Some question and problems on FSB:Dram

Hi to all, i have a simple question fo you (i hope that's simple :D )
I have a p4 3.2 GHz like you can see here:
FSB is 200Mhz and it's ok
But i have 4 pc3200 ram modules in dual channel mode, i think that their frequency must be 200Mhz but it's only 160, and i can't activate pat, like yuo can see here:
Now my question is: Why?
Thank to all

Quote
Originally posted by NovJoe
Simple, as displayed in the second picture, you've set your DRAM Frequency to DDR 333MHz which will be detected as 320MHz for FSb 800MHz CPU on DDR 400MHz RAMs. Due to this, CPU-Z will think that you are running in 5:4 ratio instead of 1:1 ratio. To obtain 1:1 ratio, you must set your DRAM Frequency to 400MHz in BIOS and make sure that DDR Clock is reading it at 400MHz also before saving to CMOS. Check with CPU-Z again and you'll see that it'll display 200MHz(RAMs are double rated where you've to multiply the rates by 2) and ratio at 1:1.
Isn't so easy...
My actual configuration:
Dynamic Overclocking: Private
Performance Mode: Slow (If i put fast or greater... KABOOM :D)
CPU Ratio: Locked
DRAM Frequency: 400Mhz
Spread Spectrum: Disabled
Adjust CPU Bus Clock(Mhz): 200
DDR Clock: 333 (Adjust AGP/PCI Clock (Mhz): 66.66/33.33
CPU Vcore Adjust: NO
CPU Vcore: 1.5500V
DDR Power Voltage: 2.65V
AGP Power Voltage: 1.55V
I can't understend why DDR Clock is 333 :(

Similar Messages

A way to find my previous questions and problem reports?

Is there a way on this forum to find my previous questions and problem reports? Since posting a question earlier today, I've found MOST of the answer and would therefore like to append what I found to the question, without waiting for someone else to answer it. I don't remember the title I gave the earlier question, or I'd use that title in searching for it.
The troubleshooting information below is more relevant to a previous problem than this question.

'''My Contributions''' link on a main forum page should display a listing of all your postings.
[https://support.mozilla.com/en-US/search?q=&num_voted=0&num_votes=&asked_by=milesrf&answered_by=&q_tags=&created=0&created_date=&updated=0&updated_date=&sortby=0&a=1&w=2 See this forum search for your Username under "Asked by"]

HT5312 I cant remember the answer to some questions and they blocked my account. I've been sending requests for them to send it to my mail like 20 times and nothing. What can I do?

I cant remember the answer to some questions and they blocked my account. I've been sending requests for them to send it to my mail like 20 times and nothing. What can I do?

Click here, phone Apple, and ask for the Account Security team.
(87657)

TS2446 Hello, I'm Bethany and I'm having trouble with my apple ID I tried to buy something from he app store and they assed me some questions and anyway i have locked my account and don't know how to unlock any help with be very helpful thanks.

Hello, I'm Bethany and I'm having trouble with my apple ID I tried to buy something from he app store and they assed me some questions and anyway i have locked my account and don't know how to unlock any help with be very helpful thanks.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Apex 3.1. Interactive Report. Questions and Problems.

Hello!
First of all I'd like to say Interactive Report is a really really brilliant feature, it covers exactly that points which we were missing in previous releases of Apex. Only this single feature makes Apex 3.1 release most significant for us since may be HTML DB 1.6. So much much thanks!
So I have some questions about Interactive Report (IR):
1) About "Save Report" feature. It is possible there to save own version of report layout or overwright the default settings. There is also possibility to completelly disable this function. So the question is it possible to disable only the ability to overwright the default report but give the ability to save own reports. It would be reasonable since too smart or too dum users can break the default layout of report and break the work for other users which don't use this function at all. At the same time the possibility to save own reports
is absolutelly perfect
2) Search. I'm from Germany and we have some national non-english symbols. The IR can't perform seach correctly if we use words with such symbols. Example word "Bestätigt" is interpreted by IR as "BestÃ¤tigt". At the same time the words are correctly displayed in reports and in interface. We have correct NLS_LANG, we have imported the lang_de.sql , and our own self-made search on simple reports works ok. What's to do?
3) Charts in IR. Is there some data volume limits for Chart in IR ? sometimes we get the message "Loading XML...100%" during chart rendering and then happens nothing. In log file of Apache there is no any error messages...
Thanks in advance,
Alex

