Some problam with 127.0.0.1 connection

hi everybody
i am using oracle db 10g express edition .
after i was installing the software on linux ubuntu 8/4 platform and i am trying to connect this adress i get "Firefox can't establish a connection to the server at 127.0.0.1."
there is something to do ?
thank you all

Oracle 10g is not IPv6 aware. Comment out any IPv6 entries in /etc/hosts, and make sure you have a normal VPv4 entry for your hostname like
192.168.1.101 hostname.domain hostname.

Similar Messages

I am trying to connect to my Wifi Network. It is a Galaxy Nexus. I am trying to connect to this Hotspot. I have an iMac that works fine with my network but for some reason with this computer I cannot connect.

So far I have pulled the system configuration file, I have reset safari, I deleted all old passwords from the wifi network in Keychain I restarted both devices. I am at the end here and I cannot get it to work I have an iMac that works fine with my network but for some reason this computer will not connect. It is system wide specifically to my personal hotspot. I can connect fine to any other network (wifi) but just not mine. I have not changed any wifi settings. I have been trying to figure this out. I have a MacBook Pro Late 2006 model running Lion (10.7.5) So any ideas anyone? Please help!

12. At a WiFi hotspot, you can't get connected. The most frequent reason is the login screen for the WiFi hotspot is only able to be connected with a single type of browser. If Safari doesn't work, try Firefox, Chrome, Omniweb, or Opera.
From my tip:
https://discussions.apple.com/docs/DOC-6411

I took some photos with my new 4s. Then, when I connected Iphone on PC asked if I wanted to start as a new phone or old. I choose my old account. I would like to know if there is any, any chance that I can recover the photos took before sync back.

I took some photos with my new 4s. Then, when I connected Iphone on PC asked if I wanted to start as a new phone or old. I choose my old account. I would like to know if there is any, any chance that I can recover the photos took before sync back.
I did not use ICloud or any storage and did not make any sync before.
Is there any Trash Can in Iphone in order to find them? I am dumb and I did not think about save them before connect to PC.

Your photos are gone. They were wiped when you restored your phone. There is no "trash can".
You obviously don't understand how to use the iPhone properly. Attached is a link to the iPhone User guide. I suggest you read through it to avoid data loss in the future.
Best,
GDG
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

My iphone 4 drop down after that it start showing apple logo i have restored it after that it shows searching on carrier signal and shows that Connect to itune... when i connect it to itune, message came that there is some problem with your iphone.

My iphone 4 drop down after that it start showing apple logo i have restored it after that it shows searching on carrier signal and shows that Connect to itune... when i connect it to itune, message came that there is some problem with your iphone.Please help me out.

Hi ahsanikram!
I have an article here for you that can help you troubleshoot this issue with your iPhone:
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/ts1275
If you are still having issues after attempting the troubleshooting steps in the previous article, see the following article:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

I hav som problem with my appstore n ibook dey just dont load i thought i need 2 upi date but now in mavericks updates r connected with appstore it opens up but it doesnt load sam with my ibook app and ye my date and time is fine any solutions?

i have some problem with my appstore and ibook they just dont load thought i need to update but now in mavericks updates are now connected with appstore so i cant do that it opens up but doesnt load just blank same with ibook store it says cannot connect and yea my date and time is fine any solutions?

Hi, James.
Yes, the iBook should run even with no battery installed.
These are the four most common possibilities when the battery will not charge:
(1) there is something wrong with your battery
(2) there is something wrong with your power adapter
(3) there is something wrong with your power input board (the part that contains the port where you plug in the adapter)
(4) there is something wrong with your logic board
Since you have eliminated all the possibilities except (4), it is likely that your logic board is having problems. The PMU (Power Management Unit) is part of the logic board, and it may be going out (hence, temporarily working again when you reset it). Since the iBook is not running reliably without the battery in place (as it should), replacing the battery most likely would be futile.
When a computer gets to be five years old, it seems a bit short-sighted to pay very much for repairs, just to have something else go wrong sooner rather than later. Have you had a look at the hugely improved specs on the new MacBooks? Is it time for a new portable to avoid embarrassment during your presentations? It sounds like that could be your best option.

