Some questions about importing HTML files

Hi, folks
Let's suppose we want to import a pack of HTML files formatted in HTML5 wit's it's CSS into a double-oriented folio. A couple or three questions about that, please:
1. Is there a limit for a reasonable quantity of HTML files I can import into a folio? I mean.. 100 would be way too much, for instance?
2. These HTML files could be navigated and referenced from inside TOC-pages made in InDesign,right? (navto://..., I gues?)
2. Will it be possible, by means of HTML adaptative design techniques, to treat both orientations (vertical and horizontal) as different viewports or screen sizes so that the design adapts for instance the column width with its CSS?
3. That said, will the InDesign final app. respect that adaptative CSS rules?
I am asking this because we are looking for a way to inject big quantities of content with a very similar design into our application in a really fast and automatizable way and I have the suspicion* that importing HTML5 preformated CSS files could be the a very good and simple alternative to importing XML into InDesign templates as we start out content as tagged almost-html files.
Thanks a lot
Gustavo Sánchez (Posting from Madrid)

I assume you are asking about using HTML articles.
1. There is no limit beyond simply keeping things reasonable.
2. Yes. Just use navto://articlename
3. Yes. I've used min-width of 768 and max width of 1024 to control it.
4. InDesign does not enter into any of this with the exception of using the folio builder panel. Everything else is done in Dreamweaver or whatever program you decide to use for the article.
If you want to restrict the HTML articles to one orientation or the other, use the _h and _v suffixes.
Bob

Similar Messages

Basic question about importing wma files

Hi, I have a basic question about importing wma files. I ripped some cd's on a Mindows computer using Media Player, but now want to copy them to my Mac and use them in iTunes on my Mac. when I use Import in iTunes, nothing happens and I cant even seem to copy them one by one using the Music folder.
Can someone help me?
thanks
eMac Mac OS X (10.4.4)

iTunes for Mac doesn't support .wma files.
If you can use a PC to convert them, you can use one of many freeware applications. Google for 'wma to mp3'.
For the Mac there's the shareware program EasyWMA that can convert them.
Hope this helps.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.3.9) Several ext. HD (backup and data)

Question about imported wmv files

hi all,
if i import a .wmv video into the library of my .fla file,
does the import convert the .wmv into a flash movie? in other
words, when someone views the .swf in their browser, is it played
by the flash player alone, or is windows media somehow involved in
its playback?
many thanks,
macron

no.. go here
http://www.webdesign.org/web/flash/tutorials/integrating-video-in-a-flash-movie.6436.html

Question About Importing Midi Files??

I find breaking down tempos and creating a tempo map easier for me in Pro Tools. So I did that on a file tonight, and just made a dummy midi file in PT so that I could import it into Logic and have a tempo map ready to go.
But now I see that Logic will only import tempo if you OPEN the midi file. But there's nothing in the midi file as I mentioned, it was just a dummy to give me a map.
Now it means creating all my track setups, VIs, everything, everytime I do this. Is there any way around this that I'm missing?
I just want my existing template to import a midi file's tempo created in another program ...
Thanks
Tom

Hi
OPEN the MIDI file, then select all the tempo events (either in the Global Track or in the Tempo List). Copy the tempo events.
Switch to your Logic template project, open the Tempo list then paste in the tempo map. You might need to delete the first (original) tempo event after pasting.
HTH
CCT

Some question about fade in // fade out by hideEffect and showEffect in Actionscript

