Some question about Cisco Prime Infrastructure

Dear all
I have some question about using Cisco prime Infrastructure:
- Can I show how many user access to one Access Point (AP) ?
- If I can. What is display information of user ? etc Ip address, MAC, username access, name of device (notebook, tablet, phone ..)
- How many time do Cisco Prime Infrastructure refesh user  informantion .?
Please help me and send picture about it if you can.
Thank you so much.

Hi,
I don't have the Prime Infrastructure to post you image, but you can simply find all the answers you want on the config guide:
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/clientmgmt.html#wp1232242
1- You can surely find how many clients associated to a specific AP.
- Informaiton of the client usually includes username, SSID, ip address, mac address, RSSI, device vendor...etc. I don't think it contains the device type (ipad or iphone both appear as apple vendor. it does not destinguish between this and that.
3- The time of the refreshment is configurable. You need to configure the corresponding background task for the poll period. (this is also metnioned in the link above).
HTH
Amjad
Rating useful replies is more useful than saying "Thank you"

Similar Messages

  • About Cisco Prime Infrastructure

    Hi :
    I have created a report on PI,
    In the daily report, you can see the total traffic is 24.84GB, while Average Traffic per Client is 0.04MB, and the total number of clients are 652.
    652 * 0.04 = 26.08 MB.    It’s 1000 times different with 24.84GB;
    And I don’t know the difference between “Number of Clients” and “Number of Users”

    Picture has been attached.

  • Cisco Prime Infrastructure 2.2 configuration export

    Hello,
    I have a question about Cisco Prime Infrastructure 2.2.
    Is it possible to export all the configurations every day automatically in .cfg format to an external
    server (preferably SCP or SFTP). Or any other way to export all the saved configurations from
    the database automatically in .cfg format

    You're welcome. 
    Please note the following update:
    You can export the configurations from the database via a manual process - you could probably script it and kick it off via cron if you are handy with that sort of thing.
    The export process is explained in a post by Vinod Arya in the Prime Infrastructure Ask the Expert thread.

  • Cisco Prime Infrastructure 1.2 licensing

    I have a customer that is running CiscoWorks 3.2 and they also have NCS 1.1 (upgraded from WCS 7.0).  They have found that it costs way more to upgrade CiscoWorks to Cisco Prime Infrastructure than it would be to just buy licenses after they finish upgrading NCS to Cisco Prime 1.2. 
    The main question about Cisco Prime 1.2 is how the licensing works, we need to know if the licensing will work the same as it did for CiscoWorks where they only needed one license for a full stack of switches.  They believe that Prime 1.2 will require a license for each switch in the stack, which will cause them to buy several more licenses than what they feel they can afford.
    If anyone knows how the licensing works, it would be appreciated.
    Thanks.

    Have you gone through the below link
    http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-infrastructure/guide_c07-714720.html

  • Question of Cisco Prime

    Hi everybody.
    I have one question about cisco prime infraestructure, i whish to know how the Cisco Prime control the link WAN of my enterprise.
    the topology is:
    ROUTER --> MODEM --> ISP
    I supossed that CP must have the assurance lincense, for use the control with netflow, but i whish to know how i can monitored the link between the modem and the ISP with the cisco prime.
    i can monitored the link with the soft. Intermapper, i whis to know if the Ciso Prime 1.2 could perform this action.
    Regards

    Well the situation is like this... I am monitoring several wireless network devices. Some are connected by 3G and others via some other technology.
    As you probably already know wireless connections are situational. Sometimes they work and sometimes they don't. What I want to achieve is to reduce the number of false positive alarms from these devices.
    The current plan is to increase the timeout to the maximum (60 seconds) and the number of retries to a high enough number to make false positives statistically unprobable.
    I would still like the devices to get polled quite often for a quick response, for example each 4 minutes (240 seconds).
    The optimal situation would be the following:
    Poll repeatedly each 4 minutes...
    For each successful poll, the timer resets and after 4 minutes another poll happens, except for when the poll is not successful. When this happens no new polling instances get started and the polling instance that failed continues with a timeout of 60 seconds for X number of repetitions.
    As soon as one of the retries is successful, the timer resets and in 4 minutes time a new polling instance gets created anew. If however after all of the retries, the device still fails to respond to the polls an alarm should get created and in 4 minutes time, it's time to check if the connectivity has been restored.
    Hopefully the image is a little clearer now... This is why I'm interested in understanding if new polling instances get started independently or not.