Delivery temporarly suspended : [127.0.0.1]: connection refused

Hello everyone,
I have some troubles getting email services up on my server.
The plan is to run an SMTP server, POP and IMAP.
So far, POP and IMAP seem to be working, as I can log in with different users.
But there are no mail messages there.
When I check my mail queue, I find many messages.
Mostly from [email protected] or [email protected]
when I check the message details I get this :
Message ID: 5654199DFB
Date: Tue Feb 14 08:30:41
Size: 350
Sender: [email protected]
Recipient(s) & Status:
[email protected]:
delivery temporarily suspended: connect to 127.0.0.1[127.0.0.1]:
Connection refused
When I check my smtp log I get this :
Feb 14 09:07:31 billie postfix/cleanup[10385]: 9EB2799E96: message-id=<[email protected]>
Feb 14 09:07:31 billie postfix/qmgr[10387]: 9EB2799E96: from=<[email protected]>, size=636, nrcpt=1 (queue active)
Feb 14 09:07:31 billie postfix/qmgr[10387]: 2813898166: from=<[email protected]>, size=842, nrcpt=1 (queue active)
Feb 14 09:07:31 billie postfix/qmgr[10387]: 4EBB897327: from=<[email protected]>, size=705, nrcpt=1 (queue active)
Feb 14 09:07:31 billie postfix/qmgr[10387]: 5654199DFB: from=<[email protected]>, size=350, nrcpt=1 (queue active)
Feb 14 09:07:31 billie postfix/qmgr[10387]: 59AE199DE6: from=<[email protected]>, size=294, nrcpt=1 (queue active)
Feb 14 09:07:31 billie postfix/qmgr[10387]: 5C59C99DE7: from=<[email protected]>, size=1246, nrcpt=1 (queue active)
Feb 14 09:07:31 billie postfix/qmgr[10387]: 5D3DE95689: from=<[email protected]>, size=788, nrcpt=1 (queue active)
Feb 14 09:07:31 billie postfix/qmgr[10387]: 6F78D994E9: from=<[email protected]>, size=1748, nrcpt=1 (queue active)
Feb 14 09:07:31 billie postfix/qmgr[10387]: A4EC699DEC from=<[email protected]>, size=45296, nrcpt=1 (queue active)
Feb 14 09:07:31 billie postfix/qmgr[10387]: A60B0942D2: from=<[email protected]>, size=688, nrcpt=1 (queue active)
Feb 14 09:07:31 billie postfix/smtp[10388]: connect to 127.0.0.1[127.0.0.1]: Connection refused (port 10024)
Feb 14 09:07:31 billie postfix/qmgr[10387]: AB63D99DF4: from=<[email protected]>, size=1352, nrcpt=1 (queue active)
Feb 14 09:07:31 billie postfix/smtp[10388]: 9EB2799E96: to=<[email protected]>, relay=none, delay=1, status=deferred (connect to 127.0.0.1[127.0.0.1]: Connection refused)
Feb 14 09:07:31 billie postfix/qmgr[10387]: AB74995B99: from=<[email protected]>, size=658, nrcpt=1 (queue active)
Feb 14 09:07:31 billie postfix/smtp[10389]: connect to 127.0.0.1[127.0.0.1]: Connection refused (port 10024)
Feb 14 09:07:31 billie postfix/smtp[10389]: 2813898166: to=<[email protected]>, relay=none, delay=130692, status=deferred (connect to 127.0.0.1[127.0.0.1]: Connection refused)
Feb 14 09:07:31 billie postfix/smtp[10388]: connect to 127.0.0.1[127.0.0.1]: Connection refused (port 10024)
Feb 14 09:07:31 billie postfix/smtp[10388]: 4EBB897327: to=<[email protected]>, relay=none, delay=198147, status=deferred (connect to 127.0.0.1[127.0.0.1]: Connection refused)
Feb 14 09:07:31 billie postfix/smtp[10389]: connect to 127.0.0.1[127.0.0.1]: Connection refused (port 10024)
Feb 14 09:07:31 billie postfix/smtp[10389]: 5654199DFB: to=<[email protected]>, relay=none, delay=2210, status=deferred (connect to 127.0.0.1[127.0.0.1]: Connection refused)
And to top the cake, here is my postconf -n :
postconf -n
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = localhost
localrecipientmaps = proxy:unix:passwd.byname $alias_maps
luser_relay =
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains =
messagesizelimit = 15728640
mydestination = $myhostname,localhost.$mydomain,localhost,domainname.be
mydomain = domainname.be
mydomain_fallback = localhost
myhostname = mail.domainname.be
mynetworks = 127.0.0.1/32,83.217.76.0/24
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdclientrestrictions = permit_mynetworks permit
smtpdenforcetls = no
smtpdpw_server_securityoptions = cram-md5,login,plain
smtpdrecipientrestrictions =
permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_certfile = /etc/certificates/Default.crt
smtpdtls_keyfile = /etc/certificates/Default.key
smtpduse_pwserver = yes
smtpdusetls = no
unknownlocal_recipient_rejectcode = 550
virtualmailboxdomains = hash:/etc/postfix/virtual_domains
virtual_transport = lmtp:unix:/var/imap/socket/lmtp
Anyone an idea to fix this? I think it is just something minor, but I don't seem to find it. Maybe something involving junk-mail scanning ?
Many many thanks for all your time.
If there are any other questions, I'll try to answer them as soon as possible.

This is my output
ps -U clamav
PID TT STAT TIME COMMAND
58 ?? Ss 0:00.01 freshclam -d -D -pfreshclam.pid -c 1
Tried restarts and bin/usr/amavisd start and still nothing. Also looked in the logs and found this:
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: starting. /usr/bin/amavisd at www.funsunstudio.com ama
visd-new-2.2.0 (20041102), Unicode aware
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: user=, EUID: 0 (0); group=, EGID: 0 80 5 29 4 20 3 2 1
0 (0 80 5 29 4 20 3 2 1 0)
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Perl version 5.008006
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Net::Server: 2006/02/15-13:19:35 Amavis (type Net::Serv
er::PreForkSimple) starting! pid(1611)
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Net::Server: Binding to UNIX socket file /var/amavis/am
avisd.sock using SOCK_STREAM
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Net::Server: Binding to TCP port 10024 on host 127.0.0.
1
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Net::Server: Setting gid to "82 82"
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Net::Server: Setting uid to "82"
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Module Amavis::Conf 2.033
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Module Archive::Tar 1.22
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Module Archive::Zip 1.14
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Module Compress::Zlib 1.33
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Module Convert::TNEF 0.17
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Module Convert::UUlib 1.03
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Module DB_File 1.810
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Module MIME::Entity 5.416
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Module MIME::Parser 5.416
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Module MIME::Tools 5.416
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Module Mail::Header 1.65
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Module Mail::Internet 1.65
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Module Mail::SpamAssassin 3.000001
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Module Net::Cmd 2.26
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Module Net::SMTP 2.29
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Module Net::Server 0.87
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Module Time::HiRes 1.65
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Module Unix::Syslog 0.99
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Amavis::DB code NOT loaded
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Amavis::Cache code NOT loaded
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Lookup::SQL code NOT loaded
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Lookup::LDAP code NOT loaded
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: AMCL-in protocol code loaded
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: SMTP-in protocol code loaded
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: ANTI-VIRUS code loaded
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: ANTI-SPAM code loaded
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Unpackers code loaded
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Found $file at /usr/bin/file
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: No $arc, not using it
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Found $gzip at /usr/bin/gzip
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Found $bzip2 at /usr/bin/bzip2
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: No $lzop, not using it
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: No $lha, not using it
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: No $unarj, not using it
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Found $uncompress at /usr/bin/uncompress
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: No $unfreeze, not using it
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: No $unrar, not using it
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: No $zoo, not using it
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Found $cpio at /usr/bin/cpio
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: No $ar, not using it
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: No $rpm2cpio, not using it
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: No $cabextract, not using it
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: No $dspam, not using it
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: Found secondary av scanner Clam Antivirus - clamscan at
/usr/bin/clamscan
Feb 15 13:19:35 www.funsunstudio.com /usr/bin/amavisd[1611]: SpamControl: initializing Mail::SpamAssassin
Feb 15 13:19:36 www.funsunstudio.com /usr/bin/amavisd[1611]: SpamControl: done
Feb 15 13:20:39 www.funsunstudio.com /usr/bin/amavisd[1611]: Net::Server: 2006/02/15-13:20:39 Server closing!

