Some Question About Access point of the WRT54G
How many devices can the access point of the WRT 54G support?
I am looking at hooking up one Wii, 2 laptops and a Nintendo DS will this WRT 54G be able to handle that or will I need other devices.
Not sure how many wireless devices the WRT54G can handle. Most AP's depending on the amount of traffic is around 30 or so. Here is a link to the web site with the info for the WRT54G.
http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1149562300349&...
Richard Aichner (Ikester)
Similar Messages
-
Hello
In my work, we have two WAP4410N Wireless-N Access Point with Power Over Ethernet, but ¿how many users support each access point? And, somebody knows how I can configure the two access point to be viewed as one in all laptops? Normally, the laptops found access point 1 and acces point 2 but, somebody says me I can configure them as if they are one.
ThanksEliana,
The rule of thumb is a typical Ap can handle 20 users each, but the actual capacity could be more or less, alot of it depends on the traffic the users are generating and the bands/protocols.
for example if you are using 802.11g @ 54mbps, in reality your getting roughly 36 mbps of actual throughput, so then you have 20 users each using 100k of bandwidth which is about 2mb of traffic, you could handle more, but if you have 10 users that are pulling 1.5mbps then your cumlative traffic is 15mbps; so load is traffic dependant. Retries and other issues can affect this as well but are hard to calculate.
Also make sure the 2 access points you setup are on different channels.
Null or limited connectivity?? do you mean low signal strength or no network access?
Hope this helps.
Please rate useful posts -
Some questions about accessing Oracle from another machine with OEM
I followed this great tutorial on how to get oracle8i installed and working on rh6.2. http://jordan.fortwayne.com/oracle/
Great job to the writer)))
Know I need a little more info on where to go after it is up and running...
I downloaded the client for NT and I would like to access the Linux box using OEM from a Win2000 laptop however I really have no clue what I am doing and how to make this happen can someone please point me to a tutorial simular to the install tutorial I found?
Thanks
[email protected]You need to install OEM on your Windows box. From there go to your OEM configuration assistant in the start menu. Run it and point it to one of your instances on your DB server. You must provide a user name and password for the DB it will then connect and build a repository for OEM. After that run the OEM console application and connect to OEM using sysman for your login and oem_temp as your password. This should get you going.
-
Hello ,
I want to ask some question about ipads \
How powerful is the iPad?
How useful is it for reading books, newspaper or magazines or for surfing the web?
Can you identify any shortcomings of the device?
please help meit's less powerful than your average computer. THink of it like a netbook but with a better processor.
It'll do fine for surfing (although if you browse a lot of flash based sites you will need to get a third party browser since safari doesn't accommodate it)
You may do OK on reading books, papers or magazines, especially if they have apps, but the ipad's screen is backlit, so it doesn't work well outdoors and you may need to fiddle with the brightness so that you don't get eye strain (it's just like doing too much reading from a computer screen)
I would say the biggest short comings are data transfer. Apple's preferred work flow is that everything is done via iTunes or the internet....well people dont' always have 100% reliable always on internet access so you can find yourself in a situation where you can't get things on/off the iPad.
By and large, it's a good device for day to day stuff, but is not a computer replacement. -
Some questions about the integration between BIEE and EBS
Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps -
Some question about communicating the usb RAW device
I have some question about USB communication: I want to make my VI communicate
TI-DSP by USB, now, the driver of USB on DSP have done, and there are a test
program writen by VC and a driver fold(with a .inf and a .sys files), when I
install the driver and run the test program, the driver program on DSP run
regularly. And then I want to program a VI which have the same function as the
test program, so I unload the driver on PC firstly, then install the DSP in
NI_VISA according to "Using NI-VISA 3_0 to Control Your USB Device - Tutorial -
Instrument Drivers". When I sent the standard control request using the VISA test panel, the status below happened. I don't know what wrong with my step.
