Some Sales Orders are not replicating into CRM

Hi guys,
when I check SMQ2 in CRM, I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
*Error in SMW01*
Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled CRM_ORDER
Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG. SMW3
It's not giving much clue what's the error is...
I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
any help on this?
thanks,
Ken

Hello Ken,
When reprocessing a BDoc(via SMW01) you might need to set a flag.
Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
Thanks,
Rohit

Similar Messages

Delta changes in R/3 sales document are not coming into CRM

Hi Middleware experts,
We are on CRM 5.0 SP 005 with ECC 5.0 SP 007 and using the scenario X for sales documents replication.
Now the order is created in CRM and successfully transfered to R/3. I can see 3 Bdocs in SMW01 with green lights. First Bdoc says 'R/3 adapter is called', second Bdoc says 'the order is successfully saved' and displays a warning 'The sales document is not yet complete: Edit data' and third Bdoc has no messages. Also I do not see any struck queues in CRM and in R/3
I am able to edit the sales document in both the systems as per the scenario X. Now I have completed and saved the document in R/3. Surprisingly these changes are not coming into CRM and no new entries in SMW01. Also R/3 SMQ1 and CRM SmQ2 doesn't show any entries. I am also not able to debug, since I do not see any Bdocs in SMW01.
Now, if I changes the document in CRM and these changes are coming into R/3.
Also all documents created in R/3 are successfully going into CRM including delta changes in R/3.
I do not have any clue on what is happening? Highly appreciated, if you can help me.
Thanks,
PK

Hi PK,
In R3AC1 only we put the filter. So if you do not have any other filter then make sure that you are changing the order which was created not before the date mentioned.
I would recommend you to just deregister the CRM system in R/3 Transaction SMQS and do some changes in the orders and check any queues are getting created corresponding to that order, If yes that means filter is not an issue. Then debug the queue and find the exact problem. Also make sure that the order you are changing in R/3 is of the same order type what you have mentioned in the filter.
Make sure to registor back the CRM other wise all the queues will get stuck in R/3 outbound.
<b>Reward points if it helps!!</b>
Best regards,
Vikash.
Message was edited by: Vikash Krishna

TLB VMI Sales orders are not publishing into ECC

Hello All,
I am trying to transfer the VMI Sales orders in TLB Interactive planning from SCM (7.0) to ECC (6.0)
without any success. I am getting the messages "You have selected 0 change pointer", "0 change
pointers(s) processed" and "0/1 orders were transferred".
I could process these orders and send them to ECC via /SAPAPO/CCR. Did anyone face this
issue and if so please let me know reason for this issue.
Thanks,
Venkat

Hi Senthil,
In the interactive TLB, there is a option to send the order to the OLTP system directly. If
you select this on a particular order, then a change pointer is created and processed
immediately and the order is sent across to ECC. But that's not happening in my case.
I know of the transaction /SAPAPO/C5 which can be used to process the change pointers
in the background. As I mentioned above, I am trying to process in the interact TLB and
not in a batchmode. Anyway, the change pointer is not created in the first place.
Thanks,
Ratnam

CRM sales order is not saved in CRM but in ECC

Hi,
I am new CRM area and will not some hints on where to check.
When the the Sales orders are successfully created in CRM, they are replicated to R/3 but the sales orders are not saved in CRMD_ORDERADM_H table of the CRM system.
Also, I dont know see any details of the sales order in the interaction record document flow.
Can you please help me with any hints on where to check to fix this issue..

Hi Sangameshwar,
In CRM you can have two scenarios for ERP Sales Order.
1. ERP Sales offer and Sales order, using the CRM User Interface to create directly the ERP Sales Documents with LORD interface. The document is only saved in ERP. I believe this the scenario you are using.
2. CRM Sales offer and Sales order, the document is saved both CRM and ERP. The documents are replicated via Middleware.
In both scenarios the interaction record should add the document in the doc. flow, it's probably a missing customizing in the interaction record.
Hope this information help you.
Regards,
Jorge G.

