Some Questions in settings for Lenovo A6000

1) I just want to know how to activate anti theft pin , is ther any default pin nos to activate or if i should change the password then how to create a new Password.

Similar Messages

When will be the lollipop upgrade for Lenovo A6000+ ??

Hi ,Am using lenovo A6000+ mobile,i want to know exactly when there will be lollipop update for lenovo a6000+ ??
As you mentioned in OS upgrade matrix (On July) ,you supposed to give to lollipop by last month itsetlf but you didnt.
See after there update xxxx615 firmware ,my mobile battery draing fast and camera pic has loads of grains.I think that update you provided is not stable one,So Provide us some stable update to fix those above issues.
And Also Provide us lollipop update for Lenovo A6000+ ASAP.
orelse let us know when will be the lollipop update.We are waiting long for lollipop Update.
So tell us when will be the lollipop for Lenovo A6000+ ?? provide the update ASAP.Thanks,Kishore kumar

Hello Dr. Lamb,
thank you for your fast reply here.
Yes, the actual firmware from last year September
Is already installed. Also I am checking almost in every day the firmware update page since almost half a year.
I did contact the hotline support also several times for.
I was informed about that they will publish an update, but not when.
Also there was a statement from the Toshiba CEO already in last year that all UHD TVs with the Cevo engine
will get this update in last year.
Its a pity and seems a neverending story. I am totally disappointed.

Request for optimal calibration settings for Lenovo ThinkVision monitors

I understand one person's settings may not hold true for someone else's given display variances, but I would very much like to get anyone's suggested, optimal picture settings for each of the below two monitors.
Primarily monitor 1 looks way worse than monitor 2 for me, but I still want help with both. Models listed below. Please include each item/setting with # used so I can try them out and see if it helps.
Monitor 1: LEN L1900pA
Monitor 2: LEN LT1913pA
Thank you for your help!

Hi Jwhyrock,
Jwhyrock reply,
I played with settings on all 3 monitors. Not entirely sure I like what I did, but it is a bit better. I would still like to see what settings anyone else is using for their display such as contrast, brightness, color saturation etc.
Below is the link on how to setup the default calibration for display, please follow the steps. And also suggest you to check with resetting the Monitor to factory default setting in the monitor, or you can also check with installing Monitor .inf for the specific model which can be downloaded from the manufacturer link.
Display Calibration
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

One suggestion! for Lenovo A6000 Plus!

When i press the left sensor of my Lenovo A6000 Plus phone,the "desktop manager" is comes up which is not very useful. Is there any option to alter the setting to view "Recent App View" while pressing the left sensor?? It takes more time to hold that left sensor in order to get the "Recent App View" which is quite irritating as well as time taking!
So lenovo if this modification setting is not included with the phone itself then can you please add this option at your next software updates. Thnak you!

Unfortunately, there is no fix for this Flipkart denied to take this mobile back.The only hope is next lollipop update will fix it.. Sadly, another thing LENOVO removed many developer options. The transition scale, animation scale etc are not found

Settings for Lenovo Power Scheme

The dialog box is completely grayed out. I'm unable to change any settings. When running on D C or battery, the display goes dark after about 3 min.
Thanks
Solved!
Go to Solution.

Hello Agotthelf,
I'm running M.S. XP Home Edition ver. 2002 service pack 3.
I don't know which version of power manager I'm using, but I can tell you how I discovered the problem and how it was solved.
Start>Control Panel>Power Options>the Power Options Properties window opens. Settings for Home/Office Desk power scheme was grayed out, useless to me.
The problem was solved this way: Start>Control Panel>Add or Remove Programs>Energy Management>Change>Modify is high lighted by default>click Next>unchecked Energy Management.
When I returned to the Power Options Properties window, cited above, it was no longer grayed out. I was able to change the settings.
I own an Ipad S10 423135U.
Thanks for your reply and for the link to Forum Search Option.
If you will please, what's the meaning of R60 946...?
Corky

Some questions about features for a new iPod owner?

I really enjoy my iPod and have a few questions that I have not seen any posts about. Can I trouble some of you fine folks for some help? I want to list some features that I have no idea what they do. Can you either direct to some information or give me the hands on experience with the feature? Many thanks to anyone who can help in advance!
1. Shuffle - Songs and Album... does this work in all of the Music settings (i.e. Playlist, Artists, Albums, Compilations, etc.) even though I would assume that it would only work in Songs and Albums.
2. Repeat - One and All... does this work in all of the Music setting like listed above?
3. What are compilations?
4. What is Sound Check?
5. What is EQ and is there a breakdown for the settings of Treble, Mid, and Bass somewhere of these?
6. Can I view my albums via their covers to choose the Album (I am a visual person and find that easier to remember the CD)?