Dev Phase Data Info Time Cmd.Phase.Ofs
15 CTL 80 06 03 00 - 00 00 04 00 GET DESCRIPTR 5.2sc 56.1.0
14 CTL 80 06 03 00 - 00 00 04 00 GET DESCRIPTR 11us 57.1.0
14 USTS 00 00 01 c0 canceled 2.0sc 57.2.0
15 USTS 00 00 01 c0 canceled 5us 56.2.0
PS: the software I use to capture the data is BUSHOUND
1、Do I have to install the .sys driver file in VISA? How can I install the driver file without losing the device in MAX?
2、Someone told me it must be done by calling .dll fies in LV, but I want to know if LV can program the function directly without calling .dll file?
Thank for any reply~~!逍遥浪子 wrote:
I have some question about USB communication: I want to make my VI communicate TI-DSP by USB, now, the driver of USB on DSP have done, and there are a test program writen by VC and a driver fold(with a .inf and a .sys files), when I install the driver and run the test program, the driver program on DSP run regularly. And then I want to program a VI which have the same function as the test program, so I unload the driver on PC firstly, then install the DSP in NI_VISA according to "Using NI-VISA 3_0 to Control Your USB Device - Tutorial - Instrument
Drivers". When I sent the standard control request using the VISA test
panel, the status below happened. I don't know what wrong with my step. Dev
Phase
Data
Info
Time Cmd.Phase.Ofs ---
----- ------------------ 15
CTL 80 06 03 00 - 00 00 04 00 GET
DESCRIPTR 5.2sc
56.1.0 14
CTL 80 06 03 00 - 00 00 04 00 GET
DESCRIPTR 11us
57.1.0 14
USTS 00 00 01
c0
canceled
2.0sc
57.2.0 15
USTS 00 00 01
c0
canceled
5us 56.2.0 PS: the
software I use to capture the data is BUSHOUND 1、Do I have to install the .sys driver file in VISA? How can I install the driver file without losing the device in MAX? 2、
Someone told me it must be done by calling .dll fies in LV, but I want
to know if LV can program the function directly without calling .dll
file?
This thread
contains already a related answer and explains what a sys driver is.
While you could theoretically use the Call Library Node to call all the
necessary Win32 API kernel functions to connect to a device driver,
this would be very cumbersome and not doable without a real good
understanding about C programming. Writing an interface DLL instead
won't need more C programming knowledge at all but will give you a
clean interface to that device driver which eventually could be used in
other programming environments as well.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
Some question about Cisco Prime Infrastructure
Dear all
I have some question about using Cisco prime Infrastructure:
- Can I show how many user access to one Access Point (AP) ?
- If I can. What is display information of user ? etc Ip address, MAC, username access, name of device (notebook, tablet, phone ..)
- How many time do Cisco Prime Infrastructure refesh user informantion .?
Please help me and send picture about it if you can.
Thank you so much.Hi,
I don't have the Prime Infrastructure to post you image, but you can simply find all the answers you want on the config guide:
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/clientmgmt.html#wp1232242
1- You can surely find how many clients associated to a specific AP.
- Informaiton of the client usually includes username, SSID, ip address, mac address, RSSI, device vendor...etc. I don't think it contains the device type (ipad or iphone both appear as apple vendor. it does not destinguish between this and that.
3- The time of the refreshment is configurable. You need to configure the corresponding background task for the poll period. (this is also metnioned in the link above).
HTH
Amjad
Rating useful replies is more useful than saying "Thank you" -
Some questions about configuration in MAX.
Hello,everyone!
I have some questions about configuration in MAX(I am a jackaroo for motion control development),I hope I can get your help.
I use PCI-7344+UMI-7764+Servo amplifier+Servo motor,my MAX version is 4.2 and I use NI-Motion7.5
My question as following:
1,In Axis Configuration,for motor type,why I must select stepper but not servo?my motor is servo motor!If I select Servo,my motor can't run,I don't know why.
If I select stepper,though motor can work but I can't test encoder in MAX.
2,In Stepper settings,for stepper loop mode,why I must select open-loop but not close-loop?If I select close-loop,the servo motor doesn't work too.
3,If I want my two servo motors run at different velocity,How shoud I do?It seems I just can set the same velocity in MAX for my two servo motors.
My English is poor,Pls pardon me!I come from China.
