Some Purchase Requistions are not being replanned during SNP Heuristics
Hi All,
Has anyone experienced any issue with purchase requisitions not being replanned during the SNP heuristics run (background or interactive). I have a product location combination and about half of the PRs are not being replanned and these are not fixed/firmed. When I say replannned I mean that they are not generating a new Purchase req. #. I have no idea why at this point. Any suggestions would be appreciated.
Regards,
Rumi
Rumi,
we faced a ismilar issue and figured out that the issue was due to the change in MoT for the Preq. The earlier Preqs were created with MoT 'Ship' which was then changed to 'Plane'. When we ran the heuristic the Preqs created with Ship were not recreated. This is a standard SAP APO behaviour.
I am sure that after deleting these preqs all subsequent runs would be working fine for you.
Nxet time if it happens consider what I have said, it could be a possible reason.
Abhi
Similar Messages
-
Since upgrading to iOS7 some text messages are not being sent on my iPhone 5, iMessage on my Ipads and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things. Any suggestions to fix these faults?
Make sure People Sending you via iMessage are sending their messages on your PHONE number not on your EMAIL addresses . My sister had the same problem, thats how i managed to solve it!
-
"SUS Purchase Orders" are not being extracted from SRM to BW
I'm usign BW 7.0 with SRM 5.0 (EBP and SUS).
"SUS Purchase Orders" (BUS2230) are not being extracted from SRM to BW, only "Purchase Orders" (BUS2201). I'm using standard SRM extractor 0BBP_TD_PO.
Does anyone have experieced this? Is there any special configuration to extract "SUS Purchase Orders"?
Thanks in advance
Raphael BarbozaThe only solution we were able to provide with the time constraint we had was to modify the standard extractor to consider the SUS PO code instead of the PO code.
Function module: BBP_BI_PO_EXTRACT
Replace line:
c_object_type TYPE bbp_object_type VALUE c_po, u201CBUS2201
With the line:
c_object_type TYPE bbp_object_type VALUE c_suspo, u201CBUS2230
It is not the most elegant solution, but it worked.
Hope it helps. -
Family sharing: Purchase requests are not being sent to Organizer
My son's requests for purchases are not notifying me, the organizer, and he cannot download/purchase any apps. It says the request was sent but there is no pop-up message for me to review the purchase request. I've checked, my iTunes account, my email on all my devices but I never receive any of his requests to purchase. Please help.
How are you uploading the file via network?
If you are troubleshooting the network bandwidth? or the threads where one process takes precedent over the other you will have to troubleshoot the QoS of the network you see this on.
To give a better visual please use Firebug or the Web Developer tool called Network to analyze the requests. The "XMLHttpRequest" will give better clues for Ajax. Reference [http://ajaxian.com/archives/ajax-debugging-with-firebug]
There may be a about:config option that allows mutithreading or max persistent connections per server you can check. -
Some key figures are not being correctly reversed in the Change Log
Hi Experts,
I'm working with the BI 7 (SP 15) and I have created an ODS with Overwrite option (Record Mode equal to ' ') and a Cube receiving data from this ODS.
Whenever I have a change in one existing record in R/3 side (already previously loaded to BW), it comes perfectly to the ODS and overwrite the record in the Active Data. However, in the change log table, the before image record is not reversing all the key figures, there is one (Quant type) which is not working and it is being doubled in the cube. All the other key figures are Amount type and are working fine. PLease see below some examples of the Change Log behavior:
First time the record comes - Change log content:
Material Valid Dt Cost Value Quantity Rec. Mode Req. ID
1234 May/01 $ 100.00 10 'N' 1
Second time when the record changes the Date:
Material Date Cost Value Quantity Rec. Mode Req. 1234 May/29 $ 100.00 10 ' ' 2
1234 May/01 $ -100.00 10 'X' 2
Then the final result in the cube, after it is compressed, is:
Material Date Cost Value Quantity
1234 May/29 $ 100.00 20
Also, I have a Counter in the transformation to the Cube which is a constant equal to 1, it is also being aggregated erroneously. I could create a routine to check the record mode coming, but I'm not sure it is the best solution.
Can anybody help me to figure this out, please?
Thanks in advance.Hi Rajkumar,
Actually it is a generic extractor (customized) and the ODS active data is getting the delta records correctly. After I extract from R/3 and activate the ODS, the active table has correct results, but the change log table has the problem described before. All the fields comes from one single extractor.
