Some problems and questions

I have some problems and questions about my MSI MEGA PC 180 system...
One problem is that MSI live monitor only works one time after every new installation then is just say "The URL is invalid" every other time I try to search for updates.
One problem is that one of the fans doesn't turn off when I turn of the computer and the only way to get i to turn off is to turn on the hifi mode and turn it off then the fan stops. And some times the fan can start after a while when the computer has been turned off.
There are two fans for the cooling of the CPU but PCALERT only shows the speed of one of them.. why? according to the manual one of the is called CPU fan and the other one is called sysfan but only CPU fan showes i PCALERT.
Are there no other way to control the Tv other than with the Home Teather system than I find way to slow if you use 1280x1024 resolution on the screen like I do. And are there no way to sort and remove channels in home teather? As i is now I can't move the channels in the order I want and I can't remover channels that the auto search thaught was channels but aren't?
An other thing that I find annoying is that the fullscreen mode of home teather doens't cover all off the screen it doesn't hide the systray and leaves a small but annoying kolumn to the right that showes the backgrund and that is very annoying to watch tv if you have a light backgrund because the kolumn are so bright.

Welcome Kabbo,
I see you agree that MC III is far from perfect. Perhaps you can try the combination of Media Portal and Ir2Key. Just read some of the other posts including "WinIRX.ocx internals/usage" by ddookie. Another possibility is to try Dscaler, but this program is only for watching TV.
Regarding the processor fans: its normal that only one of the two shows up in PcAlert; when you look closely to both fans you'll see that one has only a two-wired connection.
The problem of a fan not shutting down is new to me, I suppose you have checked the connections to your mobo?
Greetz,
JaDi

Similar Messages

Some problems and questions using OWB

For Igor or anyone who can help me :-)
Hello Igor,
Thanks for all your help concerning my mapping deployment problem! Now its working better ;-)
I used the OWB Runtime Assistant to create a new runtime target schema and i use the owner of this schema as user while logging to OWB.
Now i can create and deploy without problems mappings, tables, functions, procedures, packages, dimensions, views, materialized views, process flows (i have installed the Oracle Workflow Client 2.6.2.0.0 with OWF builder and OWF mailer ).
However I have still some problems and questions :-)
a) After deploying a mapping or process flow i can execute them from OWB Deployment Manager. How can i schedule the execution of a deployed precess without using OWBDM ? (I want to execute a process every day to perform ETL).
b) I think i have a problem deploying cubes. I create a cube in OWB, the validation is OK, the deploment succeds, but if i look with OEMC in the tree in the Warehouse OLAP section no cube is created. Only the fact tabe is created. If i look to the scripts from the Pre Deployment generation results i found DDLs only for TABLE, INDEX, UNIQUE KEY, FOREIGN KEY and ANALYZE object types, meanwhile during a dimension deployment i found also a DDL for the DIMENSION type object. WHY ?
c) If I look in the procedures of the new created OWB Runtime Target Schema I found 3 procedures which are in error and when I try to compile them I receive the following error messages :
- procedure WB_OLAP_LOAD_CUBE
PLS-00201: identifier 'DBMS_AWM.CREATE_AWCUBELOAD_SPEC' must be declared
- procedure WB_OLAP_LOAD_DIMENSION
PLS-00201: identifier 'DBMS_AWM.CREATE_AWDIMLOAD_SPEC' must be declared
- procedure WB_OLAP_LOAD_DIMENSION_GENUK
PLS-00201: identifier 'DBMS_AWM.CREATE_AWDIMLOAD_SPEC' must be declared
How can solve this problem? Is there any link with the fact that the cube is not generated?
d) When I first acces the deployed DIM in the OEMC tree I receive a message saying that the dimension does not have complete metadata as needed for use by Oracle OLAP services (because is created either in an earlier version of Oracle database or it was created by an an other application than OEMC) and OEMC automatically generates the default needed metadata. Is this normal ?
I work in an environment with
- Oracle 9i Database 9.2.0.1.0
- Oracle 9i Client 9.2.0.1.0
- Oracle 9i Warehouse Builder Products 9.2.0.2.8
Best Regards:
Vlad
PS Sorry for my poor English ;-)

Answered in your "Getting RPE-01008 when deploying mappings" post.
Regards:
Igor

Resizing and editing Components Design - Some problems and questions at CQ5

Hello everyone,
I'm building a website application following the http://dev.day.com/docs/en/cq/current/howto/website_quick.html guide (using the cq 5.5). The thing is, when I drop an image component on the site and drop some image into this one, the component resize my image. Even if I double click the image component and change the size, there's kind of a "maximum" size. I don't wanna change this one by css properties because if my user change the picture or drop a new one in the page, the change will not be applied to this new one.
So, my question is, there's a way to configure the component to get the size i'm inputing on the dialog, without "limits"? Below some images of what i'm doing.
The second problem I found is with the "text & image component". I've inserted the "right" alignment for the image in the styles tab, but the image stays on top of the text, and there's nothing I can do to solve this in the input dialog. Don't wanna use the css for the same reason that I've explained before.
All the components are imported from fundation.
So, there is something I can do to change the design of my components?
Thanks in advance,
Matheus de Oliveira.

