Some problems in printing.

While using the microsoft developer studio and printing few files theres a name that can be seen on the computer that is printer hp 915 on ne12 what does 'ne' mean? and only in microsoft developer studio this name can be seen or else everything is being printed correctly. if one can give suggestions it would be nice.

How close to the edge of the paper is this missing text?
Most printers do not print right up to the edge with usually a large non-printing margin at the foot of the page.
Peter

Similar Messages

  • Problem with printing some report

    hi very body
    we have some problems with printing some reports.
    the problem is when printing a report the computer processes stoped
    and i should restart the computer a gain to print the report for first time and
    then in the second time i have same problem.

    Maher,
    You can check out the new printer driver test utility verions2.0 on OTN at:
    http://otn.oracle.com/software/products/reports/files/printerdrivertest.zip
    This should help you determine if it is a printer problem or whether you should look into another area.
    Also, you don't mention which version of reports, what command line options your using, the computer
    configuration your using whether it is a network printer or local printer connected to the machine. Support
    will need this information to help determine where your problem lies.
    Regards,
    The Oracle Reports Team

  • Problem with printing oracle 9i report from my form

    i got some problem in printing my report in PDF format. i am printing the report from
    my form as mentioned below. the report is printing but its giving a message
    File does not begin with '%PDF-'
    my idea is to show the report and print the report simultaneously. if i remove the
    web.show_document part then i didn't get that error.
    what is reason for this and how can i rectify it?
    pl_id:=create_parameter_list('GinMastList');
                   add_parameter(pl_id,'P_GINO',text_parameter,Trim(:Block3.text_item7));
                   --add_parameter(pl_id,'P_ToDt',text_parameter,Trim(:Block3.text_item9));
                   --add_parameter(pl_id,'P_todt',text_parameter,Trim(:Block3.text_item10));
              repid := find_report_object('PREPGIN');
                   --Set_Report_Object_Property(repid,Report_FileName,VarSetFName||'reports\NewParamGin.rdf');           
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,PRINTER);
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,'\\NV\HPLaserJ');
              --SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'rserver90');
              --SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=yes');
              v_rep := RUN_REPORT_OBJECT(repid,pl_id);
              rep_status := REPORT_OBJECT_STATUS(v_rep);
              WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
              LOOP
              rep_status := report_object_status(v_rep);
              END LOOP;
         message(rep_status);
         message(rep_status);
              IF rep_status = 'FINISHED' THEN
              WEB.SHOW_DOCUMENT('http://sylnvb2:8888/reports/rwservlet/getjobid'||
              substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=rserver90','_blank');
              ELSE
              MEssage(Message_Code||' '||Message_Type||' '||Message_TExt);
                        MEssage(Message_Code||' '||Message_Type||' '||Message_TExt);
              END IF;
              -- the paramter list is to be destroyed only the end of the report execution or else it will generate
              -- empty report
                   if not id_null(pl_id) then
                        destroy_parameter_list(pl_id);
                   end if;

    hello,
    there are two ways to do this :
    1) submit two jobs, one that prints and one that creates the PDF
    2) use reports advanced distribution to print and create a PDF file on the server as part of the same job, and then use web.show_document to bring up the PDF in the browser.
    however, this brings up the question, why exactly you want to print and display at the same time. why not display it and let the user print form Acrobat Reader.
    thanks,
    ph.

  • Problem with printing-- logo comes upside down

    Hi ,
    We have some problem with printing.
    While testing the print output for billing we are experiencing some problems. Every thing  in the layout looks fine in the print preview but when i take a print out in my local printer , i see the client logo comes upside down and some lines  are missing .
    Can some body suggest me how to correct the same.
    Regards,
    Sekhar.

    Hi Michael,
    Thanks....
    We have checked the printer earlier also and seems to be fine.
    Aditional info:
    1) We are getting this problem while printing Billing from "VF01" transaction.
    2) In this also we have two invoice numbers given by functional guy out of which in for one we are getting the problem that "lines of the first box are not printing" and for second "logo is coming inverted & lines of the first box are not printing"
    Regards,
    Sekhar.

  • Resolution problem when printing JPanel with picture on bg

    Hellow!
    I have some problems with printing JPanel component. I have a picture drawn on the background of the JPanel and several buttons on it. The whole JPanel is about 1600x800px. When i print whole the component with the help of PDF virtual printer, component is printed larger than A4 list. It is strange for me because print resolution is 600 dpi, so whole component must be a rectangle with the size about 2.5x1.5 inches. When I scale the graphics before painting component to fit image to page (i mean ... {color:#ff0000}g2d.scale(sc,sc); panel.paintAll(g2d);{color} ...), the picture's quality becomes very bad.
    I understod it so: I draw the component on the paper in screen resolution, then I decrease image size, so quality also decreases.
    My question is: how to draw on the graphics of printing paper the component in printers resolution (600dpi), but not in screen resolution.

    Hi there,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Have an HP Officejet Pro 8500 Wireless. Trying to print to it from my iPad2. Having some problems.