The 0RECORDMODE that I mentioned is about the setting in the transformation to the ODS. You have the Technical rule group where you can set the 0RECORDMODE, in my case it is set to ' ' (blank) which means it will receive After-Images from the extractor (which I think is correct in my case). The most curious is that it is working for almost all key figures (all amount type), except for the Price Unit which is Quantity type.
Any other ideas?
Thanks. -
Originally the songs were only partially downloaded. After completing the downloads to itunes it was suggested to de authorize the computer and then authorize the computer. Still unable to transfer to classic ipod. Even tried resetting ipod.
Any suggestions?yeah, a little box comes up that says "the file ------ is not supported by the ipod" or some blah like that, and then theres this little button with a plus sign that you can click on and right next to it says 'see 181 total problems" and then it gives you a list of the things that didnt transfer. other than that, everything is fine.(well except for the fact that my music isnt transferring, of course.) its kinda new-ish, i got it in july, and its worked fine until now.
?? Windows XP -
Some contact names are not being updated
Some of my friends show as live:abc123 or facebook:abc123 and don't update in my contacts list even when the friends change it later in their profile. I have this issue both on Windows and Windows Phone. Please fix this.
I am seeing similar results.
Amanda, did you find resolution?
Herschel -
Some CD's with music burned to it, are not being recognized as having music files on them.
The format says Mac OS Extended. All of the settings were set during the disk image restore process. Even if I format the flash drive as extended journaled or some other format, all of these settings are reverted when I do the restore from the disk image. I will just copy all of the information that disk utility has so that you can see it.
Mount Point : /Volumes/Mac OS X Install ESD Capacity : 16.11 GB (16,106,110,976 Bytes) Format : Mac OS Extended Available : 12.3 GB (12,303,499,264 Bytes) Owners Enabled : Yes Used : 3.8 GB (3,802,611,712 Bytes) Number of Folders : 128 Number of Files : 876 -
I have some expensive plug-ins which are not being recognised by the new Logic. Where should I install them ?
I am using Mavericks OS, and I am considering transfering my choiceof DAW to Protools.
YoursdisillusionedbyLogicHi
LPX only supports 64bit Audio Unit plugins. You probably need to get the latest updates for all of your plugs.
Some plugs are not currently available as 64bit versions: you may want to try
http://www.soundradix.com/products/32-lives
CCT -
Some Of The Following Drivers Are Not Being Inslled On The Notebook
As the topic says, i have an Envy 6 1002TX laptop and in this laptop some of the drivers are not being installed while they are available in the download lists of drivers for the same laptop.
Product Number::B4P24PA#ACJ
OS::Windows 7 Ultimate x64
Here are thelist of Drivers that aren't working:-
1.Intel Smart Connect.
2.Intel turbo Boost.
and the Chipset drivers installation has readme file and installation instructions missing, see this:-Hi
Please find the link given below might help you to fix your issue. Download both driver chipset and have it checked.
Intel Turbo Boost Technology Driver
Driver Chipset
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
Why some archivelogs are not being backedup
Hi,
Can you help me understand why archivelog sequence 3 to 112 are not being backed-up?