Some question about fade in // fade out by hideEffect and
showEffect in Actionscript
Please kindly take a look at the following page:
http://camusmiu.no-ip.com/HounganQuestion/PictureHolderTest.html
(can view source)
I tried to make an image preloaded and scale the image to
it's preferred size.
When I came to consolidate the stuff into a component, I
found the application goes weird as I implementation the show/hide
effect.
The third trial which just hide and show the images directly,
instead of using viewstack, fail to bring the second image onto
screen.
It just used fadeOut instead of fadeIn(you see there is a
flash of the second image)
After some study of showEffect and hideEffect behaviour,
seems the mechanism of hide/show a component works in this way:
this._fadeIn:Fade = new Fade();
this._fadeIn.alphaFrom = 0;
this._fadeIn.alphaTo = 1;
this._fadeIn.duration = 1000;
this._fadeOut:Fade = new Fade();
this._fadeOut.alphaFrom = 1;
this._fadeOut.alphaTo = 0;
this._fadeOut.duration = 1000;
Component_A.visible = true;
Component_A.setStyle("showEffect", this._fadeIn);
Component_A.setStyle("hideEffect", this._fadeOut);
then when I set Component_A.visible = false, the sequence
works like following:
Component_A.visible = true
Component_A.visible = true, alpha = 100;
Component_A.visible = true, alpha = 50;
Component_A.visible = true, alpha = 0;
Component_A.visible = false;
The above sequence works visa versa as:
Component_A.visible = false;
Component_A.visible = true, alpha = 0;
Component_A.visible = true, alpha = 50;
Component_A.visible = true, alpha = 100;
Component_A.visible = true;
(Correct me if i am wrong)
========================================================================================== ====
From what I observe from the application, I have two
question.
1) When more than one component using the this._fadeIn,
this_fadeOut as the hide/show effects, the component in instance of
this._fadeIn? will it mess out if more than one component using the
fadeIn instance in the same time?
2) from the third component, i.e. PictureHolder3, when I load
other the picture , it fade out the new image instead of fading
in... Seems there is problem if I hide show too frequent. I think
when I hide then show right the way, the component only do the hide
part...
Can someone pls look into it and tell me what I did wrong?
Cuz in normal practice I don't think appropriate to use ViewStack
in Actionscript...

Hello Jack,
Currently, you can only import an swf file or you can embed videos from youtube, vimeo etc. into Muse / add HTML5 Video to Your Website.
Take a look at these simple videos that explain the currently available processes for adding videos in Muse, in a step by step method:
1. http://tv.adobe.com/watch/learn-adobe-muse-cc/inserting-a-youtube-flic kr-or-hulu-video/
2. http://www.youtube.com/watch?v=5in4swnIFsw
3. http://www.youtube.com/watch?v=KnBFLQheOk4
Hope this helps.
Cheers
Parikshit

Some question about georaster?

Hello,
I have some question about how to create high efficiency georaster model. I have 3T capacity raster data. It's bands is from 8 bands to 12 bands and the resolution is 0.5 meter. In order to ensure the original information of raster data, I consider not use the SDO_GEOR.mosaic, this means that a import file is a georaster object. I keep the original data capacity, not compression. I use JPEG-B to compress pyramid data.
Does anyone can tell me my georaster model is OK? or tell me some areas for improvement.
Thanks who have lool my page.

i don't have specific performance number on georaster using bigfile tablespaces. "A bigfile tablespace with 32K blocks can contain a 128 terabyte datafile" and should be doable with georaster in considering your data size is just 8 TB. It should have some advantages over small file tablespaces, for example, it would be easiler to manage because it has only one datafile. but note, "Bigfile tablespaces are intended to be used with Automatic Storage Management (ASM) or other logical volume managers that supports striping or RAID, and dynamically extensible logical volumes". "Using bigfile tablespaces on platforms that do not support large file sizes is not recommended and can limit tablespace capacity." please refer to the Oracle Database Administrator's Guide.
thanks

