Some problem about SAP R/3 ~ I need some detail solutions and suggests
I need some detail solutions and suggests about below these problems:
Problem 1: SAP Management Console cannot start successfully
Problem 1.1: Click on SAP Management Console, but yellow light continues for a long period of time.
Problem 1.2: In DOS, startsap command cannot start SAP R/3.
Problem 1.3: Oracle 9i database automatically shutdown by itself.
Problem 1.4: There is very low disk storage left (say less than 50MB) in the hard disk where Oracle 9i database is installed in the server.
Problem 2: Problems in User Maintenance and Security of the SAP R/3 System
Problem 2.1: Super user account password was lost (e.g. SAP* password was lost)
Problem 2.2: Super users DDIC and SAP* were dropped in table usr02 in Oracle.
Problem 2.3: Some users have been locked or deleted by an ABAP programmer who has been granted with almost superuser profiles. For example, an ABAP programmer has been granted a profile of SAP_ALL and SAP_NEW but the system administrator would like to restrict all programmers form using SU01, SU02, SM01, so that no programmers can maintain other user's accounts.
Problem 3: Problems in the configuration of client copy
Problem 3.1: A copied client from the Client 000 cannot be customized.
Problem 3.2: No sample data in IDES after a successful client copy.
Problem 3.3: Logging on without being authorized. A new client is created and client copied and transported successfully. However, anyone can log into the system using user SAP* with the default password PASS.
Problem 4: Problems in the installation of SAP R/3 Server
Problem 4.1: Computer Name of the SAP R/3 server has been changed after the full installation of Oracle 9i and SAP R/3.
Problem 4.2: A network card of a server was faulty and it was replaced by a new network card but the SAP R/3 license was expired.
Problem 4.3: You would like to reinstall SAP R/3 on a server which has previously installed with SAP R/3 but the same error message appears during the re-installation.
Problem 5: Problems in the backup and recovery of Oracle 9i Database
Problem 5.1: A redo log file was lost and the database could not be started.
Problem 5.2: A group of data files were accidentally deleted and the database could not be started.
Problem 5.3: Both the online redo log files and archived redo log files have been damaged.
Problem 6: General problems regarding the general operations and the connection to the SAP R/3 System
Problem 6.1: After a reboot of the Windows 2003 Server, SAP service is not automatically started.
Problem 6.2: Some users complained that the performance of SAP R/3 is really very slow.
Problem 6.3: A user complained that his/her password was correct but he/she could not lock on the client because it was locked.
Problem 2
2.1 If user account of the sap* is lost u can retrive by loging into os level as sidadm type this command
DELETE SAP<sid>.USR02 where BNAME='SAP*' AND MANDT=100
This 100 is the client in which u want to delete the sap*
after that restart the server and login as sap* with the default password as pass
there is also another way of doing this if needed u can catch me at [email protected]
Similar Messages
-
I need some detail solutions and suggests about below these problems ?
I need some detail solutions and suggests about below these problems:
Problem 1: SAP Management Console cannot start successfully
Problem 1.1: Click on SAP Management Console, but yellow light continues for a long period of time.
Problem 1.2: In DOS, startsap command cannot start SAP R/3.
Problem 1.3: Oracle 9i database automatically shutdown by itself.
Problem 1.4: There is very low disk storage left (say less than 50MB) in the hard disk where Oracle 9i database is installed in the server.3.1 - If you client copy from client 000, you need to go to SCC4 and set the client to customizing chnages allowed;
3.2 - If you do a client copy from client 800 (the one that SAP delivers data in) you should have data. Client 000 is empty (almost).
3.3 - You should be able to change the password of SAP* PASS user.
I am not sure which version you are dealing with, but ERP2004 and ERP2005 allow you to change the password suring installation.
Also, there is a parameter that can be maintained that allows you to log on as SAP*. If you set as not available, no one can log on.
Hope it helps,
Leonardo De Araujo -
I have iphone5s and there is some problem about my iphone. I turn off the phone and then I turn on. After I turned on, It showed the page of apple signal and then the page of loading. It used long time to show the loading page. Then it was back to page of apple and then loading page again many times. What happen with it? And what should I do?
