Some records not transfer from ODS to infocube

Hello BW folks ,
We have an ODS which stores the various sales doc. types.
We are transfering all the data from this ODS to infocube. We do not have any routine or filter conditions while loading data from ODS to infocube.
In the update rules of infocube we do not have any routine written .
Also no start routine is present in Infocube.
The data is loaded successfully from ODS to infocube.
But still a particular 'sales doc type' is not transfer from ODS to infocube.
While this 'sales doc type' is present in ODS.
The Sales doc type is maintained with respect to the Ordernumber. So If I check the Ordernumber of that sales doc type in ODS then the same Order Number is not present in infocube.
Means some / few Ordernumbers also getting deleted while transfering data from ODS to infocube.
We do not have any object in update rules as master data attribute of.
Please suggest me what to do in this case.
Amol.

hello VC,
I have checked that in ODS update rules , for key figures we have update type as Addition and the data from ODS to infocube is INIT and then delta.
Is this the reason for Overwritting the particular sales doc type ?
I thing we should do full upload only from ODS to infocube in this case.
Regards,
Amol.

Similar Messages

Data transfer from ODS to InfoCube

How to transfer data from ODS to InfoCube ? Where exactly do I have to create the
Infopackage or is it auto-generated ?

Hi,
If you are using BI 7.0 then do the following:
Create Transformation from ODS to Cube by right clicking on cube.
then create DTP in cube and execute it.
No need to create infopackage again.
regards,
Pruthvi R

I just bought a new Mac and I want to transfer some data (not all) from my old Mac. Basically, I want to move my itunes library, iphoto library, and a few documents. I have not even turned on my new Mac yet. Is the best way by an external hard drive?

I just bought a new Mac and I want to transfer some data (not all) from my old Mac. Basically, I want to move my itunes library, iphoto library, and a few documents. I have not even turned on my new Mac yet. Is the best way by an external hard drive?

If both have Firewire ports then you can accomplish your goal by using Target Disk Mode. If this is not possible then you can do using an external drive or if you have a local network connect both to your network and use filesharing between the two computers.
File Sharing on Macs
Mac 101- File Sharing

Load from ODS into InfoCube gives TIME-OUT runtime error after 10 minutes ?

Hi all,
 We have a full load from ODS into InfoCube and it was working fine till the last week upto with 50,000 records. Now, we have around 70,000+ records and started failing with TIME_OUT runtime error.
 The following is from the Short Dump (ST22):
 The system profile "rdisp/max_wprun_time" contains the maximum runtime of a
program. The current setting is 600 seconds. Once this time limit has been exceeded, the system tries to terminate any SQL statements that are currently being executed and tells the ABAP processor to terminate the current program.
The following are from ROIDOCPRMS table:
 MAXSIZE (in KB) : 20,000
 Frequency : 10
 Max Processes : 3
When I check the Data Packages under 'Details' tab in Monitor, there are four Data Packages and the first three are with 24,450 records. I will right click on each Data Package and select 'Manual Update' to load from PSA. When this Manual Update takes more than 10 minutes it is failing with TIME_OUT again.
How could I fix this problem, PLEASE ??
Thanks,
Venkat.

Hello A.H.P,
The following is the Start Routine:
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BIC/AZCPR_O0400, /BIC/AZCPR_O0100, /BIC/AZCPR_O0200.
DATA: material(18), plant(4).
DATA: role_assignment like /BIC/AZCPR_O0100-CPR_ROLE, resource like
/BIC/AZCPR_O0200-CPR_BPARTN.
$$ end of global - insert your declaration only before this line -
The follow definition is new in the BW3.x
TYPES:
BEGIN OF DATA_PACKAGE_STRUCTURE.
 INCLUDE STRUCTURE /BIC/CS8ZCPR_O03.
TYPES:
 RECNO LIKE sy-tabix,
END OF DATA_PACKAGE_STRUCTURE.
DATA:
DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
 WITH HEADER LINE
 WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
FORM startup
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
 MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
 DATA_PACKAGE STRUCTURE DATA_PACKAGE
USING RECORD_ALL LIKE SY-TABIX
 SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
 clear DATA_PACKAGE.
 loop at DATA_PACKAGE.
 select single /BIC/ZMATERIAL PLANT
 into (material, plant)
 from /BIC/AZCPR_O0400
 where CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID
 and ( MATL_TYPE = 'ZKIT' OR MATL_TYPE = 'ZSVK' ).
 if sy-subrc = 0.
 DATA_PACKAGE-/BIC/ZMATERIAL = material.
 DATA_PACKAGE-plant = plant.
 modify DATA_PACKAGE.
 commit work.
 endif.
 select single CPR_ROLE into (role_assignment)
 from /BIC/AZCPR_O0100
 where CPR_GUID = DATA_PACKAGE-CPR_GUID.
 if sy-subrc = 0.
 select single CPR_BPARTN into (resource)
 from /BIC/AZCPR_O0200
 where CPR_ROLE = role_assignment
 and CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID.
 if sy-subrc = 0.
 DATA_PACKAGE-CPR_ROLE = role_assignment.
 DATA_PACKAGE-/BIC/ZRESOURCE = resource.
 modify DATA_PACKAGE.
 commit work.
 endif.
 endif.
 clear DATA_PACKAGE.
 endloop.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
Thanks,
Venkat.