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

Some questions about building a plug in

Hello,
1.I'm trying to build a plug in ( for EM12c release 2 ) for my standalone java application - which exposes mbeans whom i want to collect some metrics with.
It's been a while since i started to build it - and I asked quite a lot of quesions about it - because the documnets supplied with the EDK and
the books ( ProgrammersGuide, ProgrammersReferece and the README file ) are not very clear to me ( I'm a newbie with EM in general .. )
So far some of the questions got answered and were very halpfull with this long process. BUT, there are some questions that nobody answered yet.
I'm quite "stuck" with it. I'm talking about the questions in : Re: A question about updating metadata files in plug in
I have a deadline for this plug in ( which is very close ..) so this the reason I post this new message.
I will appriciate any help about those questions .
2. Regarding the above, ( hoping to have an answered soon ..) I'm trying another way to buils this plug in:
In the README file there is this section( 3.6 : using MPCUI ) . I read the programmersReference ( chapter 8 ) and followed the instructions both in the README file and the ProgrammersReference .
For a begining, I just wanted to modify a small thing in the example supplied ( Demo Host System ) just to get started with something .
So i modify the file which contains the label ' Select member ... ' ( i don't remember the name of the file since the project is in my office , and I can't copy/paste ..- I think the the file icontians the name ' ConfirmationTarget .xml - it's one of the pages seen while adding a target ) .
I i changed it , i build the project ( using FlexBuilder) but did not use ANT as it's says in the README - the eclipse IDE build this file automatically
( HostSystem.swf in bin-debug dir as it says in the README ) . I copied this file to stage_dir/oms/metadata/mpcui .
i build a new plug in ( i incremented the version of it ) - no errors, everty thing was fine .I also copied this file to the oms server ( it wasn't there before )
and than run the commad ' emctl register oms ...' as it says in section 3.6 - and o got 'Success' eventually .
Now, when i opened the EM console , hoping to see tge change i made ( again , it's just a change of the title of the step while adding the target , and adding another menuitem to the 3 item that were alreay there ( CPU, FS, etc ) .
I believe wad i did is right- i mean changing in the right file and place ( there is no title like like this in any oter source file in the whole project )
but still, I didn't see any change! it seems execatly as it was befoer the change ..
Any idea?
Thanks.

Regarding your question #2. Please read my response here carefully as it covers a number of different issues.
1. Ant is not required to build the SWF file in your plug-in. It is an OPTION. Section 8.27 describes the different development options using either Ant or FlexBuilder.
2. You do NOT need to ever copy a SWF file to any location under the OMS runtime. You need to include it in the stage area and then either build an OPAR or use emctl to incrementally update the deployed plug-in. It has to either be deployed as part of the plug-in deployment or updated incrementally using emctl register oms metadata. Section 8.27.2.6 describes the specific steps to do this incremental update.
Steps to update the SWF associated with demo_hostsample. These are covered in the README and in chapter 8.
1. deploy the demo_hostsample plug-in as described in the README
2. create an instance of the Host Sample target type through manually discovery (Add Targets->Add Non-Host Target Specifying Properties)
3. using the demo_hostsample.zip project in Flex Builder, modify some part of the code, for example, modify the line containing label="Current Status" to label="My New Label"
4. rebuild the SWF, to be sure you can to a Clean build of the demo_hostsample project
5. ensure there is an updated copy of the HostSample.swf under demo_hostsample\mpcui\bin-debug (NOT bin-release, unless you Exported A Release Build)
6. copy that updated HostSample.swf file to the location on the OMS machine where you unzipped and built the OPAR for the demo_hostsample plug-in
7. cd to the stage/oms/metadata/mpcui directory and replace the current HostSample.swf with the one you just built (BE SURE ITS THE UPDATED FILE)
8. execute the command "emctl register oms metadata -sysman_pwd sysman -pluginId oracle.sysman.ohs -service mpcui -file demo_hostsample_uimd_swf.xml (BE SURE TO USE THE CORRECT sysman_pwd)
At this point you should be able to go to the homepage for the Host Sample target you created and see the changes.