    I Have an HP Officejet Pro 8500 Wireless. Trying to print to it from my iPad2. Having some problems. Trying to print docs or files from the iPad usuall gets me a page that looks scrunched up to one side. Is there a good printer app (preferably free or shareware) that I could get or is there a patch, new driver, new firmware or something for the 8500 that would allow good printing fro the iPad wirelessly?

    The latest firmware version for your printer is DLM1FN1006BR; you can verify yours by printing out a self test page via the front panel of your printer. 
    Also, the HP ePrint Home & Biz app supports printing over your local wireless network, so please verify if your printer is connected to the same access point as your iPad2.  You are also able to verify connectivity by typing your printer's ip address within the address bar of your safari web browser.
    Say "Thanks" by clicking the blue Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"; therefore, it's easier for others to find.
    I am an HP employee.

  • Pavillion G6. Shrunk C Drive, and formatted the other as I drive. Had some problems with my printe

    I shrank C drive. that left me with another drive, which I formatted as drive I.  The recovery drive is D, as it was when I received the computer.   I had some problems with my printer (Epson) through a Dlink DIR655B1, and wanted to return the computer to factory condition.
    When I try to use the recovery through Windows, it says factory reset is disabled??  When I try to shut down, reboot, and use the bios restore, it just comes up with an error message, says to use the dvd that came with the computer, which it didn't?
    Any way I can put this all back to normal?
    Thanks
    Joe

    517joe wrote:
    I shrank C drive. that left me with another drive, which I formatted as drive I.  The recovery drive is D, as it was when I received the computer.   I had some problems with my printer (Epson) through a Dlink DIR655B1, and wanted to return the computer to factory condition.
    When I try to use the recovery through Windows, it says factory reset is disabled??  When I try to shut down, reboot, and use the bios restore, it just comes up with an error message, says to use the dvd that came with the computer, which it didn't?
    Any way I can put this all back to normal?
    Thanks
    Joe
    You damaged the partition structure when you shrank C, see this guide to properly add a 5th partition after you get it restored using HP recovery media.
    http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/How-to-repartition-HDD-of-HP-notebook-with-...

  • I wonder about the colors in the program. When i work and later gonna print the text i have some problem. The color is not the same when im print it. One color on the screen and another when i print it why?

    I wonder about the colors in the program. When i work and later gonna print the text i have some problem. The color is not the same when im print it. One color on the screen and another when i print it why?

    I wonder about the colors in the program. When i work and later gonna print the text i have some problem. The color is not the same when im print it. One color on the screen and another when i print it why?

  • Have some problems with my hp photosmart printer

    I have an hp photosmart c3100 all-in-one printer and having some problem, after replacing the black ink.  Anytime I turn tthe printer one it prints the test page.  I've checked all the settings and everything seems to be ok.   I tried to follow some troubleshooting tips I found online by scanning the testpage but it did not work.  Does anyone have any solution, my ink is running out because of this this problem

    Thats the page that keeps printing :-)
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • Some problems with 3D with xorg 1.9.2-1 and xf86-video-intel 2.12.0-3

