Some qustions about iTouch

Hello friends!!
I would like to ask you some questions and will be glad if you will answer me!!
So like that:
1) are two itouches able to transfer between them via their bluetooth or wifi connections files like photos movies and any other files?
2) Is the internet explorer in the itouch able to process internet pages who contain javascript, PHP and ASP?
3) do the itouch support at bluetooth keyboard?
Waiting for your response!!
atar.

Hello atar,
1) are two itouches able to transfer between them via their bluetooth or wifi connections files like photos movies and any other files?
No. See this Apple support document for supported Bluetooth profiles.
http://support.apple.com/kb/ht3647
2) Is the internet explorer in the itouch able to process internet pages who contain javascript, PHP and ASP?
Yes.
3) do the itouch support at bluetooth keyboard?
Yes, but only specific models including the 32 and 64 GB third generation models running iOS4. Again see the above documented for more information.
B-rock

Similar Messages

Some questions about configuration in MAX.

Hello,everyone!
I have some questions about configuration in MAX(I am a jackaroo for motion control development),I hope I can get your help.
I use PCI-7344+UMI-7764+Servo amplifier+Servo motor,my MAX version is 4.2 and I use NI-Motion7.5
My question as following:
1,In Axis Configuration,for motor type,why I must select stepper but not servo?my motor is servo motor!If I select Servo,my motor can't run,I don't know why.
If I select stepper,though motor can work but I can't test encoder in MAX.
2,In Stepper settings,for stepper loop mode,why I must select open-loop but not close-loop?If I select close-loop,the servo motor doesn't work too.
3,If I want my two servo motors run at different velocity,How shoud I do?It seems I just can set the same velocity in MAX for my two servo motors.
My English is poor,Pls pardon me!I come from China.
Thank you for your help!
EnquanLi
Striving is without limit!

Hi,Jochen,
Thank you for your kindly help!
The manufacturer of the drive and motor that I am using now is Japan SANYO DENKI,drive type is RS1A01AA,motor type is R2AA06020FXP00.
And I use position control mode,thehe encoder's counts per revolution is 131072.I set the electronic gear ratio to 1:1 for drive.
Now,I can use Close-Loop to control the motor but still has some problems.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.The detail situation is as following
1,Motor can't run.
2, Or motor moves to a position, then moves in the same direction agian and eventually stops.
Except for the two points mentioned above,"Following Error" is occured frequently,I don't know why.
I am still not clear why I must set the motor type be stepper in MAX .
And I have another question:what the relationship between the steps and the counts?They have the proportion relations?I notice that there are a section said like this in help document: For proper closed-loop and p-command operation, steps per revolution/counts per revolution must be in the range of 1/32,767 < steps/counts < 32,767. An incorrect counts to steps ratio can result in failure to reach the target position and erroneous closed-loop stepper operation.
I am verry sorry I have too many questions!
I am very appreciate for your kingly help!Thanks again!
EnquanLi
China
Striving is without limit!

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

Can you give me some reasons about why I need to buy an iPod touch 5.Although I have the iPhone ,iPod nano, iPad ,MacBook pro,I think the iPod touch 5 is so attractive that I can't help buying it at once.If I have it,what I can do with it,can you tell me?

can you give me some reasons about why I need to buy an iPod touch 5.Although I have the iPhone ,iPod nano, iPad ,MacBook pro,I think the iPod touch 5 is so attractive that I can't help buying it at once.If I have it,what I can do with it,can you tell me?

All I can say is that I REALLY like my Touch 4th gen because I have all sorts of capabilities in a small form: e-mail, web browsing, news, weather, books, magazines, etc. etc. Plus lots and lots of apps out there, including so many free ones. I use the Cloud a lot so it's great to have everything sync'd to my MacBookPro (e-mail, Evernote, Pocket, etc.)
It would be easier, though, to do some of this, especially magazines, on the iPad mini, but, again, I love the small size of the Touch.
As for the 5th gen instead of the 4th, the fifth has Siri and the 3D feature in maps, which are great. And I'm sure it's a lot faster in iOS 6 than the 4th gen. And cool colors!
Don't know if this helps . . .