Rman list backup
BS Key Type LV Size Device Type Elapsed Time Completion Time
13 Incr 0 1.49G SBT_TAPE 00:03:43 09-MAY-10
BP Key: 13 Status: AVAILABLE Compressed: NO Tag: TAG20100509T081017
Handle: tapefullarch<orcl_14:718531818:1>.dbf Media: 8d080a0a:4bbe63e5:0f3c:0001[[AE3772] Default LTO-Ultrium_4]
List of Datafiles in backup set 13
File LV Type Ckp SCN Ckp Time Name
1 0 Incr 71884411 09-MAY-10 +DATA/orcl/datafile/system.256.705520977
2 0 Incr 71884411 09-MAY-10 +DATA/orcl/datafile/sysaux.257.705520977
3 0 Incr 71884411 09-MAY-10 +DATA/orcl/datafile/undotbs1.258.705520977
4 0 Incr 71884411 09-MAY-10 +DATA/orcl/datafile/users.259.705520977
5 0 Incr 71884411 09-MAY-10 +DATA/orcl/datafile/example.269.705521085
BS Key Type LV Size Device Type Elapsed Time Completion Time
14 Incr 0 9.75M SBT_TAPE 00:00:06 09-MAY-10
BP Key: 14 Status: AVAILABLE Compressed: NO Tag: TAG20100509T081017
Handle: tapefullarch<orcl_15:718532043:1>.dbf Media: 8d080a0a:4bbe63e5:0f3c:0001[[AE3772] Default LTO-Ultrium_4]
SPFILE Included: Modification time: 09-MAY-10
SPFILE db_unique_name: ORCL
Control File Included: Ckp SCN: 71884491 Ckp time: 09-MAY-10
BS Key Size Device Type Elapsed Time Completion Time
15 548.75M SBT_TAPE 00:00:56 09-MAY-10
BP Key: 15 Status: AVAILABLE Compressed: NO Tag: TAG20100509T081413
Handle: tapefullarch<orcl_16:718532053:1>.dbf Media: 8d080a0a:4bbe63e5:0f3c:0001[[AE3772] Default LTO-Ultrium_4]
List of Archived Logs in backup set 15
Thrd Seq Low SCN Low Time Next SCN Next Time
1 112 71466716 04-JAN-10 71467421 04-JAN-10
1 113 71467421 04-JAN-10 71467880 04-JAN-10
1 114 71467880 04-JAN-10 71468651 04-JAN-10
1 115 71468651 04-JAN-10 71484482 29-APR-10
1 116 71484482 29-APR-10 71487769 29-APR-10
1 117 71487769 29-APR-10 71491078 29-APR-10
1 118 71491078 29-APR-10 71494090 29-APR-10
1 119 71494090 29-APR-10 71497327 29-APR-10
1 120 71497327 29-APR-10 71501375 29-APR-10
1 121 71501375 29-APR-10 71504570 29-APR-10
1 122 71504570 29-APR-10 71526345 29-APR-10
1 123 71526345 29-APR-10 71573288 01-MAY-10
1 124 71573288 01-MAY-10 71621137 02-MAY-10
1 125 71621137 02-MAY-10 71642763 02-MAY-10
1 126 71642763 02-MAY-10 71704967 03-MAY-10
1 127 71704967 03-MAY-10 71758899 04-MAY-10
1 128 71758899 04-MAY-10 71780946 04-MAY-10
1 129 71780946 04-MAY-10 71818236 05-MAY-10
1 130 71818236 05-MAY-10 71818244 05-MAY-10
1 131 71818244 05-MAY-10 71818290 05-MAY-10
1 132 71818290 05-MAY-10 71818293 05-MAY-10
1 133 71818293 05-MAY-10 71818296 05-MAY-10
1 134 71818296 05-MAY-10 71818317 05-MAY-10
1 135 71818317 05-MAY-10 71818321 05-MAY-10
1 136 71818321 05-MAY-10 71818325 05-MAY-10
1 137 71818325 05-MAY-10 71818372 05-MAY-10
1 138 71818372 05-MAY-10 71818560 05-MAY-10
1 139 71818560 05-MAY-10 71818568 05-MAY-10
1 140 71818568 05-MAY-10 71822429 05-MAY-10
1 141 71822429 05-MAY-10 71822437 05-MAY-10
1 142 71822437 05-MAY-10 71884015 09-MAY-10
1 143 71884015 09-MAY-10 71884510 09-MAY-10
1 144 71884510 09-MAY-10 71884518 09-MAY-10
BS Key Type LV Size Device Type Elapsed Time Completion Time
16 Full 9.75M SBT_TAPE 00:00:04 09-MAY-10
BP Key: 16 Status: AVAILABLE Compressed: NO Tag: TAG20100509T081520
Handle: tapefullarch<orcl_17:718532120:1>.dbf Media: 8d080a0a:4bbe63e5:0f3c:0001[[AE3772] Default LTO-Ultrium_4]
Control File Included: Ckp SCN: 71884559 Ckp time: 09-MAY-10
RMAN> ArchiveLogs...
