Some Serious Bugs in Multicam

Why has nobody fixed these major bugs? Makes the multicam feature Complete **** and unusable.
I have 3 cameras on a wedding shoot. Synced em all up using PLural Eyes, make a multicam sequence and dropped it in there. Enabled multicam. So not only does the audio not work only (only left channel), but the multicam is completely full of crap! My third camera wasn't on the whole time, it was short clips. So whenever my third camera would shut off, the fricken multicam desides to always switch to the default camera as soon as the third camera goes off. Who the heck would do that? Causes more problems. Not only this, but if my third camera goes off, the video display goes red and DISABLES my choice, I can't switch to a second camera! Why would I want to switch to my second camera? Well my third camera went off, which by defualt, the multicrap decides to go to defualt camera, which happens to be the third camera, so it goes to a blank screen! and the multicrap outlines a red box which disables my camera and I cant choose another camera until the third camera comes back on! What balony crap coding nonsense is this?

I am not having this issue. ever.
and i even don't always have continuous video in the default track, i've just edited a concert shot with 4 cameras, all of them turned off sometimes due to various reasons, but no trouble to sync them, so i had holes in all 4 video tracks,
i just went back to the project to try to reconstruct your "bug" and failed to get the multicam to stop.
maybe you might try it without plural eyes?
maybe you might try reading this?: http://help.adobe.com/en_US/premierepro/cs/using/WSC29F4BF4-C2EA-4ad5-879E-778C2740A768.ht ml
emin3m33 wrote:
are you serious? or are u a serious amatuer? I can list at least 25 reasons why. But I cant list one reason why adobe would lock my choice from choosing a camera.
and maybe you might think about being nice to people, you're expecting help from,
so you might also want to try reading this:
http://forums.adobe.com/thread/414764#
good luck with your wedding edit and make sure to try Jim&Jeffs suggestion.

Similar Messages

Serious bugs in the SR400 gated photon counter LabVIEW drivers

Hi
I am developing an application with SR400 and came
across what I think is a bug in the LabVIEW driver. Essentially, none
of the VI's allow you to set the preset counters. For instance, if you
call Read VI and choose mode A, B for preset T, there is no way to
specify preset T, which means that the count period defaults to some
factory default, not a situation you want. This might also explain some
of the timeouts some people are getting to SRQs that come later.
Further,
if you look at the block diagram of Read VI, the line selector string
is set to "CM 0" for two distinct choices of the count mode. This is a
serious bug. I do not know who wrote this driver, but it does seem, at
least to me, that they did a rather shoddy job of it. How this driver even got certification to be posted at IDN is something I cannot explain.
Comments welcome from those that use LabVIEW with SR400 and have used this driver.

Hi. Dwell time of 2ms is good for me. It would be great if you can send me this file to circumvent the 2000points/measurement. Also, If i understand it right, if I set the Gate to CW, then my gate should always be open for the count period, they why do I have to set the gate parameters at all. I want to change the integration time, but for some reason I am not able to change it in your setup 2.VI at all. I made some changes in setup 2.vi. I removed the setting for channel B as I am not going to use it and I integrated the readchannel.vi into this file. I am not sure if I made a mistake in doing this. Now, I am able to write some data to a file, but I not as I want. If it helps, I am uploading my modified VI file and an example data file (Gate A width is 0.992s, Gate A delay and delay step are 0, Gate A mode is CW, Dwell time is 0.002s).
Attachments:
SR400-V.vi.vi ‏125 KB

Serious Bug Powerbuilder 12.5.2 build 5609 with Inheritance

Hi ,
I'm using Powerbuilder 12.5.2. build 5609. I think it is the latest release. I have three windows in my app.
The Grandfather , the father and the child. Child window (w_child) is inherited from the father (w_father) which inherits from the grandfather (w_grandfather).
I have some events in my windows , clicked events with code etc.
I made a change in the grandfather , regenerated the father and the child and my code in the child window was messed up!. And when I say messed up I mean that the code in my clicked event was disappeared or moved in other cases to other events.
With Full build and incremental build didn't fix the bug.
Using export and import FIXED the issue.
BUT.....
Why is this happening ? Of course this is a Powerbuilder BUG but do I need to export and import my objects when I make a change to ancestors objects ?
FYI using the edit source option I can see the code that it's there.
Will this issue been fixed because this is a very serious BUG. Every time I want to make a change to ancestors should I need to export all objects and import them again ???
thank you
zkar