For the issue you are having with the maximum size there are couple of possiblity.
The firstpossiblity is that your CSS is enforcing a maximum size. So to check this take the src from you img tag and put in a browser and see if you get the original size or not. If you get the right size when viewing the image URL than you do in the page than the issue is CSS. Depending on how you have designed your site's CSS there might be any number reasons it's limiting the image size but whatever the reason it's an implementation question.
The second option is that design mode of the image component. The default install has a maximum image size set in design mode of the image component. Switch your page to design mode and verify that the maximum image size is not set in the design dialog.
A final option is that the DAM is enforcing the maximum size. In CQ 5.5 the default configuration is to create a web ready rendition with a maximum height and width fo 1200 x 1200. The out of the box components and the out of the box image rendering script will use this web ready rendition if it is present rather than the original image.
To check if this is your problem do the following:
Go to the workflow model console and edit the Update Dam Asset workflow.
Delete the step in the workflow named Web Ready Rendition
Upload a new image that is larger than 1200 x 1200 to the DAM
Try and use that image in an image component - it should display at the original size.

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

i don't know how they solved it, i'm having the same problem on Windows XP
EventType : BEX
P1 : iTunes.exe
P2 : 10.7.0.21
P3 : 504d85d9
P4 : unknown
P5 : 0.0.0.0
P6 : 00000000
P7 : 08920740
P8 : c0000005
P9 : 00000008

HT5622 Sir, yesterday I'm trying to purchase an app but there is some problem and 300 bukes dedeticted from my account , why?

Sir, yesterday I'm trying to purchase an app but there is some problem and 300 bukes dedeticted from my account , why?

This is primarily a user-to-user support forum. You can report a billing problem at https://reportaproblem.apple.com or contact iTunes support at https://getsupport.apple.com/Issues.action

Hi having some problems. flashing question mark!!!!!!!!!!!!

hi iv been having some problems with my mac i was unable to start it up which had the new os x operating system was on it. it had a dreaded flashing question mark on startup. So i did the hold down option key start up manager thing. no luck it couldn't find the disk. So i looked on disk utility and got the message
Invalid B-tree node size
Volume check failed.
Error: Filesystem verify or repair failed.
disk would not repair. so intalled again on my other hard disk to get it up and running again. its sorted now but cannot get the old data off the original hard disk. it is still showing up on disk utillity but carnt do anything with it.
hmmmmmmmm should of backed it all up me thinks...
do you think i could retrive data on this?
can anyone help me out on what to do i dont have a clue.
cheers Jamie
Message was edited by: jamie8286

Hi Jamie, It sounds like the directory is corrupted or your HD is going bad.
Did you check the system profiler and see if the S.M.A.R.T passed. Do you have TechTool or Disk Warrior? There are some programs out there that will allow you extract information from a dieing drive.
The flashing question mark is telling you that it cannot find a functional operating system. And disk utility will only repair drives with a bootable OS.
I know you said you did but, did you boot _from the install disc_ and run disc repair?
I'll see what software for recovery there is for free.....

A few Lenovo n 200 problems and questions

I appreciate any help given
1. I cant seem to find how to change The brightness of the screen theirs no reduce screen brightness button Help
2. i got with the computer Geforce 7300 go video card and i dont know how much ram i have im getting mixed messages about the ram amount help
3. i got intel T2330 duo core processor it saids that i have 1.6 GHz should i multiply it to 3.2GHz cause i have two cores
4. My battery dont seem to Recharge i leave the power cable plugged in all the time if i unplugged it the computer power offs immediately
thats about all the questions and problems i have
some of the questions kind noobish i know

1. Fn+F10, Fn+F11
2. XP or Vista?
3. No
4. Probably need a new battery.

K7N2-L motherboard problems, and questions!