127.0.0.1 Connection refused

For some reason, I am unable to send or receive messages. The senders and receivers get no error messages, but the messages get stuck in the mail queue with the error "delivery temporarily suspended: connect to 127.0.0.1[127.0.0.1]: Connection refused"
It has worked perfectly in the past. I recently began using DNS service (I wasn't previously), but now it won't work with the DNS on or off.
Correction: When I turn DNS off, I get this error: The error that the other server returned was: 550 550 #5.1.0 Address rejected [email protected] (state 14).
Message was edited by: vidgpersonrsw

The 'delivery temporarily suspended' message is coming from postfix trying to pass the message through some kind of filter process that isn't running.
For example, the anti-virus scanner runs in this manner - messages come into the server, postfix passes the message to the scanner via a custom port on 127.0.0.1 and the scanner passes it back to postfix.
You should check that all your mail components are working correctly.

[Solved] Trouble with WPA/WPA2 and wireless connections (ath9k)

Hi, I'm having some issues with my Arch install. Right now I'm posting this from Windows so I don't have precise logs, but I mostly remember the issue so bare with me.
I'm using ath9k with my Bigfoot Killer 1202 card (not sure what the exact model is), and I can't connect to my university's WPA/WPA2 access point. Using wpa_supplicant I get the error "4-way handshake failed - pre-shared key may be incorrect".
So after some digging I found that I can get it to authenticate with nohwcrypt=1, but when I rmmod ath9k && modprobe ath9k nohwcrypt=1 it enumerates itself as wlan0 (instead of wlp3s0, which is what I get from booting up).
Then I made the file /etc/modprobe.d/ath9k with the contents "options ath9k nohwcrypt=1" but it seems to still not want to connect until I rmmod && modprobe manually.
Can someone point me in the right direction on how to fix this issue? I haven't used Arch in a few years and a lot of things have changed, and so far it seems nothing works as I expect it to. Also, how do I get my wifi card to enumerate as the same device no matter when I load ath9k? I don't care if it's called wlan0 or wlp3s0, I just want it to stay the same.
Edit: Additional Info
lspci
03:00.0 Network controller: Qualcomm Atheros AR9462 Wireless Network Adapter (rev 01)
cat /sys/module/ath9k/parameters/nohwcrypt
[root@huxley pobegam]# cat /sys/module/ath9k/parameters/nohwcrypt
0
(so I guess it isn't loading from ath9k.conf on boot after all?)
wpa_supplicant output
<3>CTRL-EVENT-SCAN-RESULTS
<3>WPS-AP-AVAILABLE
<3>CTRL-EVENT-SCAN-RESULTS
<3>WPS-AP-AVAILABLE
<3>CTRL-EVENT-SSID-REENABLED id=0 ssid="Student"
<3>Trying to associate with 00:19:30:6b:1b:a2 (SSID='Student' freq=2412 MHz)
<3>Association request to the driver failed
<3>Associated with 00:19:30:6b:1b:a2
<4>WPA: Failed to set PTK to the driver (alg=2 keylen=32 bssid=00:19:30:6b:1b:a2)
<3>CTRL-EVENT-DISCONNECTED bssid=00:19:30:6b:1b:a2 reason=1 locally_generated=1
<3>WPA: 4-Way Handshake failed - pre-shared key may be incorrect
<3>CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Student" auth_failures=2 duration=20
<3>CTRL-EVENT-SCAN-RESULTS
<3>WPS-AP-AVAILABLE
wpa_supplicant configuration file
[root@huxley wpa_supplicant]# cat sunyit.conf
ctrl_interface=/var/run/wpa_supplicant
update_config=1
network={
scan_ssid=1
ssid="Student"
proto=WPA
key_mgmt=WPA-PSK
pairwise=TKIP
group=TKIP
priority=1
psk="Wireless@SUNYIT"
Last edited by Pobega (2013-10-02 03:55:51)