  • Cisco Prime Infrastructure and VLAN fetch

    I have about a dozen systems which are showing up under the Archive Failed Devices section of Device Work Center -> Configuration Archives.  The reason is Fetch VLAN configuration - Command failed.  All of the affected devices have something in common in that they are all managed by hitting a publicly routable IP address outside of the network on which the NCS server lives (NCS IP is 172.19.40.51).  To the devices, NCS looks like it is coming from an publicly routable IP address (because it is NAT'd by the firewall).  I suspected that the issue was that NCS was trying to TFTP the VLAN.dat file to the NCS server but that it was trying to send it to 172.19.40.51 instead of the NAT address.  I turned on debugs on one of the affected devices and sure enough I see that the device is trying to TFTP something to 172.19.40.51.  Of course that will never work.  I can find no way within the Admin UI of Cisco Prime to change this behavior such that NCS will try to collect the VLAN.dat file in some other way or use the NAT'd IP address for the copy attempt.
    Is there a way to get it to use something other than TFTP?  Is there some way to turn this off entirely so that it doesn't show up in the Archive Failed Devices section?  Prime seems to be able to parse the VLANs by way of the configuration file (since we use transparent mode throughout) so it seems like an extra step I don't need.

    Marvin,
    This is where everything goes off the rails for me when it comes to understanding Prime Infrastruction, Prime LMS and everything that you're talking about.  Refer to this link:  http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-lan-management-solution/data_sheet_c78-697479.html
    How should I interpret this?:
    "Cisco Prime Infrastructure 1.1 bundles campus switch, branch, core routing, and wireless LAN management into a single, easy-to-order solution that enables businesses and enterprises unparalleled operational efficiencies and investment protection. The bundle consists of:
    ● Cisco Prime LAN Management Solution, which delivers simplified management of Cisco® Borderless Networks and reduces operations costs by aligning network management functionality the way network operators do their jobs
    ● Cisco Prime Network Control System, which provides complete wireless LAN management with converged user and access management, and integrated lifecycle management of branch routers
    For more information about Cisco Prime Infrastructure, please visit http://www.cisco.com/go/primeinfrastructure."
    Am I wrong to assume that the first bullet point, which states "Cisco Prime LAN Management Solution" is referring to Prime LMS 4.2?
    Thanks,
    Steven

  • Ask the Expert: Cisco Prime Infrastructure - Implementation and Deployment

    Welcome to the Cisco Support Community Ask the Expert conversation.
    This Ask The expert Session will cover questions spanning Cisco Prime Infrastructure on Implementation and Deployment on Wired and Wireless. This will be more specific to Customer’s and Partners questions product covering PI on configuration, Features and Menu, Network Monitoring, Maps, Implementation, High Availability and Maintenance and t/s parts.
    Monday, February 2nd, 2015 to Friday, February 13th, 2015
    Dhiresh Yadav is a customer support engineer in High-Touch Technical Services (HTTS)  handling supporting Wireless and Network Management based Cisco products and is based in Bangalore. His areas of expertise include Cisco Prime Infrastructure and Cisco Wireless products. He has over 7 years of industry experience working with large enterprise and service provider networks. He also holds CCNP (RS) and CCIE (DC) certifications.
    Afroz Ahmad is a customer support engineer in High-Touch Technical Services (HTTS)  handling supporting Wireless and Network Management based Cisco products and is based in Bangalore. His areas of expertise include Cisco NMS products like Prime Infrastructure, LMS, IP SLA and SNMP etc. He has over 7 years of industry experience working with large enterprise and service provider networks. He also holds CCNP (RS),CCIE (DC), and SCJP (Sun Certified Java Professional )
    Vinod Kumar Arya is a customer support engineer in High-Touch Technical Services (HTTS)  handling supporting Wireless and Network Management based Cisco products and is based in Bangalore. His areas of expertise include Cisco NMS products like Prime Infrastructure, LMS, IP SLA and SNMP etc. He has over 8 years of industry experience working with large enterprise and service provider networks. He also holds VCP 5 and RHCE certifications.
    ** Remember to use the rating system to let the experts know you have received an adequate response.**
    Because of the volume expected during this event, the experts might not be able to answer every question. Remember that you can continue the conversation in the Network Infrastructure community, > Network Management, shortly after the event. This event lasts through February 13th 2015. Visit this forum often to view responses to your questions and those of other Cisco Support Community members.