I'm not sure if this is the right place for this, but I think it is.
I have a K7N2-L motherboard that is giving me fits! I can't find this board in the data base to try and trouble shoot my issue, either.
Here's my questions:
Problem 1) There are three empty spaces in the floppy drive connection (plug) of this motherboard. Two of the spaces are in the second row, and are side by side, and don't appear to have ever had pins installed. This may be normal. These two empty spaces (blue X's) correspond to spots that don't even have holes through the motherboard to even install any pins. However, the third missing connector pin does appear to have had a pin soldered into it (red X), but now there is no pin. Also, when I attempt to start the system, the motherboard does post and will allow you to enter the BIOS set up. However, at the same time, I get a "Floppy Drive - FAILURE" warning during this part of the start up. This indicates to me that the drive is not being detected, and it may be caused by the suspected missing pin (red X). Here is a crude visual of the floppy plug lay out in question. The green I's indicate existing pins, and the X's the missing pins. The blue X's are the ones that appear to never have had pins, but the red X appears to have had a pin, as it's soldered, but is missing. Please, note the notch at the top of this crude illustration for proper orientation of the plug. If you have any info on this, please, give me some insight as I can't find any way of referencing this problem.
----------- ------------- ^ motherboard edge is here ^
I I I I I I I I I I I I I I X I I
I I I I I I I I I I I I I I X X I
Floppy Connector Layout
Problem 2) It's possible this problem is a BIOS problem, and could be corrected with a BIOS update. However, since I don't currently have a floppy drive, I can't update the BIOS. I've set the BOOT priority in the BIOS as, 1-Floppy; 2-CD-Rom; 3-HDD0. However, the board selecting the devices in the proper order, and thus I can't get any of my drive to boot from either a CD or a Hard disc. I do know that the processor I'm using is good, as it came out of another operating system board. The processor is an AMD Duron 1800/266 FSB. Here's what is being seen with the BIOS with regards to the processor. If, in the BIOS, I set the FSB to 100MHz the processor shows as a 1200MHz processor instead of an 1800. However, when I reset the BIOS FSB to 133MHz (as it should be) the BIOS now shows the processor as a 1900+. Neither of these is correct. Any ideas as to what may be going on?
Thanks in advance.........
kudzu48

Hi
I just checked 8 motheboards that I have laying around from MSI, Asus, Intel and Biostar. The pin location that you have marked in red does not have a pin in it. The ones that you marked in blue do have pins in them. If you are not the original owner, it may be that someone tried to replace a couple of broken pins and gave up.
A bios update should take care of the failure to recognize your Duron 1800. I have provided a link where you can see the later bios revisions.
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=393&kind=1

Zone setup in solaris 10 some problem and doubts

Hi Experts
I have small problem and doubt
If i login to global zone ... "zlogin -C -e @ testzone" how to logout from global zone......
testzone# when i press exit button it is comeing to zone login prompt
zone1 console login: @ ( from Zone login prompt i want to come
back to my normal solaris prompt i tried with pressing "shift+@ "
nothing is happening could you please tell me how to come out from zonelogin prompt ................
one more query after installation we are using " zlogin -C -e testzone "
is it rquire this same login commmand we have to use every time or only one time after installation of zone. we can use
"zlogin testzone " also what is difrrent these two... if you use " zlogin -C -e testzone " then only it will prompt for locale and language settings......
i have seen it is asking for locale setting and language ...... and it is asking only one time but if you use "zlogin testzone" it won't ask any such seetings......( only one time it will ask after the zone configuration)
Thanks
RK

This particular forum is for issues with applications, daemons
and applets that provide reports to you about a system state or condition.
Sun Remote Servies and Net Connect, are some of those reporting services
that you would subscribe to from Sun Support.
This is NOT a forum for you to report about an issue.
None of your postings, thus far, are within the scope of this particular forum.
For example, this latest thread would be better suited in the forum for Solaris Zones.
Put some planning into your posts and place each one into its appropriate place.

PlayBook .. problem and question

hi
I have a problem and a question
the problem is i connect my bold 9700 with the playbook by the bridge. it connected sucsseful and i can open the files, messeges, notes, calendar.. etc. the problem is the bbm cant opened. it stuck in the loading wheel screen. i wait for more than 30 min. but nothing happened.
the bbm version is 5.0.3.22
the bridge in the bold is 1.0.0.83
the playbook software is 1.0.3.1868
thanks

Well, I'm surprised that this is playing you up. Anyway, before doing anything else I'd try deleting ALL bluetooth associations on the BB and the PB, uninstall the Bridge App. Reboot both devices and try again. You never know...
If it STILL doesn't work:
I'd suggest a couple of things.
1 - I'm running 6.0.0.534 with no trouble - give that a go. Backup first, obviously.
2 - Try installing and connecting the Bridge before you restore all of your data and apps. If it works, then restore and try again.
I'm working on the assumption that either that particular OS is causing trouble (unlikely), or that there is something on your phone that is meddling with the Bluetooth connection somehow.
Good luck!
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!

