Some "Redirecting Pages" work And Another NOT
Some Pages Redirect me to another one, Firefox didn't Redirect me at many times and MSG still shown for me & NOTHING happened .
This is a snapshot of page which didn't load for me at Firefox but it is working at Another Browsers
http://s5.postimage.org/eu2ov695j/Firefox_Issue.png
I uploaded two examples of two pages :
Test.html didn't redirect and didn't loaded for me
https://sites.google.com/site/pepep2011/Test.html?attredirects=0&d=1
Test2.html Redirected and Loaded for me
https://sites.google.com/site/pepep2011/Test2.html?attredirects=0&d=1
Two Pages Maybe Load at your browser but Test.html Didn't work with me at Firefox but it is working at another Browser, Why ?????
Do you have a link to an actual page where such a redirect isn't working?
Similar Messages
-
Question
I was on an online course website, logged in and working on an assignment. Suddenly the page disappeared and was not on the tabs either. I went to the home page and tried to log back in and it said I was already logged in on another browser window and if I proceeded to log in again the assignment I was working on would be ended and I would receive a zero. I can't locate the browser window that I was signed in on. Help...I don't want to get a zero, but don't know how to get back into the website under my original log in & get back to my half completed assignment.Hi,
Please try this: In Firefox '''History''' ('''Alt''' + '''S''') and check if it is listed in either '''Recently Closed Tabs''' or '''Recently Closed Windows''' or in the list below. If you cannot find it click '''Show All History''', on the left of the window click '''Today''' below '''History''' and on the right look for the site entry corresponding closely to the time when you lost it. If you cannot see the column heading named '''Visit Date''', you may have to enable it by right-clicking on the column header strip.
Also please note that the online course site may have redirected you to another site for the test, so it is also a good idea to look into site entries that may match the time. -
Pages numbers and keynotes not working on handoff, but everything else is?
Pages numbers and keynotes not working on handoff, but everything else is, map, mail etc. Am I alone?
Really appreciate your help with this. I am a bit of a novice here.. but.. After some more searching on this issue I notice your comments (cut/pasted below) with respect to this router and bridging mode. You mentioned that I should update my firmware on this router and that this would (if I am interpreting your reply correctly) facilitate my LAN to LAN connection and of course using this router simply as an access point and more to the point - having the use of the guest network. So my question is even if I did update firmware, seems I would still require 3rd party software to make this work? (re your last sentence in your comments below) Just need to understand the process and determine whether or not it is worth it (or maybe I should upgrade the router) but I don't want to change the configs of the network wired router at this time... and need to use the E2500 or facsimile as simply an access point with guest network functionality, Thanks much appreciated.
"Again: some E series routers already support wired bridging in firmware, i.e. to use the router as simple access point.
This is and was always possible using a LAN-LAN setup instead.
The problem with the LAN-LAN setup is, however, that you have some limitations accessing the network storage or network printer, e.g. the router doesn't have the correct time and you cannot access the storage from remote using port forwarding through your main router.
These limitations have been overcome with the wired bridge mode (internet connection type = bridge mode).
But again: this has absolutely nothing to do with wireless bridging. That's something completely different and is not supported on Linksys routers in any firmware version so far. To do wireless bridging (i.e. the Linksys routers connects wirelessly to another main router) you need 3rd party firmware." -
I cannot send MMS from an iphone 5 - some people it works others do not receive it. MMS is turned on and i have tried to reset phone etc - still same problem.
Are the messages successfully sent?
If so, what happens to a message after it is successfully sent has nothing to do with the cell phone that sent the message. -
I have music on another computer that no longer works and did not back it up. Can Apple somehow retrieve it for me?
If they were purchases from iTunes then have you checked to see if you can re-download them (it's not possible in all countries), assuming that they are still available in the store : re-downloading ? If you aren't in a country where you can re-download past music purchases and you haven't got a backup, then you can try contacting iTunes support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
Since I downloaded 7.0.4 onto my iPad 4th gen. the wifi has been unstable.
The wifi will not consistently connect as a "guest" at work and will NOT maintain
the password for my wifi at home. Prior to the update to 7.0.4 this iPad never
had any wifi issues! I have tried all of the tactics of resetting wifi, re-downloaded the entire
7.0.4 and with the same wifi issues? At this point my iPad is useless to me without wifi!!!Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
How can I get a refund for apps in the apple App Store that do not work and are not what they said they wer
You've tried deleting and redownloading them and seeing if they then work and tried contacting the developers ? If you have and they can't/won't help then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?
Thanks. I can change the forwarding settings in Gmail to be either POP or IMAP. That is quite simple. I just looked at those settings on the Gmail server and, to my surprise, both are enabled. In order for outlook client on my computer to receive IMAP emails I have to change the email account settings in my current outlook from POP to IMAP. I don't need to be using the Exchange version of Outlook to receive IMAP. I guess I'll do a little research tomorrow on Exchange so i can figure out what, if anything, it might do for me.
I glanced at the link you sent me and it looks like it might be very helpful - another project for tomorrow.
BTW: I hit "This Solved my Question" by accident. I meant only to "like' your response so you would get some benefit from the help you've given me so far. I hope I haven't discouraged others from taking a shot at helping me. I suspect there is more than one way to approach this and, as you know, my problem isn't really solved until I have what I need all set up and running smoothly. -
RESTORE - Kernel Bad page - header and trailer not matching
Hello,
I have a Problem with the recover of my backup.