My ipod touch(4th gen) just recently had the iOS 5 update.bu for some reason about 80% of my music collection appears with no album artwork and doesnt play any songs.basically it has my music on their but wont let me access it? please help!

My ipod touch(4th gen) just recently had the iOS 5 update.bu for some reason about 80% of my music collection appears with no album artwork and doesnt play any songs.basically it has my music on their but wont let me access it? please help!

i have the same problem but i have ios 5.01. how do you unsync? please help, thanks

How can I contact or talk to some one about my bill

How can I contact or talk to some one about my billing, there are charges on my cc that I no nothing about can someone help me please.

Check your iTunes Store Purchase History (and that of any other AppleIDs which may have your CC linked... Partner / Child / Old AppleID accounts). Use iTunes Store & Mac App Store: Seeing your Purchase History and Order Numbers and a computer with iTunes installed (you can't see this info through the iTunes or App Store Apps on an iPad/iPhone/iPod Touch).
If the purchases are there in the Purchase History and you or a family member recognise them then it's up to you if you request a refund for accidental purchases via Email using http://www.apple.com/support/itunes/contact/ or accept the charges.
If however you find them but know it's not something you or someone else authorised to use the AppleID have bought, use the iForgot Website to reset your password, then go to the AppleID Website, sign in to Manage Your Apple ID then go to the Password and Security link on the left to change Security Questions then call AppleCare (0844 209 0611) to speak to iTunes Store Fraud as someone has hacked your AppleID. If you can find no record of the amounts which have come off the CC, call the Bank or Credit Card company and have them block the card and issue a new one as the details have been registered with another AppleID without your knowledge, THEN get in touch with AppleCare and speak to iTunes Store Fraud for a refund of the fraudulent purchases.

Hello , I want to ask some question about ipads \ How powerful is the iPad? How useful is it for reading books, newspaper or magazines or for surfing the web? Can you identify any shortcomings of the device? please help me :(

Hello ,
I want to ask some question about ipads \
How powerful is the iPad?
How useful is it for reading books, newspaper or magazines or for surfing the web?
Can you identify any shortcomings of the device?
please help me

it's less powerful than your average computer. THink of it like a netbook but with a better processor.
It'll do fine for surfing (although if you browse a lot of flash based sites you will need to get a third party browser since safari doesn't accommodate it)
You may do OK on reading books, papers or magazines, especially if they have apps, but the ipad's screen is backlit, so it doesn't work well outdoors and you may need to fiddle with the brightness so that you don't get eye strain (it's just like doing too much reading from a computer screen)
I would say the biggest short comings are data transfer. Apple's preferred work flow is that everything is done via iTunes or the internet....well people dont' always have 100% reliable always on internet access so you can find yourself in a situation where you can't get things on/off the iPad.
By and large, it's a good device for day to day stuff, but is not a computer replacement.

Need some info about getting started with the GE70 2PC Apache

Hi guys!
I'm about to getting the new GE70 2PC Apache gaming notebook from MSI and since I'm really putting alot of money in this I really wanna handle it gently :p So I got some questions about this, since It'll be the first time I'd but a gaming notebook.
1) 1st of all, what do I do when I've first started the laptop? Do I place in the CD and install all the newest drivers from that CD? Afterwards install an anti virus and then I should be good to go?
2) I heard the Haswell i7 processors from Intel produce a hell of a lot heat. When I turn on turbo fan and turbo boost and I reach temperatures of around 90°C, would it harm the hardware of my laptop? Could any damage take place? Or would my processor/graphic card have a shorter life expectancy?
3) The graphic card would be the GTX 850m. Now I'm wondering, is on this particular laptop -> (MSI-ge70-2pc-019be-apache-azerty), is the graphic card the DDR3 version or the GDDR5 version? Because I heard even the GTX 765m can outperform the 850m DDR3. But I also heard that the GDDR5 version of this graphic card is noticeably better than the 765M graphic card.
4)Is it wise to keep the processor going on turbo boost (3,4 Ghz) forever?
5) Will I have internet problems? I heard alot of people having internet problems with the killer lan drivers lately..
6) What laptop do you think I should pick in overall? The 2PC Apache version or the GE70 2OE version (the one without SSD) ?
8) My Brother has the GE70 2OE which has the 765m graphics card, but he only has around 60 fps when he's playing League Of Legends, and LoL isn't the most demanding game right.. The FPS sometimes even drops to 40 (even when he's ALONE with no one around him). It feels like his FPS is capped at 60? Because most of the time it's just 60. But when I look at the settings I saw the FPS is uncapped.. I believe with this graphics card he must atleast achieve a constant 70-80 fps on this game right? Might something be wrong in the settings of the graphics card?
7) Is there anything I should know before I start gaming on this laptop? (something I should do to have best performance or something..?)
Grtz