Hi Alex,
Glad to hear you're putting interactive reports to use, we put in a lot of time trying to get them right (at least for their first release).
1) The "Save As Default Report Settings" option is only available for Developers, so you can only see it if you already see the developer toolbar at the bottom of the page. Standard end-users can't see this, so they can't save over your default report settings.
2) That's right, the character set of the DAD needs to be AL32UTF8.
3) A maximum of 1000 chart points will be returned, but you should not get this error. Can you describe the columns you are charting and the chart settings?
- Marco
Message was edited by:
MAdelfio

Newbie to keynote; some questions and some observations about this group

Hello, my attn was called to this group. I have seen some impressive presentations in keynote so maybe it is time to switch.
From what?
I do a lot of presentations. I use acrobat. Prepare my page in whatever app is best for the job; print to pdf; include fonts. By using the app of my choice I get just what I want in my slide.
I can readily arrange slides in sorter in acrobat. Allows minimal animation, by, say, preparing the full slide, make copies, and delete progressively. sort to show from the least to the fullest; works for me.
pdf allows touch up text and adding text, which I often think of at the last minute. Drawing an oval or line to point to something. For heavier editing open a slide in illustrator and save as pdf.
So, as I say it works for me. Not glitzy. Certainly pretty easy to produce decent slides.
Most everyone has acrobat on his/her machine, so if I take my presentation on a stick, it can work, nicely, cross platform. Very few occasions when that didnt work.
So I would like to hear folks' experiences. Can you take your presentation on a stick and show it on someone else's computer?
What about posting presentations. I generally put my pdf on my web page, giving the audience the url; seeems to work fine. Again I ask for experience.
Seems like quite a learning curve for keynote. And I browsed about 4 pages of discussion on this board before posting. I saw mostly complaints and problems, and not all that many solutions. And very few raves.
So, I would welcome some testimonials.
PS I dont want to do anything so glitzy that folks will come up to me after the talk and say nice animations; better they talk to me about the substance of my talk.
thanks in advance
-trog

Welcome to the forums, troglodyte.
If you want a testimonial, I think that Keynote is hands-down the easiest to use presentation tool, and produces by far the best-looking results. It is far ahead of PowerPoint.
Keynote produced beautiful results, even when converted to PDF, as it has very nice graphics features (e.g., drop shadows, masking, transparency). If you are most comfortable with PDF, and don't need animations or transitions, then Keynote still has a lot to offer. That said, much of the "wow-factor" of Keynote comes from its lovely and sophisticated transitions and animations.
(These features needn't be just eye-candy, either, as they can serve to emphasize points and help unify certain material. For example, I use transitions that are more obvious, such as the "Doorway", to mark major changes of topic in my presentations, and more subtle ones, like "Dissolve", to change between related slides. This "grammar" of transitions helps to make the presentation more comprehensible.)
Keynote is not cross-platform, so you can't put a native Keynote presentation on a memory stick and be assured that it will work on someone else's computer. However, PDFs make from Keynote should function just fine. Alternatively, you can use various of the other exporting options in Kenote, including Quicktime, Flash, and PowerPoint, to provide more cross-platform compatibility than Keynote does (each of these conversions has its own limitations however). And several of these formats are also appropriate for web deployment.
I find Keynote extremely easy to use. Do realize that these forums are primarily intended for troubleshooting, so you won't find a lot of generic compliments to the application.

Connection pool utilization - questions and problems.