Thank you for your help!
EnquanLi
Striving is without limit!Hi,Jochen,
Thank you for your kindly help!
The manufacturer of the drive and motor that I am using now is Japan SANYO DENKI,drive type is RS1A01AA,motor type is R2AA06020FXP00.
And I use position control mode,thehe encoder's counts per revolution is 131072.I set the electronic gear ratio to 1:1 for drive.
Now,I can use Close-Loop to control the motor but still has some problems.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.The detail situation is as following
1,Motor can't run.
2, Or motor moves to a position, then moves in the same direction agian and eventually stops.
Except for the two points mentioned above,"Following Error" is occured frequently,I don't know why.
I am still not clear why I must set the motor type be stepper in MAX .
And I have another question:what the relationship between the steps and the counts?They have the proportion relations?I notice that there are a section said like this in help document: For proper closed-loop and p-command operation, steps per revolution/counts per revolution must be in the range of 1/32,767 < steps/counts < 32,767. An incorrect counts to steps ratio can result in failure to reach the target position and erroneous closed-loop stepper operation.
I am verry sorry I have too many questions!
I am very appreciate for your kingly help!Thanks again!
EnquanLi
China
Striving is without limit! -
I'm working from a boat in a harbor in which the ISP has deployed numerous access points around the periphery. All the access points share the same SSID and each is configured to use either channel 1, 6 or 11. From my location, there are over a dozen of these access points "visible" (based on the the output of WiFi Scanner) with a range of RSSI and S/N values that vary over time.
The ISP has told me that the quality of my connection should be "perfectly fine" for any access point with an RSSI value better than -75, but I know from experience that my connection quality is miserable (i.e. < 50Kbps download) for almost all of these, including those with RSSI values better than -75. There is at least one exception, however, which gives me on the order of 2Mbps download, which is "great" in this context.
I've tried using a more powerful USB antenna plugged into my MacBook Air (mid 2011), but as far as I can tell, it really doesn't make much difference. Neither does my location within the boat. The overriding factor seems to be which access point I happen to connect up to.
I should point out that the closest access points are about 75 yards away, with many of them being several hundred yards away or more. I'm guessing that even though the signal strength of some of the distant access points is causing them to get "chosen" some times, the results are unacceptable due to the distance.
I'm hoping that I can determine, through experimentation, which access point(s) provide(s) acceptable performance and then configure my Mac to limit my connection to those points through whatever mechanism I need to use (e.g. channel, MAC id, etc.).Establishing a wireless connection with a client computer is left to the access point for various reasons. One reason that your Mac may not connect to the strongest access point is that it may have reached a limit of the number of clients it can serve, leaving it unable to accept a connection with another. The limit may not be very large.
Suppose that happens, and your Mac establishes a connection with a more distant access point having a weaker signal. Then, suppose a client drops off the network. Doesn't this mean your Mac will switch to the stronger access point? Not necessarily. The throughput delivered to and from your Mac would have to drop below a threshold specified in the AP for it to drop the client, leaving your Mac free to connect with another one. The reason for this is to prevent rapid switching from one AP to another in an area in which two signals are of approximately equal quality. If that were to occur the frequent and repetitive handshaking between the two devices would slow throughput to zero.
In an environment in which several access points are broadcasting the same SSID, Apple provides no insight as to how it determines which access point to choose. This is the reason I suspect this "choice" is a function of the router, or access point. The connection originates with it, not the Mac.
Now, what would solve your dilemma would be to determine a way to control the access point with which your Mac connects, by specifying the access point's unique MAC address for example. In this happy circumstance, you could maintain an editable "whitelist" or "blacklist" of the harbor's access points and be able to choose which among them you prefer.
I do not believe OS X maintains such a record of MAC addresses though, only those of the routers it uses. If I am correct about that, such a solution is unlikely to exist. Don't let that discourage you from searching for one though... I would concentrate on something like "selecting access point by specific MAC address".