Well...
1. When you get the laptop, use MSI Burn Recovery and make the backup disks (I prefer DVD's myself...). This way if something happens, you can reinstall all the software like you just bought it.
2. Haswell does produce quite a bit of heat. As long as you don't get much higher than 90C you should be ok. If you're getting into the high 90's or even 100C range, you probably need to replace the heatsink compound. MSI has had a number of issues with that aspect on notebooks. It is easily done though.
3. The only way to really answer that question is probably to contact MSI about it. >>How to contact MSI.<<
4. Turbo boost isn't really user controlled. I wouldn't worry about it.
5. You might have issues. I'm honestly not too sure. I know most people haven't had issues recently, but that's all relative. The drivers seem to be working rather well right now to be honest.
6. Depends what you want and what is available. Maybe the GE70 20E + buy an SSD will be cheaper than just buying the Apache version. I don't really know, but you could always look into it.
8. The 765M is a decent card....but remember, it's NOT the same as a 760 on a desktop. It's roughly equivalent to a 750 in the desktop world. That's not a bad card by any means, but you aren't going to be able to get 60+ FPS at 1920x1080 in many games. LOL is rather demanding as a game though to be perfectly honest. (throwing my personal opinion in on this, I always buy the highest end item I can in this case, because you won't be able to get any better really in the end until the next laptop comes out).
7. I would setup all your games in the NVidia control panel to use the NVidia high performance graphics processor. That way there is no confusion and it will use the right video card.
You don't really need to update drivers UNLESS you're having an issue (like BSoD's or game freezes or something similar).
The MSI customer service in the EU really seems to be hit or miss. Some people seem to get good service, some people get really crappy service. I'm honestly not sure what the problem is over there. =/

