Some projects view suddenly only available with multi. photos? in

Aperture 3 view cycles now (i.e. pressing V cycles through the three available views)  in some projects (not all) are available only with multiple photos, even when selecting split screen (bottom of screen has strip of  multiple shots, but there are also multiple above the split) and can't get full screen without multiple shots being present. This is occuring in just a few of my eight or so projects. I should mention my 2yr old grandson has been fooling around again! This is confusing to discribe. Sorry about that.

Yes, your post is confusing... but it sounds like multiple photos have been selected.  Try doubleclcking on one photo only - does it come up on the screen okay? (don't use fullscreen mode, just normal Aperture).  Now cycle using V - does that change anything?

Similar Messages

  • Live View Preview is only available with...

    When I select preview 'server' from the Browser Lab panel in Dreamweaver I get this message:
    "Live View Preview is only available with BrowserLab Local/Network preview option, please select the Local/Network preview option."

    Hi Mattdwm,
    Yes this behavior is 100% correct, and what you observed about it only working if you toggle Live View off is what the error message was trying to tell you.
    I'll try to explain - in Dreamweaver's Live View mode you can interact with your page "freeze" the javascript in intermediate states. The information about those states is only contained on the local machine. So if you were to perform a server preview from DW while in Live View, the page would only be in the base/default state in the screenshot captured by BrowserLab. So the only way BrowserLab can get the properly get the info about the intermediate state you've navigated to is if you choose the Local/Network preview option.
    I suppose we could have implemented things so that it would not show you that message if you haven't done any interactions with your page in Live View, but I think that would actually be more confusing, as it would sometimes work and sometimes not work. And even if we could automatically switch over to Local/Network mode for BrowserLab while you're in DW's Live View mode, we probably wouldn't because we want that to be a choice made explicitly by our users.
    Thanks for your interest in BrowserLab, I hope this helps,
    Mark

  • D20 now only available with Windows and SATA...??

    As of this morning, the Lenovo Thinkstation D20 on the US site is only available with Windows and SATA hard drives.  It used to have SAS drives and DOS available.
    They may just be low on inventory, or maybe... ?
    FWIW
    JohnV474
    Solved!
    Go to Solution.

    Kind of funny you mention this as a few of my team members and I were digging through the CTO site today.  Considering the crazy number of various parts/options that we have qualified for the S/C/D 20 platforms, there are a ton of omissions on the CTO site.  I know they pull some various options from time to time because of inventory or end of life concerns, but the configs that were showing up today as available really made no sense.  Unfortunately there's not a lot I can do from my side to get this resolved other than raise the complaint.  I'll see what I can do though.

  • I::001 Only available with the RFC library from 4.0C onwa

    Hello all!
    I'm using SAP .NET Connector for integration between .NET application and SAP System.
    When I try to work with standard document bapi methods like  BAPI_DOCUMENT_CHECKIN or BAPI_DOCUMENT_CHECKOUTVIEW, I get an error in out RETURN parameter - I::001 Only available with the RFC library from 4.0C onwa
    Please, help if you know how to solve this issue. Any help appreciated, and thanks in advance for the help.
    Best regards,
    Alex

    Hello,
    Is the function module remote enabled? Check the attributes of the function module, see
    [remote enabled function module|http://help.sap.com/saphelp_nw04/helpdata/EN/22/0425f2488911d189490000e829fbbd/frameset.htm]
    Next step to figure out this problem will be calling the function module remote and debugging it, see...
    [external breakpoints|http://help.sap.com/saphelp_nw70/helpdata/en/af/0cb5403fd63426e10000000a1550b0/frameset.htm]
    Regards,
    Marcel

  • TS2634 My iPod Touch only syncs with my photo albums.  All the music is no longer on the device.

    My iPod Touch only syncs with my photo albums.  All the music is no longer on the device.

    - Reboot the computer
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Why isn't iphone 5 available on the Irish site? And why is 4s only available with 8GB?

    I was searching for an iphone 5 on the Irish apple store and it doesn't seem to be for sale. I was also looking at the 4s and it only seems to be available with 8GB ,why is that also?

    Welcome to the Support Communities.
    rustic123 wrote:
    I was also looking at the 4s and it only seems to be available with 8GB ,why is that also?
    An iPhone 4s with only 8GB is cheaper for Apple to manufacture. "The idea is to put some distance between the iPhone 4S and Apple's new 'budget' iPhone, the iPhone 5C." ...From this article:
    Remember the iPhone 4S? Apple makes it an 8GB freebie

  • ¿iTunes match is only available with the music on iTunes Store of my country?