Update: It seems to work ONLY when I rmmod && modprobe; if I force nohwcrypt=1 at boot it doesn't seem to work. Seems kind of odd... Wonder if this is a kernel issue?
Edit: Also updated with dmesg (because I'm an idiot and forgot to include it)
[ 2.802118] hub 3-1:1.0: USB hub found
[ 2.802210] hub 3-1:1.0: 6 ports detected
[ 2.876377] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 2.876380] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:90:f5:ea:54:ff
[ 2.876382] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.876418] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 2.876688] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251)
[ 2.876697] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.908262] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 2.913682] [drm] Memory usable by graphics device = 2048M
[ 2.913687] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[ 2.913688] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 2.913702] Console: switching to colour dummy device 80x25
[ 2.913836] i915 0000:00:02.0: setting latency timer to 64
[ 2.948473] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 2.948482] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.948483] [drm] Driver supports precise vblank timestamp query.
[ 2.948547] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.032964] hub 4-1:1.0: USB hub found
[ 3.033016] hub 4-1:1.0: 8 ports detected
[ 3.038244] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.169633] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 3.221450] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 3.237256] fbcon: inteldrmfb (fb0) is primary device
[ 3.271526] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 3.271623] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.491212] Switched to clocksource tsc
[ 4.027317] psmouse serio2: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126c00, board id: 2439, fw id: 1215751
[ 4.066270] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
[ 4.477837] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 4.967580] Console: switching to colour frame buffer device 240x67
[ 4.977758] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.977761] i915 0000:00:02.0: registered panic notifier
[ 4.978457] acpi device:45: registered as cooling_device8
[ 4.978479] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.978579] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 4.978690] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.978877] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 4.979210] snd_hda_intel 0000:00:03.0: irq 49 for MSI/MSI-X
[ 4.989927] hda_codec: invalid CONNECT_LIST verb 5[1]:0
[ 4.989974] hda_codec: invalid CONNECT_LIST verb 6[1]:0
[ 4.990029] hda_codec: invalid CONNECT_LIST verb 7[1]:0
[ 4.991935] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 4.992031] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 4.992087] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 4.994100] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 4.994171] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 6.977361] wlan0: authenticate with 00:1d:45:cd:c1:c2
[ 6.987213] wlan0: send auth to 00:1d:45:cd:c1:c2 (try 1/3)
[ 6.988904] wlan0: authenticated
[ 6.989040] ath9k 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 6.989044] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 6.989046] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 6.990123] wlan0: associate with 00:1d:45:cd:c1:c2 (try 1/3)
[ 6.993437] wlan0: RX AssocResp from 00:1d:45:cd:c1:c2 (capab=0x431 status=0 aid=9)
[ 6.993577] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6.993624] wlan0: associated
[ 6.998736] wlan0: deauthenticating from 00:1d:45:cd:c1:c2 by local choice (reason=1)
[ 7.002835] cfg80211: Calling CRDA for country: US
[ 24.197672] wlan0: authenticate with 00:1d:45:cd:c1:c2
[ 24.207666] wlan0: send auth to 00:1d:45:cd:c1:c2 (try 1/3)
[ 24.209338] wlan0: authenticated
[ 24.209468] ath9k 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 24.209472] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 24.209474] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 24.210593] wlan0: associate with 00:1d:45:cd:c1:c2 (try 1/3)
[ 24.213338] wlan0: RX AssocResp from 00:1d:45:cd:c1:c2 (capab=0x31 status=0 aid=9)
[ 24.213481] wlan0: associated
[ 24.221396] wlan0: deauthenticating from 00:1d:45:cd:c1:c2 by local choice (reason=1)
[ 24.225880] cfg80211: Calling CRDA to update world regulatory domain
[ 50.045002] wlan0: authenticate with 00:19:30:6b:1b:a2
[ 50.054957] wlan0: send auth to 00:19:30:6b:1b:a2 (try 1/3)
[ 50.056639] wlan0: authenticated
[ 50.056775] ath9k 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 50.056779] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 50.056781] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 50.057899] wlan0: associate with 00:19:30:6b:1b:a2 (try 1/3)
[ 50.061270] wlan0: RX AssocResp from 00:19:30:6b:1b:a2 (capab=0x431 status=0 aid=89)
[ 50.061426] wlan0: associated
[ 50.073874] wlan0: deauthenticating from 00:19:30:6b:1b:a2 by local choice (reason=1)
[ 50.078661] cfg80211: Calling CRDA to update world regulatory domain
[ 75.892318] wlan0: authenticate with 00:1d:45:cd:c1:c2
[ 75.902267] wlan0: send auth to 00:1d:45:cd:c1:c2 (try 1/3)
[ 75.904108] wlan0: authenticated
[ 75.904254] ath9k 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 75.904256] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 75.904257] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 75.905145] wlan0: associate with 00:1d:45:cd:c1:c2 (try 1/3)
[ 75.908344] wlan0: RX AssocResp from 00:1d:45:cd:c1:c2 (capab=0x401 status=17 aid=0)
[ 75.908348] wlan0: 00:1d:45:cd:c1:c2 denied association (code=17)
[ 75.918844] wlan0: deauthenticating from 00:1d:45:cd:c1:c2 by local choice (reason=3)
[ 86.045293] wlan0: authenticate with 00:19:30:6b:1b:52
[ 86.059226] wlan0: send auth to 00:19:30:6b:1b:52 (try 1/3)
[ 86.061328] wlan0: authenticated
[ 86.061475] ath9k 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 86.061477] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 86.061478] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 86.064853] wlan0: associate with 00:19:30:6b:1b:52 (try 1/3)
[ 86.169949] wlan0: associate with 00:19:30:6b:1b:52 (try 2/3)
[ 86.179194] wlan0: RX AssocResp from 00:19:30:6b:1b:52 (capab=0x431 status=0 aid=22)
[ 86.179323] wlan0: associated
[ 89.123073] wlan0: deauthenticated from 00:19:30:6b:1b:52 (Reason: 4)
[ 89.147287] cfg80211: Calling CRDA for country: US
[ 105.770381] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 105.770386] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 105.770418] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 114.898216] wlan0: authenticate with 00:19:30:6b:1b:a2
[ 114.912130] wlan0: send auth to 00:19:30:6b:1b:a2 (try 1/3)
[ 114.914102] wlan0: authenticated
[ 114.914235] ath9k 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 114.914239] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 114.914241] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 114.914348] wlan0: associate with 00:19:30:6b:1b:a2 (try 1/3)
[ 114.916916] wlan0: RX AssocResp from 00:19:30:6b:1b:a2 (capab=0x401 status=17 aid=0)
[ 114.916920] wlan0: 00:19:30:6b:1b:a2 denied association (code=17)
[ 114.937999] wlan0: deauthenticating from 00:19:30:6b:1b:a2 by local choice (reason=3)
[ 125.064495] wlan0: authenticate with 00:19:30:6b:1b:52
[ 125.078431] wlan0: send auth to 00:19:30:6b:1b:52 (try 1/3)
[ 125.081945] wlan0: authenticated
[ 125.082083] ath9k 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 125.082094] ath9k 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 125.082095] ath9k 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 125.084061] wlan0: associate with 00:19:30:6b:1b:52 (try 1/3)
[ 125.098558] wlan0: RX AssocResp from 00:19:30:6b:1b:52 (capab=0x431 status=0 aid=22)
[ 125.098683] wlan0: associated
[ 127.937457] wlan0: deauthenticated from 00:19:30:6b:1b:52 (Reason: 4)
[ 127.959914] cfg80211: Calling CRDA to update world regulatory domain
Edit: I ended up solving my problem -- the issue I was running into was that ath9k was baked into my initrd without nohwcrypt=1. I opted to `mkinitcpio` again without MODULES='ath9k' -- alternatively, you could add a modprobe.d file to FILES= to get it to work, but I just figured this is simpler.
Last edited by Pobega (2013-10-02 03:57:27)