I did find this patent application though:
Roaming Network Stations Using A Mac Address Identifier To Select New Access Point
Perhaps it's a start -
Questions about Access Manager tutorials available in netbeans site
Hi
Thank you for reading my post
I have some questions about two tutoral which i find in :
http://www.netbeans.org/kb/55/amsecurity.html and
http://www.netbeans.org/kb/55/amsecurity-liberty.html
here is my problem :
we have some web services, now we want to have authentication applied for consumer who try to access our web services.
we need to have most possible flexibility because we may deploy the server for a customer with an already established Identity database ( Database Table with user details)
Also we need to have Transport level security using SSL.
I read and studied both of them and now i have some questions :
-I think Securing Web Services Using the SAML or UserNameToken is what we need for authentication and autorization of web service consumers?
is that right?
-Does Sun Java System Access Manager provide flexibility to authenticate user/password with a database table content?
-How we can apply roles in Sun Java System Access Manager when we authenticate users ?
ThanksImagine that we want to have an end to end security for our web services
we thought that we could use message level encryption to protect the soap message and also we should protect our web services from un-authenticated acess,
we will use userName token for this.
Our customer has large database which contains many user/password and role of those users.
some of web services should be available to higher role (manager) and not for all users.
so we should check a user role before we allows him/her to access a web service.
my question is whether Sun Access manager can help us with this? or there are other configuration or packages that we should apply to have this feature.
to explain more :
our client side is a swing application, users enter username/password to login into system. after they loged in, we send user/pass every time user want to request some data from some services. (is it good to send user/pass every time?)
We want Sun Access Manager to handle users authentication .
We also need to handle role related authorization, can Sun access manager handle this?
Thanks -
Some questions about javacard 2.1.1 and smartcardio
Hello i have some question about java card 2.1.1 and the smartcardio package.
1.) I want to sign a message with the Signature.ALG_RSA_SHA_PKCS1 algorithm. I use the following code in the applet to sign the message:
final static byte P1_CREATION_MODE = (byte) 0x01;
final static byte INS_SIGN_MODE = (byte) 0x60;
final static byte SmartCard_CLA = (byte) 0xB0;
private void signMessage(APDU apdu) {
byte[] buffer = apdu.getBuffer();
byte byteRead = (byte) (apdu.setIncomingAndReceive());
signature.init(privateKey, Signature.MODE_SIGN);
short length = signature.sign(buffer, ISO7816.OFFSET_CDATA, byteRead, buffer, (short) 0);
apdu.setOutgoingLength((short) length);
apdu.sendBytesLong(buffer, (short) ISO7816.OFFSET_CDATA, (short) length);
apdu.setOutgoing();
}On the host side I use the following code to connect to the card and to send the sign apdu:
if (TerminalFactory.getDefault().terminals().list().size() == 0) {
LOGGER.log(Level.SEVERE, "No reader present");
throw new NoSuchCardReader();
/* Select the first terminal*/
CardTerminal terminal = TerminalFactory.getDefault().terminals().list().get(0);
/* Is a card present? */
if (!terminal.isCardPresent()) {
LOGGER.log(Level.SEVERE, "No Card present!");
throw new NoSuchCard();
/* Set the card protocol */
Card card = terminal.connect("*");
ATR atr = card.getATR();
LOGGER.fine(getHexString(atr.getBytes()));
LOGGER.fine(getHexString(atr.getHistoricalBytes()));
CardChannel channel = card.getBasicChannel();
CommandAPDU cmd = new CommandAPDU((byte) 0xb0, (byte) 0x60, (byte) 0x01, (byte) 0x00, new String("datadatdatadata").getBytes(), (byte) 0x40);
ResponseAPDU response = channel.transmit(cmd);
card.disconnect(false);But this does not work and i got the following error
javax.smartcardio.CardException: sun.security.smartcardio.PCSCException: Unknown error 0x8010002f
at sun.security.smartcardio.ChannelImpl.doTransmit(ChannelImpl.java:202)
at sun.security.smartcardio.ChannelImpl.transmit(ChannelImpl.java:73)
at de.upb.client.smartmeter.SmartMeter.initSmartCardApplet(SmartMeter.java:114)
at de.upb.client.smartmeter.SmartMeterApplikation.main(SmartMeterApplikation.java:39)
Caused by: sun.security.smartcardio.PCSCException: Unknown error 0x8010002f
at sun.security.smartcardio.PCSC.SCardTransmit(Native Method)
at sun.security.smartcardio.ChannelImpl.doTransmit(ChannelImpl.java:171)
... 3 more2.) 3Des encryption
I want to use the 3Des algorithm to encrypt my data. I use
keyDES = (DESKey) KeyBuilder.buildKey(KeyBuilder.TYPE_DES,
KeyBuilder.LENGTH_DES3_2KEY, false);
cipherDES = Cipher.getInstance(Cipher.ALG_DES_CBC_ISO9797_M2, false);But i do not know what is the aquivalent on the host side??
