Some questions with install paths and reporting

I have some questions that i would like to ask
The first is regarding the installation path of the silverlight client when it is published,  where is it located, is there a way to customize your application so that the user can specify an install directory , or a way to update the web.config with
the install directory....
Second question is , in development I am able to create a report, with report viewer using the localhost address of the silverlight client  server side. but when i publish it, the address is no longer found. Is there another way I can go about doing
a report of the data in my sliverlight client application ? if so can i get some suggestions , I do know about some of the 3rd party extensions but none of them that I know of are free and I do not have the means right now to get them....
this is all for a 2- tier Desktop silverlight client application.
any help would be appreciated.
Thanks
David.

I wanted to know if i can TELL lightswitch application to install when im running it after it being publised . or where it is installed to after first run of the application.....
as far as Reporting goes and as far as I know DEVEXPRESS no longer supports lightswitch so there is no way for me to get ahold of the xtra reports extension ... please update your knowledge base and offer another solution..
HI David,
Thanks for your response.
From your description above, I think this issue is related to your deployment procedure, you can also customize your deployment path. For this issue, I'd like to suggest you to check it again, you can refer to this article. See:
Deploy a Two-tier LightSwitch Application
If you want to use report extension in lightswitch application, you can learn relevant topics about report extension in Lightswitch forum.
Hope it helps you.Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • Integrating CP5 Quiz questions with My Own and Reporting ONE SCORE

    Science teacher trying to convince my department to move toward paperless testing.
    Out of the Box, I find
    I've learnt how to use variables and Advanced Actions to create several true/false questions on a single slide and report their scores.
    Is it possible to have MYscore variables change the PROJECT score variable?
    eg EXPRESSION: "PROJECTSCORE" = v_MyQuestionScores + "PROJECTSCORES"
    Am I allowed to mess with the project variables?
    Regards
    Greg

    Normally you cannot change the score via any other method than using a quiz slide or an interactive object.
    But now you can use the Interactive Master widget from Infosemantics to take data from user variables and use these as slave objects to override the score assigned to the Master widget, which then gets reported to the quiz.
    If you want to try this out, download a free trial widget from here and give it a go.

  • I need some more interview question with answer on modeling,reporting.

    i need some more interview question with answer on modeling,reporting.

    Hi,
    You may find tons of topic about interview question. Please try to search forums before opening a post next time.Take a look at the link below.
    https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=bwinterviewquestions&adv=true&adv_sdn_all_sdn_author_name=
    Regards,
    ®

  • Why does Illustrator CS4 save pdfs with clipping paths and make rasters of gradient areas

    I am on a IMAC and upgraded to 10.6.8 Jan 2014. I am using CS4 Illustrator to create with. When i save my work as a pdf then reopen the pdf in Ill to make changes, the whole page has:
    A.) Multiple clipping paths around it
    B.) Most text has now become outlined. Not editable anymore.
    C.) Gradient areas have multiple clipping paths of the single gradient area
    D.) The gradient areas now become rasterized.
    This is very frustrating as now all of my marketing files, some 300+, are worthless. I don't know where to look anymore to find the problem.
    Please help.
    Thank you very much

    John,
    I have the presets as you have shown. I had been editing the supplied items as you suggested. Then figured i should ask the questions of those who are better than I.
    But still a bit confused as to why the new save places clipping paths around the document.
    Thank you John and Monika for your help.
    why does Illustrator CS4 save pdfs with clipping paths and make rasters of gradient areas
    created by John Mensinger in Illustrator - View the full discussion
    I do a save as "pdf" in the format pull down tab. I save to a folder on the hard drive. Where is the "Illustrator editability" check box? I presumed it is in Acrobat some where
    but i seem to be lost.
    It is in Illustrator's Save Adobe PDF dialog, which pops up before the saved file is written.
    https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6439399-644928/450-397/Untitl ed-1.jpg
    Sorry i didn't mention this, but this seems to have occurred when using images and text from provided pdfs.
    That's a critical fact. If you didn't do the original save, the above is moot, and it's too late to exercise any control over the save process. Someone else failed to save for editability. The only thing you can do is clean up/repair the content, (release clipping masks, rebuild rasterized elements, expand objects, etc.), and save correctly as AI. Then, if necessary, re-save as PDF with the correct settings.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6439399#6439399
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Illustrator by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Installing Forms and Reports 6i on Windows Me

    Has any one found a work around to install Forms and Reports 6i on Windows Me, I keep getting an error message. I already have Oracle 8i Personal Edition 8.1.5 installed and working on my machine.
    Thanks,
    Brent