    I want to use iTunes Match but my question is.. if I have imported CD's (i'm from México), that they aren't available in the iTunes Store of my country, iTunes find the matches with other iTunes Stores (of the other countries) or it only work with the songs available on my iTunes Store (México)

    Hi
    I have achieved matches for tracks/albums that are not available in the UK store. If the track is on Apples server, there is a chance that you will get a match even though not available in local iTunes store.
    Jim

  • On some websites, some characters load as only boxes with four numbers/letters in them. What is this, and how do I get it to display the characters properly?

    Several pages will display characters as only boxes with four letters in them. I would like it to display all the characters.

    See my posts in this thread: [/questions/766381]
    Pages that use Unicode (UTF-8) display a little box with the hex code if the character can't be displayed. That allows you to look up the character in a table.
    This can be caused by missing font support for East Asian (CJK: Chinese, Japanese, Korean) or complex script (Indic) languages.

  • Inconsistent results using the "places" view on the iPad with geotagged photos

    I am getting inconsistent results with geotagged photos on the iPad (both 1 and 2) OS 5.01.  It seems that sometime photos will show up in the correct location on the places view others will not ( they will not show up at all).  In fact I can have a geotagged photo in one folder, synch with iTunes and it will not show up in the places view and then move that same picture to a different folder (which becomes an album on the iPad) re-synch and it will now show up at the correct location in the places view.  All photos show up in the album view.  Everything is the latest version iTunes, iPad etc.  I can also have many photos geotagged exactly to the same location (exact same coordinates) some will show up, others will not.
    I have used different methods to geotag my photos.  At first I was using Photoshop Elements 8 until they stopped supporting geotagging photos.  Now I am using a third party application GeoSetter (excellent free application).  The GPS data is clearly in the Exif data but the results are not consistent.
    Any ideas? 

    I believe I have solved this problem myself and thought others might benefit from what I found.  It turns out to be what I believe as a glitch in iTunes.  iTunes creates a cache of all the photos that you synch with your iPad, iPhone etc.  Apparently it does not update that cache when you change the photo.  At least not the Geotagging data.  The file modify date was changing but that wasn't enough to cause iTunes to update the cache of the photos.  I deleted the cache of all the photos and re-synched and presto now all my photos where showing up at the correct location in the iPad "places" view.
    I might add that I called Apple tech support and was routed to a higher tier support person and was very disappointed with his response.  He basically told me that the "place" view in the iPad and iPhone was designed to be only used with an Apple computer and Apple software and was surprised the places view was working at all with pictures synched with a Windows based machine.  He also said he was unable to help me since he couldn't provide support for non-Apple products.  Although I understand this to a point I think he was too quick to make this decision.  The solution after all was a simple one and one I think he should have known.  I would think this cache problem would happen whether I was using Apple products as well.  I view this as a bug in iTunes.  Apple needs to compare the modified date of the file and update the cache if it has changed.

  • Pages Suddenly Coming Up With No Photos!

    I'm hoping someone can help me out here. I had a website that I'd created with iWeb and it was running fine. Then a friend told me it wasn't working and I discovered that the page displays with no photos, etc. I can't see what the problem is as I didn't change anything.
    Its located at http://www.timbarwick.com/DR2007/DR2007.html
    Any ideas or suggestions?
    Thanks!
    -=Tim=-

    Its a Firefox 3.0b3 bug!!!
    Thanks so much!
    -=Tim=-

  • Why is Noise Reduction only available with some raw files

    I  have been going through my CRW, CR, and CR2 raw files and have noticed that some, when opened in ACR, do not allow me to adjust all the parameters in Noise Reduction.  I thought it might be ISO related, but with a group of identically created raw files, some have full Noise Reduction adjustments while the next file will not.  The only group that offers full adjustment with all files are the newer CR2 files captured with a 5D Mark II.  Older 5D and 10D raw files are a hit and miss.
    Am I missing something?
    Thanks,
    Kim

    Another way is to just go into the Camera Calibration tab and select the 2010 process.
    -Noel

  • Is the GPS chip only available with the cellular LTE iPads??

    I was wondering if the wifi only ipad 3 also included the GPS chip or not?

    If you need built-in GPS capability then yes - though there are some stand-alone GPS units that apparently work with it e.g. Bad Elf (I haven't got it so I don't know how good it is).

  • RFC Problem:"I::001 Only available with the RFC library from 4.0C onwards."