3.) Another problem is that i am not able to send the modulus of a public key from the host applikation to the smard card
new CommandAPDU((byte) 0xb0, (byte) 0x20, (byte) 0x01, (byte) 0x00, modulus.toByteArray()); // create the apdu
// the method in the applet
private void setServerKeyMod(APDU apdu) {
byte[] buffer = apdu.getBuffer();
try {
byte byteRead = (byte) (apdu.setIncomingAndReceive());
short off = ISO7816.OFFSET_CDATA;
// strip of any integer padding
if (buffer[off] == 0) {
off++;
byteRead--;
publicKeyServer.setModulus(buffer, off, byteRead);
} catch (APDUException ex) {
ISOException.throwIt((short) (SW_APDU_EXCEPTION + ex.getReason()));
}The error code is 6700
4.) My last problem ist, that i am not able to use a value bigger than 0x7F as the ne field in the apducommand, because i get the following error
CommandAPDU((byte) 0xb0, (byte) 0x60, (byte) 0x01, (byte) 0x00, data, (byte) 0xff);
java.lang.IllegalArgumentException: ne must not be negative
at javax.smartcardio.CommandAPDU.<init>(CommandAPDU.java:371)
at javax.smartcardio.CommandAPDU.<init>(CommandAPDU.java:252)I thought that it this should be possible in order to use all the bytes of the response apdu.
If you need more code to help please let me know.
Cheers
Edited by: 858145 on 06.07.2011 08:232) What is PKCS? what is the difference between
PKCS#11 and PKCS#15??PKCS is the abbreviation of "Public-Key Cryptography Standards"
PKCS #11: Cryptographic Token Interface Standard
See http://www.rsasecurity.com/rsalabs/node.asp?id=2133
PKCS #15: Cryptographic Token Information Format Standard
http://www.rsasecurity.com/rsalabs/node.asp?id=2141
If you want to use yor smartcard as secure token it doesn't have to be a JavaCard.
BTW: I don't remember a way to access PKCS#15 tokens on a JavaCard from within an oncard JavaCard program. If you want to use keys in your oncard program, you have to transfer it onto the card or generate it oncard and export the public key by your own oncard/offcard code.
Jan -
Question: about accessing Nik collection through Lightroom
I have recently purchased and installed Nik collection. I have no problem reaching the plug-ins in Photoshopbut can't in Lightroom (except for HDR)
Thanks! Technology senses my fear and always makes it difficult for me! Ha! I can use the Nik programs so if I have to, I'll work on them there.
Date: Sat, 13 Apr 2013 16:27:45 -0700
From: [email protected]
To: [email protected]
Subject: question: about accessing Nik collection through Lightroom
Re: question: about accessing Nik collection through Lightroom
created by trihelm2 in Photoshop Lightroom - View the full discussion
I suspect there are potential issues on some systems with the Google "combined" version, when I installed it I had recieved a copy of the Google complete version free because of my purchase history. I was advised that I could install over the Individual Plugins I had. I never got as far as trying it with Lightroom, only in Elements. The plugins appeared but the load times were abysmal and I mean realy bad , far longer than the Nik individual Installs, so I dumped it and reverted to the originals. Pity cos I wanted the Sharpen Plugin that I have'nt got. After reverting all was back to normal The Nik individual Plugins load very quickly. It was this that convinced me there is a difference in the Google setup.There are people on here with far more knowledge than me, hopefully one of them can help you, alternatively you might try asking Google for help with this.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5232723#5232723
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5232723#5232723
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5232723#5232723. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Need some info about getting started with the GE70 2PC Apache
Hi guys!
