Some questions about standard search help in WD4A

Hello all,
I use the SAP standard search help for a business partner number input field. It works fine, but I need to customize the result popup a bit. I have the following issues:
1. After the search I get a table with a list of all found business partners. The columns are not sortable. Can I change them to sortable (as in SAP GUI)?
2. How can I add another field/column to the result list (birth date)?
3. Per default 10 hits are shown on one page in this result table. Is it possible to show more hits at once?
Best regards and thanks for all help,
Matthias

Hi Matthias,
first of all let's say that the Search Help has been changed a lot in the different SP level.
Looking in a NW7.0 SP12 I can see that:
1. It's not possible
2. You have to change the Search Help definition in DDIC (/nSE11)
3. Via the Settings link in the TOP LEFT you can change the value (but in my system it is set to 500)
Keep in mind that WDA support a freely programmed Search Help where you can do everything you want...but it requires coding...
Sergio

Similar Messages

Hello , I want to ask some question about ipads \ How powerful is the iPad? How useful is it for reading books, newspaper or magazines or for surfing the web? Can you identify any shortcomings of the device? please help me :(

Hello ,
I want to ask some question about ipads \
How powerful is the iPad?
How useful is it for reading books, newspaper or magazines or for surfing the web?
Can you identify any shortcomings of the device?
please help me

it's less powerful than your average computer. THink of it like a netbook but with a better processor.
It'll do fine for surfing (although if you browse a lot of flash based sites you will need to get a third party browser since safari doesn't accommodate it)
You may do OK on reading books, papers or magazines, especially if they have apps, but the ipad's screen is backlit, so it doesn't work well outdoors and you may need to fiddle with the brightness so that you don't get eye strain (it's just like doing too much reading from a computer screen)
I would say the biggest short comings are data transfer. Apple's preferred work flow is that everything is done via iTunes or the internet....well people dont' always have 100% reliable always on internet access so you can find yourself in a situation where you can't get things on/off the iPad.
By and large, it's a good device for day to day stuff, but is not a computer replacement.

Some question about 9iAs R1.2.2 & R2, need your help:

Some question about 9iAs R1.2.2 & R2, need your help:
Since 2000, we has used 9iAS Core (R1.2.2) to publish our website. The platform is Suns Solaris (SPARC). The database is Oracle 8i. But there are so many questions:
1. The Web Cache cant be installed well
2. The web pages use JSP to query database with SQL show errors when we refresh the page a few times. The error will disappear after restarting the 9iAS or refreshing the page again. On the other hand, the same pages dont show error on resin. The error is java.sql.SQLException : Closed Connection: next. I supposed that the connection of database has some hidden troubles, but I can find it, could you give me some advice.
Now I have installed 9iAS R2, But when I visited the manage page, I found that a password is needed to visit the web cache manage page. I dont think I have set the password, and then I cant control the web cache. I want to know is a default password occurred? If not, what is the password.

The default password for Web Cache is: administrator
See walkthrough on the sample code page: http://otn.oracle.com/sample_code/products/ias/content.html
HTH,
Ashesh Parekh
Oracle9iAS product management

Calling a standard search help from MS Office

One of the companies I work for has integration with Microsoft Office so users can create SAP DMS (document management system for those who aren't familiar with it) entries directly from e.g. Microsoft Word. The integration solution is a custom .Net application.
In addition to the obvious integration to create the DMS info record and assign the document as an original the integration solution lets the user provide classification data. Some changes are now being planned, and one of them is challenging as a new characteristic (for the classification) will be used to store an organization unit. This is straightforward when the user is in the SAP GUI, as the standard search help can easily be displayed from custom code.
Being a technology optimist I was hoping that with the new fancy technologies SAP would have provided a way to use .NET integration to display a standard search help from the MS Office integration dialogue - but so far I have not been able to find any information supporting this hope. Luckily I am not the developer working with the integration dialogue, but unless the mentioned possibility exists it looks like we have to resort to passing all organization units to the interface so a hierarchy can be constructed and displayed to the user for selection.
Another alternative (I think) is to recreate the dialogue as a web dynpro screen, which will give us all the advantages of operating "inside" SAP. However, I am not sure if this is possible either. Can a web dynpro screen be called from an MS Office application (.Net), and can that web dynpro screen return values to the (external) calling application? In my simple view of the world this should be doable, if not otherwise it should at least be possibly by wrapping the screen in a function module that is exposed so the .Net application can call it - either by RFC or as a web service.
Microsoft Office version is 2003.
SAP release is ECC 6.0 (Netweaver 7.0).
I think this is the right forum for my question. My apologies if it isn't (and any guidance towards a more appropriate forum would then be appreciated).