    I have some problems with the upgrade to xorg 1.9.1-1 and xf86-video-intel 2.12.0-3. Glxgears does not run smoothly at all and I got 15-20 fps (instead of the normal 60 because intel should sync with the V refresh rate). Very curiously, these problems disapear if I move the mouse cursor somewhere in the screen. Then glxgears run smooth and I have indeed the expected 60 fps
    There are no error messages and glxinfo say that 3D is indeed enabled.
    Xorg log file:
    [ 358.899] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
    [ 358.899] _XSERVTransOpen: transport open failed for inet6/myhost:0
    [ 358.899] _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
    [ 358.900]
    X.Org X Server 1.9.2
    Release Date: 2010-10-30
    [ 358.900] X Protocol Version 11, Revision 0
    [ 358.900] Build Operating System: Linux 2.6.35-ARCH i686
    [ 358.900] Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Sat Oct 30 19:57:05 UTC 2010 i686
    [ 358.900] Kernel command line: root=/dev/disk/by-uuid/e5c72fc3-4e8b-4f5d-9023-12216af63d84 resume=/dev/disk/by-uuid/96f14b75-fb64-4881-863d-124af7c13e2f ro
    [ 358.900] Build Date: 01 November 2010 10:23:07PM
    [ 358.900]
    [ 358.900] Current version of pixman: 0.18.4
    [ 358.900] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 358.900] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 358.900] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 9 10:14:10 2010
    [ 358.900] (==) Using config file: "/etc/X11/xorg.conf"
    [ 358.901] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 358.901] (==) ServerLayout "X.org Configured"
    [ 358.901] (**) |-->Screen "Screen0" (0)
    [ 358.901] (**) | |-->Monitor "Monitor0"
    [ 358.901] (**) | |-->Device "Card0"
    [ 358.901] (**) |-->Input Device "Mouse0"
    [ 358.901] (**) |-->Input Device "touchpad"
    [ 358.901] (**) |-->Input Device "Keyboard0"
    [ 358.901] (**) Option "DontZap" "off"
    [ 358.901] (**) Option "StandbyTime" "5"
    [ 358.901] (**) Option "SuspendTime" "5"
    [ 358.901] (**) Option "OffTime" "5"
    [ 358.901] (**) Option "Xinerama" "on"
    [ 358.901] (**) Option "AutoAddDevices" "off"
    [ 358.901] (**) Not automatically adding devices
    [ 358.901] (==) Automatically enabling devices
    [ 358.902] (**) Xinerama: enabled
    [ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 358.902] Entry deleted from font path.
    [ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 358.902] Entry deleted from font path.
    [ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 358.902] Entry deleted from font path.
    [ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 358.902] Entry deleted from font path.
    [ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 358.902] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/75dpi/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/75dpi/
    [ 358.902] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 358.902] (II) Loader magic: 0x81f1f80
    [ 358.902] (II) Module ABI versions:
    [ 358.902] X.Org ANSI C Emulation: 0.4
    [ 358.902] X.Org Video Driver: 8.0
    [ 358.902] X.Org XInput driver : 11.0
    [ 358.902] X.Org Server Extension : 4.0
    [ 358.903] (--) PCI:*(0:0:2:0) 8086:27a2:1584:9916 rev 3, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0040000/262144, I/O @ 0x00001800/8
    [ 358.903] (--) PCI: (0:0:2:1) 8086:27a6:1584:9916 rev 3, Mem @ 0xb0100000/524288
    [ 358.904] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 358.904] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 358.904] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 358.904] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 358.904] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    [ 358.904] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    [ 358.904] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    [ 358.904] (II) LoadModule: "extmod"
    [ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 358.904] (II) Module extmod: vendor="X.Org Foundation"
    [ 358.904] compiled for 1.9.2, module version = 1.0.0
    [ 358.904] Module class: X.Org Server Extension
    [ 358.904] ABI class: X.Org Server Extension, version 4.0
    [ 358.904] (II) Loading extension MIT-SCREEN-SAVER
    [ 358.904] (II) Loading extension XFree86-VidModeExtension
    [ 358.904] (II) Loading extension XFree86-DGA
    [ 358.904] (II) Loading extension DPMS
    [ 358.904] (II) Loading extension XVideo
    [ 358.904] (II) Loading extension XVideo-MotionCompensation
    [ 358.904] (II) Loading extension X-Resource
    [ 358.904] (II) LoadModule: "glx"
    [ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 358.905] (II) Module glx: vendor="X.Org Foundation"
    [ 358.905] compiled for 1.9.2, module version = 1.0.0
    [ 358.905] ABI class: X.Org Server Extension, version 4.0
    [ 358.905] (==) AIGLX enabled
    [ 358.905] (II) Loading extension GLX
    [ 358.905] (II) LoadModule: "record"
    [ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 358.905] (II) Module record: vendor="X.Org Foundation"
    [ 358.905] compiled for 1.9.2, module version = 1.13.0
    [ 358.905] Module class: X.Org Server Extension
    [ 358.905] ABI class: X.Org Server Extension, version 4.0
    [ 358.905] (II) Loading extension RECORD
    [ 358.905] (II) LoadModule: "dri2"
    [ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 358.905] (II) Module dri2: vendor="X.Org Foundation"
    [ 358.905] compiled for 1.9.2, module version = 1.2.0
    [ 358.905] ABI class: X.Org Server Extension, version 4.0
    [ 358.905] (II) Loading extension DRI2
    [ 358.905] (II) LoadModule: "dbe"
    [ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 358.906] (II) Module dbe: vendor="X.Org Foundation"
    [ 358.906] compiled for 1.9.2, module version = 1.0.0
    [ 358.906] Module class: X.Org Server Extension
    [ 358.906] ABI class: X.Org Server Extension, version 4.0
    [ 358.906] (II) Loading extension DOUBLE-BUFFER
    [ 358.906] (II) LoadModule: "dri"
    [ 358.906] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 358.906] (II) Module dri: vendor="X.Org Foundation"
    [ 358.906] compiled for 1.9.2, module version = 1.0.0
    [ 358.906] ABI class: X.Org Server Extension, version 4.0
    [ 358.906] (II) Loading extension XFree86-DRI
    [ 358.906] (II) LoadModule: "synaptics"
    [ 358.906] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 358.906] (II) Module synaptics: vendor="X.Org Foundation"
    [ 358.906] compiled for 1.9.0, module version = 1.3.0
    [ 358.906] Module class: X.Org XInput Driver
    [ 358.906] ABI class: X.Org XInput driver, version 11.0
    [ 358.906] (II) LoadModule: "intel"
    [ 358.906] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 358.907] (II) Module intel: vendor="X.Org Foundation"
    [ 358.907] compiled for 1.9.0, module version = 2.12.0
    [ 358.907] Module class: X.Org Video Driver
    [ 358.907] ABI class: X.Org Video Driver, version 8.0
    [ 358.907] (II) LoadModule: "mouse"
    [ 358.907] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    [ 358.907] (II) Module mouse: vendor="X.Org Foundation"
    [ 358.907] compiled for 1.9.0, module version = 1.6.0
    [ 358.907] Module class: X.Org XInput Driver