Hi,
This is in context to JSP/Java/JPDK based web provider applcation. Appreciate it if anyone can add any input here -
1)After adding dbPersonalization to my JSP portlets I noticed that the connections in my connection pool have maxed out. After the first few page renderings, it breaks. I am not sure if its an inherent problem in my design. But, I do know that it started happening soon after I add the dbPersonalization with all its required setups as specified. Could that be possible ? Besides the connectionmanager.xml file required by the dbPersonalization setup, I also have my own connection properties file where I specify the min and max connections in the pool for all my java classes/methods to make use of. Is there a chance that the connection pooling information from both the files are clashing each other ??
2) On a related topic - I wanted to get some input on a design question. I have about 10 JSP Portlets on each of the four tabs of my Portal page, with each one instantiating one class (useBean) that contain methods to get data from the database. Now every single method of each of these classes, gets and puts a connection object from the pool.
The question is if the frequency of getting a conn object in every method of every JSP portlet too expensive ? Would it be better to make use of one connection object common to all the methods in a class/JSP/portlet ?
I had set the min to 6 and the max conns to 25 and it looks like very soon all 25 gets used, which wasnt happening before I added the dbPersonalization setup to my portlets. The dbPersonalizaiton is only for editDefaults though.
regards
-Ananth Makaram

Ryan,
as to your 7.2.1 problem: MANY people had that same issue and did revert to
7.1.1 (I did the same after being unable to connect once I upgrade) So no
worries - your AEBS is fine as it is working with 7.1.1
For the second part, I am not a wifi guy, but check out the article on
http://www.bbwexchange.com/pubs/2006/09/20/page1397-228167.asp
maybe that will give you some idea about WiFi 2.0 and if you benefit from it!
Joerg

A few Technical questions, and problem with entitlements

Hello everyone,
I always hate my first post being a question, or several in this case, but I have no other option and wouldn't have found this forum if it weren't for the knowledge already spread.
Background...
Using Windows Vista and Flash CS5;
I am using a second gen ipod touch;
Made a small Ball app;
Used the following videos followed to the "T" to make a Certificate, .p12 file, and provisioning file
certificate...
http://www.videomo.com/yvideo.php?i=bXB6U1hBcWuRpVzBxVUk&create-an-iphone-developer-certif cate-from-windows/
.p12 file...
http://www.youtube.com/watch?v=4GteMgFvA1Y
provisioning profile...
http://www.youtube.com/watch?v=ni-9jZPcZ1E&feature=related
To the best of my knowledge everything is setup in portal the right way... and i mean: Device is added, checked udid several times and device name is same...bundle ID is correct in publishing settings...I used my NAME (was a problem for some people) for CN when doing the above... I have dragged the profile to the library in itunes and synced. I have UPDATED my iphone to the 3.whatever platform, and updated itunes to 9.X ...I have dragged everything to library and synced...i have restarted ipod and comp several times...
i have tried publishing as test, beta debugging, and adhoc...no luck with any of them.
At first, i had a "app cannot be installed because the signer is not valid" error when syncing the app through itunes...but then i dragged provision profile to ipod and I now get...
"The application "Ball" was not installed on the iPod "Wiggles" because the entitlements are not valid."
I spent all night last night trying to diagnose this problem, found very little info, someone else posted here, but it was never resolved.
I have checked again and again that the device is the right device, and i have remade my certs, provisioning profiles...p12s....exports, publications...etc....again and again.
Please help!
SECOND question: Am I not going to be able to release any apps in the iphone store because of the apple not supporting flash thing? (basically, i'm asking if i should stop learning this, altogether and just learn a different language and platform for development for iphone.
I do not own a mac, so I am trying to work around that.....
Any advise is appreciated! Thanks !
thank you...
kmrproduction2

How did you solved, I have tried everything nothing works. My app id is 83TUF2RQRE.com.company_name.appstest, the screen from apple iOS Provisioning Portal -> App ID looks like this.....
Descriptions
Apple Push Notification service
In App Purchase
83TUF2RQRE.com.company_name.appstest
testapp
Configurable for Development
Configurable for Production
Enabled
I don´t know how to use it...... I'm working on WIN7 Flash CS5, I got an Ipad where i have to test a really simple app, and i cannot get installed cause of "entitlements issue". Ca Some one give a Hand on this one....
Thanks.....