Some problems with 3D with xorg 1.9.2-1 and xf86-video-intel 2.12.0-3

I have some problems with the upgrade to xorg 1.9.1-1 and xf86-video-intel 2.12.0-3. Glxgears does not run smoothly at all and I got 15-20 fps (instead of the normal 60 because intel should sync with the V refresh rate). Very curiously, these problems disapear if I move the mouse cursor somewhere in the screen. Then glxgears run smooth and I have indeed the expected 60 fps
There are no error messages and glxinfo say that 3D is indeed enabled.
Xorg log file:
[ 358.899] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
[ 358.899] _XSERVTransOpen: transport open failed for inet6/myhost:0
[ 358.899] _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
[ 358.900]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 358.900] X Protocol Version 11, Revision 0
[ 358.900] Build Operating System: Linux 2.6.35-ARCH i686
[ 358.900] Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Sat Oct 30 19:57:05 UTC 2010 i686
[ 358.900] Kernel command line: root=/dev/disk/by-uuid/e5c72fc3-4e8b-4f5d-9023-12216af63d84 resume=/dev/disk/by-uuid/96f14b75-fb64-4881-863d-124af7c13e2f ro
[ 358.900] Build Date: 01 November 2010 10:23:07PM
[ 358.900]
[ 358.900] Current version of pixman: 0.18.4
[ 358.900] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 358.900] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 358.900] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 9 10:14:10 2010
[ 358.900] (==) Using config file: "/etc/X11/xorg.conf"
[ 358.901] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 358.901] (==) ServerLayout "X.org Configured"
[ 358.901] (**) |-->Screen "Screen0" (0)
[ 358.901] (**) | |-->Monitor "Monitor0"
[ 358.901] (**) | |-->Device "Card0"
[ 358.901] (**) |-->Input Device "Mouse0"
[ 358.901] (**) |-->Input Device "touchpad"
[ 358.901] (**) |-->Input Device "Keyboard0"
[ 358.901] (**) Option "DontZap" "off"
[ 358.901] (**) Option "StandbyTime" "5"
[ 358.901] (**) Option "SuspendTime" "5"
[ 358.901] (**) Option "OffTime" "5"
[ 358.901] (**) Option "Xinerama" "on"
[ 358.901] (**) Option "AutoAddDevices" "off"
[ 358.901] (**) Not automatically adding devices
[ 358.901] (==) Automatically enabling devices
[ 358.902] (**) Xinerama: enabled
[ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 358.902] Entry deleted from font path.
[ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 358.902] Entry deleted from font path.
[ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 358.902] Entry deleted from font path.
[ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 358.902] Entry deleted from font path.
[ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 358.902] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/
[ 358.902] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 358.902] (II) Loader magic: 0x81f1f80
[ 358.902] (II) Module ABI versions:
[ 358.902] X.Org ANSI C Emulation: 0.4
[ 358.902] X.Org Video Driver: 8.0
[ 358.902] X.Org XInput driver : 11.0
[ 358.902] X.Org Server Extension : 4.0
[ 358.903] (--) PCI:*(0:0:2:0) 8086:27a2:1584:9916 rev 3, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0040000/262144, I/O @ 0x00001800/8
[ 358.903] (--) PCI: (0:0:2:1) 8086:27a6:1584:9916 rev 3, Mem @ 0xb0100000/524288
[ 358.904] (II) Open ACPI successful (/var/run/acpid.socket)
[ 358.904] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) LoadModule: "extmod"
[ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 358.904] (II) Module extmod: vendor="X.Org Foundation"
[ 358.904] compiled for 1.9.2, module version = 1.0.0
[ 358.904] Module class: X.Org Server Extension
[ 358.904] ABI class: X.Org Server Extension, version 4.0
[ 358.904] (II) Loading extension MIT-SCREEN-SAVER
[ 358.904] (II) Loading extension XFree86-VidModeExtension
[ 358.904] (II) Loading extension XFree86-DGA
[ 358.904] (II) Loading extension DPMS
[ 358.904] (II) Loading extension XVideo
[ 358.904] (II) Loading extension XVideo-MotionCompensation
[ 358.904] (II) Loading extension X-Resource
[ 358.904] (II) LoadModule: "glx"
[ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 358.905] (II) Module glx: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.0.0
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (==) AIGLX enabled
[ 358.905] (II) Loading extension GLX
[ 358.905] (II) LoadModule: "record"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 358.905] (II) Module record: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.13.0
[ 358.905] Module class: X.Org Server Extension
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (II) Loading extension RECORD
[ 358.905] (II) LoadModule: "dri2"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 358.905] (II) Module dri2: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.2.0
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (II) Loading extension DRI2
[ 358.905] (II) LoadModule: "dbe"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 358.906] (II) Module dbe: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.2, module version = 1.0.0
[ 358.906] Module class: X.Org Server Extension
[ 358.906] ABI class: X.Org Server Extension, version 4.0
[ 358.906] (II) Loading extension DOUBLE-BUFFER
[ 358.906] (II) LoadModule: "dri"
[ 358.906] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 358.906] (II) Module dri: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.2, module version = 1.0.0
[ 358.906] ABI class: X.Org Server Extension, version 4.0
[ 358.906] (II) Loading extension XFree86-DRI
[ 358.906] (II) LoadModule: "synaptics"
[ 358.906] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 358.906] (II) Module synaptics: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.0, module version = 1.3.0
[ 358.906] Module class: X.Org XInput Driver
[ 358.906] ABI class: X.Org XInput driver, version 11.0
[ 358.906] (II) LoadModule: "intel"
[ 358.906] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 358.907] (II) Module intel: vendor="X.Org Foundation"
[ 358.907] compiled for 1.9.0, module version = 2.12.0
[ 358.907] Module class: X.Org Video Driver
[ 358.907] ABI class: X.Org Video Driver, version 8.0
[ 358.907] (II) LoadModule: "mouse"
[ 358.907] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 358.907] (II) Module mouse: vendor="X.Org Foundation"
[ 358.907] compiled for 1.9.0, module version = 1.6.0
[ 358.907] Module class: X.Org XInput Driver
[ 358.907] ABI class: X.Org XInput driver, version 11.0
[ 358.907] (II) LoadModule: "synaptics"
[ 358.907] (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 358.907] (II) LoadModule: "kbd"
[ 358.908] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[ 358.908] (II) Module kbd: vendor="X.Org Foundation"
[ 358.908] compiled for 1.9.0, module version = 1.4.0
[ 358.908] Module class: X.Org XInput Driver
[ 358.908] ABI class: X.Org XInput driver, version 11.0
[ 358.908] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 358.908] (--) using VT number 7
[ 358.908] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 358.908] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 358.916] drmOpenDevice: node name is /dev/dri/card0
[ 358.916] drmOpenDevice: open result is 10, (OK)
[ 358.916] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 358.916] drmOpenDevice: node name is /dev/dri/card0
[ 358.916] drmOpenDevice: open result is 10, (OK)
[ 358.916] drmOpenByBusid: drmOpenMinor returns 10
[ 358.916] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 358.916] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 358.916] (==) intel(0): RGB weight 888
[ 358.916] (==) intel(0): Default visual is TrueColor
[ 358.916] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[ 358.916] (--) intel(0): Chipset: "945GM"
[ 358.916] (==) intel(0): video overlay key set to 0x101fe
[ 358.953] (II) intel(0): Output VGA1 using monitor section vgamonitor
[ 358.953] (**) intel(0): Option "Disable" "true"
[ 359.059] (II) intel(0): Output LVDS1 using monitor section lvdsmonitor
[ 359.059] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 359.340] (II) intel(0): Output TV1 has no monitor section
[ 359.380] (II) intel(0): EDID for output VGA1