SQL> select SEQUENCE#,DELETED from v$archived_log;
SEQUENCE# DEL
3 NO
4 NO
5 NO
6 NO
7 NO
8 NO
9 NO
10 NO
11 NO
12 NO
13 NO
SEQUENCE# DEL
14 NO
15 NO
16 NO
17 NO
18 NO
19 NO
20 NO
21 NO
22 NO
23 NO
24 NO
SEQUENCE# DEL
25 NO
26 NO
27 NO
28 NO
29 NO
30 NO
31 NO
32 NO
33 NO
34 NO
35 NO
SEQUENCE# DEL
36 NO
37 NO
38 NO
39 NO
40 NO
41 NO
42 NO
43 NO
44 NO
45 NO
46 NO
SEQUENCE# DEL
47 NO
48 NO
49 NO
50 NO
51 NO
52 NO
53 NO
54 NO
55 NO
56 NO
57 NO
SEQUENCE# DEL
58 NO
59 NO
60 NO
61 NO
62 NO
63 NO
64 NO
65 NO
66 NO
67 NO
68 NO
SEQUENCE# DEL
69 NO
70 NO
71 NO
72 NO
73 NO
74 NO
75 NO
76 NO
77 NO
78 NO
79 NO
SEQUENCE# DEL
80 NO
81 NO
82 NO
83 NO
84 NO
85 NO
86 NO
87 NO
88 NO
89 NO
90 NO
SEQUENCE# DEL
91 NO
92 NO
93 NO
94 NO
95 NO
96 NO
97 NO
98 NO
99 NO
100 NO
101 NO
SEQUENCE# DEL
102 NO
103 NO
104 NO
105 NO
106 NO
107 NO
108 NO
109 NO
110 NO
111 NO
112 NO
SEQUENCE# DEL
113 NO
114 NO
115 NO
116 NO
117 NO
118 NO
119 NO
120 NO
121 NO
122 NO
123 NO
SEQUENCE# DEL
124 NO
125 NO
126 NO
127 NO
128 NO
129 NO
130 NO
131 NO
132 NO
133 NO
134 NO
SEQUENCE# DEL
135 NO
136 NO
137 NO
138 NO
139 NO
140 NO
141 NO
142 NO
143 NO
144 NO
145 NO
SEQUENCE# DEL
146 NO
147 NO
148 NO
149 NO
147 rows selected.
SQL>Here it is Pavan... What's the difference between status X or A?
and when I crosscheck archivelog all, I see "validation failed for archived log" for archivelogs 3 to 111
SQL> select name, sequence#, completion_time, deleted from v$archived_log where status = 'A';
NAME
SEQUENCE# COMPLETIO DEL
+DATA/orcl/arch/orcl1_112_705521069.arch
112 04-JAN-10 NO
+DATA/orcl/arch/orcl1_113_705521069.arch
113 04-JAN-10 NO
+DATA/orcl/arch/orcl1_114_705521069.arch
114 04-JAN-10 NO
NAME
SEQUENCE# COMPLETIO DEL
+DATA/orcl/arch/orcl1_115_705521069.arch
115 29-APR-10 NO
+DATA/orcl/arch/orcl1_116_705521069.arch
116 29-APR-10 NO
+DATA/orcl/arch/orcl1_117_705521069.arch
117 29-APR-10 NO
NAME
SEQUENCE# COMPLETIO DEL
+DATA/orcl/arch/orcl1_118_705521069.arch
118 29-APR-10 NO
+DATA/orcl/arch/orcl1_119_705521069.arch
119 29-APR-10 NO
+DATA/orcl/arch/orcl1_120_705521069.arch
120 29-APR-10 NO
NAME
SEQUENCE# COMPLETIO DEL
+DATA/orcl/arch/orcl1_121_705521069.arch
121 29-APR-10 NO
+DATA/orcl/arch/orcl1_122_705521069.arch
122 29-APR-10 NO
+DATA/orcl/arch/orcl1_123_705521069.arch
123 01-MAY-10 NO
NAME
SEQUENCE# COMPLETIO DEL
+DATA/orcl/arch/orcl1_124_705521069.arch
124 02-MAY-10 NO
+DATA/orcl/arch/orcl1_125_705521069.arch
125 02-MAY-10 NO
+DATA/orcl/arch/orcl1_126_705521069.arch
126 03-MAY-10 NO
NAME
SEQUENCE# COMPLETIO DEL
+DATA/orcl/arch/orcl1_127_705521069.arch
127 04-MAY-10 NO
+DATA/orcl/arch/orcl1_128_705521069.arch
128 04-MAY-10 NO
+DATA/orcl/arch/orcl1_129_705521069.arch
129 05-MAY-10 NO
NAME
SEQUENCE# COMPLETIO DEL
+DATA/orcl/arch/orcl1_130_705521069.arch
130 05-MAY-10 NO
+DATA/orcl/arch/orcl1_131_705521069.arch
131 05-MAY-10 NO
+DATA/orcl/arch/orcl1_132_705521069.arch
132 05-MAY-10 NO
NAME
SEQUENCE# COMPLETIO DEL
+DATA/orcl/arch/orcl1_133_705521069.arch
133 05-MAY-10 NO
+DATA/orcl/arch/orcl1_134_705521069.arch
134 05-MAY-10 NO
+DATA/orcl/arch/orcl1_135_705521069.arch
135 05-MAY-10 NO
NAME
SEQUENCE# COMPLETIO DEL
+DATA/orcl/arch/orcl1_136_705521069.arch