Not solvable I suppose. There should be a way to close messages without marking them as answered.

Some questions about javacard 2.1.1 and smartcardio

Hello i have some question about java card 2.1.1 and the smartcardio package.
1.) I want to sign a message with the Signature.ALG_RSA_SHA_PKCS1 algorithm. I use the following code in the applet to sign the message:
final static byte P1_CREATION_MODE = (byte) 0x01;
final static byte INS_SIGN_MODE = (byte) 0x60;
final static byte SmartCard_CLA = (byte) 0xB0;
private void signMessage(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        byte byteRead = (byte) (apdu.setIncomingAndReceive());
        signature.init(privateKey, Signature.MODE_SIGN);
        short length = signature.sign(buffer, ISO7816.OFFSET_CDATA, byteRead, buffer, (short) 0);
        apdu.setOutgoingLength((short) length);
        apdu.sendBytesLong(buffer, (short) ISO7816.OFFSET_CDATA, (short) length);
        apdu.setOutgoing();
    }On the host side I use the following code to connect to the card and to send the sign apdu:
if (TerminalFactory.getDefault().terminals().list().size() == 0) {
            LOGGER.log(Level.SEVERE, "No reader present");
            throw new NoSuchCardReader();
        /* Select the first terminal*/
        CardTerminal terminal = TerminalFactory.getDefault().terminals().list().get(0);
        /* Is a card present? */
        if (!terminal.isCardPresent()) {
            LOGGER.log(Level.SEVERE, "No Card present!");
            throw new NoSuchCard();
        /* Set the card protocol */
     Card card = terminal.connect("*");
        ATR atr = card.getATR();
        LOGGER.fine(getHexString(atr.getBytes()));
        LOGGER.fine(getHexString(atr.getHistoricalBytes()));
        CardChannel channel = card.getBasicChannel();
        CommandAPDU cmd = new CommandAPDU((byte) 0xb0, (byte) 0x60, (byte) 0x01, (byte) 0x00, new String("datadatdatadata").getBytes(), (byte) 0x40);
     ResponseAPDU response = channel.transmit(cmd);
        card.disconnect(false);But this does not work and i got the following error
javax.smartcardio.CardException: sun.security.smartcardio.PCSCException: Unknown error 0x8010002f
        at sun.security.smartcardio.ChannelImpl.doTransmit(ChannelImpl.java:202)
        at sun.security.smartcardio.ChannelImpl.transmit(ChannelImpl.java:73)
        at de.upb.client.smartmeter.SmartMeter.initSmartCardApplet(SmartMeter.java:114)
        at de.upb.client.smartmeter.SmartMeterApplikation.main(SmartMeterApplikation.java:39)
Caused by: sun.security.smartcardio.PCSCException: Unknown error 0x8010002f
        at sun.security.smartcardio.PCSC.SCardTransmit(Native Method)
        at sun.security.smartcardio.ChannelImpl.doTransmit(ChannelImpl.java:171)
        ... 3 more2.) 3Des encryption
I want to use the 3Des algorithm to encrypt my data. I use
keyDES = (DESKey) KeyBuilder.buildKey(KeyBuilder.TYPE_DES,
                    KeyBuilder.LENGTH_DES3_2KEY, false);
cipherDES = Cipher.getInstance(Cipher.ALG_DES_CBC_ISO9797_M2, false);But i do not know what is the aquivalent on the host side??
3.) Another problem is that i am not able to send the modulus of a public key from the host applikation to the smard card
new CommandAPDU((byte) 0xb0, (byte) 0x20, (byte) 0x01, (byte) 0x00, modulus.toByteArray()); // create the apdu
// the method in the applet
private void setServerKeyMod(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        try {
            byte byteRead = (byte) (apdu.setIncomingAndReceive());
            short off = ISO7816.OFFSET_CDATA;
            // strip of any integer padding
            if (buffer[off] == 0) {
                off++;
                byteRead--;
            publicKeyServer.setModulus(buffer, off, byteRead);
        } catch (APDUException ex) {
            ISOException.throwIt((short) (SW_APDU_EXCEPTION + ex.getReason()));
    }The error code is 6700
4.) My last problem ist, that i am not able to use a value bigger than 0x7F as the ne field in the apducommand, because i get the following error
CommandAPDU((byte) 0xb0, (byte) 0x60, (byte) 0x01, (byte) 0x00, data, (byte) 0xff);
java.lang.IllegalArgumentException: ne must not be negative
        at javax.smartcardio.CommandAPDU.<init>(CommandAPDU.java:371)
        at javax.smartcardio.CommandAPDU.<init>(CommandAPDU.java:252)I thought that it this should be possible in order to use all the bytes of the response apdu.
If you need more code to help please let me know.
Cheers
Edited by: 858145 on 06.07.2011 08:23