Some questions about javacard 2.1.1 and smartcardio

Hello i have some question about java card 2.1.1 and the smartcardio package.
1.) I want to sign a message with the Signature.ALG_RSA_SHA_PKCS1 algorithm. I use the following code in the applet to sign the message:
final static byte P1_CREATION_MODE = (byte) 0x01;
final static byte INS_SIGN_MODE = (byte) 0x60;
final static byte SmartCard_CLA = (byte) 0xB0;
private void signMessage(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        byte byteRead = (byte) (apdu.setIncomingAndReceive());
        signature.init(privateKey, Signature.MODE_SIGN);
        short length = signature.sign(buffer, ISO7816.OFFSET_CDATA, byteRead, buffer, (short) 0);
        apdu.setOutgoingLength((short) length);
        apdu.sendBytesLong(buffer, (short) ISO7816.OFFSET_CDATA, (short) length);
        apdu.setOutgoing();
    }On the host side I use the following code to connect to the card and to send the sign apdu:
if (TerminalFactory.getDefault().terminals().list().size() == 0) {
            LOGGER.log(Level.SEVERE, "No reader present");
            throw new NoSuchCardReader();
        /* Select the first terminal*/
        CardTerminal terminal = TerminalFactory.getDefault().terminals().list().get(0);
        /* Is a card present? */
        if (!terminal.isCardPresent()) {
            LOGGER.log(Level.SEVERE, "No Card present!");
            throw new NoSuchCard();
        /* Set the card protocol */
     Card card = terminal.connect("*");
        ATR atr = card.getATR();
        LOGGER.fine(getHexString(atr.getBytes()));
        LOGGER.fine(getHexString(atr.getHistoricalBytes()));
        CardChannel channel = card.getBasicChannel();
        CommandAPDU cmd = new CommandAPDU((byte) 0xb0, (byte) 0x60, (byte) 0x01, (byte) 0x00, new String("datadatdatadata").getBytes(), (byte) 0x40);
     ResponseAPDU response = channel.transmit(cmd);
        card.disconnect(false);But this does not work and i got the following error
javax.smartcardio.CardException: sun.security.smartcardio.PCSCException: Unknown error 0x8010002f
        at sun.security.smartcardio.ChannelImpl.doTransmit(ChannelImpl.java:202)
        at sun.security.smartcardio.ChannelImpl.transmit(ChannelImpl.java:73)
        at de.upb.client.smartmeter.SmartMeter.initSmartCardApplet(SmartMeter.java:114)
        at de.upb.client.smartmeter.SmartMeterApplikation.main(SmartMeterApplikation.java:39)
Caused by: sun.security.smartcardio.PCSCException: Unknown error 0x8010002f
        at sun.security.smartcardio.PCSC.SCardTransmit(Native Method)
        at sun.security.smartcardio.ChannelImpl.doTransmit(ChannelImpl.java:171)
        ... 3 more2.) 3Des encryption
I want to use the 3Des algorithm to encrypt my data. I use
keyDES = (DESKey) KeyBuilder.buildKey(KeyBuilder.TYPE_DES,
                    KeyBuilder.LENGTH_DES3_2KEY, false);
cipherDES = Cipher.getInstance(Cipher.ALG_DES_CBC_ISO9797_M2, false);But i do not know what is the aquivalent on the host side??
3.) Another problem is that i am not able to send the modulus of a public key from the host applikation to the smard card
new CommandAPDU((byte) 0xb0, (byte) 0x20, (byte) 0x01, (byte) 0x00, modulus.toByteArray()); // create the apdu
// the method in the applet
private void setServerKeyMod(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        try {
            byte byteRead = (byte) (apdu.setIncomingAndReceive());
            short off = ISO7816.OFFSET_CDATA;
            // strip of any integer padding
            if (buffer[off] == 0) {
                off++;
                byteRead--;
            publicKeyServer.setModulus(buffer, off, byteRead);
        } catch (APDUException ex) {
            ISOException.throwIt((short) (SW_APDU_EXCEPTION + ex.getReason()));
    }The error code is 6700
4.) My last problem ist, that i am not able to use a value bigger than 0x7F as the ne field in the apducommand, because i get the following error
CommandAPDU((byte) 0xb0, (byte) 0x60, (byte) 0x01, (byte) 0x00, data, (byte) 0xff);
java.lang.IllegalArgumentException: ne must not be negative
        at javax.smartcardio.CommandAPDU.<init>(CommandAPDU.java:371)
        at javax.smartcardio.CommandAPDU.<init>(CommandAPDU.java:252)I thought that it this should be possible in order to use all the bytes of the response apdu.
If you need more code to help please let me know.
Cheers
Edited by: 858145 on 06.07.2011 08:23

2) What is PKCS? what is the difference between
PKCS#11 and PKCS#15??PKCS is the abbreviation of "Public-Key Cryptography Standards"
PKCS #11: Cryptographic Token Interface Standard
See http://www.rsasecurity.com/rsalabs/node.asp?id=2133
PKCS #15: Cryptographic Token Information Format Standard
http://www.rsasecurity.com/rsalabs/node.asp?id=2141
If you want to use yor smartcard as secure token it doesn't have to be a JavaCard.
BTW: I don't remember a way to access PKCS#15 tokens on a JavaCard from within an oncard JavaCard program. If you want to use keys in your oncard program, you have to transfer it onto the card or generate it oncard and export the public key by your own oncard/offcard code.
Jan

Some information about SUN IDM

Hi,
I am new in IDM and want to know some thing about it.
1. Is it free software to impliment in any organigation.
2. From where i can down load it.
Thanks......

its listed in the JAVA enterprise software... under identity management.
go to downloads... & you can download them....
for info to work on... theres a long way ahead of you SIR.....
Docs, forums... etc would be the best source for more info...