Questions and problems with CS4

Hi, I'm trying out CS4. I have some problems and questions I hope someone can answer. I only care about the code editing part.
1) My "Open Recent" menu in the File menu is always empty. I've opened all kinds of files over the past few days and it never updates/adds to that list. its always empty. When is this suppose to update?
2) When I edit .inc files they're not color coded. How can I tell Dreamweaver to color code .inc files too? It doesn't matter which color code (.HTML, .PHP, etc.) it uses.
3) Whats the best way to change the color setup for a given file like .HTML? Edit some Dreamweaver .xml file or in the preferences somewhere? Or another way? is it possble to essentially create a custom color combination and apply it to HTML files?
4) How can I get rid of "Share My Screen" in the file menu? When I hit ALT-F, then S - I would like it to save the file out of habit. All I get is a share my screen now. Not sure what genious organized that but its kind of a stupid place to put it.
I'm under Windows 7 64bit. Dreamweaver version 10.0 Build 4117.
thanks for any help.

You can edit color coding in >edit>preferences (ctrl-u)...
...and whilst you are there you can select in the general tab to open the files you had open in your last session.
I don't konw why the list of files isn't populated and I don't know about .inc files.
Instead of using >ctrl-f >s why not go for ctrl-s or shift-ctrl-s?
Martin

Good day! My question and problem is, it's not secured to to download an apps because my account was hacked when I signed to Dropbox yesterday in my purchased- AlwaysOnPC Xform computing, and he/she got to me a .99$ on fb upload unlimited?

What can we do with this thing? There is any the best solution for this, cause me as a iPad user something can discouraging for my side to another iPad, or apps for my iPad. I have a plan now to buy a new generation ipa3 or even MacBook, and starting to earn and budgeting to by that thing. Right? Please give me some ad vice if not to buy any apps if there is any one apps that fits all, rather than to buy any that can cause failure to me. That apps is Dropbox so I trash it, and the comment is UNTRUSTED apps, I change my ID & password I really don't know if the future they will continue hacking so first, they got to me 99$. But the question is? If what will do next? That hackers is from the u.s. please bear with us. Thank you!

I use drop box, remote desktop and other things, the secret is to create complex passwords and also make passwords different for each login. so if you had a password on itunes say 1tUnes## do not use this anywhere else.
so you might have dr0pB0x/2 or w1bbL3*
make sure all passwords have numbers letters uppercase and strange characters that will make them more secure.
even more secure is non word selections like say r4Y9L1?e9##
your account security drops whenever you use the same password anywhere else.

Some questions and observations.

Every time I use the BTW tester it gives different results for download/ping and upload,none of which are accurate.
The quoted line below is what the so called futher diagnotics screem deplays at the bottom.
"If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance."
So...how do I contact the administrator of the BT Wholesale tester server.?
There does not appear to be any way that direct communication can be made to any department in this company,we should not have to visit or even be a member of a forum to contact departments,it should all be done by links that are known to all.
And while on the subject of forums,how do I close my member account on this forum,?,it lets you register,but where is the option to close forum membership accounts.it is missing.