    Hello,
    Ihave a VBA code that calls a BAPI via RFC to checkout a document. The Problem is that I get an error like in the subject. Here is my Code
    Private Declare Sub RfcAllowStartProgram Lib "librfc32.dll" (value As Any)
    Sub checkout_file()
    Dim oDocument As Object
    Dim oDocumentFile As Object
    Dim oDocumentFiles As Object
    Dim oReturn As Object
    Dim oBAPICtrl As Object
    'Creating BAPI object
    Set oBAPICtrl = CreateObject("SAP.BAPI.1")
    Set oConnection = oBAPICtrl.Connection
    If oConnection.Logon(0, False) = False Then
    MsgBox "No access to R/3 System"
    Exit Sub 'Programm beenden
    End If
    RfcAllowStartProgram ByVal 0&
    'Creating lokal instance of BO "Draw"
    Set oDocument = oBAPICtrl.GetSAPObject("DRAW", "PM2", "A5N00030059989", "D", "000")
    If Err.Number <> 0 Then
    MsgBox "No local BO 'Draw' created!"
    Exit Sub
    End If
    Set oDocumentFile = oBAPICtrl.DimAs(oDocument, "CheckOutView2", "DocumentFile")
    oDocumentFile("WSAPPLICATION") = "DOC"
    oDocument.CheckOutView2 OriginalPath:="D:\test\", _
    DocumentFile:=oDocumentFile, _
    DOCUMENTFILES:=oDocumentFiles, _
    DocumentStructure:=oDocumentStructure, Return:=oReturn
    MsgBox oDocumentFiles.RowCount
    MsgBox oReturn("MESSAGE")
    Set oConnection = Nothing
    Set oBAPICtrl = Nothing
    End Sub
    I have the newest librfc32.dll in my System32 folder (Version 7110.0.46.6208). Where is the problem? Can it be a problem on the application server or something?
    Thank you,
    Thomander

    Hi Thomander,
    Note 885058 indicates that the problem is resolved with the latest    
    RFC and ICU files. The RFC library is contained in the RFCSDK, please 
    ensure that you are using the latest SDK, it can be downloaded from the
    following location:                                                                               
    Support Packages and Patches                                          
        ==> Additional Components                                         
              ==> SAP NW RFC SDK                                          
                   ==> SAP NW RFC SDK 7.10                                
                        ==>Your OS                                                                               
    ICU libraries can be downloaded from service market place as part of  
    sap kernel. There are contained in the complete package sapexe.car    
    & in a seperate package UCLIB.sar                                     
    -> service.sap.com/patches                                           
    -> Entry by application group                                         
    -> additional component                                              
    -> SAP Kernel [ select the correct versions] & download the file                                                                               
    The naming convention of the library files varies depending on the    
    operating system, they may be called                                  
    "libicuuc.so.26", "libicuuc.sl.26", "libicuuc26.so" or "icuuc26.dll", 
    for example. You must therefore adjust the unpacking statements       
    accordingly.                                                                               
    Unpack the library to the temporary directory & then move it to the   
    kernel directory ("/usr/sap/<SID>/SYS/exe/run").                                                                               
    Caution: Make sure that the libicu* libraries do not overwrite any    
    existing files.                                                                               
    Once you are using the latest RFC and ICU files you should be ok.
    Maybe the information in the following link could also be useful for this kind of error:
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/plm/i001Win32error+2
    Best regards,
    Christoph

  • After updating my iphone 4 to IOS 5 should I be able to access the camera from the lock screen, or is tis only available with iPhone 4g?

    after updating my iphone 4 to iOS5, shouldn't I be able to access the camera from the lock-screen, or is this just an iPhone 4s feature?

    jmph wrote:
    Double pressing the Home button displays the Camera button.  However after the phone goes to sleep and is awakened the Camera button isn't there.  A double press brings it back.  Is there a way to make it stay there?
    No, you will have to double press each time on the lock screen to bring back the camera button.

  • Why does CUBE EFFECT only work with 1 photo?

    If I want the cube effect with a slideshow I only get the effect 1 time? I've tried all different ways - no go... anyone know the answer to this? I want a group of photos to rotate everytime they change.

    Sal - I know how it's supposed to work Dude but it doesn't! It works on the first one and the rest just change but NO CUBE. I've been using Macs for years - I know a lot but this one is puzzling? Have you tried it? Does it work for you? I may need to find the preferences file and trash it 'eh? where's it at?

Maybe you are looking for