2) What is PKCS? what is the difference between
PKCS#11 and PKCS#15??PKCS is the abbreviation of "Public-Key Cryptography Standards"
PKCS #11: Cryptographic Token Interface Standard
See http://www.rsasecurity.com/rsalabs/node.asp?id=2133
PKCS #15: Cryptographic Token Information Format Standard
http://www.rsasecurity.com/rsalabs/node.asp?id=2141
If you want to use yor smartcard as secure token it doesn't have to be a JavaCard.
BTW: I don't remember a way to access PKCS#15 tokens on a JavaCard from within an oncard JavaCard program. If you want to use keys in your oncard program, you have to transfer it onto the card or generate it oncard and export the public key by your own oncard/offcard code.
Jan

Some questions about configuration in MAX.

Hello,everyone!
I have some questions about configuration in MAX(I am a jackaroo for motion control development),I hope I can get your help.
I use PCI-7344+UMI-7764+Servo amplifier+Servo motor,my MAX version is 4.2 and I use NI-Motion7.5
My question as following:
1,In Axis Configuration,for motor type,why I must select stepper but not servo?my motor is servo motor!If I select Servo,my motor can't run,I don't know why.
If I select stepper,though motor can work but I can't test encoder in MAX.
2,In Stepper settings,for stepper loop mode,why I must select open-loop but not close-loop?If I select close-loop,the servo motor doesn't work too.
3,If I want my two servo motors run at different velocity,How shoud I do?It seems I just can set the same velocity in MAX for my two servo motors.
My English is poor,Pls pardon me!I come from China.
Thank you for your help!
EnquanLi
Striving is without limit!

Hi,Jochen,
Thank you for your kindly help!
The manufacturer of the drive and motor that I am using now is Japan SANYO DENKI,drive type is RS1A01AA,motor type is R2AA06020FXP00.
And I use position control mode,thehe encoder's counts per revolution is 131072.I set the electronic gear ratio to 1:1 for drive.
Now,I can use Close-Loop to control the motor but still has some problems.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.The detail situation is as following
1,Motor can't run.
2, Or motor moves to a position, then moves in the same direction agian and eventually stops.
Except for the two points mentioned above,"Following Error" is occured frequently,I don't know why.
I am still not clear why I must set the motor type be stepper in MAX .
And I have another question:what the relationship between the steps and the counts?They have the proportion relations?I notice that there are a section said like this in help document: For proper closed-loop and p-command operation, steps per revolution/counts per revolution must be in the range of 1/32,767 < steps/counts < 32,767. An incorrect counts to steps ratio can result in failure to reach the target position and erroneous closed-loop stepper operation.
I am verry sorry I have too many questions!
I am very appreciate for your kingly help!Thanks again!
EnquanLi
China
Striving is without limit!

Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?

Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?

Hello,
this topic is still a problem for me, does anybody have an idea.
Just to show what's my problem:
Collective Search help KRED does include a SAP append-search help ASH_KRED which holds the elementary search helps KREDC, KREDE, KREDM, KREDW.
The search helps KREDE, KREDM, KREDW should not be displayed, so I added another Serach-Help-Append ZKRED_CUST at the end of CSH KRED which holds these 3 SH's with the hidden flag.
That works, the SH's are not shown anymore.
I also added some other of the Original SAP SH's (e.g. KREDA) with the hidden flag and added changed copies of these (e.g ZKREDA) there to be shown instead.
All this can be done modification free by appends.
The folders of the elementary search helps are shown in the order as they are found included in the KRED SH and the append to this SH.
This means that the not hidden Sh KREDC from ASH_KRED is shown before all the "custimized" ZKREDx -SH's. But we need this SH not very often, so that I want it to displayed al the right-most position of the folders of SH's or at the most down postition of the drop-down-selection of SH's.
But I have not found any way to do this modification free.
The only way to archive this is to modify ASH_KRED by setting the Hidden-Flag for KREDC and add this SH at the end of append-SH ZKRED_CUST again.
But I want avoid this modification.
So, is there any way to do this without modifing any of the original SAP SH's ?
Helmut Fischer

Search Help - Restricting entries in standard search helps

Hi, is there any way to restrict entries in an SAP supplied search help? The search help in question is 'SSH_T007A', this search help also has a user exit 'F4_TAXCODE_USER_EXIT'. I'm not sure if the user exit is of any use or how to use it. Ideally what I need to do is to restrict the list of applicable tax codes to only those that we want our users to select. Does anyone have an idea of how to do this with a minimum of customization?
Thanks in advance,
Kevin May

Hi Seshatal,
     Thanks for the input, but this field does NOT have any ON VALUE REQUEST event associated with it ....
   as soon as F4 is hit, it goes to Function help_start ,so I don't think we can make any changes here as it is standard .
   I think including a standard search help will help....how to achieve this ?
Thanks,

Some question about fade in // fade out by hideEffect and showEffect in Actionscript

Some question about fade in // fade out by hideEffect and
showEffect in Actionscript
Please kindly take a look at the following page:
http://camusmiu.no-ip.com/HounganQuestion/PictureHolderTest.html
(can view source)
I tried to make an image preloaded and scale the image to
it's preferred size.
When I came to consolidate the stuff into a component, I
found the application goes weird as I implementation the show/hide
effect.
The third trial which just hide and show the images directly,
instead of using viewstack, fail to bring the second image onto
screen.
It just used fadeOut instead of fadeIn(you see there is a
flash of the second image)
After some study of showEffect and hideEffect behaviour,
seems the mechanism of hide/show a component works in this way:
this._fadeIn:Fade = new Fade();
this._fadeIn.alphaFrom = 0;
this._fadeIn.alphaTo = 1;
this._fadeIn.duration = 1000;
this._fadeOut:Fade = new Fade();
this._fadeOut.alphaFrom = 1;
this._fadeOut.alphaTo = 0;
this._fadeOut.duration = 1000;
Component_A.visible = true;
Component_A.setStyle("showEffect", this._fadeIn);
Component_A.setStyle("hideEffect", this._fadeOut);
then when I set Component_A.visible = false, the sequence
works like following:
Component_A.visible = true
Component_A.visible = true, alpha = 100;
Component_A.visible = true, alpha = 50;
Component_A.visible = true, alpha = 0;
Component_A.visible = false;
The above sequence works visa versa as:
Component_A.visible = false;
Component_A.visible = true, alpha = 0;
Component_A.visible = true, alpha = 50;
Component_A.visible = true, alpha = 100;
Component_A.visible = true;
(Correct me if i am wrong)
========================================================================================== ====
From what I observe from the application, I have two
question.
1) When more than one component using the this._fadeIn,
this_fadeOut as the hide/show effects, the component in instance of
this._fadeIn? will it mess out if more than one component using the
fadeIn instance in the same time?
2) from the third component, i.e. PictureHolder3, when I load
other the picture , it fade out the new image instead of fading
in... Seems there is problem if I hide show too frequent. I think
when I hide then show right the way, the component only do the hide
part...
Can someone pls look into it and tell me what I did wrong?
Cuz in normal practice I don't think appropriate to use ViewStack
in Actionscript...