    Hello Wilson,
    Thanks for joining us.
    1841 should just work fine for net flow . Hope you have a valid "PI Assurance license" installed on the server.
    "PI Assurance license" is required for "net-flow"  feature
    Devices supporting Netflow in PI ::
    1400, 1600, 1700 & 1800
    2500, 2600 & 2800
    3600, 3700, 3750 & 3800
    4500 & 4700
    AS5300 & 5800
    7200, 7300, 7400 & 7500
    Catalyst 4500 ASCI
    Catalyst 5000, 6500, & 7600 ASCI
    ESR 10000 ASCI
    GSR 12000 ASCI
    Cisco IOS Software Release Version
    Supported Cisco Hardware Platforms
    11.1CA, 11.1CC
    Cisco 7200 and 7500 series, RSP 7200 series
    12.0
    Cisco 1720, 2600, 3600, 4500, 4700, AS5800 
    RSP 7000 and 7200 series
    uBR 7200 and 7500 series
    RSM series
    12.0T, 12.0S
    Cisco 1720, 2600, 3600, 4500, 4700, AS5800 
    RSP 7000 and 7200 series
    uBR 7200 and 7500 series
    RSM series, MGX8800RPM series, and BPx8600 series
    12.0(3)T, 12.0(3)S
    Cisco 1720, 2600, 3600, 4500, 4700, AS5300, AS5800
    RSP 7000 and 7200 series
    uBR 7200 and 7500 series
    RSM series, MGX8800RPM series, and BPx8650 series
    12.0(4)T
    Cisco 1400, 1600, 1720, 2500, 2600, 3600, 4500,
    4700, AS5300, AS5800
    RSP 7000 and 7200 series
    uBR 7200 and 7500 series
    RSM series, MGX8800RPM series, and BPx8650 series
    12.0(4)XE
    Cisco 7100 series
    12.0(6)S
    Cisco 12000 series
    NetFlow is also supported by these devices Cisco 800, 1700, 1800, 2800, 3800, 6500, 7300, 7600, 10000, CRS-1 and these Catalyst series switches: 45xx, 55xx, 6xxx.
    NetFlow export is also supported on other Cisco switches when using a NetFlow Feature Card (NFFC) or NFFC II and the Route Switch Module (RSM), or Route Switch Feature Card (RSFC). However, check whether version 5 is supported, as most switches export version 7 by default.
    You can check the below steps to diagnose the issue::
     To verify that NetFlow is exported from a device to PI, follow the steps below:
    1)    Browse to Administration > Data Sources page. Check the value in column ‘Last Active Time’  for the ‘Device Data Sources’ table. If the table is empty or  the value does not represent recent time, then
    it is possible that the device is not exporting NetFlow or PI Assurance license is not applied / expired.
    2)    Login to PI console ( via SSH) as root user and run the command:
                    netstat –an | grep 9991 – Output of this should be like :  udp        0      0 :::9991         :::*
                    Check the firewall settings on PI server using the command: firewall -L
    1)    Check the configuration on an IOS / IOS –XE device. Run the commands
    a)    sh running-config | inc destination
    1)    This should list the IP address of the PI SERVER ( along with other outputs if any)
    b)    sh running-config | inc 9991
    1)    This should list at least one entry.
    c)    If the above are fine, then verify that the flow monitor, flow exporter and the flow records are correctly configured on the device.
    Refer to the URLs below to configure NetFlow export.
    http://preview.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/user/guide/setup_monitor.html#wp1056427
    Thanks-
    Afroz
    ***Ratings Encourages Contributors ****