I'm about to getting the new GE70 2PC Apache gaming notebook from MSI and since I'm really putting alot of money in this I really wanna handle it gently :p So I got some questions about this, since It'll be the first time I'd but a gaming notebook.
1) 1st of all, what do I do when I've first started the laptop? Do I place in the CD and install all the newest drivers from that CD? Afterwards install an anti virus and then I should be good to go?
2) I heard the Haswell i7 processors from Intel produce a hell of a lot heat. When I turn on turbo fan and turbo boost and I reach temperatures of around 90°C, would it harm the hardware of my laptop? Could any damage take place? Or would my processor/graphic card have a shorter life expectancy?
3) The graphic card would be the GTX 850m. Now I'm wondering, is on this particular laptop -> (MSI-ge70-2pc-019be-apache-azerty), is the graphic card the DDR3 version or the GDDR5 version? Because I heard even the GTX 765m can outperform the 850m DDR3. But I also heard that the GDDR5 version of this graphic card is noticeably better than the 765M graphic card.
4)Is it wise to keep the processor going on turbo boost (3,4 Ghz) forever?
5) Will I have internet problems? I heard alot of people having internet problems with the killer lan drivers lately..
6) What laptop do you think I should pick in overall? The 2PC Apache version or the GE70 2OE version (the one without SSD) ?
8) My Brother has the GE70 2OE which has the 765m graphics card, but he only has around 60 fps when he's playing League Of Legends, and LoL isn't the most demanding game right.. The FPS sometimes even drops to 40 (even when he's ALONE with no one around him). It feels like his FPS is capped at 60? Because most of the time it's just 60. But when I look at the settings I saw the FPS is uncapped.. I believe with this graphics card he must atleast achieve a constant 70-80 fps on this game right? Might something be wrong in the settings of the graphics card?
7) Is there anything I should know before I start gaming on this laptop? (something I should do to have best performance or something..?)
GrtzWell...
1. When you get the laptop, use MSI Burn Recovery and make the backup disks (I prefer DVD's myself...). This way if something happens, you can reinstall all the software like you just bought it.
2. Haswell does produce quite a bit of heat. As long as you don't get much higher than 90C you should be ok. If you're getting into the high 90's or even 100C range, you probably need to replace the heatsink compound. MSI has had a number of issues with that aspect on notebooks. It is easily done though.
3. The only way to really answer that question is probably to contact MSI about it. >>How to contact MSI.<<
4. Turbo boost isn't really user controlled. I wouldn't worry about it.
5. You might have issues. I'm honestly not too sure. I know most people haven't had issues recently, but that's all relative. The drivers seem to be working rather well right now to be honest.
6. Depends what you want and what is available. Maybe the GE70 20E + buy an SSD will be cheaper than just buying the Apache version. I don't really know, but you could always look into it.
8. The 765M is a decent card....but remember, it's NOT the same as a 760 on a desktop. It's roughly equivalent to a 750 in the desktop world. That's not a bad card by any means, but you aren't going to be able to get 60+ FPS at 1920x1080 in many games. LOL is rather demanding as a game though to be perfectly honest. (throwing my personal opinion in on this, I always buy the highest end item I can in this case, because you won't be able to get any better really in the end until the next laptop comes out).
7. I would setup all your games in the NVidia control panel to use the NVidia high performance graphics processor. That way there is no confusion and it will use the right video card.
You don't really need to update drivers UNLESS you're having an issue (like BSoD's or game freezes or something similar).
The MSI customer service in the EU really seems to be hit or miss. Some people seem to get good service, some people get really crappy service. I'm honestly not sure what the problem is over there. =/ -
Some question about fade in // fade out by hideEffect and showEffect in Actionscript
Some question about fade in // fade out by hideEffect and
showEffect in Actionscript
Please kindly take a look at the following page:
http://camusmiu.no-ip.com/HounganQuestion/PictureHolderTest.html
(can view source)
I tried to make an image preloaded and scale the image to
it's preferred size.