Hello Jack,
Currently, you can only import an swf file or you can embed videos from youtube, vimeo etc. into Muse / add HTML5 Video to Your Website.
Take a look at these simple videos that explain the currently available processes for adding videos in Muse, in a step by step method:
1. http://tv.adobe.com/watch/learn-adobe-muse-cc/inserting-a-youtube-flic kr-or-hulu-video/
2. http://www.youtube.com/watch?v=5in4swnIFsw
3. http://www.youtube.com/watch?v=KnBFLQheOk4
Hope this helps.
Cheers
Parikshit

Some question about communicating the usb RAW device

I have some question about USB communication: I want to make my VI communicate
TI-DSP by USB, now, the driver of USB on DSP have done, and there are a test
program writen by VC and a driver fold(with a .inf and a .sys files), when I
install the driver and run the test program, the driver program on DSP run
regularly. And then I want to program a VI which have the same function as the
test program, so I unload the driver on PC firstly, then install the DSP in
NI_VISA according to "Using NI-VISA 3_0 to Control Your USB Device - Tutorial -
Instrument Drivers". When I sent the standard control request using the VISA test panel, the status below happened. I don't know what wrong with my step.
Dev Phase Data                       Info           Time   Cmd.Phase.Ofs
15 CTL    80 06 03 00 - 00 00 04 00 GET DESCRIPTR 5.2sc        56.1.0
14 CTL    80 06 03 00 - 00 00 04 00 GET DESCRIPTR   11us        57.1.0
14 USTS   00 00 01 c0                canceled       2.0sc        57.2.0
15 USTS   00 00 01 c0                canceled         5us        56.2.0
PS: the software I use to capture the data is BUSHOUND
1、Do I have to install the .sys driver file in VISA? How can I install the driver file without losing the device in MAX?
2、Someone told me it must be done by calling .dll fies in LV, but I want to know if LV can program the function directly without calling .dll file?
Thank for any reply~~!

逍遥浪子 wrote:
I have some question about USB communication: I want to make my VI communicate TI-DSP by USB, now, the driver of USB on DSP have done, and there are a test program writen by VC and a driver fold(with a .inf and a .sys files), when I install the driver and run the test program, the driver program on DSP run regularly. And then I want to program a VI which have the same function as the test program, so I unload the driver on PC firstly, then install the DSP in NI_VISA according to "Using NI-VISA 3_0 to Control Your USB Device - Tutorial - Instrument
Drivers". When I sent the standard control request using the VISA test
panel, the status below happened. I don't know what wrong with my step. Dev
Phase
Data
Info
Time   Cmd.Phase.Ofs     ---
----- ------------------ 15
CTL    80 06 03 00 - 00 00 04 00 GET
DESCRIPTR 5.2sc
56.1.0        14
CTL    80 06 03 00 - 00 00 04 00 GET
DESCRIPTR   11us
57.1.0        14
USTS   00 00 01
c0
canceled
2.0sc
57.2.0        15
USTS   00 00 01
c0
canceled
5us        56.2.0 PS: the
software I use to capture the data is BUSHOUND 1、Do I have to install the .sys driver file in VISA? How can I install the driver file without losing the device in MAX? 2、
Someone told me it must be done by calling .dll fies in LV, but I want
to know if LV can program the function directly without calling .dll
file?
This thread
contains already a related answer and explains what a sys driver is.
While you could theoretically use the Call Library Node to call all the
necessary Win32 API kernel functions to connect to a device driver,
this would be very cumbersome and not doable without a real good
understanding about C programming. Writing an interface DLL instead
won't need more C programming knowledge at all but will give you a
clean interface to that device driver which eventually could be used in
other programming environments as well.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Some question About title importer plugin