    [ 358.907] ABI class: X.Org XInput driver, version 11.0
    [ 358.907] (II) LoadModule: "synaptics"
    [ 358.907] (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 358.907] (II) LoadModule: "kbd"
    [ 358.908] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
    [ 358.908] (II) Module kbd: vendor="X.Org Foundation"
    [ 358.908] compiled for 1.9.0, module version = 1.4.0
    [ 358.908] Module class: X.Org XInput Driver
    [ 358.908] ABI class: X.Org XInput driver, version 11.0
    [ 358.908] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
    [ 358.908] (--) using VT number 7
    [ 358.908] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
    [ 358.908] (WW) xf86OpenConsole: setsid failed: Operation not permitted
    [ 358.916] drmOpenDevice: node name is /dev/dri/card0
    [ 358.916] drmOpenDevice: open result is 10, (OK)
    [ 358.916] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 358.916] drmOpenDevice: node name is /dev/dri/card0
    [ 358.916] drmOpenDevice: open result is 10, (OK)
    [ 358.916] drmOpenByBusid: drmOpenMinor returns 10
    [ 358.916] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 358.916] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 358.916] (==) intel(0): RGB weight 888
    [ 358.916] (==) intel(0): Default visual is TrueColor
    [ 358.916] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
    [ 358.916] (--) intel(0): Chipset: "945GM"
    [ 358.916] (==) intel(0): video overlay key set to 0x101fe
    [ 358.953] (II) intel(0): Output VGA1 using monitor section vgamonitor
    [ 358.953] (**) intel(0): Option "Disable" "true"
    [ 359.059] (II) intel(0): Output LVDS1 using monitor section lvdsmonitor
    [ 359.059] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    [ 359.340] (II) intel(0): Output TV1 has no monitor section
    [ 359.380] (II) intel(0): EDID for output VGA1
    [ 359.486] (II) intel(0): EDID for output LVDS1
    [ 359.486] (II) intel(0): Manufacturer: CPT Model: 13a6 Serial#: 0
    [ 359.486] (II) intel(0): Year: 2006 Week: 17
    [ 359.486] (II) intel(0): EDID Version: 1.3
    [ 359.486] (II) intel(0): Digital Display Input
    [ 359.486] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
    [ 359.486] (II) intel(0): Gamma: 2.20
    [ 359.486] (II) intel(0): No DPMS capabilities specified
    [ 359.486] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 359.486] (II) intel(0): First detailed timing is preferred mode
    [ 359.486] (II) intel(0): redX: 0.600 redY: 0.340 greenX: 0.309 greenY: 0.559
    [ 359.486] (II) intel(0): blueX: 0.149 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
    [ 359.486] (II) intel(0): Manufacturer's mask: 0
    [ 359.486] (II) intel(0): Supported detailed timing:
    [ 359.486] (II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
    [ 359.486] (II) intel(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
    [ 359.486] (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
    [ 359.486] (II) intel(0): Unknown vendor-specific block f
    [ 359.486] (II) intel(0): FD1631154WB4
    [ 359.486] (II) intel(0): /BRZÄêÿ
    [ 359.486] (II) intel(0): EDID (in hex):
    [ 359.486] (II) intel(0): 00ffffffffffff000e14a61300000000
    [ 359.486] (II) intel(0): 11100103802115780a806d99574f8f26
    [ 359.486] (II) intel(0): 21505400000001010101010101010101
    [ 359.486] (II) intel(0): 010101010101ea1a0080502010301520
    [ 359.486] (II) intel(0): 13004bcf100000190000000f00000000
    [ 359.486] (II) intel(0): 0000000000206e050f00000000fe0046
    [ 359.486] (II) intel(0): 44313633313135345742340a000000fe
    [ 359.486] (II) intel(0): 002f42525a81c4eaff01010a2020004f
    [ 359.487] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 359.487] (II) intel(0): Printing probed modes for output LVDS1
    [ 359.487] (II) intel(0): Modeline "1280x800"x60.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
    [ 359.487] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 359.487] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 359.487] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 359.487] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 359.766] (II) intel(0): EDID for output TV1
    [ 359.766] (II) intel(0): Output VGA1 disabled by config file
    [ 359.766] (II) intel(0): Output LVDS1 connected
    [ 359.766] (II) intel(0): Output TV1 disconnected
    [ 359.766] (II) intel(0): Using exact sizes for initial modes
    [ 359.766] (II) intel(0): Output LVDS1 using initial mode 1280x800
    [ 359.766] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 359.766] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
    [ 359.766] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
    [ 359.766] (==) intel(0): DPI set to (96, 96)
    [ 359.767] (II) Loading sub module "fb"
    [ 359.767] (II) LoadModule: "fb"
    [ 359.767] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 359.767] (II) Module fb: vendor="X.Org Foundation"
    [ 359.767] compiled for 1.9.2, module version = 1.0.0
    [ 359.767] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 359.767] (==) Depth 24 pixmap format is 32 bpp
    [ 359.767] (II) intel(0): [DRI2] Setup complete
    [ 359.767] (II) intel(0): [DRI2] DRI driver: i915
    [ 359.767] (**) intel(0): Tiling enabled
    [ 359.767] (**) intel(0): SwapBuffers wait enabled
    [ 359.767] (==) intel(0): VideoRam: 262144 KB
    [ 359.767] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
    [ 359.767] (II) UXA(0): Driver registered support for the following operations:
    [ 359.767] (II) solid
    [ 359.767] (II) copy
    [ 359.767] (II) composite (RENDER acceleration)
    [ 359.767] (II) put_image
    [ 359.767] (II) get_image
    [ 359.767] (==) intel(0): Backing store disabled
    [ 359.767] (==) intel(0): Silken mouse enabled
    [ 359.767] (II) intel(0): Initializing HW Cursor
    [ 359.803] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 359.804] (==) intel(0): DPMS enabled
    [ 359.805] (==) intel(0): Intel XvMC decoder disabled
    [ 359.805] (II) intel(0): Set up textured video
    [ 359.805] (II) intel(0): Set up overlay video
    [ 359.805] (II) intel(0): direct rendering: DRI2 Enabled
    [ 359.805] (--) RandR disabled
    [ 359.805] (II) Initializing built-in extension Generic Event Extension
    [ 359.805] (II) Initializing built-in extension SHAPE
    [ 359.805] (II) Initializing built-in extension MIT-SHM
    [ 359.805] (II) Initializing built-in extension XInputExtension
    [ 359.805] (II) Initializing built-in extension XTEST
    [ 359.805] (II) Initializing built-in extension BIG-REQUESTS
    [ 359.805] (II) Initializing built-in extension SYNC
    [ 359.805] (II) Initializing built-in extension XKEYBOARD
    [ 359.805] (II) Initializing built-in extension XC-MISC
    [ 359.805] (II) Initializing built-in extension SECURITY
    [ 359.805] (II) Initializing built-in extension XINERAMA
    [ 359.805] (II) Initializing built-in extension XFIXES
    [ 359.805] (II) Initializing built-in extension RENDER
    [ 359.805] (II) Initializing built-in extension RANDR
    [ 359.805] (II) Initializing built-in extension COMPOSITE
    [ 359.805] (II) Initializing built-in extension DAMAGE