Hi guys,
Apologies for the delay with this. That's everything closed off now.
Cheers
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Questions and problems with 7.2.1

I updated to 7.2.1 when it first came out. However, I have noticed that I've been loosing my connection frequently, about once every couple of days. (I was gone for a honeymoon most of the time however). I would be working fine, then all of a sudden, I'd loose connection to my disk, the web, and even to the router itself. Meaning, I'd go into airport utility and it cant find the router, even though I'm connected to it.
I downgraded back to 7.1.1 and all seems to be better.
Has anyone else noticed this with 7.2.1? I hope so, or else my router is failing...
ALSO, what does it mean by saying that 7.2.1 is "wifi 2.0 certified"? Are there any improvements in 7.2.1 that are not in 7.1.1? Thanks.
Ryan
Message was edited by: rpeters83

Ryan,
as to your 7.2.1 problem: MANY people had that same issue and did revert to
7.1.1 (I did the same after being unable to connect once I upgrade) So no
worries - your AEBS is fine as it is working with 7.1.1
For the second part, I am not a wifi guy, but check out the article on
http://www.bbwexchange.com/pubs/2006/09/20/page1397-228167.asp
maybe that will give you some idea about WiFi 2.0 and if you benefit from it!
Joerg

Some questions and suggestions concerning Zen Mi

Hello everybody!!
Firstly I'd like to say that I've already looked through all the knowledge base and web forum and unfortunately I haven't found out the answers for my doubts (sorry if there are these answers I couldn't find), so I'm here.
. Is there any way Zen Micro could display polish diacritic marks (from id tags)?(e.g. polish "l" with line/accent is never displayed, "z" with dot/accent is shown up as square)
2. You advise to plug AC adapter to Zen Micro first and then to the wall socket, so is it the same way I should do with usb cable? I mean, when I plug my ZM to the usb cable already connected to PC, it will be ok? So, is it any difference in usb connection order?
3. Is it possible to include in new firmware more sensiti've FM radio, at least change 00 kHz step to 50 kHz step? On the air where I li've there are a dozen or so radio stations and I could find only a few of them :-/ (yes, I have read "How to improve FM Radio reception" in the knowledge base )
4. Is it any possibility to reset the "play count" in Zen Micro? If no, maybe it will be in the new firmware? (it would be a great option)
5. What's about the "look up artist" function? I think it doesn't work properly. It should return all albums of this artist, not only currently played!
6. In the mp3 format (ID3 v2 tag) we can set our own genre name. Why doesn't Zen Micro show that?
Thanks for all answers! Regards form Poland!
p.s. sorry for my not very good english
/Greg

Area5 wrote:
... and I still have problems with polish marks (diacritic marks). :mansad: E.g. Media Source shows polish id tags correctly but when I transer them to the Zen Micro, it displays a rectangle instead of proper mark. :mansurprised: Is there any solution to this problem?
hi, sorry to disturb ya, but any ideas, solutions?
btw: after a few weeks of using the Zen Micro, I come to a conclusion that the "The Zen Micro Power Loss (Battery Drain) issue" is very bothersome problem . Creative, if you can, please fix it.
Regards from Poland
/Greg

