move them to a different folder, or drop them onto a keyword, it will not work.
    Specifically, I select two photos to move to a different folder, the selection work, but when I try to "grab" the selected photos, Lightroom defaults to One Photo, and it will not grab it to move it. However, I can "right click" on the intended folder and can select "move selected photos to folder" and that works. This issue also applys to assigning keywords, and I would assume other similiar actions. I should note, that I can "rotate", assign "labels", "stars", and Keywords from Keyword sets, it just happens with the "Drag & Drop" feature.
    Help
    The feature works correctly in other Windows programs, so I'm sure it's related to Lightroom and not the mouse.
    I have a Windows Vista machine, 3GB RAM 160GB HD, ~ 75% free space, AMD Turion X2 Dual Core 70 Processor. Everything has worked fine up until this morning.
    Prior to upgrading to 2.1, I optimized my Catalogue. Everything seems to work fine except this feature.
    Help

    Drag by the actual image area of the thumbnail, not the surrounding 'fake slide' cell.
    That's a feature of Lightroom's grid view. Clicking on image area of thumbnail keeps the multiple selection and makes the image clicked the primary select. Clicking on the outer thumbnail area deselects all but the active image.

  • Drag & Drop Not Working In Audition CC 2014

    When I try to create a CD layout using the media browser, the selected file or files will not drag and drop into the CD Layout panel.  However, if I right click on the file, I can choose "Insert into CD layout" and then it works fine.  Am I doing something wrong with drag and dropping?  I don't understand why that method isn't working.

    I just discovered something.  What I meant above is that I cannot drag and drop files from the "Media Browser" panel.  Surely that should be possible.  After all, that is how you browse your music files.  If I first double click a file in the browser so that it opens in the "Files" panel, I can then drag and drop files from there.  That is ridiculously tedious however because that opens the wave file and closes the "CD Layout" panel.  I then have to reopen the "CD Layout" panel before I can drag and drop a file.  I'm pretty sure you should be able to simply drag and drop from the Media Browser.  Any comments from Adobe?

  • New podcast episode downloads in subscription but not shown in episode list

    We are uploading podcasts under the name Rivendell Fellowship. (link is http://itunes.apple.com/us/podcast/rivendell-fellowship/id392550297)
    I subscribe and the most recent episode downloaded automatically and plays in I-tunes. But when I search through our episode list, it isn't shown. I wanted to post an online link to that particular episode but can't find it to do so.
    Any help would be appreciated.
    Thanks

    Your latest episode, 'Follow Me', posted 6 March, appears in the feed, when subscribing, and in the Store page. The only oddity is that the Store page is not showing the duration - this is a quirk which has affected a number of podcasts recently: but everything otherwise is quite normal.
    If you want to post a link to the actual media file, it's at
    http://recordings.talkshoe.com/TC-87855/TS-461055.mp3
    Otherwise I'm not entirely clear whether you still have a problem - please do post back if you have, but it would be helpful if you could provide exact details of what you are expecting to see but aren't.

  • Drag-Drop not working with JRE 1.6.07

    I have a problem where (when using the next-gen java plugin) applets do not appear as drop targets.
    In more detail, I have a .NET winforms application, which has a web browser component on it running an Oracle forms application in a Java app. In JRE 1.6u7 you can drag an item onto the applet and it will notify .NET that a drag-drop operation has occurred. In newer versions of JRE (i've tested 6u11 and 6u13) with the "enable next-generation java plugin" checked, this drag-drop no longer works. (instead of a "hand" cursor, you get a "not allowed" cursor).
    Has anyone else experienced this issue?
    Thanks,
    Rich.

    Up
    No idea ?

  • How to manage podcast episodes by: marking favorites, writing notes, etc.

    I realize this is probably only a dream, but I would love a Podcasts app in which I could mark certain episodes within a station I listen to as *favorite* so that I could come back to these favorite episodes from time to time and review their content.  What would be really cool is if I could not only mark them as favorites but also write a small note to myself as to the main info points from the podcast episode, so that when reviewing things, I could find what I am looking for easier.  Since I glean information from the many podcasts I listen to for business purposes, having a library of the single best episodes (an acompanying notes) would really enhance my podcast experience. 
    Is there any way to do this with the Podcasts app? 
    Is there a different app I should explore for this?
    Does itunes support something like this (or for that matter any other type of app for my iphone 5)?
    Thanks much.

    i dont know how the programs work, the ftp and rss updater and whatever, but if u use feedburner, or u can change what the name of the file it edits is, or u can create a .htacess that roots it, just stick all old episodes under what it updates in the file iWeb will update and when it updates, new episodes go on top
    ...er...mumbo jumbo...didjoo understand what i mean?

  • I downloaded some podcasts, but I can't find them. Where are they?

    I just downloaded 17 podcasts episodes. The iTunes confirms that they're in the iPhone (4S), but I can't find them.
    I already looked in the "Music" section, "More", etc. But the "Podcasts" item it's no there. Neither in the "Video" section.
    Do I need an app to make they work?
    Where they could be?
    Thanks!
    Ana C.

    They are no longer supported in the Music app. You need to download the Podcast app from the App store. It is free.

  • File Drag & Drop Not Working

    I downloaded iTunes 10 and the new Safari this morning, and restarted. Now I can't drag files (but I CAN drag windows). Any ideas?

    Never mind. I got frustrated not being able to do anything and spent a few hours reinstalling the OS and updating it. All's well now.

  • ICal to Mail drag & drop not working in OSX 10.10

    In a frequently used work flow I dragged an iCalendar entry and dropped it to mail, where it was received as .ical attachment. Sometimes I used copy/paste to insert the entry's data as plain text.
    This does not work any more with 10.10. Is there any better way to insert the ical file into an existing (reply-to) mail, without creating a blank invitation first and doing copy-paste there?

    Thanks, I have seen this but this process has the same number of steps as the blank invitation - I do not need to close the empty window in your version, but have to locate the .ics file in the finder.
    Could it be that a product manager or programmer at Apple did not understand the merits of the old drag&drop and has killed this feature without offering any replacement?

Maybe you are looking for