Did you already try to reset the phone again by holding the sleep and home button for about 10sec, until the Apple logo comes back again?
If this does not work, try to set it up as new device, explained here:
How to back up your data and set up as a new device
You may have to connect in recovery mode, if the phone is not recognized in iTunes:
iOS: Unable to update or restore -
While trying to restore os x and erase content on my MacBook pro, some problem about voice software came up and the computer asked me to restart and try again by clicking restart button. When I did this, the machine went to a gray start up screen with an apple and will not progress. I've waited more than 30 minutes and tried restarting again by holding the power button. Also, restore cd 1 will not eject so the computer will no longer move past the gray screen with spinning circle. Restore CDs had never beeused and were still in packaging in the original box. Ran hardware test just to check, and it came back as normal. Now what? I live nowhere near a genius bar :(
computer asked me to restart and try again by clicking restart button.
That's called a kernel panic...
Since the install disc won't eject, try starting up while holding down the C key. If the Mac won't boot while holding down the C key, try ejecting disc by either holding down the mouse while starting up or holding down the Eject key while starting up.
Try booting from your install disc so you can run Disk Utility in case the startup disk needs repairing.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
(In Mac OS X 10.4 or later, you must select your language first from the installer menu)
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your startup disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. Make sure there is always 15% free space.
What is a kernel panic
Mac OS X Kernel Panic FAQ
Resolving Kernel Panics -
hi, guys. I have some problems with my ipad. It has been switched off and it does not respond on any my actions
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
-
I downloaded the 09 version without deleting the 08 (didn't know), and now I am having some problems : when I open a document, it opens with 09, and then when I try to re-open it with 08 it is not possible ! I have a message saying tha "the fichier index xml is absent" (my computer is in French. I want to work with pages 08 until I get familiar with the 09 version. What shall I do ? What does this happen?
Once you open the files in the new version you can't open them in the old version. Pick one version to use (have to be 9 now as you already have converted files)
-
how to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).
Because it was not possible to apply a gradient to a stroke in CS5. When you open the file in CS5, it is reduced to something that can be rendered in CS5.
-
I just started using fire fox and I can't figure out how to add a new folder to my bookmarks.
Can anybody explain how in detail (I'm bad with computers so I need real detail)
Please and thank you. :)If you use extensions (Tools > Add-ons > Extensions) like <i>Adblock Plus</i> or <i>NoScript</i> or <i>Flash Block</i> that can block content then make sure that such extensions aren't blocking content.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
You can use one of these to start Firefox in <u>Safe mode</u>:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
If it works in Firefox Safe-mode then disable all extensions (Tools > Add-ons > Extensions) and then try to find which is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Some question about SAP CRM consultant
Dear all,
I'm a center-based consultant in china.Our company is among the first batch to run SAP CRM in china in 2006.Our version is CRM 5.0.From my two years' working experience,the status of using CRM in our company is not very good.Complex UI,sychrorize problem makes our partner not willing to use this system.
I used to do some ABAP developing then i began to transfer to MM&SD.CRM work is the recent thing.During some months' work in CRM,i found i am more interesting in CRM.
I want to find a new job in outside consulting company in future.I want to focus on CRM.One aspect is that i'm interested in CRM.The other is that CRM is a new product and there is not so many people doing this.However,i seems getting some worries.First,SAP CRM seems not quite mature just from my understanding in 5.0 version.We need to develope a lot not just using User-exit.I don't know whether 7.0 has changed a lot.I've seen the UI of 7.0.It seems much better.But is it means more company will choose SAP CRM 7.0 other than Siebel?In china,there seems not many CRM projects now and i don't know the status in other countries.Second,CRM may have much differences from ERP implementation because there are many process which can't be solidified.