When i want to make a restore of the Database this error is shown in Logfile KNLDIAGERR
2008-11-26 21:20:38 --- Starting GMT 2008-11-26 20:20:38 7.5.0 Build 032-123-111-699
2008-11-26 21:26:57 0xE0C ERR 20005 Kernel Bad page - header and trailer not matching
2008-11-26 21:26:57 0xE0C ERR 20006 Kernel Header [ 5277032 - data - tab - checksumData - empty ]
2008-11-26 21:26:57 0xE0C ERR 20007 Kernel Trailer[ 0 - data - nil - chckNil - empty ]
2008-11-26 21:26:57 0xE0C ERR 52015 RESTORE write/check count mismatch 5277032
2008-11-26 21:26:57 0xDFC ERR 52012 RESTORE error occured, basis_err 300
2008-11-26 21:26:57 0xDFC ERR 51080 SYSERROR -9026 BD Bad datapage
any Help ?
thanks a lot
StevenHi Steven,
the database kernel checks with every read the header trailer. If it got a mismatch during read the error message you got is logged.
The same checkes will be executed when you create a backup. You told us that the backup could be executed without any errors and that the system where you created the backup is ok as well -> you executed a Check data?
Now everything looks like the error is in the backup and happened during writies to the external backup medium. Or the backup is ok and then the error happens during read from the external medium.
To get closer to the reason where the problem is located I need to have some more information.
1. You did the restore several times?
2. Did the bad Data Page shappens always on the same page -> Check knldiag.err
3. Did you do your backup on tape?
4. Did you try to create a backup into a file?
5. Does the restore from file got the error as well?
Regards, Christiane Hienger -
Quicktime x sometimes working and sometimes not...
hi,
i've installed the snow leopard.
now almost every movie doing me an hard time with the quicktime.
when i try to open the movie with the quicktime it writing "loading movie" and it never start. also the movie never shows on the preview in my finder.
it happens with all kind of media... and also some times it working and show the movie and sometime it doesn't show the same movie...
also it seems that that my keyboard media buttons doesn't support quicktime anymore...
need your help!It's not available as a download.
The only way to install it is to re-install the entire OS. -
Quicktime X sometime working and sometimes not...
hi,
i've installed the snow leopard.
now almost every movie doing me an hard time with the quicktime.
when i try to open the movie with the quicktime it writing "loading movie" and it never start. also the movie never shows on the preview in my finder.
it happens with all kind of media... and also some times it working and show the movie and sometime it doesn't show the same movie...
also it seems that that my keyboard media buttons doesn't support quicktime anymore...
need your help!Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups -
SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.
SSRS reports are always best viewed in IE and the report result what you see in IE always will not be same and consistent in thirdy party browswers.
So consider using IE as workaround.
Also please refer:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/2188de10-cff9-4e24-b14f-da5121f1c4a4/ssrs-calender-control-not-visible-in-chorme-on-server?forum=sqlreportingservices
Workaround here:
http://www.rajbandi.net/Fixing-SSRS-Report-Viewer-control-date-picker-in-Google-chrome/
-Vaibhav Chaudhari -
why does iTunes keep giving me bogus error messages. "Your internet connection is not working, check your connection and try again." My internet is working fine. iTunes is not working and will not allow me to download tunes.
This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013 -
In Photoshop Elements 11, the editor workspace has stopped working and will not open.
In Photoshop Elements 11, the editor workspace has stopped working and will not open.
Operating system? and how are you opening it? From a shortcut, from the welcome screen, from the organizer, from the program/application file itself?
-
I have the newest version of the mac book pro and i recently bought iLife 11 because i needed idvd but when i installed iLife my iphoto no longer works and will not let me open. How do i fix this
Welcome to Apple Support Communities
iTunes in Mac OS X Tiger is outdated. Open > Software Update to install the latest iTunes version for Tiger.
If you need iTunes 10.7 or a newer version, you have to upgrade to Mac OS X Snow Leopard. First, check that your Mac is supported > http://support.apple.com/kb/sp575 If it is, buy Snow Leopard > http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
After buying Snow Leopard, make a backup of your data, insert the DVD and upgrade to Snow Leopard. After upgrading, open > Software Update, and install the latest Snow Leopard version. Finally, run Software Update again to install iTunes 11.0.4. If you want to install iTunes 10.7 instead, download it from the Apple website > http://support.apple.com/kb/dl1576
Maybe you are looking for
-
ITunes does not sync my music???
I recently had to transfer my iTunes library onto a USB drive to get my laptops motherboard replaced. I restored the music back onto my laptop, and I just tried to sync my iPod for the first time today. Nothing happens. I tried restoring my iPod whic
-
BPM - JDBC adapter - How to trigger system errors thro' adapters?
I have designed the BPM in following way : 1. Receive step - Receive Asynchronous message 2. Defined the Block - DB 3. Send step 'A' to JDBC - inside the Block-'DB' - Acknowledgement-Transport, Exceptions System Error-'DB', Receiver from-Send context
-
Printing Problems with Elements 8.0 and EXIF time data
I've been using Premiere Elements 8.0 in Windows XP Professional for a couple of years with no problems. I shoot mostly in JPEG. I've always imported my images using a card reader (the same one). About a year ago suddenly I ran into printing issues.
-
Display items left to right & limit items per column
Hopefully these actually ARE basic questions with simple answers. 1. By default requested values of repeating nodes stay in a vertical table setting. How do you to display a repeating spry {values} in a horzonital format? EX: Left to right <p />
-
Passing field name into Cursor
I would like to pass the name of a field for the WHERE clause, into a cursor. In my application I need to change the field name for the where clause. I get an "Invalid Number" error when I try the following: cursor l_sel2Cur (c_group varchar2) is sel