PC Suite Problems and Questions with 9500...

Hey guys,
got some problems with the Nokia PC Suite and my 9500.
I am using...
Nokia PC Suite 6.80.22
Communicator 9500 FW 5.22(7)
Windows XP SP2
Microsoft Outlook 2003 with all updates
(1) When i synchronize my 9500 with Outlook using the PC Suite (i only update in one direction) it doesn't update all contacts from the phone to outlook - some are still missing in outlook while being present on the phone
(2) Most of the contacts are not updated properly into Outlook - e.g. when my contact on the phone has 4 cell phones it just updates 1 cell phone number into Outlook, probably 'cause Outlook just has one cell phone field... Anyway around it or to fix this problem ?
(3)When a contact was already established and synchronized to Outlook and I later changed or added data in the contact on the phone (e.g. added an email adress) - when i synchronize to Outlook it will not update the new Contact Information from the Phone in the Outlook Contact Card
(4)When i view my Contacts in the PC Suite using the Phone browser it shows all names - but the contacts that have only a Company Name and no First and Last Name are blank in the field name and only shown by number (which makes it impossible to guess who it is) - any way to see the contacts in the PC Suite also by Company Name (and by Last & First Name) ?
Thanx anybody for your help !
Mike

I too, have many of the same problems: constantly reminded to "Install" the apps I have already done so (and paid for); Market Assets asks for me to become a paid member (I am); Adobe Bridge is missing from the apps page. I have reinstalled CC several times. Frustrating is the kindest word I can say--I seem to spend more time reading the "help" and discussion boards rather than working on photos. Dear Adobe, wake up and give us some solutions here! I too, have been using Adobe PS for years and UGH! CC is a mess and truly a bad experience for me! I apologize to the user above (RGMeyer) I could not be helpful, rather I am only adding fuel to your frustration.

Interop problems and questions

Hi,
I am trying to interface our engine with flash through flascc, but I encounter some problem with the interop.
I see that there is three way to do interop. The inline assembly way, (inline_as3() macro) and two more C++ way.
The as3/as3++.h way
                    Example:
                    AS3::local::var propertyName = AS3::local::internal::new_String("x");
                    AS3::local::var newValue = AS3::local::internal::new_int(100);
                    AS3::local::internal::setproperty(mc, propertyName, newValue);
And the Flash++.h which wrap all the flash api with C++ object.
The inline_as3 way is nice, it's more readable than the as3/as3++.h way, I would prefer the Flash++.h way, but it would do okay for my need. I can compile basic example with int for example, but as soon as I use flash api classes :
Error: Type was not found or was not a compile-time constant: MovieClip.
var foo:MovieClip;
        ^
The code provoking this was :
                    inline_as3("import flash.display.MovieClip;\n"
                                                  "var foo:MovieClip;\n"::);
The as3/as3++.h way work great, but is the less elegant to me, I need to marshall every variable and I can't call directly the functions and properties, I need to query them and pass them to the call/call_v function afterward. It works great and I will fallback to it if I can't use the two other options, but I'd rather not to. Also the var marshalling/function query overhead seems to be less performant than the inline_as3 way. Maybe I am wrong about this last point, since I don't know the details about the implementation. Maybe this marshaling/query thing is done either way, one manually and the other by the compiler or flash runtime. Do I suffer a performance hit by going this way?
The last way seems like the best way to me. Auto-completion from my ide, easily readable, statically typed, etc. But, we have a couple of problem with it.
-The swc double in size (Which isn't a deal breaker to me, I know that there isn't much to do, but still... it's double)
-The link time go through the roof, it cripple our workflow a bit.
-The biggest problem, I can't take the swc outputed by flascc and merge it with another swc using compc.
The last step of our makefile is merging a normal swc with a flascc swc. I could work around it and just use both swc separately, but it works great with the first two interop way I don't see why using Flascc++ should prevent it. It result in a insanely long compc step, that abort after 10 minutes with this error :
Error: Java heap space
So,
-Do you have an idea why I can't use flash.display classes with inline_as3? (I tried with MovieClip, Sprite and Graphic.)
-Is the as3++.h way less performant than the other two ?
-Do you have an idea why I can't merge my two swc with compc when I use Flash++.h classes?
EDIT:
Sorry, I was wrong. I do not merge two swc with compc, I just add a AS3 class to it, like this :
"$(FLEX)/bin/compc" -include-libraries=$(BUILD_PATH)/temp.swc -include-classes=EntityHolderMovieClip -source-path . -debug=true -o $(BUILD_PATH)/BaconBox.swc