AFAIK the Sound Check doesn't affect battery life.
'Compilations' is a tag in iTunes, which, when marked, groups the album together by album, instaed of by artist.
Useful for, well, compilations, such as soundtracks, where there are a bunch of artists.
For example, the soundtrack for O Brother Where Art Thou has 19 songs, by about 15 artists. If I want to find all of them together, Instead of going to Artists>Norman Blake and finding only two songs, I go to Compilations>O Brother... and find the whole album.
While you can techincally go to 'Albums' for the same effect, it's nivce to group them together.
Also, if you do have a lot of compilations, you'll be happy to clear your Artist list of aritst with only one song.

Deploying Settings for Creative Suite Products - network environment with redirected folders

Hi there. We have some deployment questions regarding settings for the Adobe Master Collection. Because we have redirected folders for my docs, etc., they are located on our file server for all of our users (school environment). The problem is all Adobe programs default their save and caching locations to the my docs folder, which is on the server and causes slow downs and network traffic issues. Is there a way to set these with a file or a deployment option, or what options do we have?

This stuff is stored in the prefs of the programs and unless you go in and change each of the prefs files there is no way to change this.
Mylenium

Some questions about 4s the answers which i can`t find at now.

Hi all! I seen the manual, but have some questions.
Important for me:
Fonts notes - change except three in the settings?
The dialing buttons with one touch? Except now - "Phone - buttons"
Is there a group of contacts? On the sim card, I do not keep contact.
Can i rate a song in a standard player?
Can you give the name of the best player for FLAC format?
Sync photos in Itunes, indicates one folder, and you can specify all that are nested inside? so?
How do I know whether the information is sent (hidden) or packages gprs without my permission? At now I turned off not needed for me apps.
Can I change the capital letters on the keyboard in the messages to the normal small?
"Reminder" of the event calendar. Options: No, at the time of the event, for 5, 15, 30, for 1 hour, 2 hour .... 1 day, 2 days. Wow!? And where is the option for 3-4-5 hours? If I need it.
Too conglomeration and confusing menu Itunes. Intricate synchronization. I can not understand where to get my photos from my phone to PC (Win7 x64).
The battery is not recommended to fully discharge, right? It is better to charge when it near 20% or it`s don`t care?
Not quite clear things:
The maximum volume of the music can really mess up a rumor, it's amazing, you can limit the maximum mode in the settings, check with the monitor Senheiser HD215.
Free Appstore often not free or demo, ask for a fee, why mislead people is not clear!
Thank for answers!

Lawrence Finch Thank you very much for answers!
1-2. I am really forgot about apps in store. ))
3. It is strange that there are no groups in the phone, it's still a phone in the first place ))
4. I meant in the iphone. )) On the computer I have many years using a different program for music.
5. Hmm... flac is not video format.
6-7. Ok
8. I am talking about standart letters on the keyboard in the messages. Visually, they look like big letters, that I first met in the phone. In small letters ordinary phone as long as you do not choose a large and they vary in height.
9-10. Ok
11. ???
The battery is not recommended to fully discharge, right? It is better to charge when it near 20% or it`s don`t care?
Not quite clear things:
12. I checked the maximum volume with my Senheiser HD215 and it`s a very very loud. What is strange that you can limit the maximum volume mode in the settings. This maximum volume limit seems to me strange.
13. Ok. But I was faced with a situation where there is an update itunes says, and as detailed a description of the program, but not a change in her. Strange.

Best export settings for video for web

Can anyone give me some advice on the best export settings for a short video that is to be viewed on the web? I have some short, say 2 minute videos that need to be placed on a website and need a reasonable file size. What would the best Format and Preset options be in Premiere? Would it be helpful to utilize After Effects to reduce file size? Thank you in advance to anyone who has some advice!!

For now, it would be on my own website or a clients website. But there may
be another possibility, I have a client that already has some videos
available for viewing on their website, looks like they are YouTube videos
that play on their site, and there is an option to "Watch on YouTube". So I
guess I would love some recommended export settings for a straightforward
video clip on my website, and if I need to explore the YouTube preset in
Premiere, let me know. Thank you, I really appreciate your answers and
help!!

Some Question in ADF

Hi,
I have some questions in adf for which i do not know proper answers ... Can someone please let me know on the below mentioned questions
1. What are style sheets in adf ?
2. what is transaction handling in adf ?
3. what are adf declarative components ?
4. how to display radio button in af:query
5. what is discriminator and change indicator in EO ?
Thanks,

4.how to display radio button in af:queryNot possible .. see comments and thread reference @ Re: radio buttons in af:query
5. what is discriminator and change indicator in EO ?Discriminator is used to setup polymorphic EOs. Change Indicator in EO is used to compare the row in Entity Cache with one in DB to find out if it has changed.
http://mjabr.wordpress.com/2011/06/10/what-is-change-indicator-property/
http://mjabr.wordpress.com/2011/06/17/using-discriminator-columns/
3. what are adf declarative components ?
Quoting Frank - Declarative components allow developers to build a composite component out of existing ADF Faces components.
from https://blogs.oracle.com/jdevotnharvest/entry/about_jsf_fragments_adf_regions_declarative_components
Building them - http://www.oracle.com/technetwork/developer-tools/jdev/declarative-component-adf-084567.html
For other questions did you first try to go through the documentation or do a basic search ? ... these are pretty broad topics and you would need to do a bit of research on them your self.