Some question about communicating the usb RAW device

I have some question about USB communication: I want to make my VI communicate
TI-DSP by USB, now, the driver of USB on DSP have done, and there are a test
program writen by VC and a driver fold(with a .inf and a .sys files), when I
install the driver and run the test program, the driver program on DSP run
regularly. And then I want to program a VI which have the same function as the
test program, so I unload the driver on PC firstly, then install the DSP in
NI_VISA according to "Using NI-VISA 3_0 to Control Your USB Device - Tutorial -
Instrument Drivers". When I sent the standard control request using the VISA test panel, the status below happened. I don't know what wrong with my step.
Dev Phase Data                       Info           Time   Cmd.Phase.Ofs
15 CTL    80 06 03 00 - 00 00 04 00 GET DESCRIPTR 5.2sc        56.1.0
14 CTL    80 06 03 00 - 00 00 04 00 GET DESCRIPTR   11us        57.1.0
14 USTS   00 00 01 c0                canceled       2.0sc        57.2.0
15 USTS   00 00 01 c0                canceled         5us        56.2.0
PS: the software I use to capture the data is BUSHOUND
1、Do I have to install the .sys driver file in VISA? How can I install the driver file without losing the device in MAX?
2、Someone told me it must be done by calling .dll fies in LV, but I want to know if LV can program the function directly without calling .dll file?
Thank for any reply~~!

逍遥浪子 wrote:
I have some question about USB communication: I want to make my VI communicate TI-DSP by USB, now, the driver of USB on DSP have done, and there are a test program writen by VC and a driver fold(with a .inf and a .sys files), when I install the driver and run the test program, the driver program on DSP run regularly. And then I want to program a VI which have the same function as the test program, so I unload the driver on PC firstly, then install the DSP in NI_VISA according to "Using NI-VISA 3_0 to Control Your USB Device - Tutorial - Instrument
Drivers". When I sent the standard control request using the VISA test
panel, the status below happened. I don't know what wrong with my step. Dev
Phase
Data
Info
Time   Cmd.Phase.Ofs     ---
----- ------------------ 15
CTL    80 06 03 00 - 00 00 04 00 GET
DESCRIPTR 5.2sc
56.1.0        14
CTL    80 06 03 00 - 00 00 04 00 GET
DESCRIPTR   11us
57.1.0        14
USTS   00 00 01
c0
canceled
2.0sc
57.2.0        15
USTS   00 00 01
c0
canceled
5us        56.2.0 PS: the
software I use to capture the data is BUSHOUND 1、Do I have to install the .sys driver file in VISA? How can I install the driver file without losing the device in MAX? 2、
Someone told me it must be done by calling .dll fies in LV, but I want
to know if LV can program the function directly without calling .dll
file?
This thread
contains already a related answer and explains what a sys driver is.
While you could theoretically use the Call Library Node to call all the
necessary Win32 API kernel functions to connect to a device driver,
this would be very cumbersome and not doable without a real good
understanding about C programming. Writing an interface DLL instead
won't need more C programming knowledge at all but will give you a
clean interface to that device driver which eventually could be used in
other programming environments as well.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Some question about 9iAs R1.2.2 & R2, need your help:

Some question about 9iAs R1.2.2 & R2, need your help:
Since 2000, we has used 9iAS Core (R1.2.2) to publish our website. The platform is Suns Solaris (SPARC). The database is Oracle 8i. But there are so many questions:
1. The Web Cache cant be installed well
2. The web pages use JSP to query database with SQL show errors when we refresh the page a few times. The error will disappear after restarting the 9iAS or refreshing the page again. On the other hand, the same pages dont show error on resin. The error is java.sql.SQLException : Closed Connection: next. I supposed that the connection of database has some hidden troubles, but I can find it, could you give me some advice.
Now I have installed 9iAS R2, But when I visited the manage page, I found that a password is needed to visit the web cache manage page. I dont think I have set the password, and then I cant control the web cache. I want to know is a default password occurred? If not, what is the password.

The default password for Web Cache is: administrator
See walkthrough on the sample code page: http://otn.oracle.com/sample_code/products/ias/content.html
HTH,
Ashesh Parekh
Oracle9iAS product management

Some questions about 4s the answers which i can`t find at now.