    [ 359.821] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 359.821] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 359.821] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 359.821] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 359.821] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 359.821] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    [ 359.821] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 359.822] (II) intel(0): Setting screen physical size to 338 x 211
    [ 360.019] (**) Option "Protocol" "auto"
    [ 360.019] (**) Option "Device" "/dev/input/mice"
    [ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    [ 360.019] (**) Mouse0: Device: "/dev/input/mice"
    [ 360.019] (**) Mouse0: Protocol: "auto"
    [ 360.019] (**) Option "CorePointer"
    [ 360.019] (**) Mouse0: always reports core events
    [ 360.019] (**) Option "Device" "/dev/input/mice"
    [ 360.019] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    [ 360.019] (**) Option "ZAxisMapping" "4 5 6 7"
    [ 360.019] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    [ 360.019] (**) Mouse0: Buttons: 11
    [ 360.019] (**) Option "Sensitivity" "0.7"
    [ 360.019] (**) Mouse0: Sensitivity: 0.7
    [ 360.019] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    [ 360.019] (**) Mouse0: (accel) keeping acceleration scheme 1
    [ 360.019] (**) Mouse0: (accel) acceleration profile 0
    [ 360.019] (**) Mouse0: (accel) acceleration factor: 2.000
    [ 360.019] (**) Mouse0: (accel) acceleration threshold: 4
    [ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    [ 360.311] (II) Mouse0: ps2EnableDataReporting: succeeded
    [ 360.311] (II) Synaptics touchpad driver version 1.3.0
    [ 360.312] (--) touchpad auto-dev sets device to /dev/input/event6
    [ 360.312] (**) Option "Device" "/dev/input/event6"
    [ 360.312] (--) touchpad: x-axis range 1472 - 5472
    [ 360.312] (--) touchpad: y-axis range 1408 - 4448
    [ 360.312] (--) touchpad: pressure range 0 - 255
    [ 360.312] (--) touchpad: finger width range 0 - 0
    [ 360.312] (--) touchpad: buttons: left right double triple
    [ 360.312] (--) touchpad: invalid finger width range. defaulting to 0 - 16
    [ 360.312] (**) Option "TapButton1" "1"
    [ 360.312] (--) touchpad: touchpad found
    [ 360.312] (**) Option "SendCoreEvents"
    [ 360.312] (**) touchpad: always reports core events
    [ 360.312] (II) XINPUT: Adding extended input device "touchpad" (type: TOUCHPAD)
    [ 360.312] (**) touchpad: (accel) MinSpeed is now constant deceleration 2.5
    [ 360.312] (**) touchpad: MaxSpeed is now 1.75
    [ 360.312] (**) touchpad: AccelFactor is now 0.040
    [ 360.312] (**) touchpad: (accel) keeping acceleration scheme 1
    [ 360.312] (**) touchpad: (accel) acceleration profile 1
    [ 360.312] (**) touchpad: (accel) acceleration factor: 2.000
    [ 360.312] (**) touchpad: (accel) acceleration threshold: 4
    [ 360.312] (--) touchpad: touchpad found
    [ 360.312] (**) Option "CoreKeyboard"
    [ 360.312] (**) Keyboard0: always reports core events
    [ 360.312] (**) Option "Protocol" "standard"
    [ 360.312] (**) Keyboard0: Protocol: standard
    [ 360.312] (**) Option "XkbRules" "base"
    [ 360.312] (**) Keyboard0: XkbRules: "base"
    [ 360.312] (**) Option "XkbModel" "pc105"
    [ 360.312] (**) Keyboard0: XkbModel: "pc105"
    [ 360.312] (**) Option "XkbLayout" "fr"
    [ 360.313] (**) Keyboard0: XkbLayout: "fr"
    [ 360.313] (**) Option "XkbVariant" "oss"
    [ 360.313] (**) Keyboard0: XkbVariant: "oss"
    [ 360.313] (**) Option "XkbOptions" "terminate:ctrl_alt_bksp"
    [ 360.313] (**) Keyboard0: XkbOptions: "terminate:ctrl_alt_bksp"
    [ 360.313] (**) Option "CustomKeycodes" "off"
    [ 360.313] (**) Keyboard0: CustomKeycodes disabled
    [ 360.313] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    [ 360.372] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 360.372] (II) AutoAddDevices is off - not adding device.
    [ 360.373] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
    [ 360.373] (II) AutoAddDevices is off - not adding device.
    [ 360.376] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 360.376] (II) AutoAddDevices is off - not adding device.
    [ 360.376] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 360.376] (II) AutoAddDevices is off - not adding device.
    [ 360.376] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 360.376] (II) AutoAddDevices is off - not adding device.
    [ 360.377] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
    [ 360.377] (II) AutoAddDevices is off - not adding device.
    [ 360.379] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/event9)
    [ 360.379] (II) AutoAddDevices is off - not adding device.
    [ 360.380] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/mouse1)
    [ 360.380] (II) AutoAddDevices is off - not adding device.
    [ 360.382] (II) config/udev: Adding input device Western Digital External HDD (/dev/input/event8)
    [ 360.382] (II) AutoAddDevices is off - not adding device.
    [ 360.385] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 360.385] (II) AutoAddDevices is off - not adding device.
    [ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
    [ 360.385] (II) AutoAddDevices is off - not adding device.
    [ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 360.385] (II) AutoAddDevices is off - not adding device.
    [ 362.484] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 368.334] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 368.334] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 368.503] (II) intel(0): EDID vendor "CPT", prod id 5030
    [ 368.503] (II) intel(0): Printing DDC gathered Modelines:
    [ 368.503] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
    [ 369.076] (II) Mouse0: ps2EnableDataReporting: succeeded
    [ 369.076] (--) touchpad: touchpad found
    [ 441.972] (II) 3rd Button detected: disabling emulate3Button
    output of glxinfo
    name of display: :0.0
    display: :0 screen: 0
    direct rendering: Yes
    server glx vendor string: SGI
    server glx version string: 1.4
    server glx extensions:
    GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
    GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGIX_visual_select_group, GLX_INTEL_swap_event
    client glx vendor string: Mesa Project and SGI
    client glx version string: 1.4
    client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
    GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
    GLX_INTEL_swap_event
    GLX version: 1.4
    GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
    GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control,
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
    GLX_INTEL_swap_event
    OpenGL vendor string: Tungsten Graphics, Inc
    OpenGL renderer string: Mesa DRI Intel(R) 945GM GEM 20100328 2010Q1 x86/MMX/SSE2
    OpenGL version string: 1.4 Mesa 7.8.3
    OpenGL extensions:
    GL_ARB_copy_buffer, GL_ARB_depth_texture, GL_ARB_draw_buffers,
    GL_ARB_draw_elements_base_vertex, GL_ARB_fragment_program,
    GL_ARB_half_float_pixel, GL_ARB_map_buffer_range, GL_ARB_multisample,
    GL_ARB_multitexture, GL_ARB_pixel_buffer_object, GL_ARB_point_parameters,