Shortdump problem for loadinf data from ODS to InfoCube

hai
im trying to load the data from ODS to InfoCube.But i got the following error like below
Short dump in the Warehouse
Diagnosis
The data update was not completed. A short dump has probably been logged in BW providing information about the error.
System response
"Caller 70" is missing.
Further analysis:
Search in the BW short dump overview for the short dump belonging to the request. Pay attention to the correct time and date on the selection screen.
You get a short dump list using the Wizard or via the menu path "Environment -> Short dump -> In the Data Warehouse".
Error correction:
Follow the instructions in the short dump.
I looked at the shortdump.But it says that there is no shortdump for that particular date selection.
pls tell me wht i have to do
i ll assing the points
bye
rizwan

Hi Rizwan,
Why does the error occurs ?
This error normally occurs whenever BW encounters error and is not able to classify them. There could be multiple reasons for the same
o Whenever we are loading the Master Data for the first time, it creates SIDs. If system is unable to create SIDs for the records in the Data packet, we can get this error message.
o If the Indexes of the cube are not deleted, then it may happen that the system may give the caller 70 error.
o Whenever we are trying to load the Transactional data which has master data as one of the Characteristics and the value does not exist in Master Data table we get this error. System can have difficultly in creating SIDs for the Master Data and also load the transactional data.
o If ODS activation is taking place and at the same time there is another ODS activation running parallel then in that case it may happen that the system may classify the error as caller 70. As there were no processes free for that ODS Activation.
o It also occurs whenever there is a Read/Write occurring in the Active Data Table of ODS. For example if activation is happening for an ODS and at the same time the data loading is also taking place to the same ODS, then system may classify the error as caller 70.
o It is a system error which can be seen under the Status tab in the Job Over View.
What happens when this error occurs ?
The exact error message is System response "Caller 70" is missing.
It may happen that it may also log a short dump in the system. It can be checked at "Environment -> Short dump -> In the Data Warehouse".
What can be the possible actions to be carried out ?
If the Master Data is getting loaded for the first time then in that case we can reduce the Data Package size and load the Info Package. Processing sometimes is based on the size of Data Package. Hence we can reduce the data package size and then reload the data again. We can also try to split the data load into different data loads
If the error occurs in the cube load then we can try to delete the indexes of the cube and then reload the data again.
If we are trying to load the Transactional and Master Data together and this error occurs then we can reduce the size of the Data Package and try reloading, as system may be finding it difficult to create SIDs and load data at the same time. Or we can load the Master Data first and then load Tranactional Data
If the error is happening while ODS activation cause of no processes free, or available for processing the ODS activation, then we can define processes in the T Code RSCUSTA2.
If error is occurring due to Read/Write in ODS then we need to make changes in the schedule time of the data loading.
Once we are sure that the data has not been extracted completely, we can then go ahead and delete the red request from the manage tab in the InfoProvider. Re-trigger the InfoPackage again.
Monitor the load for successful completion, and complete the further loads if any in the Process Chain.
(From Re: caller 70 missing).
Also check links:
Caller 70 is missing
Re: Deadlock - error
"Caller 70 Missing" Error
Caller 70 missing.
Bye
Dinesh

Data Extraction from ODS to Infocube

Hi.
How will you extract data from ODS to Infocube. what is process ?
please explain....

Hi,
as the no.. of records arelot more then your usual loading ..
so it will take mmuch more time today ..but make sure that the job is running fine..
You can create load the data by creating selection but at this point i dont think you can do this.. because for this you have to kill the job ..may be some changes would have been happened
in the Ip thats why its picking more records..
hope this helps you ...
Reagds,
shikha

Error While Loading data from ODS to Infocube

I am trying to load data from ODS to Infocube thru Update ODS data into data target. My requirement was to take a small subset of fields from ODS and design IC and load the data.
My load fails at Extraction process as I get 0 records from total number of records sent in each package. Please let me know if you need more information.
Please advise.
Thanks,
RR

In Details tab of monitor, in extraction step,
Extraction(messages): Errors occured
Green Light for Data Request Received
Green Light for Data Selection Scheduled
Yellow for 25000 Records sent(0 records received)
Yellow for 25000 Records sent(0 records received)
Yellow for 15000 Records sent(0 records received)
Green Light for Data Selection Ended
Please let me know, If you need more information.
Thanks,
R R

Data tranfer from ods to infocube

Hi Friends,
I have created ODS and infocube, the data was loaded on ods sucessfully , but when tried to transfer the data from ods to infocube, the error comes. the update rules and data flows are shown correctly as in FUFU book.
the errors comes as check the load and after that the infopackage ask to delete the init request in same cube.
can anyone suggest the right way of tranferring the data from ODS to INFOCUBE and the issues to check.
Kind Regards,
Irfankhan