When I came to consolidate the stuff into a component, I
found the application goes weird as I implementation the show/hide
effect.
The third trial which just hide and show the images directly,
instead of using viewstack, fail to bring the second image onto
screen.
It just used fadeOut instead of fadeIn(you see there is a
flash of the second image)
After some study of showEffect and hideEffect behaviour,
seems the mechanism of hide/show a component works in this way:
this._fadeIn:Fade = new Fade();
this._fadeIn.alphaFrom = 0;
this._fadeIn.alphaTo = 1;
this._fadeIn.duration = 1000;
this._fadeOut:Fade = new Fade();
this._fadeOut.alphaFrom = 1;
this._fadeOut.alphaTo = 0;
this._fadeOut.duration = 1000;
Component_A.visible = true;
Component_A.setStyle("showEffect", this._fadeIn);
Component_A.setStyle("hideEffect", this._fadeOut);
then when I set Component_A.visible = false, the sequence
works like following:
Component_A.visible = true
Component_A.visible = true, alpha = 100;
Component_A.visible = true, alpha = 50;
Component_A.visible = true, alpha = 0;
Component_A.visible = false;
The above sequence works visa versa as:
Component_A.visible = false;
Component_A.visible = true, alpha = 0;
Component_A.visible = true, alpha = 50;
Component_A.visible = true, alpha = 100;
Component_A.visible = true;
(Correct me if i am wrong)
========================================================================================== ====
From what I observe from the application, I have two
question.
1) When more than one component using the this._fadeIn,
this_fadeOut as the hide/show effects, the component in instance of
this._fadeIn? will it mess out if more than one component using the
fadeIn instance in the same time?
2) from the third component, i.e. PictureHolder3, when I load
other the picture , it fade out the new image instead of fading
in... Seems there is problem if I hide show too frequent. I think
when I hide then show right the way, the component only do the hide
part...
Can someone pls look into it and tell me what I did wrong?
Cuz in normal practice I don't think appropriate to use ViewStack
in Actionscript...Hello Jack,
Currently, you can only import an swf file or you can embed videos from youtube, vimeo etc. into Muse / add HTML5 Video to Your Website.
Take a look at these simple videos that explain the currently available processes for adding videos in Muse, in a step by step method:
1. http://tv.adobe.com/watch/learn-adobe-muse-cc/inserting-a-youtube-flic kr-or-hulu-video/
2. http://www.youtube.com/watch?v=5in4swnIFsw
3. http://www.youtube.com/watch?v=KnBFLQheOk4
Hope this helps.
Cheers
Parikshit -
Can I use the Ethernet Port of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
I have AE 5th gen
looking to buy (from ebay) the AEX A1264
Various computers, printers and hubs for the network
Is this possible to do?Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
Thanks Again.
Maybe you are looking for
-
I posted a question which was: Can anyone please tell me which version of Photoshop Elements will work with Mac 10.6.8 Snow Leopard. Then this window popped up saying mark this discussion with as a question and this window. I have no idea how this
-
Conversion mapping is losing time zone data during daylight saving time
We have a problem with conversion of Calendars to timestamp with timezone for the last hour of Daylight Saving Time (e.g. 01:00 EDT - 01:59 EDT) where it is being interpreted as Standard Time which is in reality 60 minutes later. We've written a JUni
-
Creating a pdf reader edible form that can submit.
So I am fairly new to Adobe acrobat, but I created a pdf form and saved the form to be reader-enabled so anyone can open the form and fill it out and then email the form back. The problem I am experiencing is when the pdf form is saved with reader an
-
Audio played over more than 1 slide, but less than the whole presentation?
Anyone know how to have music play over, let's say 3 slides in Keynote 09?
-
VERY Slow Responses in iTunes When Deleting
Hi, Can anyone help me with a problem of VERY slow responses in iTunes when I try to delete or amend track information. For example when I click on delete it can take several seconds or more to respond and again when I confirm the deletion or amendme