Some information about http time out

hi 2 all,
I want some information about http time out,like what all different transactions are used.

Hi,
Could you be more specific? Here is a blog about timeouts:
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
/wg

Some question about fade in // fade out by hideEffect and showEffect in Actionscript

Some question about fade in // fade out by hideEffect and
showEffect in Actionscript
Please kindly take a look at the following page:
http://camusmiu.no-ip.com/HounganQuestion/PictureHolderTest.html
(can view source)
I tried to make an image preloaded and scale the image to
it's preferred size.
When I came to consolidate the stuff into a component, I
found the application goes weird as I implementation the show/hide
effect.
The third trial which just hide and show the images directly,
instead of using viewstack, fail to bring the second image onto
screen.
It just used fadeOut instead of fadeIn(you see there is a
flash of the second image)
After some study of showEffect and hideEffect behaviour,
seems the mechanism of hide/show a component works in this way:
this._fadeIn:Fade = new Fade();
this._fadeIn.alphaFrom = 0;
this._fadeIn.alphaTo = 1;
this._fadeIn.duration = 1000;
this._fadeOut:Fade = new Fade();
this._fadeOut.alphaFrom = 1;
this._fadeOut.alphaTo = 0;
this._fadeOut.duration = 1000;
Component_A.visible = true;
Component_A.setStyle("showEffect", this._fadeIn);
Component_A.setStyle("hideEffect", this._fadeOut);
then when I set Component_A.visible = false, the sequence
works like following:
Component_A.visible = true
Component_A.visible = true, alpha = 100;
Component_A.visible = true, alpha = 50;
Component_A.visible = true, alpha = 0;
Component_A.visible = false;
The above sequence works visa versa as:
Component_A.visible = false;
Component_A.visible = true, alpha = 0;
Component_A.visible = true, alpha = 50;
Component_A.visible = true, alpha = 100;
Component_A.visible = true;
(Correct me if i am wrong)
========================================================================================== ====
From what I observe from the application, I have two
question.
1) When more than one component using the this._fadeIn,
this_fadeOut as the hide/show effects, the component in instance of
this._fadeIn? will it mess out if more than one component using the
fadeIn instance in the same time?
2) from the third component, i.e. PictureHolder3, when I load
other the picture , it fade out the new image instead of fading
in... Seems there is problem if I hide show too frequent. I think
when I hide then show right the way, the component only do the hide
part...
Can someone pls look into it and tell me what I did wrong?
Cuz in normal practice I don't think appropriate to use ViewStack
in Actionscript...

Hello Jack,
Currently, you can only import an swf file or you can embed videos from youtube, vimeo etc. into Muse / add HTML5 Video to Your Website.
Take a look at these simple videos that explain the currently available processes for adding videos in Muse, in a step by step method:
1. http://tv.adobe.com/watch/learn-adobe-muse-cc/inserting-a-youtube-flic kr-or-hulu-video/
2. http://www.youtube.com/watch?v=5in4swnIFsw
3. http://www.youtube.com/watch?v=KnBFLQheOk4
Hope this helps.
Cheers
Parikshit

I need some advice about the macbook pro and iPhone 5. I took a video on my iPhone and tried to email it it said it was too big to send? So i downloaded it to my macbook pro and tried to mail it to no avail? The macbook tells me the server won't let it th

I need some advice about the macbook pro and iPhone 5.
I took a video on my iPhone and tried to email it it said it was too big to send? So i downloaded it to my macbook pro and tried to mail it to no avail? The macbook tells me the server won't let it through other mail goes through any ideas how to resize it or what it might take to send it?