In one word,i'm worried about CRM consultant's future.And i hope gurus to give me the answers.THx.Hi Feng
It would be very intersting to clients as well as consultants to work on SAP CRM. Career wise you have ample opportunities in the same. With the advent of various features in CRM 7.0 version, SAP is now more user friendly and is easy to implement with lot many processes covered as a part of vanila offer.
I wish you all the best and hope this helps.
Regds,
Raghu -
Some problems about making USB boot
Hi AF!
I'm having really big problems about making a USB Install Key!
Its a 256mb (I will only use base) But how should I make the partitions??
After reading another topic - http://bbs.archlinux.org/viewtopic.php?t=18643
I still having some problems - Normally I would say the whole USB key should be FAT16 - is that correct or how should I make this ????
Another part is about making the bootloader ?? Should that be Lilo or should I use the mksysconfig. If I use lilo with /sbin/lilo -M /dev/sda - I get the error upon boot - this is not a bootable floppy or disc??
And if I use mksyslinux?? - well not sure I'm using the correct command - so how do I use this ???
Thanks
Pequewell its been some time since i did this but if memory serves well
make sure that in /etc/mkinitrd.conf the USB= " " <thats blank not
USB=1
i believe i told mkinitrd to install all the usb modules i needed even then i had to use initrd-full.img
also i needed mdadm installed
i ran lilo on my pen grub just wouldnt work for me it installed but couldnt find what to boot . lilo would boot up on the machine i installed it on but wouldnt boot on ant other machine never did figure that out , my thoughts went else where at that time & havent gone back to it yet.
thats what i remember how much pertains to you i dont know hope this helps -
Some problem about integrated ITS 640
How to change Webgui theme in integrated ITS 640
Dear all ,
My system is ECC5,the Package level it SAPKGPRC05,SAPKB64015,SAPKA64015,SAPKH500010.
now, I configure integrated ITS with T-code SICF .
I create a external aliases "/sap/bc/gui/sap/its/webgui" ,aAfter that I can connect to the
ITS with the following URLs:
http://<AppServer><domain>:<port>//sap/bc/gui/sap/its/webgui
But now ,I have some problem cannot solve as follow:
1 When I logon ITS, the default language is English ,only English and Genman may be
selected,The requirement is that I want to use other language as the default logon language.
When I on the pop-up dialog box "Change External Alias" tab " Service data" ,"Anymous Logon
Data "select a Language "Chinese",the system pop-up a message box show "code page not
supported".how can i configure the default logon language ?
2 I hope use "https"-- Security Reqiurements ,as a security link ,so I selected "SSL",aAfter
that I can connect to the ITS with the following URLs:
https://<AppServer><domain>:<port>//sap/bc/gui/sap/its/webgui
IE show cannot find the web system .
And use the following urls:
http://<AppServer><domain>:<port>//sap/bc/gui/sap/its/webgui
only show the logon page and notice the error "Logon not possible; none of the active logon
procedures is possible"
and how can I configure the "https" ? and must configure with se38 "W3_PUBLISH_SERVICES"
program together ,if like that ,i must republish all of the component again ?
3 I hope change the webgui theme , in ITS620 have theme 00,90 ,99 .and we can select
"EnjoySAP". but in integrated ITS 640 , i donot know where to find the its admin page to
setup the theme . can you tell me how can i find the admin page to setup the theme .
thanks all ,hope your reply !
Message was edited by:
Benson LuHi,
Hope this Information is useful.
The SAP Integrated ITS only supports the new "Tradeshow" design (unlike the "standalone" ITS which also supports the well-known EnjoySAP design). The new design is more easily incorporated into the Enterprise Portal and is better adapted to the design of other SAP Web UI technologies (BSP, WebDynpro).
There are also changes to the header area in SAP integrated ITS in Tradeshow: The menu bar and standard toolbar functions are collected on either side of the transaction code field in the buttons "Menu" (on the left) and "System" (on the right). The application toolbar elements are then displayed to the right. Instead of symbols, the system displays the text description. If there is insufficient space to display all buttons, you can display the other elements by choosing the "More" button to the right of the screen.