No I wasn't, I can see why it is a problem, but even when I am using it, it doesn't work. Here is my call to g++ :
"/cygdrive/c/flascc/sdk/usr/bin/g++" ../../../BaconBox/Components/Flash/MovieClipHolder.cpp -c -Werror -Wno-write-strings -Wno-trigraphs -DTINYXML_USE_STL -I../../.. -fllvm-llc-opt=-ascopt=-import -fllvm-llc-opt=-ascopt=C:/flascc/sdk/usr/lib/playerglobal.abc -I../../../libraries/FreeBSD/i686/include -o ../../../build/BaconBox/Components/Flash/MovieClipHolder.o
I compile all my .cpp as .o before linking them together.
It does work when I add the -emit-swf option (but afterward my link phase crash for obvious reason).

T30 Problems and Questions

Ok I have a T30 that I do not know what could cause the problem and thought I could post the question here and see what other users could recommend trying.
First off all Keyboard functions work properly.
Second the power button and such works properly
Now the led lights for power, hard drive activity, battery indication, these do not work.
I think the power button and these LED's are on the same board, although I could be wrong. But it just seems odd that none of the LEDs including the ones on the lower side of the display are working.
Any ideas on what could cause this? Anything I can check? All assistance greatly appreciated.

It's been years since I've last opened a T30. And even back then, I was not playing around with the fuses.
To make one thing perfectly clear: these fuses are *NOT* meant to be user replaceable and you're looking at a board level repair involving components that are beyond tiny. Unless you're very experienced with a soldering iron, you may just want to get a replacement board or an entire barebone T30...at today's prices, that's what I would do.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

E50 problems and questions

Hello, I have a few questions aboyt e50.
i own to phones model e50 and this is what i need:
- big font size for contacts
- is there any way to have wireless on e50?
- the multi task doesnt work ... i tried to upgrade the software...but the same problem
- and the last question is:
how to activate PTT? is says to check the settings...but i dont know these settings.
thanks.
Message Edited by alexrose on 26-Jan-2008 01:37 PM

You cannot increase the font size of S60 3rd edition handsets as it is not a feature they support, you can however download an application called font magnifier from Nokia Software Market http://www.softwaremarket.nokia.com
You unfortunatlye cannot get WLAN for the E50-1 either as there needs to be hardware support for this feature too. The E50-1 was the entry level Eseries handset more voice centric therefore no 3G or Wi Fi.
As for the multi tasking, all S60 devices support multi tasking, simply hold down the menu key to open task bar, if you need to minimize an app and keep it running in the backround, simply press the menu key once when in that app, do whatever you need to then hold down the menu key again and select your previous app from the task bar to continue!
PS: Don't keep to many apps running to prevent slowness and?or freezing
iPhone 5 32GB
MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4

Udev kernel 2.6 boot problems and questions

Hello there.. During these days I'm trying to install a new linux kernel. I have the insane Idea of installing an old kernel. I compiled the "new" old kernel and I can't manege to get it to work efficently..
I keep receiving a message this message during the boot.
Failed to start udev Kernel Device Manager
Although I followed the requirements for undev related to the kernel 2.6
Why am I trying to install and older kernel? Well, the my reason is simple: my laptop keyboard that it's so annoying.. Every once and then it's not recognized at boot and it force me to reboot the system even for 4 or 5 times consequintely..
With the kernel 2.6 I never had such problems and so I thought It was worth trying..
Another interesting question that keep coming to my mind is related to the kernel that it's been update after pacman -Syu.
I notice that in /usr/src there is a a new directory eithe the new kernel called linux-3.9.5-1-ARCH, well if I try to build the kernel inside thi directory I get a message
linux-3.9.5-1-ARCH]# make
scripts/Makefile.build:44: /usr/src/linux-3.9.5-1-ARCH/arch/x86/syscalls/Makefile: No such file or directory
make[1]: *** No rule to make target `/usr/src/linux-3.9.5-1-ARCH/arch/x86/syscalls/Makefile'. Stop.
make: *** [archheaders] Error 2
The linux-headers are seems to be correctly installed to me...
Any Idea or explanation or suggestion would be very appreciated.
Thank you

Arch userspace is too new to survive with an older kernel. This isn't going to end well for you.
If you want your keyboard to function properly, I suggest you file bugs against the relevant parties and work with them to get actually get it fixed rather than go down this bizzare rabbit hole.
edit: even our LTS kernel (3.0.x) is too old for Arch userspace.
Last edited by falconindy (2013-06-14 15:00:23)

Some problems and questions

Similar Messages

Maybe you are looking for