I agree with LowLister, the best option for you to share the video online is to upload it to your online storage account for example : Box, Dropbox, SkyDrive (All of them provide free storage beginning from 2GB).
You can upload the files which you want to share in this online storage and then they have sharing options in which you'll will get the link of the file to be sent and send the email. You're good to go!
Tip : You can store multiple files for backup purposes.

Some question about communicating the usb RAW device

I have some question about USB communication: I want to make my VI communicate
TI-DSP by USB, now, the driver of USB on DSP have done, and there are a test
program writen by VC and a driver fold(with a .inf and a .sys files), when I
install the driver and run the test program, the driver program on DSP run
regularly. And then I want to program a VI which have the same function as the
test program, so I unload the driver on PC firstly, then install the DSP in
NI_VISA according to "Using NI-VISA 3_0 to Control Your USB Device - Tutorial -
Instrument Drivers". When I sent the standard control request using the VISA test panel, the status below happened. I don't know what wrong with my step.
Dev Phase Data                       Info           Time   Cmd.Phase.Ofs
15 CTL    80 06 03 00 - 00 00 04 00 GET DESCRIPTR 5.2sc        56.1.0
14 CTL    80 06 03 00 - 00 00 04 00 GET DESCRIPTR   11us        57.1.0
14 USTS   00 00 01 c0                canceled       2.0sc        57.2.0
15 USTS   00 00 01 c0                canceled         5us        56.2.0
PS: the software I use to capture the data is BUSHOUND
1、Do I have to install the .sys driver file in VISA? How can I install the driver file without losing the device in MAX?
2、Someone told me it must be done by calling .dll fies in LV, but I want to know if LV can program the function directly without calling .dll file?
Thank for any reply~~!

逍遥浪子 wrote:
I have some question about USB communication: I want to make my VI communicate TI-DSP by USB, now, the driver of USB on DSP have done, and there are a test program writen by VC and a driver fold(with a .inf and a .sys files), when I install the driver and run the test program, the driver program on DSP run regularly. And then I want to program a VI which have the same function as the test program, so I unload the driver on PC firstly, then install the DSP in NI_VISA according to "Using NI-VISA 3_0 to Control Your USB Device - Tutorial - Instrument
Drivers". When I sent the standard control request using the VISA test
panel, the status below happened. I don't know what wrong with my step. Dev
Phase
Data
Info
Time   Cmd.Phase.Ofs     ---
----- ------------------ 15
CTL    80 06 03 00 - 00 00 04 00 GET
DESCRIPTR 5.2sc
56.1.0        14
CTL    80 06 03 00 - 00 00 04 00 GET
DESCRIPTR   11us
57.1.0        14
USTS   00 00 01
c0
canceled
2.0sc
57.2.0        15
USTS   00 00 01
c0
canceled
5us        56.2.0 PS: the
software I use to capture the data is BUSHOUND 1、Do I have to install the .sys driver file in VISA? How can I install the driver file without losing the device in MAX? 2、
Someone told me it must be done by calling .dll fies in LV, but I want
to know if LV can program the function directly without calling .dll
file?
This thread
contains already a related answer and explains what a sys driver is.
While you could theoretically use the Call Library Node to call all the
necessary Win32 API kernel functions to connect to a device driver,
this would be very cumbersome and not doable without a real good
understanding about C programming. Writing an interface DLL instead
won't need more C programming knowledge at all but will give you a
clean interface to that device driver which eventually could be used in
other programming environments as well.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Provide some suggestion about items max volumn

Hi experts
I would like to know the max items number for B1.
My customer have about 20,000 items, and every item have about 35 WH.
Is this volumn OK for B1?
could you provide some suggestion about items max volumn?
Glen

Hi,
there is a MS. Excel file whose file name is database size estimator. The file is used to calculate the database size, growth per year and also it is useful to use before buy server and its component, I mean before installation.
I use the file before implementing SAP B1 in a certain company that have 150,000 items and 30 whses. It is okay until present and the database still run smooth
Rgds,

Some qustions about iTouch

Similar Messages

Maybe you are looking for