    Hi Jan,
    I haven't tried to run Forms and Reports on Windows Server 2003, but I have worked on Windows XP and UNIX with F/R 6i 9i and 10g. I never had much luck with 9i Forms and Reports, 10g rel 1 was better, but 10g rel 2 is best. I recommend you bite the bullet and convert to 10g AS, Forms & Reports 10g rel 2. After running your 6i F/R to 10g through the converter, you may need to adjust fonts and colors.
    Regarding your specific question, I am surprised that the rwrun60 works at all with 9i AS. And rwrun90 probably won't run the 6i version of your reports without recompiling in the 9 version.
    Hope this helps,
    Frank

  • How to install forms and reports 6i

    I am facing a problem while installing Forms 6i. The following are the details.
    I successfully installed Oracle 9i first under F:\oracle\ora90. While installing Forms 6i, I selected the "Typical" and gave the path as "F:\oracle\ora90" and clicked on the Next Button. Immediately I got an error message as "The location specified, 'F:\oracle\ora90' is already used as an Oracle home for 'Oracle 82 Beta'. It cannot be used as an Oracle home for 'nt'".
    Could any one give the information of how to install forms and reports 6i. It ll be of great help to me.

    use F:\oracle\ora90 as your oracle-db-home
    use F:\oracle\forms6 as your forms-home
    try it
    Gerd

  • Is it possible to install Forms and Reports 11.1.1.2.0 without Weblogic

    is it possible to install Forms and Reports 11.1.1.2.0 without Web logic ?

    No. Not according to all the Oracle documents I have read on the subject.
    Frequently Asked Questions for Oracle Forms 11g
    http://www.oracle.com/technetwork/developer-tools/forms/documentation/faq-2-130064.pdf
    B32474-01
    E10421-01
    E10130-01
    E12003-01
    Best Regards
    mseberg

  • Can't install Forms and Report whith Redhart 7.2

    I use oracle 8.7.1. When I try to install Forms and Report
    I get this message UT60 is not available
    Why

    Absoulte life saver! Just got my new 15" mac book pro and the first thing I wanted to do was download the trial of the new cs5.5 suite. Nope couldnt do that. Had the exact same problem with the adobe download assistant. Turned graphic switching off and worked striaght away! Crazy. Took my Mac into the apple store today aswel and they couldnt figure it out! So hope this helps anyone else who has this problem. Thanks hpwooten! I am not happy with my mac again :-)

  • Install Forms and Reports 6i on 64 bits machine

    Hello,
    It is possible to install Forms and Reports 6i on 64 bits machine?
    How it is done?
    Thank you.
    Best Regards
    Rute

    Forms is a 32 bit application so you need to do what
    you normally do for the platform in question when you
    install and run in 32 bit emulation.Please, can you explain how to do it on the windows 2003 x64 machine?

  • Can't install Forms and Reports under linux 8.7.1

    I try to install Forms and Reports i get this message
    UT60 is not available or _TK60 is not available
    Please help me

    I solved my problem... more by a system of trial-n-error than anything else. Here's how you go about it:
    1. BACKUP ALL YOUR DATA. I would suggest using time machine thrice on three different locations. Better safe than sorry, and when it comes to backing up data, Overkill is Underrated.
    2. Boot into Disk Utility mode.
    3. Locate, select erase the primary HDD/SSD. WARNING: YOU WILL LOSE EVERYTHING ON YOUR COMPUTER THAT HAS NO BEEN BACKED UP.
    4. Install OS X online.
    5. Select your preferred backup location and tranfer all your data to the freshly installed system. This should restore your computer to an "as was" state.
    6. Once the computer is done restoring our data, restart the system.
    7. While restarting press the following key combination:
         cmd+option+P+R (You have press the combo before the grey screen appears during the boot and let go as soon as you hear the boot up chime.
       This will reset your computer's PRAM.
    8. Boot into your system and re-install xquartz (latest version) from the source site.
    I am not saying this process is fool proof. It worked for me, and it usually tends to work when you are facing problems due to a missing system file.

  • Install Forms and Reports builder 11g without WebLogic Server

    Hello Everybody,
    Presently to install Forms and Reports builder 11g on a PC for developers, we need to install WebLogic Server prior to that.
    For this, we need lot of resources. Hardware, to download big software bundles, memory resources, etc...
    If we have a solution like *"Forms and Reports builder 11g and its tools as stand-alone distribution from Fusion Middleware technologies"* ........ no words from me.
    Do you have a solution to install Forms and Reports Builder 11g without WebLogic Server?
    Regards
    murali krishna

    hi
    check out the following link.
    Forms/Reports 11g Builder without WebLogic
    sarah

  • Hi.I recorded some song with GarageBand app and I made that song my ringtone but I can't deleting that ringtone from my iPhone.How can I delete It?