Hi
Recheck whether you have the request Activate data in ods (odsrcactivate data & Activate Data automatically while ods creation & odsmanageRequest tab -- request -- Activate)
If the Data is there in Active Data table then try to update the same with Update Rules.
While Info Package from ods--Cube -- the Info Package Selection should be Delta ( Init is already there in your cube as I have seen the error message you mentioned)
the update From ods to Cube
Via Info Package -- Data Target Tab -- Schedule it with options Delta --
Info Package -- Monitor -- Update Manually (Wheel)
Adding it in Process chain
Hope it helps and clear

Delta records not updating from DSO to CUBE in BI 7

Hi Experts,
Delta records not updating from DSO to CUBE
in DSO keyfigure value showing '0' but in CUBE same record showing '-I '
I cheked in Change log table in DSO its have 5 records
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - -1
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -   0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   1
ODSR_4LH8CXKUJPW2JDS0LC775N4MH -   0
but active data table have one record - 0
how to corrcct the delta load??
Regards,
Jai

Hi,
I think initially the value was 0 (ODSR_4LH8CXKUJPW2JDS0LC775N4MH - 0, new image in changelog) and this got loaded to the cube.
Then the value got changed to 1 (ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 0, before image & ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 1, after image). Now this record updates the cube with value 1. The cube has 2 records, one with 0 value and the other with 1.
The value got changed again to 0 (ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - (-1), before image &
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - 0, after image). Now these records get aggregated and update the cube with (-1).
The cube has 3 records, with 0, 1 and -1 values....the effective total is 0 which is correct.
Is this not what you see in the cube? were the earlier req deleted from the cube?

Error while loading the data from ODS to InfoCube

hai
Im trying to load the data from ODS to InfoCube for particular year .
But it says that there is a source system problem .
why it is like that .
pls tell me
i ll assing the points
rizwan

Hi Rizwan,
you didn't mention the error message in details. there could be a few places to be checked:
- check if BW itself source system is active and in tact and reactivate if necessary
- check if update rule is active and reactivate if necessary
- check if ODS is active and reactivate if necessary
Regards,
Lilly

How to debug start routines of update rules from ODS to InfoCube

Dear gurus,
I have an update rule from ODS to InfoCube. I wrote a start routine in the update rule. Now I want to debug it. I went to monitor and simulate update the data package and only got the prompt "No data exists in the corresponding PSA table". So how can I debug this start routine?
Thanks in advance.
Jin Ming

Jin,
In order to use PSA between ODS and InfoCube, you may have to use an exclusive InfoPackage and load separately. In that InfoPackage, choose the radio button to use a PSA.
I think you are currently updating the InfoCube directly without using a separate InfoPackage.
Look for an InfoSource under DataMarts (search for 8<ODS Technical name>) and create your InfoPackage there.
Good luck.

How to change it if some data is wrong in ODS and infocube

hi all:
could you please tell me how to change it if some data is wrong in ODS and infocube ?
Best regards

You receive information on all requests that have run in the InfoCube and you can delete requests if required.
http://help.sap.com/saphelp_nw04s/helpdata/en/d4/aa6437469e4f0ae10000009b38f8cf/frameset.htm
Request ID you can find in administration of the InfoCube. If a cubes is compressed you can't delete requestwise...
Regards
Andreas

When I add music from my CD onto my Macbook, the music will not transfer from iTunes on my Mac to my iPhone/iPad. I'm using iCloud, current software updates and Music Match. Any solutions?

When I add music from my CD onto my Macbook, the music will not transfer from iTunes on my Mac to my iPhone/iPad. I'm using iCloud, current software updates and Music Match. Any solutions?

I figured it out...user error

Error in Process Chain From ODS to InfoCube

Hi There
What variants should follow to load data from ods to infocube in process chains?
I created Process Chain,first delete content of ods and data load,Activate ods , further update ods , delete index , load from ods to IC and generate index and it's warning message.
Advice me regarding this.
Regards,
Chandu.

HI Chandu,
Please remove the further update process from the chain.
The chain should look like...
startdelete contents of the ODS-load to ODSactivate ODS-delete index of cubeload from ODS to Cubereconstruct indices.
If its only a warning msg ...u can neglect...try activating the process chain and run it with an immediate option.
By the way what does the warning msg say??
There should be a process.....something like this ...then neglect it..
Regards,
Marc
Message was edited by: Marc
Message was edited by: Marc

Delta loading from ODS to InfoCube

Hai
Im extracting the data from the custom table into ODS and doing full load everytime for loading delta.
how can load the only delta from the ODS to InfoCube. what are the setting for this one
pls let me know
kumar

Hai Ravi...
Load the Data From ODS to InfoCube:
Clck as right Click in the Specified ODS.....
Select the Option " Update ODS Data in Data Target "......
Then You able to load the Data to any type of DataTarget's(either ODS, InfoCube)
removed...
BalajeeKannan

Some records not transfer from ODS to infocube

Similar Messages

Maybe you are looking for