[ 359.486] (II) intel(0): EDID for output LVDS1
[ 359.486] (II) intel(0): Manufacturer: CPT Model: 13a6 Serial#: 0
[ 359.486] (II) intel(0): Year: 2006 Week: 17
[ 359.486] (II) intel(0): EDID Version: 1.3
[ 359.486] (II) intel(0): Digital Display Input
[ 359.486] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 359.486] (II) intel(0): Gamma: 2.20
[ 359.486] (II) intel(0): No DPMS capabilities specified
[ 359.486] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 359.486] (II) intel(0): First detailed timing is preferred mode
[ 359.486] (II) intel(0): redX: 0.600 redY: 0.340 greenX: 0.309 greenY: 0.559
[ 359.486] (II) intel(0): blueX: 0.149 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
[ 359.486] (II) intel(0): Manufacturer's mask: 0
[ 359.486] (II) intel(0): Supported detailed timing:
[ 359.486] (II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
[ 359.486] (II) intel(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
[ 359.486] (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
[ 359.486] (II) intel(0): Unknown vendor-specific block f
[ 359.486] (II) intel(0): FD1631154WB4
[ 359.486] (II) intel(0): /BRZÄêÿ
[ 359.486] (II) intel(0): EDID (in hex):
[ 359.486] (II) intel(0): 00ffffffffffff000e14a61300000000
[ 359.486] (II) intel(0): 11100103802115780a806d99574f8f26
[ 359.486] (II) intel(0): 21505400000001010101010101010101
[ 359.486] (II) intel(0): 010101010101ea1a0080502010301520
[ 359.486] (II) intel(0): 13004bcf100000190000000f00000000
[ 359.486] (II) intel(0): 0000000000206e050f00000000fe0046
[ 359.486] (II) intel(0): 44313633313135345742340a000000fe
[ 359.486] (II) intel(0): 002f42525a81c4eaff01010a2020004f
[ 359.487] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 359.487] (II) intel(0): Printing probed modes for output LVDS1
[ 359.487] (II) intel(0): Modeline "1280x800"x60.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
[ 359.487] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 359.487] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 359.487] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 359.487] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 359.766] (II) intel(0): EDID for output TV1
[ 359.766] (II) intel(0): Output VGA1 disabled by config file
[ 359.766] (II) intel(0): Output LVDS1 connected
[ 359.766] (II) intel(0): Output TV1 disconnected
[ 359.766] (II) intel(0): Using exact sizes for initial modes
[ 359.766] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 359.766] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 359.766] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
[ 359.766] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
[ 359.766] (==) intel(0): DPI set to (96, 96)
[ 359.767] (II) Loading sub module "fb"
[ 359.767] (II) LoadModule: "fb"
[ 359.767] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 359.767] (II) Module fb: vendor="X.Org Foundation"
[ 359.767] compiled for 1.9.2, module version = 1.0.0
[ 359.767] ABI class: X.Org ANSI C Emulation, version 0.4
[ 359.767] (==) Depth 24 pixmap format is 32 bpp
[ 359.767] (II) intel(0): [DRI2] Setup complete
[ 359.767] (II) intel(0): [DRI2] DRI driver: i915
[ 359.767] (**) intel(0): Tiling enabled
[ 359.767] (**) intel(0): SwapBuffers wait enabled
[ 359.767] (==) intel(0): VideoRam: 262144 KB
[ 359.767] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[ 359.767] (II) UXA(0): Driver registered support for the following operations:
[ 359.767] (II) solid
[ 359.767] (II) copy
[ 359.767] (II) composite (RENDER acceleration)
[ 359.767] (II) put_image
[ 359.767] (II) get_image
[ 359.767] (==) intel(0): Backing store disabled
[ 359.767] (==) intel(0): Silken mouse enabled
[ 359.767] (II) intel(0): Initializing HW Cursor
[ 359.803] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 359.804] (==) intel(0): DPMS enabled
[ 359.805] (==) intel(0): Intel XvMC decoder disabled
[ 359.805] (II) intel(0): Set up textured video
[ 359.805] (II) intel(0): Set up overlay video
[ 359.805] (II) intel(0): direct rendering: DRI2 Enabled
[ 359.805] (--) RandR disabled
[ 359.805] (II) Initializing built-in extension Generic Event Extension
[ 359.805] (II) Initializing built-in extension SHAPE
[ 359.805] (II) Initializing built-in extension MIT-SHM
[ 359.805] (II) Initializing built-in extension XInputExtension
[ 359.805] (II) Initializing built-in extension XTEST
[ 359.805] (II) Initializing built-in extension BIG-REQUESTS
[ 359.805] (II) Initializing built-in extension SYNC
[ 359.805] (II) Initializing built-in extension XKEYBOARD
[ 359.805] (II) Initializing built-in extension XC-MISC
[ 359.805] (II) Initializing built-in extension SECURITY
[ 359.805] (II) Initializing built-in extension XINERAMA
[ 359.805] (II) Initializing built-in extension XFIXES
[ 359.805] (II) Initializing built-in extension RENDER
[ 359.805] (II) Initializing built-in extension RANDR
[ 359.805] (II) Initializing built-in extension COMPOSITE
[ 359.805] (II) Initializing built-in extension DAMAGE
[ 359.821] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 359.821] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 359.821] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 359.821] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 359.821] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 359.821] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[ 359.821] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 359.822] (II) intel(0): Setting screen physical size to 338 x 211
[ 360.019] (**) Option "Protocol" "auto"
[ 360.019] (**) Option "Device" "/dev/input/mice"
[ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 360.019] (**) Mouse0: Device: "/dev/input/mice"
[ 360.019] (**) Mouse0: Protocol: "auto"
[ 360.019] (**) Option "CorePointer"
[ 360.019] (**) Mouse0: always reports core events
[ 360.019] (**) Option "Device" "/dev/input/mice"
[ 360.019] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[ 360.019] (**) Option "ZAxisMapping" "4 5 6 7"
[ 360.019] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
[ 360.019] (**) Mouse0: Buttons: 11
[ 360.019] (**) Option "Sensitivity" "0.7"
[ 360.019] (**) Mouse0: Sensitivity: 0.7
[ 360.019] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
[ 360.019] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 360.019] (**) Mouse0: (accel) acceleration profile 0
[ 360.019] (**) Mouse0: (accel) acceleration factor: 2.000
[ 360.019] (**) Mouse0: (accel) acceleration threshold: 4
[ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 360.311] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 360.311] (II) Synaptics touchpad driver version 1.3.0
[ 360.312] (--) touchpad auto-dev sets device to /dev/input/event6
[ 360.312] (**) Option "Device" "/dev/input/event6"
[ 360.312] (--) touchpad: x-axis range 1472 - 5472
[ 360.312] (--) touchpad: y-axis range 1408 - 4448
[ 360.312] (--) touchpad: pressure range 0 - 255
[ 360.312] (--) touchpad: finger width range 0 - 0
[ 360.312] (--) touchpad: buttons: left right double triple
[ 360.312] (--) touchpad: invalid finger width range. defaulting to 0 - 16
[ 360.312] (**) Option "TapButton1" "1"
[ 360.312] (--) touchpad: touchpad found
[ 360.312] (**) Option "SendCoreEvents"
[ 360.312] (**) touchpad: always reports core events
[ 360.312] (II) XINPUT: Adding extended input device "touchpad" (type: TOUCHPAD)
[ 360.312] (**) touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 360.312] (**) touchpad: MaxSpeed is now 1.75
[ 360.312] (**) touchpad: AccelFactor is now 0.040
[ 360.312] (**) touchpad: (accel) keeping acceleration scheme 1
[ 360.312] (**) touchpad: (accel) acceleration profile 1
[ 360.312] (**) touchpad: (accel) acceleration factor: 2.000
[ 360.312] (**) touchpad: (accel) acceleration threshold: 4
[ 360.312] (--) touchpad: touchpad found
[ 360.312] (**) Option "CoreKeyboard"
[ 360.312] (**) Keyboard0: always reports core events
[ 360.312] (**) Option "Protocol" "standard"
[ 360.312] (**) Keyboard0: Protocol: standard
[ 360.312] (**) Option "XkbRules" "base"
[ 360.312] (**) Keyboard0: XkbRules: "base"
[ 360.312] (**) Option "XkbModel" "pc105"