    GL_ARB_point_sprite, GL_ARB_provoking_vertex, GL_ARB_shader_objects,
    GL_ARB_shading_language_100, GL_ARB_shading_language_120, GL_ARB_shadow,
    GL_ARB_sync, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
    GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
    GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
    GL_ARB_transpose_matrix, GL_ARB_vertex_array_object,
    GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
    GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
    GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
    GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
    GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array, GL_EXT_copy_texture,
    GL_EXT_draw_range_elements, GL_EXT_framebuffer_blit,
    GL_EXT_framebuffer_object, GL_EXT_fog_coord,
    GL_EXT_gpu_program_parameters, GL_EXT_multi_draw_arrays,
    GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels,
    GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
    GL_EXT_polygon_offset, GL_EXT_provoking_vertex, GL_EXT_rescale_normal,
    GL_EXT_secondary_color, GL_EXT_separate_specular_color,
    GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap,
    GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
    GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
    GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
    GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
    GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle,
    GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1,
    GL_APPLE_client_storage, GL_APPLE_packed_pixels,
    GL_APPLE_vertex_array_object, GL_APPLE_object_purgeable,
    GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3,
    GL_ATI_separate_stencil, GL_IBM_multimode_draw_arrays,
    GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
    GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
    GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
    GL_NV_packed_depth_stencil, GL_NV_texture_env_combine4,
    GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
    GL_NV_vertex_program1_1, GL_OES_read_format, GL_SGIS_generate_mipmap,
    GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
    GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
    32 GLX Visuals
    visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
    id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
    0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x8e 24 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x8f 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x90 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x91 24 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x92 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x93 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x94 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x95 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x96 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x97 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x98 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x99 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
    0x9a 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x9b 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
    0x9c 24 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x9d 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x9e 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x9f 24 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0xa0 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0xa1 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0xa2 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0xa3 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0xa4 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0xa5 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0xa6 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0xa7 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0xa8 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
    0xa9 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0xaa 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
    0x5d 32 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    48 GLXFBConfigs:
    visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
    id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
    0x5e 0 tc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
    0x5f 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
    0x60 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
    0x61 0 tc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x62 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x63 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x64 0 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x65 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x66 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x67 0 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x68 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x69 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x6a 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x6b 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x6c 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x6d 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x6e 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x6f 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x70 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x71 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
    0x72 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x73 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
    0x74 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x75 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
    0x76 0 dc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
    0x77 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
    0x78 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
    0x79 0 dc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x7a 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x7b 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x7c 0 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x7d 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x7e 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
    0x7f 0 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x80 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x81 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x82 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x83 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x84 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
    0x85 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x86 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x87 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x88 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
    0x89 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
    0x8a 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
    0x8b 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
    0x8c 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
    0x8d 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow

    Gusar wrote:
    *sigh*
    Do you have problems with anything that's *not* glxgears?
    I have indeed not seen other problems. Presently the only other software that I believe use openGL that I use is googleearth; which run fine. Could it be a problem with glxgears?

  • Date problem in printing

    Hi frnds ,
    I in my mail i am having problem to print the date .
    i dont know but some times it is displaying as
    2008//0/4 instead of 2008/04/13
    or sometimes for some other documents
    it is printing the currect date
    I am also having problem to print a char variable . It is getting truncated . like only rohit istead of rohit gupta .
    Plz Help

    Rohit,
    I guess you have chosen wrong forum.
    Well provide some info:
    1. how you are accessing the mail is it send mail activity or FM
    2. How data is getting populated into mail.
    If you are using send mail activity then check that how you are passing date to it, It might be possible that it is wrong binding happening between containers.
    In case of FM you gotta debug it.
    Cheers
    Jai

  • Problem with printing a PDF

    Hi All,
    I'm developing a web application written in J2EE that uses Java Reporting Component (JRC) to display crystal reports from some filters recovered from a jsp and passed to a report .rpt previously designed and invoked just at runtime.
    I have a problem with printing a PDF:
    I want, after entering the filters in a jsp, to print a report in PDF format (WORD) without opening it
    with Adobe Reader (Microsoft Word). The class of API JRC used for export is ReportExportControl.
    Can anyone help me?
    I wish a great day to You all.

    Hi Ted Ueda,
    sorry for the delay of my answer.
    I understand very well the problems related to security.
    With the following code that I used to produce a report (PDF) at runtime,
    is the PDF created on the server and then sent to the client, or is it directly created on the client as PDF
    from RTF previously realized?
    ReportExportControl exportControl = new ReportExportControl();
    String report = report path;
    ReportClientDocument reportClientDoc = new ReportClientDocument();
    reportClientDoc.open(report, OpenReportOptions._openAsReadOnly);
    Object reportSource = null;
    reportSource = reportClientDoc.getReportSource();
    //The method setConnectionProperties() stores all the connection parameters in the collection
    //ConnectioInfos
    ConnectionInfos connInfos = setConnectionProperties(request, reportClientDoc);
    exportControl.setEnableLogonPrompt(false);
    exportControl.setEnableParameterPrompt(false);
    exportControl.setReportSource(reportSource);
    exportControl.setDatabaseLogonInfos(connInfos);
    //Single method to pass parameters to Crystal Reports. Using classes ParameterFieldController and
    //ParameterFieldDiscreteValue
    setReportParametersValue(reportClientDoc, reportParameters, subReportParameters);
    ExportOptions exportOptions = new ExportOptions();
    //Set the export format (PDF)
    exportOptions.setExportFormatType(ReportExportFormat.PDF);
    PDFExportFormatOptions PDFExpOpts = new PDFExportFormatOptions();
    exportOptions.setFormatOptions(PDFExpOpts);
    exportControl.setExportOptions(exportOptions);
    exportControl.setExportAsAttachment(true);
    try {
          exportControl.getHtmlContent(request, response, getServletConfig().getServletContext());
    } catch (ReportSDKExceptionBase e) {
    throw new ApplicationException("error code", ": error message"); }               
    As, however, I predicted in my previous message about the direct printing on the client,
    I read about ActiveX, but I don't know how to use them.
    I read this information in the 'Crystal Reports for Eclipse Developer Guide' about "printMode" attribute:
    "In ActiveX print mode, an ActiveX control is downloaded to the client machine and the report is send directly to the printer...."
    The ActiveX alternative is a java applet that runs on the client and takes the pdf from the server and prints directly onto the clients through the commands that I used in the DOS command line:
    1)     AcroRd32.exe /p /h FILENAME
    where
    /p = print
    /h = hide window
    to print the report and
    2)     tkill AcroRd32
    to close Adobe Reader, because it doesn't end automatically after printing and the command  /h  is used just to minimize the process.
    I hope you can give me advice because I need to print directly on the client. Thank you