  • Monitoring ASA in Cisco Prime infrastructure 2.2

    Hi everybody.  I have some issue with cisco Prime Infrastructure  2.2.  We use this product in our network for monitoring network devices and I need to monitor also our ASA 5550 device with soft 8.4.  I  added ASA to Cisco PI but see only basic component like my device can reachable via  and read via snmp. But cannot see  CPU, RAM, Device ENV like Temperature, l2l vpn connection,  Interfaces status and Utilization that interfaces, cannot see sub interface that placed on ASA like that g0/0.20.  I need fully monitor ASA and See logs and trap for my device:
    CPU RAM ENV (Temperature), Interface and sub interface status, L2L VPN  Status.
    1 Cisco Prime infrastructure can full support  ASA for monitoring and logging.. IF YES how can i configure  that features in Cisco PI 2.2 for ASA
    2 IF not which product Can full support that features for full monitoring and logging  ASA devices
    I have a little deadline for finishing
    thanks everybody before

    I've not success monitoring ASA interface utilization either. I'm using PI 2.2 with device update #1. The ASA is a 5585-X with 9.2(3) software.
    I have deployed the PI monitoring template to the ASA and do see its overall status and PI has enumerated the interfaces in the device page.
    I even looked at a packet capture and see PI querying the values of the interface counters and those values being sent back to PI - yet I cannot select any ASA interface when drilling down under Performance Detail monitoring.
    When I get some free time I will open a TAC case on it, meanwhile I am getting all the info I need from the upstream and downstream switches.

  • Cisco Prime Infrastructure 2.1 Express OVA failing to boot up

    Hi all, i'm wondering if you can help me, i'm trying to deploy Cisco Prime Infrastructure in a lab envrionment but it's not working correctly.
    I've deployed "PI-VA-2.1.0.0.87-Express.ova" to a VMware ESXI 5.1U2 hypervisor with 2x AMD 8128HE CPUs, 96GB RAM, ASUS KGPE-D16 motherboard. The installation works fine, I can answer all the questions and enter the IP address. Once the system reboots, it hangs at the following screen:
    "Kernel direct mapping tables up to 340000000 @ 10000-1c000" is the last thing I see
    Interestingly at this point I can actually ping the VM... I cant connect to the managemnet console on HTTPS though :(
    I did find some related info on a blog https://deekayen.net/kernel-alive-lock which mentions booting with "noapic", however when I try to press "P" on the grub boot loader it prompts me to enter a password which I dont know! My normal admin passwords arent working.
    Any help to ge tthis running would be greatly appreciated
    Thanks in advance
    Ben

    The server takes about 30 mins to boot up, it's not actually broken it's just extremely slow .. I have found numerous people reporting this issue online, and our production system also does this! I guess my original problem is solved, although I would prefer this issue not to exist!

  • When is Cisco Prime Infrastructure 2.0 released, and what does 2.0 offer?