Best export settings for DNxHD?

Hey guys,
I'm working with R3D files (4KHD) in CS6 and need to export them for grading/editing in DNxHD at 1080p. Any tips on the best export settings for this?
Also - is it necessary to downconvert the 4KHD in some way to 1080p before the export process? The files I'm ending up with are a noticeably poorer quality than the original; I'm not sure if this is due to an error I've made during the conversion or if its a natural part of using the codec?
Thanks if you can help!

For now, it would be on my own website or a clients website. But there may
be another possibility, I have a client that already has some videos
available for viewing on their website, looks like they are YouTube videos
that play on their site, and there is an option to "Watch on YouTube". So I
guess I would love some recommended export settings for a straightforward
video clip on my website, and if I need to explore the YouTube preset in
Premiere, let me know. Thank you, I really appreciate your answers and
help!!

Best export settings for Kiosk type presentation.

I have 24 slides that I would like to begin playing automatically and loop.
What is the best export settings in Quicktime.... manual? or would that require a click?
I have set all the transition in and out timings on each slide.
Thank you.

For now, it would be on my own website or a clients website. But there may
be another possibility, I have a client that already has some videos
available for viewing on their website, looks like they are YouTube videos
that play on their site, and there is an option to "Watch on YouTube". So I
guess I would love some recommended export settings for a straightforward
video clip on my website, and if I need to explore the YouTube preset in
Premiere, let me know. Thank you, I really appreciate your answers and
help!!

Default Bios Settings for RS480MS-IL2

Hi all
I am just wondering if there is some hidden key that loads some Default Bios Settings for this board? I know there is an Optimized Settings option, but i haven't seen a Default one.
I am using version bios version 3.8
Thanks.

have you tried a better psu
a 128 mb ram consumes around around 8 to 10 watts
http://www.blueowltechnologies.com/pmConsumption.asp
volts x amps =watts
3.3v feeds ram
so at most you have 46 watts on a good day

Shared Memory Settings for Oracle - Machine Spec Specific?

Hi,
I've been asked to apply some shared memory settings for Oracle on a new V210. The DBA has asked that we simply copy the settings from one system file to the new machine.
My problem is that I'm not entirely sure whether this is the best course of action. The machine the settings are taken from is a E280R with 2GB Memory and 2 x 900Mhz processors. The new V210 has 2GB and 2 x 1.33Ghz.
Surely the memory settings should be different? Don't worry, I've copied the relevant settings - not the whole system file!
Thanks for any advice,
John

Hi John,
Normally, When you want to apply the shm. We normally for production machines , consider 1/3rd of your physical memory. For eg. If you have 16gb of physical memory, I would consider around 4gb of shm_max.
Thanks,
Keshav .N

Some question about Toshiab reocvery disk for Satellite P300-133

Hello guys ,
I got some questions about unpleasant recovery surprises :
*1)* I just made recovery DVD using Toshiba Recovery Disk Creator and it initially asked for 2 DVDs - but when the first one was done it didn`t require a second blanc DVD . Is it possible all system files of Windows Vista to be written on 1 DVD ?
*2)* Could I reinstall Windows Vista using the HDD Recovery option ( by pressing F8 ) without using recovery DVD ?
*3)* Which HDD partitions`ll be formatted ( just system C: or both C: and E: ) using HDD recovery ?
*4)* What is recovery DVD - Image of the hard drives or Vista installation files ?
Its pretty bad idea not to include OS on DVD when I have paid for it.
Thanks for all the problems to Toshiba :(

1. I think the recovery disk creator means 2 CDs. I have a Portege M700 with Windows Vista and one DVD too. I recovered it and after this I have a clean Vista installation with all drivers and tools from Toshiba. Nothing is missing.
2. Yes, you can reinstall Vista using the HDD Recovery option when you press F8 at startup. You dont need the recovery DVD but you should create one when your HDD get some errors or something else. If you need a new Recovery DVD, you have pay for one.
3. The complete HDD and partitions will be formatted, so backup your data first on a DVD, external HDD, USB stick or something else.
After the reinstallation you have the factory settings.
4. The recovery DVD is an image of the HDD about the factory settings. If you make a recovery, there are all drivers and tools already installed. Of course on the disk are the installations files of Vista, but you can only use this DVD on your Satellite P300. The disk can not be used on an other Satellite or on a PC.
When you have more questions, have a look in the user manual. There are a many in formations about the recovery. Its in chapter 3.

Some Questions in settings for Lenovo A6000

Similar Messages

Maybe you are looking for