Hi all! I seen the manual, but have some questions.
Important for me:
Fonts notes - change except three in the settings?
The dialing buttons with one touch? Except now - "Phone - buttons"
Is there a group of contacts? On the sim card, I do not keep contact.
Can i rate a song in a standard player?
Can you give the name of the best player for FLAC format?
Sync photos in Itunes, indicates one folder, and you can specify all that are nested inside? so?
How do I know whether the information is sent (hidden) or packages gprs without my permission? At now I turned off not needed for me apps.
Can I change the capital letters on the keyboard in the messages to the normal small?
"Reminder" of the event calendar. Options: No, at the time of the event, for 5, 15, 30, for 1 hour, 2 hour .... 1 day, 2 days. Wow!? And where is the option for 3-4-5 hours? If I need it.
Too conglomeration and confusing menu Itunes. Intricate synchronization. I can not understand where to get my photos from my phone to PC (Win7 x64).
The battery is not recommended to fully discharge, right? It is better to charge when it near 20% or it`s don`t care?
Not quite clear things:
The maximum volume of the music can really mess up a rumor, it's amazing, you can limit the maximum mode in the settings, check with the monitor Senheiser HD215.
Free Appstore often not free or demo, ask for a fee, why mislead people is not clear!
Thank for answers!

Lawrence Finch Thank you very much for answers!
1-2. I am really forgot about apps in store. ))
3. It is strange that there are no groups in the phone, it's still a phone in the first place ))
4. I meant in the iphone. )) On the computer I have many years using a different program for music.
5. Hmm... flac is not video format.
6-7. Ok
8. I am talking about standart letters on the keyboard in the messages. Visually, they look like big letters, that I first met in the phone. In small letters ordinary phone as long as you do not choose a large and they vary in height.
9-10. Ok
11. ???
The battery is not recommended to fully discharge, right? It is better to charge when it near 20% or it`s don`t care?
Not quite clear things:
12. I checked the maximum volume with my Senheiser HD215 and it`s a very very loud. What is strange that you can limit the maximum volume mode in the settings. This maximum volume limit seems to me strange.
13. Ok. But I was faced with a situation where there is an update itunes says, and as detailed a description of the program, but not a change in her. Strange.

Some question about Toshiab reocvery disk for Satellite P300-133

Hello guys ,
I got some questions about unpleasant recovery surprises :
*1)* I just made recovery DVD using Toshiba Recovery Disk Creator and it initially asked for 2 DVDs - but when the first one was done it didn`t require a second blanc DVD . Is it possible all system files of Windows Vista to be written on 1 DVD ?
*2)* Could I reinstall Windows Vista using the HDD Recovery option ( by pressing F8 ) without using recovery DVD ?
*3)* Which HDD partitions`ll be formatted ( just system C: or both C: and E: ) using HDD recovery ?
*4)* What is recovery DVD - Image of the hard drives or Vista installation files ?
Its pretty bad idea not to include OS on DVD when I have paid for it.
Thanks for all the problems to Toshiba :(

1. I think the recovery disk creator means 2 CDs. I have a Portege M700 with Windows Vista and one DVD too. I recovered it and after this I have a clean Vista installation with all drivers and tools from Toshiba. Nothing is missing.
2. Yes, you can reinstall Vista using the HDD Recovery option when you press F8 at startup. You dont need the recovery DVD but you should create one when your HDD get some errors or something else. If you need a new Recovery DVD, you have pay for one.
3. The complete HDD and partitions will be formatted, so backup your data first on a DVD, external HDD, USB stick or something else.
After the reinstallation you have the factory settings.
4. The recovery DVD is an image of the HDD about the factory settings. If you make a recovery, there are all drivers and tools already installed. Of course on the disk are the installations files of Vista, but you can only use this DVD on your Satellite P300. The disk can not be used on an other Satellite or on a PC.
When you have more questions, have a look in the user manual. There are a many in formations about the recovery. Its in chapter 3.