We are developing a title importer plugin for CS6, and have some question, hope forums could help me. Thank you very much.
1) Is there API to get title clip's in, out point in timeline ?
in imImageRec data structures, these is a in/out point, but it is trim in/out point, is not timeline in/out, how to get these point ?
2) Because we are also developing a subtitle importer for CS6, when user want to record the subtitle timecode, we hope we could control timeline play/stop, and get the playing/stopped callback, in same time, we could get the current playing position. But, it seems that these is no way to do this. I want to known, is there any plan to support these features in future ? Or, is there some work around methods to get these ?

I really appreciate your reply, I will look for VideoSegmentSuite to get the in/out point.
Q: Why we need timeline in/out of title clip ?
A: Our titler could do animation, when user strench title clip in timeline, clip's length will be changed, we hope we could scale animiation to fit the new length. ( I means animation will be slower or faster with new length), in imImporterImageRec, there is a in/out point and postion, but, we found they are not correct in sometimes, and SDK help PDF tell me there is a API bug in it, is it fixed or not ?
In another, in ImportImage API, we use (Rec->pos + Rec->in) / Rec->sampleSize to get real frame number for out title clip rendering when our title is imNoDurationNoDefault, we test it, it seems that it is right. But if our title is imNoDurationStillDefault, then Rec->pos and Rec->in and Rec->out are all based 90000+, and Rec->out was not right in some times (when we strench clip's outpoint in timeline), it is a bug or we missed something ? In this situation, we have to use (Rec->pos - Rec->in) / Rec->sampleSize to get the rendering frame number, it seems that it is right too. But, we could not use Rec->out, because it was wrong in sometimes.
New questions:
1) When we dragdrop our title files to timeline directly from windows explorer, Premiere will call imGetInfo8 (in here, we will allocate a private data for this clip), imOpenFile8, and there is no chance to call imGetPrefs8, so, when we close Premiere, imCloseFile will not be called for this clip, memory leaks for our private data. If we drag the title files to Premiere Bin firstly, then Premiere will call imGetPrefs8, imGetInfo8, imOpenFile8, there is no problem, imCloseFile will be called when we release this title clip.
So, my conclusion is: Premiere must call imGetPrefs8, else imCloseFile will not be called, I think it was a bug, isnot it?
2) We have a title template library (they are all based template title file), and, we use OLE dragdrop (COleDataSource->DoDragDrop), when we drag-drop these files to Premiere Bin/Timeline/SourceMonitor/TargetMonitor, there is a lots of memory leaks in oledobj2.cpp (microsoft source code files for COleDataSource), we are sure our code is correct, because if we dragdrop to our windows or other NLE (for example, EDIUS), there is not any problem. So, I guess, because we use MFC, and Premiere did not support it fully? Do you have see this problem before ? Do you have another suggestion to do these drag-drops ?
3) About to get sequence start timecode, we see a thread in forum which said there is new sdk headers, use them, we could get it through PrSDKSequenceInfoSuite. But its downloading link is broken, so, how to get new SDK headers? could you give me a new link to download ?
BTW, we are useing CS6 SDK Release2 + CS6, and will upgrade to 6.03 to test.
Thank you very much. and Sorry for these lots of questions, I am new guy in Premiere plug-ins developing.

Some question about Cisco Prime Infrastructure

Dear all
I have some question about using Cisco prime Infrastructure:
- Can I show how many user access to one Access Point (AP) ?
- If I can. What is display information of user ? etc Ip address, MAC, username access, name of device (notebook, tablet, phone ..)
- How many time do Cisco Prime Infrastructure refesh user informantion .?
Please help me and send picture about it if you can.
Thank you so much.