    Hi.I recorded some song with GarageBand app and I made that song my ringtone but I can't deleting that ringtone from my iPhone.How can I delete It?

    Delete it from itunes. Connect your iphone to your pc. Then delete it. Then sync your phone to your pc. It will be deleted.

  • HT4060 I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual

    I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual. The other day, I had charged  my iPad overnight so that I could take it to university with me for the day, and when I had switched it on the next day the battery was on 5% and I had not used it since charge.

    Your battery may be dying. THey are only good for so many charges/discharges. If you have an apple store near by make an appointment and have them check itout

  • I copied my library to my new computer and I have some songs with greek characters and when I click them to play they change into something which is not readable. I have delete them and copy them again and also delete and re-download itunes

    I copied my library to my new computer and I have some songs with greek characters and when I click them to play they change into something which is not readable. I have delete them and copy them again and also delete and re-download itunes.

    im so happy I have a iTunes Card Code absolutely free! I got it at http://linkbitty.com/freeitunes2014

  • Hello I have a few questions and I need some help with my iTunes and  iPod

    Hello iTunes people.
    I have a little problem with my iTunes. I actually almost know nothing about iTunes really. But I have had a 80 gig ipod .. ummm I think it's a iPod classic maybe. A long time ago I just downloaded iTunes. I think one of my tech friends already had put the program onto my PC so I did not even have to download it. Anyways I put my life's collection of mp3's onto iTunes and then syncs it with my iPod and it worked great. Here is my problem. I just recently bought a MONSTER PC. I have lovingly named it " ED209 " I downloaded iTunes for it and I have the most up to date version.8.1.1 is the most current version correct? Ok well here is my problem. What I want to do is I want to put everything that is currently on my iPod ONTO the iTunes library. I DO NOT want to import anything from the library or playlist or whatever you call it ONTO the iPod because there is nothing in the library. Now this is were its gets weird and possibly silly. A person I was chatting with on Facebook sort of made fun of me because she was like " Dude! Just push " Sync " But the reason I am paranoid is because THIS is the message I get....
    " The iPod " Aaron's iPod " is synced with another iTunes library. Do you want to erase this ipod and sync with this iTunes library? "
    HOLY COW!! That girl on Facebook was making fun of me but READ THAT. That exactly says ERASE the "iPod" and Sync with THIS library " It does not say put what is ON the iPod into THIS Library. It says it the other way around. Clear as day it says it will ERASE the " Ipod " it does not say " Fill the library with whats on your iPod "
    Do I all of a sudden not understand English or something???? I know how to freaking read and from what it says is sounds a 100 percent like " we will ERASE youe iPod and put everything from this playist or library onto your iPiod" But there is NOTHING in my library? Am I mentally challenged or what?
    I hope someone can help me here and I have another request. Could someone just tell me all the cool things I can do with iTunes and my iPod? I am trying to read the help files and the FAQ and whatever else Apple provides you with but it has SO MUCH crap that looks usless. I find myself reading a whole paragraph about some simple little section of s section of a section of a feature! Know what I mean. Someone give me the long and short of the neat things I can do with this stuff. I have windows Vista with a wicked computer that has like 6 gigs of ram and m iPod is a 80 GB Classic
    help !!
    PROTEUS

    *What I want to do is I want to put everything that is currently on my iPod ONTO the iTunes library.*
    1). Connect your iPod to your computer. When you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod.
    2). When your iPod appears in the iTunes source list change the update setting to manual, that will let you continue to use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod and iPhone
    3). Once you are connected and your iPod is safely in manual mode there are a few things you can do to restore your iTunes from the iPod. iTunes will only let you copy your purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
    For everything else (music from CDs, other downloads and including iTunes purchases) there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. You can read reviews and comparisons of some of them here:
    Wired News - Rescue Your Stranded Tunes
    Comparison of iPod managers
    A selection of iPod to iTunes utilities:
    TuneJack Windows Only (iPhone and iPod Touch compatible)
    SharePod Windows Only (iPhone and iPod Touch compatible)
    iPod2PC Windows Only
    iDump Windows Only
    YamiPod Mac and Windows
    iPod Music Liberator Mac & Windows
    Floola Mac & Windows
    iPodRip Mac & Windows (iPhone and iPod Touch compatible)
    iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
    Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
    iGadget Mac & Windows (iPhone and iPod Touch compatible)
    iRepo Mac & Windows (iPhone and iPod Touch compatible)
    iPod Access Mac & Windows (iPhone and iPod Touch compatible)
    TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
    There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
    4). Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.
    5). I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay: Back up your iTunes library by copying to an external hard drive

Maybe you are looking for