Some questions & Performance probleme

Hello all,
I'm currently trying to make an application using berkeley DB.
But I came accross really Ugly performance (439 insert / sec) and I also try to switch to 'DB_QUEUE' but I've got a
'illegal record number size' when putting record into my db.
# time ./prog 10000
done in 22766.2 ms (439.248 updates/sec)
real 0m22.807s
user 0m0.320s
sys 0m0.580s
And when I call 'db->set_re_len(1024)' and change 'DB_TREE' to 'DB_QUEUE' (at line db->open),
I got this:
illegal record number size
terminate called after throwing an instance of 'DbException'
what(): Db::put: Invalid argument
Aborted (core dumped)
Could someone explain me what I'm doing wrong here ?
Thanks you very much for any help
Laurent
Here the program:
========================================================
#include <db_cxx.h>
#include <sys/time.h>
char buffer[1024];
#define get_timeval(timeval) gettimeofday(&(timeval), 0)
struct timeval start,end;
void
usage()
std::cerr << "You should give a number as ARG1 !\n";
exit(1);
int
main(int argc, char** argv)
if ( argc!=2 )
usage();
DbEnv* env;
Db* db;
DbSequence* seq;
Db* dbSeq;
Dbt seqKey;
Dbt key;
Dbt data;
env = new DbEnv(0);
env->set_flags( DB_AUTO_COMMIT , 1 );
env->set_flags( DB_TXN_WRITE_NOSYNC , 1 );
key.set_data( new db_seq_t );
key.set_size( sizeof(db_seq_t) );
data.set_data( new char[1024] );
data.set_size( 1024 );
u_int32_t flags = DB_CREATE
| DB_PRIVATE
| DB_INIT_LOCK
| DB_INIT_LOG
| DB_INIT_TXN
| DB_INIT_MPOOL;
env->open("/files/lauma/test/PONG",flags,0);
dbSeq = new Db(env,0);
dbSeq->open(0,"sequences.db",0,DB_BTREE,DB_CREATE,0640);
db = new Db( env , 0 );
db->set_pagesize(65536);
//db->set_re_len( 1024 );
db->open( 0 , "mytables.db" , NULL , DB_BTREE , DB_CREATE , 0640 );
seq = new DbSequence( dbSeq , 0 );
seqKey.set_data(const_cast<char*>("mytables.db"));
seqKey.set_size(strlen("mytables.db")+1);
seq->open(0 , &key , DB_CREATE );
int count = atoi(argv[1]);
get_timeval(start);
for(int i=0;i<count;++i)
if ( (i%1000) == 0 ) std::cout << i << " saves ...\n";
DbTxn* txn;
env->txn_begin(0,&txn,0);
db_seq_t dbid;
seq->get(txn,1,&dbid,0);
memmove( key.get_data() , &dbid , sizeof(db_seq_t) );
memmove( data.get_data() , buffer , 1024 );
db->put(txn,&key,&data,0);
txn->commit(0);
get_timeval(end);
double d = ((end.tv_sec*1000.0 + end.tv_usec/1000.0) - (start.tv_sec*1000.0 + start.tv_usec/1000.0));
std::cout << "done in " << d << " ms (" << (d?(count*1000.0/d):-1) << " updates/sec)" << std::endl;
seq->close(0);
dbSeq->close(0);
db->close(0);
env->close(0);
delete seq;
delete dbSeq;
delete db;
delete env;
}