                       We are running Prime Infrastructure 1.3 primarily for wireless management at this point.  We have enough licenses to add all our switches, routers, and firewalls, but we're hesitant to do so until 2.0 comes out.  While there are some features for backing up and configuring switches and routers, 1.3 still seems pretty limited in regards to non-wireless features.  For example, nearly every report in 1.3 is for wireless controllers or AP's, there are no reports I've found relevent for switches and routers.  I've read a lot of blogs, cisco posts, and white papers talking about how Cisco Prime Infrastrucure 2.0 will finally consolidate Prime into a truly all-in-one network management suite that can manage the entire Cisco environment.  Does anyone know when it's officially being released?  Does anyone have an tech sheets on what's new in 2.0, or what its capabilities are?  I want to better understand what 2.0 has to offer, when it's coming out, how to upgrade, so I can start planning for the upgrade and eventually importing all our network devices to Cisco Prime for centralized management.  Any useful information or links would be appreciated.
    Thanks,
    Christian

    PI 2.0 is in Beta mode for testing in closed group already. However it may still take some time to get released on CCO for FCS.
    I think it is expected to be released between aug-sep. BU has also started working on CPI 2.1, which you can see test uploads on CCO.
    For what does it have for customers?
    > As Cisco have a vision of one network Management software for both wired and wireless infrastructure, which started getting real partially with Cisco PI.
    As WCS got evolved to NCS and eventually to Cisco Prime Infrastructure, but it doesnt yet have full Management capability for wired infra., which is there with LMS.
    With CPI 2.x Cisco plans to blend entire LMS and WCS features together.
    -Thanks

  • Cisco Prime Infrastructure 2.0 and Cisco ASA

    Hello,
    We've recently installed trial version of Cisco Prime Infrastructure 2.0 Express. We hoped that it already supports Cisco ASA 55xx series (especially 5505, we have pretty amount of them). But we had some problems with PI and asa durind the exploitation process.
    First, I've added ASA to PI, and Inventory Collection Status is Completed, but I can't see CPU and RAM utilization graphs. Inventory.logs are non-informative.
    Also, config backup is success, but when I try to watch the backuped configuration at Configuration Archive PI says "Failed to fetch raw configuration". And so on.
    ASA version is 5505, image is 9.1(2).
    So, I have a question: is it possible to manage ASAs with PI 2.0?
    UPD: I've just tried to upgrade asa to 9.1(4), and behavior of the equipment is quite the same. Seems we shall wait for 9.2 to be released.

    Have you downloaded and applied the latest Device Pack updates?
    PI enhanced ASA support after the initial 2.0 release and the Device Packs incorporate that change.
    The README file for Device Packs explains how to install them. (A bug currently does not allow the direct download in PI so you need to follow the method for installation from local storage after you manually download. Here is a link to the download location.

  • Cisco Prime Infrastructure MESH LINK ISSUE

    Hi,
    a Customer of us has a trouble with cisco Prime Infrastructure 1.2.0.12 and AP mesh link.
    There is an huge database ( i suppose the issue can be here ) and when we display some map ( each floor has about 6 RAP and 24 MAP ) we cannot see the MESH information and link draw.
    The only way to dipley them is to disable "refresh from network": this way I'm able to show these link..... until a click before.
    What i noticied when all was working fine, after i click to some floor:
    1) the software started to show the map with normal color and no mesh info displayed ( just ap and coverage cloud )
    2) after few time ( less than 1 second ) the map was becoming a little bit lighter and the mesh info was merged to the map
    We are missini the second step
    Anyone had the same issue ?
    best regards
    Luigi
    PS: I opened a case with WCS version 6.0 ( same issue ) but, after some months, no risult. The last version working fine was WCS 5.2

    Just to add some more informations:
    - disabling "refreshj from network" ( building properties ) the link and mesh info are showed
    - while I'm on a floor, after some refresh, i loose the mesh link draw and, if i click on an AP, i loose also mesh info in the popup. It' s like, after some refresh, the AP are no more recognized as Mesh ( !?!? )
    regards
    Luigi

  • Cisco Prime Infrastructure and no new events / alarms since update to 2.2.1

    Hello,
    I have upgraded our Cisco Prime Infrastructure from version 2.1 to 2.2.1 (with a backup and restore). We have round about 700 APs and three 5208 Controller. So far everything seems to work really fine. The only problem is that there are no new alarms/events under "Monitor", "Alarms and Events".
    The last entries (events and alarms) are dated before the upgrade. Other informations (like client counts for example) are correct.
    Is there a known bug related to my problem? Can anybody help?
    Thanks