[ 360.312] (**) Keyboard0: XkbModel: "pc105"
[ 360.312] (**) Option "XkbLayout" "fr"
[ 360.313] (**) Keyboard0: XkbLayout: "fr"
[ 360.313] (**) Option "XkbVariant" "oss"
[ 360.313] (**) Keyboard0: XkbVariant: "oss"
[ 360.313] (**) Option "XkbOptions" "terminate:ctrl_alt_bksp"
[ 360.313] (**) Keyboard0: XkbOptions: "terminate:ctrl_alt_bksp"
[ 360.313] (**) Option "CustomKeycodes" "off"
[ 360.313] (**) Keyboard0: CustomKeycodes disabled
[ 360.313] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
[ 360.372] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 360.372] (II) AutoAddDevices is off - not adding device.
[ 360.373] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 360.373] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.377] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 360.377] (II) AutoAddDevices is off - not adding device.
[ 360.379] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/event9)
[ 360.379] (II) AutoAddDevices is off - not adding device.
[ 360.380] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/mouse1)
[ 360.380] (II) AutoAddDevices is off - not adding device.
[ 360.382] (II) config/udev: Adding input device Western Digital External HDD (/dev/input/event8)
[ 360.382] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 362.484] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 368.334] (II) Open ACPI successful (/var/run/acpid.socket)
[ 368.334] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 368.503] (II) intel(0): EDID vendor "CPT", prod id 5030
[ 368.503] (II) intel(0): Printing DDC gathered Modelines:
[ 368.503] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
[ 369.076] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 369.076] (--) touchpad: touchpad found
[ 441.972] (II) 3rd Button detected: disabling emulate3Button
output of glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_INTEL_swap_event
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
GLX version: 1.4
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 945GM GEM 20100328 2010Q1 x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 7.8.3
OpenGL extensions:
GL_ARB_copy_buffer, GL_ARB_depth_texture, GL_ARB_draw_buffers,
GL_ARB_draw_elements_base_vertex, GL_ARB_fragment_program,
GL_ARB_half_float_pixel, GL_ARB_map_buffer_range, GL_ARB_multisample,
GL_ARB_multitexture, GL_ARB_pixel_buffer_object, GL_ARB_point_parameters,
GL_ARB_point_sprite, GL_ARB_provoking_vertex, GL_ARB_shader_objects,
GL_ARB_shading_language_100, GL_ARB_shading_language_120, GL_ARB_shadow,
GL_ARB_sync, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_array_object,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array, GL_EXT_copy_texture,
GL_EXT_draw_range_elements, GL_EXT_framebuffer_blit,
GL_EXT_framebuffer_object, GL_EXT_fog_coord,
GL_EXT_gpu_program_parameters, GL_EXT_multi_draw_arrays,
GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels,
GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_provoking_vertex, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle,
GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1,
GL_APPLE_client_storage, GL_APPLE_packed_pixels,
GL_APPLE_vertex_array_object, GL_APPLE_object_purgeable,
GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3,
GL_ATI_separate_stencil, GL_IBM_multimode_draw_arrays,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
GL_NV_packed_depth_stencil, GL_NV_texture_env_combine4,
GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_OES_read_format, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
32 GLX Visuals
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8e 24 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x8f 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x90 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x91 24 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x92 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x93 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x94 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x95 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x96 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x97 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x98 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x99 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x9a 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x9b 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x9c 24 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9d 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9e 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9f 24 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa0 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa1 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa2 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa3 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa4 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa5 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa6 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa7 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa8 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0xa9 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xaa 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x5d 32 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
48 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x5e 0 tc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x5f 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x60 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x61 0 tc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x62 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x63 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x64 0 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x65 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x66 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x67 0 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x68 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x69 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x6a 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6b 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6c 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6d 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6e 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6f 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x70 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x71 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x72 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x73 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x74 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x75 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x76 0 dc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x77 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x78 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x79 0 dc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7a 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7b 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7c 0 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7d 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7e 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7f 0 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x80 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x81 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x82 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x83 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x84 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x85 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x86 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x87 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x88 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x89 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x8a 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x8b 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x8c 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8d 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow

Gusar wrote:
*sigh*
Do you have problems with anything that's *not* glxgears?
I have indeed not seen other problems. Presently the only other software that I believe use openGL that I use is googleearth; which run fine. Could it be a problem with glxgears?

Can not view (some) emails with attachments

There has already been some discussion about individuals getting the "This message has not been downloaded from the server" error.
http://discussions.apple.com/message.jspa?messageID=4983643
Has anyone found a solution to this problem? I am using GMail and am having problems reading (some) emails with attachments. I can read the first several lines through the preview view, but can not open (some) emails without getting the "This message has not been downloaded from the server" error.
The problem appears to be completely random. The problem occurs sometimes after I open the email on my computer, and other times it occurs before I open the email on my computer. And sometimes opening the email on my computer does not cause any problem opening the email on my phone.
I have seen this problem on two different phones now and have re-created the email accounts on both phone several times. But the problems keeps (eventually) appearing--for some, but not all emails.
 PowerBook G4, Macintosh 512K iPod nano (2nd Gen 8GB), iPhone (8GB)

So, I think things are actually sending/downloading and it's just taking time and the iphone is defaulting to the error message.
I don't think that's the case. I have several week-old messages on my iPhone (each under 300k) that still say "The message has not been downloaded from the server."
I've been connected to wifi for over an hour now, so that's plenty of time to downloaded these few small emails. I can read the "preview" of the message from the Inbox screen, but when I click on the message itself, I get the error.
And, those messages with the attachments that I was able to open this morning? I can no longer open them now. Very, very frustrating.

Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection

"[DBNETLIB] Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection"
After patches applied on patch Tuesday the database reports the above error.
All accounts are domain accounts and SQLServer uses Windows auth.
DCDIAG show no errors
All servers and DC have been restarted,
Message in db log confirms the connection is being denied due to trust.
Event log shows same rejection
Protocols enabled: named pipes, tcpip, memory
TESTS:
PortQry: "
TCP port 1433 (ms-sql-s service): LISTENING"
Connect with domain admin accounts works from multiple clients systems to DB.
Cannot connect with newly created domain admin account
Can connect if new admin account connect to server in terminal server session and uses UDL wizard or any other tool including isql.
New standard user also fails to connect.
NOTES:
I removed the SSL patch and the IE security update to see if that was an issue.
¯\_(ツ)_/¯

Has someone left the company or has an account of some nature been dropped/replaced?
Please click "Mark As Answer" if my post helped. Tony C.
Hi Tony,
Srry but No. We just installed the monthly updates.
I went back and found I had missed removing a patch. I missed the rollup for Windows Server 2003:
Event Type: Information
Event Source: NtServicePack
Event Category: None
Event ID: 4382
Date:  3/12/2015
Time:  12:26:04 PM
User:  NETTEST\admin
Computer: DATA1
Description:
Windows Server 2003 KB954920 was removed from your computer, and the previous Windows Server 2003 configuration was restored.
After I removed that is still didn't work but after about five minutes it started working.
I guess I ned to report that to MS after I research what might be changed to make the patch work.
Every time I get stuck and ask for help it seems to be just before I stumble on the solution.
Thanks for replying.
Well - maybe this will help someone else.
Thanks again for replying Tony
¯\_(ツ)_/¯

Use airplay with Apple TV without wifi connection

Is it possible to use the AirPlay feature on an iPad with Apple TV without being connected to the internet via wifi?
I'm thinking about getting my mom an iPad for X-mas later this year so that she can help some of her visually impared students. She has always wanted a good visual aid for all of her students and I figure that this would be the best solution. The only problem is that I'm not sure if she would have access to the school's wifi connection.
I would normally suggest that she use the HDMI adapter but the projector in her classroom is mounted on the ceiling and it would be a bit of a hassle to have to disconnect the cable every time so that the kids wouldnt play with it. So I figure if she can stream her content on her future iPad to the Apple TV wirelessly, she would be able to achieve what she has always wanted to do. I dont think she will be streaming anything to the Apple TV like youtube or anything like that but it would be a nice tool to have in the event that she wants to present something to her kids wirelessly from her iPad.

Unfortunately you can't send audio from the Apple TV to an airport express, but you can send audio from your mac/pc to the airport express via iTunes/Airplay, you could also send audio from an iPod/iPhone to the express. The express supports both optical and 3.5 mm in a unified port.

Can I increase the capacity of Time Machine with an external hard drive connected to Time Capsule?

Can I increase the capacity of Time Machine with an external hard drive connected to Time Capsule via the USB port? My current Time Machine has a total capacity of 1TB. I'd like to double or triple its memory. I don't want to use the external hard drive in lieu of the Time Capsule hard drive. I'd like to use it in addition to. Just don't know if/how it's possible.
This is another one of those questions that I've searched the web for answers, and have gotten tricky answers back. So now I'm trying to introduce a clean slate to the mix.
Thank you for your time!

Well, what you mentioning is possible. However, I don't know whether it's supported (as in, "easy to set up."). Time Machine officially supports backing up to a locally attached drive, to a machine running a Time Machine server (i.e. running OS X Server software), and to a Time Capsule. I don't know that it officially supports a drive attached to an AirPort or to a Time Capsule. Though I know some people have gotten it to work.
Best I can say is to try it. Plug the drive into the Time Capsule, ensure it's shared on the network, and then try and set it as a backup target from a machine in the Time Machine backup panel (you'll need to ensure it's mounted first). If it works, you're all set.

Problem with Lightroom 5: how to connect the app with my original pictures which are on a external hard disk and, once this resolved, how to create virtual pictures

A friend has installed Lightroom 5 on my MacBook air. he transferred all my picture that were on my IPhone an on Iphoto on Lightroom but without making virtual copies systematically. He put the original (real?) pictures on a external hard disk under Data_photos folder to allow more memory space on my Mac book Air. My problem now that when I connect the external hard disk with my computer the connexion does not happen automatically. it is like if Lightromm does not recognize the path to get connected to the original/real picture and therefore I cannot see pictures with all their potential and I cannot work on these. I am stuck! What should I do to 1) create this link? 2) create then virtual copies in order to be able to work on my computer without been obliged to connect my external hard disk to be able to use the application Lightroom. The friend who helped me disappeared! He is not in Japan and unable to help me.I hope you can help me. I have been looking for support to apple stores, photo shops, computer specialists but I have not found the expert capable to help me. I am leaving in Geneva. And believe that I should have some one with me physically to resolve a problem which I believe is not a serious one if one knows lghtroom an dinformatic basics... thank in advance to come back to me asap !!!!

Follow these instructions: Adobe Lightroom - Find moved or missing files and folders

My iphone 5 everytime i go into mail it comes up with - Cannot get Mail - the connection to the server failed- i then have to click ok - I am still receiving mail - it is driving me mad having to click this everytime - anybody else had the same ?

My iphone 5 everytime i go into mail it comes up with - Cannot get Mail - the connection to the server failed- i then have to click ok - I am still receiving mail - it is driving me mad having to click this everytime - anybody else had the same problem and have found a solution - only stated happening since iPhone was updated .

Hello there, Badboymbc.
The following Knowledge Base article provides some steps for troubleshooting mail on your iOS device:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Some problam with 127.0.0.1 connection

Similar Messages

Maybe you are looking for