  • Problems with printing MS Office docs from web-mail in Safari

    Hello,
    I have some problems when I try to print MS Office documents which are the attachments in my web-mail in Safari. I open the attachment online without saving it on my computer. Safari shows a blank page in Print Preview and the printer prints a blank page too. We tried to repeat it with another printer and with another iMac. The result is the same. PDF files have no problem with previewing and printing. Does anybody know how to resolve this problem? Thank you!

    Hi, thank you for your comment. I tried this, but the list of plug-ins doesn't have Adobe PDF browser plugin  (or PDF browser plugin). The screenshot is attached....
    Do you have any other idea? ) Thanks!

  • Smart form problem when printing header in table

    Hi Friends,
    I am facing some problem in smartform. In my smartform there is a table - where I should print "Header" at each start of line items and also at page break. So, I checked both the check boxes in Header as "Start of table" and "Page break".
    Now the problem is in main window - it is printing Header and line items are coming. After finished Again the header is coming and line items are coming. In some cases - What is happenning is: If the first page ends at the header only - Header is getting printed in the first page and the page ends here. In the next page also "Header is appearing because i checked page break". So, it is appearing twice.
    Could someone please guide me on this issue.
    Regards,
    Hari

    Hi,
    At any case the two headers will not be displayed if you select the both "start of table" and "at page break.". Please check whether there is another widow in the form from where the header is displaying.
    Thanks ,
    Abhijit

  • Problems with Print Program of Production Order (CO03) !!

    Hi all,
      I have a question about Print program of Production Order. I created a new Order in CO01. Then, in CO03, I call Print Program ( menu <b>Functions >> Print</b>). At the first time, it printed a so-called original version. Later, when i printed it again, it informed me that just was a copy. Now, that's ok.
    I made some modification of Print Program by copying and changing the code (let's call it Z_PSFCOBJL) and SAPScript form. However, When I call Print function in CO03 for that Order, it didn't show any changes which I made. What's wrong? I checked in the code by debug mode, the variable that I transfered to the form was correct with its value.
    <b>I think that because SAP just make a print copy so that it will not reflect any changes that I made to the program, right? Is there any way to overcome this because I don't want to create new Orders just for testing every modification</b>?
    Thank you in advance.

    Hi MURUGESAN THANGATHURAI  ,
        Yes, I did assign the new program and new form for this before printing. But I wanna know if there is any way that allows me to view those changes I made?
    When I change the code in Print Program, print-out includes this update (although it still informs me that is a copy version). But when I make changes in the SAPScript form (for example, adding a variable for display), <b>it will not update this</b>?
    What's problem?
    Thank you guys.

Maybe you are looking for

  • What's wrong with Musicstore?

    Has anyone else been experiencing crashes when they try to access certain categories on Musicstore? I'm using the latest iTunes and the problem started yesterday - I had downloaded some content the day before with no problems. I've tried malware scan

  • Changing the report in one client , it is getting reflected in other client

    Hello experts, We are having one development system(EID) in which we are having two clients.One is development client(100) and one is sandbox client(710).We are having repository object like report.We are changing this report in EID 710 and it is get

  • Requirement for add a journal entry of unbalnce FC  amount

    Hi,expert ! I want to add a journal entry of unbalnce FC  amount. for example: assume the exchage rate is 1.5 AccountNo  Debit(FC)          Credit(FC)  Debit Credit 1001                usd 100                           150 1002                       

  • Load balancing, failover and fallback in Non-Clustered WebLogic environment

    hi, Has anyone implemented WebLogic 10.3.3 (or 10.3.4) in a Non-Clustered environment, but also got load balancing, failover and fallback work? We were successful in getting failover working using t3://server1:7001,server2:7002 provider URL, but not

  • Crawl KM repository without TREX

    I want to build a plug in that will crawl the KM repository without using TREX. How do I connect to the KM repository from my external application .Can this plug in be installed on a different server.