    I have done some research:
    I see the following problems in the log-package (downloaded from Prime):
    ===
    <msg time='2015-04-07T12:10:50.620+02:00' org_id='oracle' comp_id='rdbms'
     client_id='' type='UNKNOWN' level='16'
     host_id='rzprime' host_addr='xxx.xxx.xxx.xxx' module='JDBC Thin Client'
     pid='9499'>
     <txt>ORA-1652: unable to extend temp segment by 128 in tablespace                 TS_EVENTS 
     </txt>
    </msg>
    <msg time='2015-04-07T12:10:50.727+02:00' org_id='oracle' comp_id='rdbms'
     client_id='' type='UNKNOWN' level='16'
     host_id='rzprime' host_addr='xxx.xxx.xxx.xxx' module='JDBC Thin Client'
     pid='15177'>
     <txt>ORA-1652: unable to extend temp segment by 128 in tablespace                 TS_EVENTS 
     </txt>
    </msg>
    ===
    I think that there is a problem with a too small tablespace. But I can´t fix that. Anybody? ;)

  • WCS and LMS to Cisco Prime Infrastructure 1.3 Upgrade

    Hello,
    Our customer is currently having WCS for 500 devices and LMS 3.2 for 1500 devices. We are planning to upgrade to Cisco Prime Infrastructure 1.3.
    I want to check is the upgrade procedure that we have planned is ok or we have missed something.
    Phase 1: WCS to CPI 1.3 upgrade
    1. Check that WCS is at 7.0.230.0  version
    2. Export WCS database
    3. Install NCS 1.1.1.24 software
    4. Contact cisco to obtain trial license for NCS software (L-WCS-NCS1-M-K9 license).
    5. Migrate WCS license and import it in NCS software
    6. Migrate WCS data to NCS software using ncs migrate command
    7. Patch NCS software
    8. Inline upgrade to CPI 1.3 software
    9. Install proper licenses on CPI 1.3 (WCS and LMS device count)
    My concern in this first phase is should I use NCS large image since our Cisco Prime Infrastructure 1.3 software should manage 2000 devices at the end.
    Or is it better not to perform inline upgrade and insted go with exporting data from NCS and then importing them to CPI 1.3 that is going to be installed separately?
    Phase 2: LMS 3.2 to CPI upgrade
    1. Export LMS 3.2 database
    2. Install LMS 4.2 software
    3. Install license to LMS 4.2
    4. Restore data from LMS 3.2 to LMS 4.2
    5. Direct upgrade from LMS 4.2 to 4.2.2
    6. Export the device list with credentials from LMS 4.2.2  and import it as a Bulk Import in CPI 1.3
    At the end we will have CPI 1.3 and LMS 4.2.2 software running.
    Is it possible to directly upgrade from LMS 4.2 to LMS 4.2.4 and then import data to CPI 1.3 or we need to go with 4.2.2 version?
    Regards,
    Jelena