Hi,
I don't have the Prime Infrastructure to post you image, but you can simply find all the answers you want on the config guide:
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/clientmgmt.html#wp1232242
1- You can surely find how many clients associated to a specific AP.
- Informaiton of the client usually includes username, SSID, ip address, mac address, RSSI, device vendor...etc. I don't think it contains the device type (ipad or iphone both appear as apple vendor. it does not destinguish between this and that.
3- The time of the refreshment is configurable. You need to configure the corresponding background task for the poll period. (this is also metnioned in the link above).
HTH
Amjad
Rating useful replies is more useful than saying "Thank you"

Some Questions about NI-6602

Hello!!
I have some question about NI-6602.
1.What is the difference between Port and Line ?
What's the difference of Line nad Portin these functionIG_In_Line,DIG_Out_Prt,DIG_Line_Config,DIG_In_Prt,DIG_Out_Prt,DIG_Prt_Config
2.If I would like to apply gate to my counter application, is it possible that we give the gate signal via software?
Or I need to connect signal from hardware? If hardware is needed, is it possible to apply another counter's output as my counter's gate input?
3.Can we apply gate to this fuction ND_PULSE_TRAIN_GNR?
4.Can we detect the counter's source is High or Low ?Is there any fuction to read out the source status?

Hello,
Thank you for contacting National Instruments.
"1.What is the difference between Port and Line?"
A Port is a collection of lines. Usually 8 lines to a port.
"What's the difference of Line nad Portin these function DIG_In_Line, DIG_Out_Prt, DIG_Line_Config, DIG_In_Prt, DIG_Out_Prt, DIG_Prt_Config"
These functions either perform an output or input, or configure your digital ports and lines. Please see the Traditional NI-DAQ Function Reference Help found under Start >> All Programs >> National Instruments >> NI-DAQ >> Traditional NI-DAQ Function Reference Help for more information on these functions.
"2.If I would like to apply gate to my counter application, is it possible that we give the gate signal via software? Or I need to connect signal from hardware? If hardware is needed, is it possible to apply another counter's output as my counter's gate input?"
You can apply a gate signal from software. For example you can use the 6602's Timebase to gate your counter during pulse measurement applications. You can also route a counter's output to the gate of another counter internally. Look up Select_Signal in the Function Reference Help for more details.
"3.Can we apply gate to this function ND_PULSE_TRAIN_GNR?"
I am not sure what you are asking here. ND_PULSE_TRAIN_GNR is a parameter used in the GPCTR_Set_Application function to set up a counter for pulse generation. Please see the page titled "application = ND_PULSE_TRAIN_GNR: GPCTR_Set_Application" in the Function Reference Help more more information about this parameter.
"4.Can we detect the counter's source is High or Low ?Is there any fuction to read out the source status?"
There is no function to read the state of the source pin. You will need to route the source pin to a PFI line and perform a digital read on that line.
I hope this answers your questions. Please feel free to reply if you have any further questions.

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

Getting the value of a dynpro field in an exit for a standard search help.

Hallo Experts!
I need to modify the selected data displayed in standard sap search help: H_T357
What I've done is create an exit for the search help.
Then, when CALLCONTROL-STEP = 'DISP' I use the function module F4UT_PARAMETER_VALUE_GET and I get the value of the parameter 'WERKS' correctly. I think that this function module can only obtain values from the parameters of the search help. Well, here is the problem, I would like to get the values of dynpro fields
'ILOA-STORT' and 'VIQMEL-QMART' (warning type) in transaction IW21.
I prefer not to add these fields as parameters to the standard search help: H_T357.
Any ideas for getting the value of these fields? I've seen functions modules: F4UT_GET_ENVIRONMENT and F4UT_SH_SIC_GET_FIELDS. But I don't know if I can use them for my porpuses.
Thanks a lot in advance.

Hello again,
I have already solved the problem using function module 'DYNP_VALUES_READ'.
Thanks, David.

Some questions about standard search help in WD4A

Similar Messages

Maybe you are looking for