136 05-MAY-10 NO
+DATA/orcl/arch/orcl1_137_705521069.arch
137 05-MAY-10 NO
+DATA/orcl/arch/orcl1_138_705521069.arch
138 05-MAY-10 NO
NAME
SEQUENCE# COMPLETIO DEL
+DATA/orcl/arch/orcl1_139_705521069.arch
139 05-MAY-10 NO
+DATA/orcl/arch/orcl1_140_705521069.arch
140 05-MAY-10 NO
+DATA/orcl/arch/orcl1_141_705521069.arch
141 05-MAY-10 NO
NAME
SEQUENCE# COMPLETIO DEL
+DATA/orcl/arch/orcl1_142_705521069.arch
142 09-MAY-10 NO
+DATA/orcl/arch/orcl1_143_705521069.arch
143 09-MAY-10 NO
+DATA/orcl/arch/orcl1_144_705521069.arch
144 09-MAY-10 NO
NAME
SEQUENCE# COMPLETIO DEL
+DATA/orcl/arch/orcl1_145_705521069.arch
145 09-MAY-10 NO
+DATA/orcl/arch/orcl1_146_705521069.arch
146 10-MAY-10 NO
+DATA/orcl/arch/orcl1_147_705521069.arch
147 10-MAY-10 NO
NAME
SEQUENCE# COMPLETIO DEL
+DATA/orcl/arch/orcl1_148_705521069.arch
148 11-MAY-10 NO
+DATA/orcl/arch/orcl1_149_705521069.arch
149 12-MAY-10 NO
+DATA/orcl/arch/orcl1_150_705521069.arch
150 12-MAY-10 NO
39 rows selected.
SQL> -
Some computers are not being assigned IP addresses WRT54G
We have Wireless-G (WRT54G)
Recently our cable modem went out and was replaced. All the computers that were connected at the time are accessing the internet just fine.
However, any new connections (or re-establishing connections after powering off) are not being assigned an IP address.
Attempted Wi-Fi connections find the router, successfully log in, but do not have a Wi-Fi connection. I trust this is also because no IP address is assigned.
Firmware 2.02.7
Help!
Message Edited by jbarrick on 06-20-2008 10:15 AM
Message Edited by jbarrick on 06-20-2008 11:22 AMReset the router for few seconds ....Access the setup page of the router by launching an
Browser and type on the address bar, 192.168.1.1 and press enter. When
it prompts for the username and password, leave the username field
empty and provide password as "admin" (Without quotes)
click on ok.
On the main setup page the ""Internet Connection Type"" should be
on ""Obtain IP Automatically - DHCP “. Click on the Save Settings
button.
Now click on the sub tab ""MAC address clone"".
- Click on enable
Click Clone & click save settings
Check WAN Ip on Status page of router ....
If getting Valid Ip .... try going online
If not ... power cycle for 4-5 minutes & then again check the WAN Ip address .....If getting valid Ip ...try going online ...
If not then upgrade & again follw the same steps .... -
Registrations for certain software are not being recognized by my Imac.
Registrations for software that require web based verifications are not being recognized by my iMac 27 2010 10.6.8
Included in the list of software that I have been using for some over a year now is FCE 4, Bias Peak, and Sibelius, and iRealb from the app store.
This is not a new issue although with the latest security update installed last week, the problem has been exacerbated.
I had the problem last year but found that if I shutdown (not just restarted) and then powered up again all my registrations would be recognized. Now my workaround no longer seems to work. I actually went for about 5 months with no problems and then occasionally I would have the shutdown/power up until last week.