Material delta changes are not flowing into CRM

Dear All,
material delta changes are not flowing into CRM, because the product hierarchy on material has been changed to a new product hierarchy. I do not want to download again the object DNL_CUST_PROD1 because it maight cause inconstancies in CRM. (I have already defined some z product hierarchies in CRM)
Do I need to create the new product hierarchy also in CRM manually?
Appreciate any inputs
Raj

Hi Raj,
Use the transacrion R3AR2 to create a z object for DNL_CUST_PROD1 and assign DNL_CUST_PROD1 as the object name
Then in request detail screen for new z object enter the details like table name (T179 in your case) and the name of the product hierarchy that you want to bring in. Save the transaction
Then use the transaction R3AR4 to initiate the download for your new z object as you normally do in R3AS.
Then go to SMW01 and reprosess the struck Bdoc.
Reward points if helps,
Regards,
Paul Kondaveeti

Third party sales orders are not showing in Billing due list (VF04 )

Hi,
In Billing due list Third party sales orders are not appearing because VKDFS table those entries are there. How can we get Third party sales orders in VKDFS table as well as VF04 ?
Please suggest me.
Regards,
KUR

Hi Kur & Sandepp,
Check this notes:A) Note 210500 - Billing status of a third-party item,B)2) Note 210561 - When is a third-party item displayed in VF04.
Re
Regards,
Madhu.

Planned orders are not taking into account the processing time

Hi,
Could you please tell me why planned orders quantities are not based on processing time from the material master.
Materials was set before with 1 day in house production , no matter of lot size.
Based on routings I updated material master with processing time depending on lot size.
What is bottering me now is that planned orders are not taking into account processing time. (e.g. based on my processing time 1000 pce are produced in 3 days, but planned orders show me that 1000 pce are still need in 1 day , but it can not be produced in 1 day ).
what did I miss?
Thanks a lot for any information!

Hello Simona
The in house production time from tab MRP 2 is lot size independent.
However, on tab work scheduling you can define a lot size dependent times.
Please observe that, if you have entered an in house production time, the processing time will not be considered. The F1 help of the field provides the following explanation:
You can define work scheduling times in the material master record in one of two ways:
Either you enter the in-house production time. If required, you can get the system to update this value from the routing.
Or you enter the setup, teardown, processing, and interoperation times. If you maintain these values, the system determines the in-house production time on the basis of lot size.
Therefore, if you want to consider the processing time, you should remove the in house processing time.
BR
Caetano

Open sales orders are not coming in credit exposure

Hi,
We have implemented FSCM credit management, when i am running credit exposure, i am able to see open items from FI (200) but not for open orders (100) & Delivery (400), we have created some sales orders, which have exceeded the credit limit, system should give us a warning message. Could anyone help me to overcome this issue.
Thanks,
Sai

Hi Sai,
Additionally, you should check the following BADI_SD_CM, if the implementation of that BADI is correct then it should work.
Best regards,
Cristobal.

Sales order are not coming in FS10N ?

Issue: How is it possible to see number of sales order in the detail of item in the transaction FS10N?
When i see the Transaction FS10N for 2011 , at item level Sale Documents are Present , but when i Use the Same FS10N for 2012 , Sale Document values are not present ?
Kindly tell me the possiblities why the Sale Document Values are not Coming ? Its Urgent .
Best Regards
Amit Arora

Did you install any major upgrades or other system changes recently? I am not saying that that could cause this, but I really cannot think of anything that would suddenly stop populating Sales Document and Sales Document Item when you enter a new fiscal year. Also, are you sure you are looking at the line items that originated in the SD module?

Sales orders are not shown within the ICWeb Account Fact Sheet

Hi experts.
We're having problems with the account fact sheet on the ICWeb.
Even though our test customer has sale orders assigne when we select Order History, the fact sheet shows no data. Nevertheless, when we press button new order and then Order History, then the sales order`s list is available.
By the way, we are using view ICCMP_ERP_ORDER.
Please, can anyone help us?
Thanks in advance.
Almudena

Hello,
I'm facing the same issue at the moment. I have check all customizing, and I didn't find why the sales area, shipping and billing data are still blanck when I logged through CRM WEBUI.
It will be very pleased, if you can tell me how you solved your issue ? maybe it will be the same for me
Thanks in advance
Best Regards
Alexandra Rodriguez

Planned orders are not converted into process orders in ECC.