    Hello Marvin,
    We have restored LMS 3.2 SP 1 database on LMs 4.2 and we have got some error messages during restore. Please see our restore output:
    [kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/res
    resolver.pl           restoreDBTableMig.pl  restoreJRMMig.pl      restorebackup.pl     
    [kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/restorebackup.pl -d /opt/BKP/
    Restore started at : 2013/12/05 14:11:58
    Please see '/var/adm/CSCOpx/log/restorebackup.log' for status.
         USER ID is ..................................... : sysadmin
         OS of the backup archive is..................... : Windows
    INFO:The backup archive is from a different OS. Your current Platform is: Soft Appliance .
    You are attempting to perform a Cross Platform Restore..
    Do you wish to continue (Y/N) [Y] :Y
         Generation to be restored is ................... : 0
         Backup taken from............................... : /opt/BKP/
         Common Services version in the backup data is... : 3.3.1
         Common Services is installed in................. : /opt/CSCOpx
         The temp folder for this restore program........ : /opt/CSCOpx/tempBackupData
         Applications installed on this machine ......... : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][cwportal][ipm][upm][cvw][cwlms]
         Applications in the backup archive ............. : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][opsxml][cwportal][ipm][upm][cvw]
         WARNING: The list of applications installed on this CiscoWorks server does not match the list of
                  applications in the backup archive. If you restore data from this backup archive,it may
                  cause problems in the CiscoWorks applications.
                  Do you want to continue the restore operation?  (y-continue or n-quit, y/n)?Y
         Applications to be restored are................. : [Common Services] [Campus Manager] [Resource Manager Essentials] [Device Fault Manager] [cwportal] [ipm] [upm] [cvw]
         Available disk space in NMSROOT................. : 86451488 Kb
         Required disk space in NMSROOT.................. : 35906524 Kb
         (The temp and NMSROOT are on same device, therefore this required disk space includes temp space)
      Copying the backup files to the temporary location [/opt/CSCOpx/tempBackupData]
      preRestore of [Common Services] has started.
      preRestore of [Common Services] has completed.
      preRestore of [Campus Manager] has started.
      preRestore of [Campus Manager] has completed.
      preRestore of [Resource Manager Essentials] has started.
      preRestore of [Resource Manager Essentials] has completed.
      preRestore of [Device Fault Manager] has started.
      preRestore of [Device Fault Manager] has completed.
      preRestore of [cwportal] has started.
      preRestore of [cwportal] has completed.
      preRestore of [ipm] has started.
      preRestore of [ipm] has completed.
      preRestore of [upm] has started.
      preRestore of [upm] has completed.
      preRestore of [cvw] has started.
      preRestore of [cvw] has completed.
      doRestore of [Common Services] has started.
              Cross Platform Update started.
              Cross Platform Update completed.
              License check started.
                 WARNING: The license details in the server are different from the backup data.
                          After restoring, please check the license available in the server.
                 WARNING: Your current license count is lower than your earlier license count.
                          If you restore the data now, devices that exceed the current licence count
                          will be moved to Suspended state.
              License check completed.
              Restoring certificate.
                 WARNING: Cannot evaluate the hostname, hence the certificate
                          may be from this host or another host.
                          [  Certificate not overwritten  ]
              Restored Certificate.
              Restoring Common Services database.
              Restored Common Services database.
              Restoring CMIC data.
              Restored CMIC data.
              Restoring CMC data.
              Restored CMC data.
              Restoring Security Settings.
              Restored Security Settings.
              Restoring DCR data.
              Restored DCR data.
              Restoring Certificate key store.
              Restored Certificate key store.
      Restoring DCNM CrossLaunch data.
              Restored DCNM CrossLaunch function.
              Restoring JAAS configuration.
              Restored JAAS configuration.
              JRM Job Migration started.
              JRM job Migration done.
      doRestore of [Common Services] has completed.
      doRestore of [Campus Manager] has started.
              Cross Platform Migration for Campus started.
    Cross Platform update Starts for Campus
      doRestore of [Campus Manager] has completed.
      doRestore of [Resource Manager Essentials] has started.
    10% of RME  Restore completed
    30% of RME  Restore completed
    50% of RME  Restore completed
    70% of RME  Restore completed
    100% of RME  Restore completed
      doRestore of [Resource Manager Essentials] has completed.
      doRestore of [Device Fault Manager] has started.
    10% of DFM Restore completed
    30% of DFM Restore completed
    50% of DFM Restore completed
    80% of DFM Restore completed
    Going to modify Eight PM report 
    Modified Sucessfully Eight PM report 
    100% of DFM Restore completed
      doRestore of [Device Fault Manager] has completed.