Exceptions:
In Release 6.40 (NetWeaver 2004) , the new design is only available for the Internet Explorer. As of Release 7.00 (NetWeaver 2004s), it is also available for Firefox and Mozilla Browser. For this reason, the Enjoy design continues to be supported for Mozilla and Firefox in Release 6.40 (but only for these browsers, and even then only for this design, and not Tradeshow).
Furthermore, in Release 6.40, there are some Internet Application Components (that is, Web applications that build on the ITS), which continue to be displayed with the "Enjoy" design. Of course, the "Enjoy" design continues to be supported for these applications.
You can use SITSPMON Transaction to monitor the integrated ITS.
Thanks,
Tanuj -
hi everyone:
I have a problem about ALV. The question is I want to show two headers in the gt_item .(Hierachy)
I want to use these in the event "change_fieldcatlog"
LOOP AT I_FIELDCAT.
CASE I_FIELDCAT-FIELDNAME
WHEN 'MESSWERT'.
I_FIELDCAT-ROW_POS = 1.
I_FIELDCAT-SEL_L = '1111'.
I_FIELDCAT-SEL_M = '1111'.
I_FIELDCAT-SEL_S = '1111'.
APPEND I_FIELDCAT.
so I want to add another label in the next row. but I write like this below , it doesn't work .
I_FIELDCAT-ROW_POS = 2
I_FIELDCAT-SEL_L = text-004.
I_FIELDCAT-SEL_M = text-004.
I_FIELDCAT-SEL_S = text-004.
APPEND I_FIELDCAT
ENDCASE.
ENDLOOP.
So who can help me ?
thank you in advacne .
Regards
NickHii Nick, in your program I found that you have created only one fieldcat structure, actually we need 2 structures one is for workarea and one for body.
like this
It_Fieldcat type SLIS_T_FIELDCAT_ALV
Is_Fieldcat type SLIS_FIELDCAT_ALV
now you can write the code
LOOP AT It_FIELDCAT into Is_Fieldcat.
CASE Is_FIELDCAT-FIELDNAME
WHEN 'MESSWERT'.
Is_FIELDCAT-ROW_POS = 1.
Is_FIELDCAT-SEL_L = '1111'.
Is_FIELDCAT-SEL_M = '1111'.
Is_FIELDCAT-SEL_S = '1111'.
APPEND Is_FIELDCAT to It_Fieldcat.
clear Is_Fieldcat.
Is_FIELDCAT-ROW_POS = 2
Is_FIELDCAT-SEL_L = text-004.
Is_FIELDCAT-SEL_M = text-004.
Is_FIELDCAT-SEL_S = text-004.
APPEND Is_FIELDCAT to It_Fieldcat.
Clear Is_Fieldcat.
Hope it will works.
Reward points if helpful. -
I have some problem about wifi sync with iOS5
Hi~everbody~
I have some problem with wifi sync, and still don't know how to resolve it. Please Help Me~
First,I using Windows 7 64-bit, the latest iTunes 10.5, and iPod touch 4 with 5.0(9A334), and of course a WIFI AP in my room.
Here is my major problem:
When I setted up enable wifi sync in iTunes summary, the iTunes had identified my iPod and show at left side in iTunes,
even when I unplug my iPod touch 4 from my computer, the iTunes still shows there.
But after one day when I came home, I opened the iTunes want do a wireless sync, but the iTunes did not found my machine.
I have tried restart computer, restart WIFI AP, disable anti-virus software, close MSN, close teamviewer, and any software may caused some unstable network issue between iTunes and iPod touch 4, but when I done these whole things, the iTunes still not found my iPod.
So I want to know do Wifi Sync needs any specific net port ? like 80 port or some port else?
Wish there are somebody can help me fix this, very appreciate.
BTW: Even iTunes did not found my iPod touch 4, but I can still using "Remote App" to control iTunes music play, so I really confuse why it just can't do wifi sync ?This error has got nothing to do with rmi.