Thanks for your answer.
But it's seems the probleme is elsewhere.
The probleme occurs when I use a 'db_seq_t' as the key value like in:
for( ... )
db_seq_t dbid = ... get sequence ...
Dbt key( &dbid , sizeof(db_seq_t) );
db->put(txn,&key,&data,0);
But if I do the following:
for( ... )
db_seq_t dbid = ... get sequence ...
char buffer[10];
sprintf( buffer , "%010lld" , dbid );
Dbt key( buffer , 10 );
db->put(txn,&key,&data,0);
The performance are ok !
Do you have any idea ??
Thank you very much
Laurent Marzullo
I paste the new code here:
=============================================
#include <db_cxx.h>
#include <sys/time.h>
char buffer[1024];
#define get_timeval(timeval) gettimeofday(&(timeval), 0)
struct timeval start,end;
void
usage()
std::cerr << "prog <count> <char | int>\n";
exit(1);
u_int32_t     pagesize = 32 * 1024;
u_int          bulkbufsize = 4 * 1024 * 1024;
u_int logbufsize = 8 * 1024 * 1024;
u_int cachesize = 32 * 1024 * 1024;
u_int          datasize = 255;
u_int          keysize = 8;
u_int numitems = 0;
int
main(int argc, char** argv)
if ( argc!=3 )
usage();
bool kchar = false;
if ( strcmp( argv[2] , "char" ) == 0 )
kchar = true;
else if ( strcmp( argv[2] , "int" ) == 0 )
kchar = false;
else
usage();
DbEnv* env;
Db* db;
DbSequence* seq;
Db* dbSeq;
Dbt seqKey;
Dbt keychar;
Dbt keyint;
Dbt data;
env = new DbEnv(0);
env->set_flags( DB_AUTO_COMMIT , 1 );
env->set_flags( DB_TXN_WRITE_NOSYNC , 1 );
env->set_lg_bsize( logbufsize );
env->log_set_config( DB_LOG_IN_MEMORY | DB_LOG_DSYNC , 0 );
keychar.set_flags( DB_DBT_USERMEM );
keyint.set_flags( DB_DBT_USERMEM );
data.set_flags( DB_DBT_USERMEM );
data.set_data( new char[datasize] );
data.set_size( datasize );
data.set_ulen( datasize );
u_int32_t flags = DB_CREATE
| DB_PRIVATE
| DB_INIT_LOCK
| DB_INIT_LOG
| DB_INIT_TXN
| DB_INIT_MPOOL;
//env->log_set_config( DB_LOG_IN_MEMORY , 1 );
//env->set_cache_max(0,8388608);
env->set_cachesize(1,8388608,1);
env->open("/files/lauma/test/PONG",flags,0);
dbSeq = new Db(env,0);
dbSeq->open(0,"sequences.db",0,DB_BTREE,DB_CREATE,0640);
db = new Db( env , 0 );
db->set_pagesize(65536);
//db->set_re_len( 1024 );
db->open( 0 , "mytables.db" , NULL , DB_BTREE , DB_CREATE , 0666 );
seq = new DbSequence( dbSeq , 0 );
seqKey.set_data(const_cast<char*>("mytables.db"));
seqKey.set_size(strlen("mytables.db")+1);
seq->open(0 , &seqKey , DB_CREATE );
int count = atoi(argv[1]);
get_timeval(start);
for(int i=0;i<count;++i)
if ( (i%1000) == 0 ) std::cout << i << " saves ...\n";
DbTxn* txn;
env->txn_begin(0,&txn,0);
db_seq_t dbid;
seq->get(txn,1,&dbid,0);
if ( kchar )
char buffer[10];
sprintf( buffer , "%010lld" , dbid );
keychar.set_data( buffer );
keychar.set_size( 10 );
keychar.set_ulen( 10 );
else
keyint.set_data(&dbid);
keyint.set_size(sizeof(db_seq_t));
keyint.set_ulen(sizeof(db_seq_t));
data.set_data( buffer );
data.set_size( datasize );
memset( buffer , 'A' , datasize );
buffer[1023] = '\0';
if ( kchar )
db->put(txn,&keychar,&data,0);
else
db->put(txn,&keyint,&data,0);
txn->commit(0);
get_timeval(end);
double d = ((end.tv_sec*1000.0 + end.tv_usec/1000.0) - (start.tv_sec*1000.0 + start.tv_usec/1000.0));
std::cout << "done in " << d << " ms (" << (d?(count*1000.0/d):-1) << " updates/sec)" << std::endl;
seq->close(0);
dbSeq->close(0);
db->close(0);
env->close(0);
delete seq;
delete dbSeq;
delete db;
delete env;
}

In regards to every PayPal question and problem. You will not be able to switch your billing preference to PayPal unless you do it on a COMPUTER. It will never work, EVER, on an iPad. I state this from personal experience. Apparently no one in Support kno

I found out the hard way that you have to be on a computer to change your payment preference to PayPal. Period. The option for PayPal does not even show up on an iPad. Apparently ITunes support does not know this or they would let everyone know. Go on your computer. Open account. Type in your password. Then click on edit payment type. Only on a computer do you have an option of choosing PayPal. I really hope this helps someone :)
Judi

Thank you! I put some self help hypnosis tracks to listen to on my iPod. I did not want to go to the next track automatically, I wanted to listen to them individually, one at a time. (If I fell asleep, I did not want to 'wake up' in the middle of a different track.) Your information helps me understand that I need to re-load this playlist onto my iPod from my Mac computer, only first, I need to UNCHECK the boxes in front of each track so the iPod will STOP each time after playing the selected track. It is too bad that so many functions are not availabvle within the iPod, but that is probably why they can make it so compact.

Some question and problems on FSB:Dram

Similar Messages

Maybe you are looking for