      doRestore of [cwportal] has started.
    Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
      Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.properties  ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
    File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
    Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
    Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
    Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
      Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.script  ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
    File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
      Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.log  ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
    File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
    Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
    Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
    Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
      Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultUserCommunity.properties  ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
    File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
      Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultCommunity.properties  ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
    File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
    Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
      doRestore of [cwportal] has completed.
      doRestore of [ipm] has started.
            10% of IPM Restore Completed
            30% of IPM Restore Completed
            50% of IPM Restore Completed
            60% of IPM Restore Completed
            70% of IPM Restore Completed
            100% of IPM Restore Completed
      doRestore of [ipm] has completed.
      doRestore of [upm] has started.
    HUM database restore starts
    INFO:STOP= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
    SQL Anywhere Command File Hiding Utility Version 10.0.1.4239
    INFO: Database Shutdown is in Progress..Please wait
    INFO: Stop Engine Args= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
    INFO: After Database Shutdown RC= 2304
    root=C:\PROGRA~2\CSCOpx\databases\upm\upm.db
    DBUTILS: Inside Cross Platform
    INFO: Current Database password does not match the password of Database being restored
    INFO: Using the Password of the Database being restored
    HUM database restore successfully completed.
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate/README.txt
    Directory is reportsStarted changing property .
    linux
    Restored HUM configuration file successfully.
      doRestore of [upm] has completed.
      doRestore of [cvw] has started.
      doRestore of [cvw] has completed.
      postRestore of [Common Services] has started.
      postRestore of [Common Services] has completed.
      postRestore of [Campus Manager] has started.
      postRestore of [Campus Manager] has completed.
      postRestore of [Resource Manager Essentials] has started.
      postRestore of [Resource Manager Essentials] has completed.
      postRestore of [Device Fault Manager] has started.
      postRestore of [Device Fault Manager] has completed.
      postRestore of [cwportal] has started.
      postRestore of [cwportal] has completed.
      postRestore of [ipm] has started.
      postRestore of [ipm] has completed.
      postRestore of [upm] has started.
      postRestore of [upm] has completed.
      postRestore of [cvw] has started.
      postRestore of [cvw] has completed.
    Restored successfully.
    Are this errors going to affect our LMS 4.2 operations?
    Then we have upgraded to LMS 4.2.2 and exported data and credentiales for PI import.
    On PI 1.3 we have installed WCS 500 devices upgrade license and LMS 1500 upgrade license and now we are having 2000 devices lifecycle license. We have successfully restored WCS data in PI and we have imported LMS devices as bulk import. What is strange is that we have this message in prime regarding licensing:
    On LMS 3.2 our customer had saved unlimited number of configuration versioning. After upgrading to LMS 4.2 we can only see last 3 configurations regardless of unlimided number of configurations in previous LMS, so my question is where can we find older configurations in LMS 4.2?
    We are planning to turn unlimited versioning on CPI 1.3 now, so our customer will again have feature that they need. Do you have some experiance regarding disk space when all device configurations are stored forever?
    Thank you for your help.
    Regards,
    Jelena

  • Consultations on Cisco Prime Infrastructure 2.2

    I recently installed Cisco Prime Infrastructure 2.2 and I have 2 questions regarding configuration:
    1. What configurations should run for vulnerability when some event occurs on a switch an alarm is lifted in the Cisco Prime Infrastructure 2.2?
    2. Is there any way to put a device into maintenance mode in the web interface of Cisco Prime Infrastructure 2.2, so that can not be spoiled reports regarding equipment availability during the execution of maintenance?

    1. If you configure PI as an SNMP and syslog server for your devices and have enabled logging traps etc., PI's alarm browser will show the alarms. If you want them to be sent to you via email, you can do that under the Admin menu for setting up your Mail server and clicking the link to "Configure email notification for individual alarm categories." (see below - open in new tab to zoom). It's not completely customizable but what you see there is the current product capabilities in that regard.
    2. No, this is not currently an available feature in PI 2.2.

Maybe you are looking for