The StackOverflowError means the Java VM stack is filled up. The
stack is used for keeping track of method calls. An easy way to
produce a StackOverFlowErrer is the following code:
class Test {
public static void main(String[] args) {
a();
static void a() {
a();
So if you call method a() within the same method, the stack
fills up quickly. -
Some questions about SAP esourcing
Hi expert,
I have one question about SAP eSourcing. In RFQ document, before RFQ award is published, our customer do not want the price of RFx response disclosed to collaborators. After the award is published, the price can be released to collaborators. As I know, we can use page customization to hide page field. But the price is collection field. So I failed to use page customization to hide it.
Pls advise me how to realize it.Hi
Please go through the relevant pointers ->
eSourcing covers some scenarios in SRM for Bidding and Auctioning.
Have a look at following link for some infos:
http://help.sap.com/saphelp_srm50/helpdata/en/56/c34e3c59bfe747e10000000a11402f/frameset.htm
Re: e-sourcing
eSourcing 4.2 - Page Customization/Extensions
Re: eSourcing withSRM or eSourcing with ECC?
Hope this will help. Do let me know.
Regards
- Atul -
Some problem about FCoE with N7000
Hello every one !
I`m a Network guy and I think I`m a fresh for storage. I`m config a FCoE link on Nexus 7000,but there is something wrong and I need some help from you !
==============================================================================================
Problem:
1. I can built a storage VDC , but I can`t enable " feature fcoe " , but "feature-set fcoe" is okay
2. when cheak interface status ,It appear :
xxxxxxxx# show int e3/39
Ethernet3/39 is down (Internal-Fail errDisable, fcoe_mgr: ethernet interface module is not licen)
===============================================================================================
my software version is 6.1.2 and line-card is N7K-F248XP-25E ,and is my license:
xxxxxxxx# show license usage
Feature Ins Lic Status Expiry Date Comments
Count
MPLS_PKG Yes - Unused Never -
STORAGE-ENT Yes - Unused Never -
VDC_LICENSES No 0 Unused -
ENTERPRISE_PKG No - Unused -
FCOE-N7K-F132XP No 0 Unused -
FCOE-N7K-F248XP No 0 Unused -
ENHANCED_LAYER2_PKG Yes - In use Never -
SCALABLE_SERVICES_PKG Yes - Unused Never -
TRANSPORT_SERVICES_PKG Yes - Unused Never -
LAN_ADVANCED_SERVICES_PKG Yes - In use Never -
LAN_ENTERPRISE_SERVICES_PKG Yes - Unused Never -
=================================================================================================
It is a license problem ? Please help me ,Thanks Very much!Please confim below things.
1. On the switch make sure that fcoe feature-set is isnatlled -
install feature-set fcoe
2. Make sure that, you have allowed fcoe feature-set for the storage vdc
conf t
vdc
allow feature-set fcoe
3. Make sure that the module you are using is licensed for FCoE
conf t
license fcoe module
Hope this helps.
-Ganesh
Maybe you are looking for
-
Method SAP_WAPI_WORKITEM_COMPLETE not allowed for type F
Hi Gurus I have created a webdynpro abap application in which these steps 1. Application triggers the workflow and workitem got created through FM1. 2. Workitem loads up webdynpro abap application from portal or outlook by changing settings in SWFVIS
-
Firefox crashes when trying to access Printer Properties
I have a Dell AIO Printer A920. I have never had printing problems with Firefox until I upgraded to Firefox 4. I am having a few problems now. The whole page is not printing anymore even though it is set to Shrink to Fit. I have to adjust the scale i
-
Half of my screen is dark and i have an iphone5c
Does anyone know how to take this off?
-
Hi, I had done an uploading using call transaction method. I had handled the error records in Exel sheet. But the requirement is to show only the record having the error field. For example if we have an error record like Rec no date Be
-
Error Message no. RSBOLAP018 Encountered during Infomation Broadcasting
Hi Gurus, While Doing Broadcasting a Report from Portal, the background job (in sm37) is failing with the following error: Message no. RSBOLAP018 -- Java system error: max no of 100 conversations exceeded / CPIC-CALL:'ThSAPCMRCV' : cmRc=17 thRc=450