Some question about Cisco Prime Infrastructure

Dear all
I have some question about using Cisco prime Infrastructure:
- Can I show how many user access to one Access Point (AP) ?
- If I can. What is display information of user ? etc Ip address, MAC, username access, name of device (notebook, tablet, phone ..)
- How many time do Cisco Prime Infrastructure refesh user informantion .?
Please help me and send picture about it if you can.
Thank you so much.

Hi,
I don't have the Prime Infrastructure to post you image, but you can simply find all the answers you want on the config guide:
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/clientmgmt.html#wp1232242
1- You can surely find how many clients associated to a specific AP.
- Informaiton of the client usually includes username, SSID, ip address, mac address, RSSI, device vendor...etc. I don't think it contains the device type (ipad or iphone both appear as apple vendor. it does not destinguish between this and that.
3- The time of the refreshment is configurable. You need to configure the corresponding background task for the poll period. (this is also metnioned in the link above).
HTH
Amjad
Rating useful replies is more useful than saying "Thank you"

Few Questions About Backing Up Files

Okay, I'm pretty new to this, and have checked the support pages, but I do have some questions about backing up my files.
I'm running out of room on my computer's hard drive, and am wondering if burning the library to CDs will allow me to quickly restore my library on my computer when I sync my iPod.
I know that when an iPod syncs with a comp, it will lose any songs that aren't on the library list. (If I deleted some songs to free up room, I'd lose those songs on my iPod when I synced it up.) Is there a way to prevent that from happening? Some way to save a headache continuously restoring my iPod's library every time I want to add a new song or recharge it?
I'm on Windows XP, if that matters.

Best and easiest solution is to buy an external hard drive. Then simply drag and drop your iTunes folder from your internal onto the external and copy the entire library.
Patrick

Some questions about configuration in MAX.

Hello,everyone!
I have some questions about configuration in MAX(I am a jackaroo for motion control development),I hope I can get your help.
I use PCI-7344+UMI-7764+Servo amplifier+Servo motor,my MAX version is 4.2 and I use NI-Motion7.5
My question as following:
1,In Axis Configuration,for motor type,why I must select stepper but not servo?my motor is servo motor!If I select Servo,my motor can't run,I don't know why.
If I select stepper,though motor can work but I can't test encoder in MAX.
2,In Stepper settings,for stepper loop mode,why I must select open-loop but not close-loop?If I select close-loop,the servo motor doesn't work too.
3,If I want my two servo motors run at different velocity,How shoud I do?It seems I just can set the same velocity in MAX for my two servo motors.
My English is poor,Pls pardon me!I come from China.
Thank you for your help!
EnquanLi
Striving is without limit!

Hi,Jochen,
Thank you for your kindly help!
The manufacturer of the drive and motor that I am using now is Japan SANYO DENKI,drive type is RS1A01AA,motor type is R2AA06020FXP00.
And I use position control mode,thehe encoder's counts per revolution is 131072.I set the electronic gear ratio to 1:1 for drive.
Now,I can use Close-Loop to control the motor but still has some problems.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.The detail situation is as following
1,Motor can't run.
2, Or motor moves to a position, then moves in the same direction agian and eventually stops.
Except for the two points mentioned above,"Following Error" is occured frequently,I don't know why.
I am still not clear why I must set the motor type be stepper in MAX .
And I have another question:what the relationship between the steps and the counts?They have the proportion relations?I notice that there are a section said like this in help document: For proper closed-loop and p-command operation, steps per revolution/counts per revolution must be in the range of 1/32,767 < steps/counts < 32,767. An incorrect counts to steps ratio can result in failure to reach the target position and erroneous closed-loop stepper operation.
I am verry sorry I have too many questions!
I am very appreciate for your kingly help!Thanks again!
EnquanLi
China
Striving is without limit!

Some questions about importing HTML files

Similar Messages

Maybe you are looking for