Dear All,
The issue is that Planned orders with conversion tick are not publishing in ECC as manufacturing orders. We did check the relevant master data consistency between APO and ECC and it seems fine.
We have tried to send the conversion from APO to ECC,all the orders stuck in the R1P inbound queue with error - Order no. XXXX does not exist
Message no. C/006.
Based on above message and error we found SAP Note 515740 - Inconsistencies in table CIFORDMAP for this issue.
Used the transaction SE38 and created RCFORDCH report and 'Checking inconsistencies in table CIFORDMAP'
Here it shows order series stuck in queues no longer exists.
But not sure how to reconcile the inconsistency in the CIFORDMAP table.
Would appreciate your advice.
Regards,
Sajit SIngh

Hi Sajit Singh,
Could you take some sample items struck for order conversion and check
whether active PPDS & SNP PPMs available.
In some cases, conversion will be affected for want of PPMs. If it is the
case with you, try generating the PPM first for that sample item and retry
converting the orders.
Could you please check and confirm this.
Regards
R. Senthil Mareeswaran.

Sales order stock not taken into consideration when GR is posted.

Hello All,
I had a scenario in which, I have created a MTO sales order. I have created a PO from the PR. I did the GR for the PO quantity.
The plant and storage location are warehouse managed.(The storage location is HU managed)
I created an inbound delivery and then TO finally posted the GR for the same quantity as in the sales order and PO. After this I posted the sales order stock into scrapping through t.code VLMOVE.
Now I want the stock back. So I did a 552 with transaction code MB1A to the same plant and storage location against the sales order and the line item. This created an inbound delivery as the storage locaion is HU managed.
I created a TO from inbound delivery. Now the HU and the TO both have the sales order reference and spcial stock type "E".
But when I did PGR(Goods receipt) the system posts the stock in unrestircted use stock in IM side. Now there is a discrepancy in the stock in IM & WM.
In WM side the stock is in sales order stock but in IM side the stock is in unrestricted use.
I am wondering why during goods receipt the system is changing stock category from "E" to unrestricted.
Can any one help?
Regards,
Sushanta

you should have used movement type 552 E rather then using 552
and even if you have used 552 then you transfer the stock to sales order stock from own stock
follow the steps
1. use tcode MB1B
2. movement type 412 E

Why some PDF files are not imported into my iPod?

Hi, Yesterday, I added a new book to iTune and syn my iPod. After the syn, I found that only about 50% of the books on iTune showed up on the iPod. Can anyone tell me what is wrong and how to fix this problem so that all books can be imported?

Waht was the source of the books that did not sync?
Are they really pdfs w/o DRM?

Customers Created in R3 are not replicating in connected CRM System.

Dear All,
I am facing an issue " Customers created in SAP R3 are not replicating to CRM system".
Please provide me the possible do list (Check list) to solve this problem (if any Middleware settings also). This an urgent issue with the production system.
Thanks & Regards,
Ramana Rao

Hi ,
Check following :
SMQ1/2 - Inbound/ Outbound Queues in both ERP and CRM system.You can see if there some "stoppes"queues.
SMW01 - Bdoc messages in CRM - detailed explanation about errors in replication.
Check if "stop data" flag in table "CRMRFCPAR" in erp systemis is unchecked.
Check your filter definitions in R3AC1 trn business object "customer_main" .
Also check SAP Note 429423 - you have detailed check list for middelware problems.
Rika

Sales order qty not confirmed when delivery done with partial qty

Hi Guru's
Need your help............
We have issue in drop shipment scenario process. Sales order created with 10 line items from CRM and order released from CRM and replicated order to ECC and backend created PR also. After that user set reject status for all items so that PR line items also deleted, again user released rejection status for all items and line items updated in the same PR with different line item number for materials then PO & GR also done in ECC and stock also allocated for sales order line items but still sales order qty not confirmed in CRM sales order.
I checked all configurations regarding availability check but could not found.
Example:
Sales order line item qty: 4 - 2 qty confirmed (delivered).
For remaining qty (2 items)I have done GR. After GR It is allocated to sales order but it is not confirming the order quantity.
plz help me to fix this issue?
regards
sai

Hi,
Please check In ERP transaction OVZJ, for the sales org, distribution channel, and division that is being used in the affected sales orders, set the Avail. Check Rule to 'E'. Then retest the issue, as this might help.
Regards
Gavin

Some Sales Orders are not replicating into CRM

Similar Messages

Maybe you are looking for