I mirror the same software on my Macbook Pro 10.6.8 and have had no problems.
Thanks for any help.
MichaelI can add Kindle reader to the software list now. I used it last week and this week the cloud didn't recognize my computer.
Also on the iRealb app downloaded from the Apple app store I get a dialog that says the software was purchased on another computer (which it was, my laptop) and asks me to verify with my iTunes ID. I try to verify and it is unsuccessful, can not verify your computer.
MT -
Per-service SID's are not being granted correct permissions
Hi,
I had posted this here :
https://connect.microsoft.com/SQLServer/feedback/details/770984/per-service-sid-s-are-not-being-granted-correct-permissions, but no response as yet.
When installing SQL 2012 (on a VMWare VM), based on the following article :
http://msdn.microsoft.com/en-us/library/ms143504(v=sql.110), I have noticed that the SQL per service SIDs are not being granted the correct permissions. From the initial install, the following is what was observed (the red x's being permissions that
should have been granted but were not).
When re-installing and changing from specifying a domain account, to the default values, during set-up, the 4 service SIDs that were not added to 'Log on as a Service' initially were then correctly granted permission, but the other 4 in 'Bypass traverse
checking', 'Adjust Memory Quotas for a process' and 'Impersonate a Client after authentication' were still not added.
When running a repair on this install, 'NT Service\MSSQLFDLauncher' was then granted the correct permissions, but 'NT SERVICE\MsDtsServer110' was still missing 'Bypass traverse checking' and 'Impersonate a Client after authentication'.
This also resulted in the installation of Reporting Services - Native failing in the original installation with 'Attempted to perform an unauthorized operation'.
If anyone has recently installed SQL 2012, can you check (via gpedit.msc) that the correct 'User Right Assignment' was granted to the per Service SIDs as per
http://msdn.microsoft.com/en-us/library/ms143504(v=sql.110) ?Have you resolved this yet? Group policy for the OU with my desktop removes all SQL per-service rights. If group policy is your issue, I'd be interested in how some are retained.
Randy in Marin -
Reversal documents are not being represented when 0PY_PP_C3 is being loade
We use the 0HR_PY_PP_2 and 0HR_PY_PP_1 infosources to load the 0PY_PP_C2 and 0PY_PP_C1 ODSs. Then 0PY_PP_C1 updates the 0PY_PP_C3 ODS.
Routines in the update rules include corresponding data from 0PY_PP_C2 during the update of 0PY_PP_C3. If there is no matching data in 2, then the corresponding records in 1 do not go into 3 Our process chain first loads 2, after it activates, it then loads 1, then updates 3.
There are 5 reversal documents are in 0PY_PP_C2.
The Update rules between 0PY_PP_C1 and 0PY_PP_C3 refer to the Posting Documents ODS: 0PY_PP_C2.
The issue is that the reversal documents are not being represented when 0PY_PP_C3 is being loaded.Hi,
The simple solution is to debug the code written in the routine, as you mentioned that you already have some data in PP_C2 then check if that data is properly getting read in routine.
After that check the condition based on which you are skipping records of PP_C1 and not loading into PP_C3. Is your condition perfectly working fine?
Put a break point and check how the data is flowing.
Regards,
Durgesh.
Maybe you are looking for
-
Inside Windows I see a folder called PROGRAM FILES and another one called PROGRAM FILES (X86). Is either of these the correct one to put the Firefox installer program into before I launch the installer? There is also a folder called WINDOWS. Sorry fo
-
Source List (Error message 06 722)
Hi all, 1.the material being ordered has the source list requirement flagged in the material master in purchasing view. 2.source list has been maintained(with a same vendor in several contracts in different periods) 3.both above belonged to a same pl
-
TS2776 How to switch wifi on and the wifi address N/A?
How to switch wifi on and the wifi address N/A iPhone 4s?
-
Forms calling an outside package/ procedure
I am calling from a FORM an outside package.procedure. I execute the package.procedure in debug outside the FORM. It executes fine, but not from the FORM. HOw do I detemiine the cause of the problem from the FORM? Thanks.
-
Hello again.A friend has a 17" Power PC iMac G5.Pressing the power button would not start it.I tried unplugging and re-plugging,And pressing the button again,and nothing.Finally,after more pressing,it started up. After a minute or two,it shut down on