Hi Andreas ,
I don't know.
But I tried the below scenario and found a different bug.
Same hierarchy. Grandfather, Father and Child.
Steps to reproduce.
1. Go to Fathers screen and Add a button. Leave the name as it is. cb_1
2. Go to Grandfather and add a button(didn't have any buttons yet). The name will be cb_1.
If you try to open the Father's screen you will be prompted from Powebuilder with a messagebox which suggest to make the changes for you because there was a name conflict. OK fair enough.
But.
If you press OK and let powerbuilder handles this then this doesn't work.
Anyway. This is a completely different thing from the original post . But I have just founded out trying to reproduce it to a new application.
FYI. The application was at first in Powerbuilder 10 but we have Migrated succesfully to powerbuilder 12.5 and It was working fine until we ;ve changed the intermediate level of inheritance.
The solution to my problem is export and import the intermediate level so don't search anymore. You will loose time trying to reproduce it.
thank you

Some serious problems with Mountain Lion

Hi everyone,
I upgraded my mid 2010 15" MBP to Mountain Lion 2 days ago, and I have some serious problems with my machine now.
- Wifi problem: like many members 's machines, mine has problem to connect to the wifi after sleep or restarting, I had to wait 10 to 15 minutes for it to connected to my home network. Anh I tried to remove all of my settings in System Preferences/Network and added new connection. And now it cant connect to wifi anymore. I'm writing this article while sitting on the floor with my Ethernet cable plugged in my MBP. I connected to internet through a DSL modem and a Airport Extreme as a bridge and Access Point. I also tried to set up all of my network device but my MBP can't connect to the wifi still.
- Keyboard problem with Pages: I was very happy with the new iCloud syncing for Pages documents but after 5 minutes, I met a big problem with Mountain Lion. Whenever I type in Pages with Vietnames Keyboard( Mac OS X built in or from another developer: http://www.trankynam.com/gotv/ ), Pages stops working immediately. I can still drag the Pages's window around but can't type or do any editing. After that I have to force quit pages. It is really stupid that I'm writing a book in Pages and now I have to stop my working till apple fixes this ridiculous bug. I tried German Keyboard as well and Pages worked flawlessly. Do you hate Vietnamese, Apple?
- Messages problem: Since upgrading to Mountain Lion I couln't send or receive any messages. It worked perfectly in Messages beta.
Does anyone have the same problems like me? Any solution such as how to reinstall Messages(I googled but found nothing)
Apple, please test your software more before release it. I feel like I have no computer at the moment because I can't work, can't surfing the web wirelessly and can't communicate with my friends.

HI,
- Messages problem: Since upgrading to Mountain Lion I couldn't send or receive any messages. It worked perfectly in Messages beta.
Does anyone have the same problems like me? Any solution such as how to reinstall Messages(I googled but found nothing)
What Messages to what type of Buddies or Contacts ?
This
I found out that the problem with my wifi was my MBP received automatically a ridiculous IP such as 169.254.170.0 instead of 192.168.1.4 as it should be.
WIll be part of the Issue as will be DNS issues.
mDNSresponder crashed with Handsoff! v1.5.3. After upgrading Handsoff! to v2.0.2, it works again.
In this case mDNSresponder also being stopped will stop DNS working.
I would guess if you have resolved these that you can Chat to people again.
4:33 PM Friday; July 27, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Serious Bugs

Hi Tim/Klaus.
I'm posting this here in the hopes that it will get a bit more attention than is being paid in Metalink. I've run into several serious bugs that need addressing:
1) If there are xml-special characters in the data coming from the database (e.g. an '&') then, according to the people at Metalink, I'm supposed to escape them. That's an unacceptable answer. I expect the parser to do that for me. That's why I bought it.
2) When using CVS as an output type, if a null value comes back from the database nothing is emitted into the output stream. For example, if I have 3 columns A, B, and C, if column B is null the jar's emit:
A,C
instead of
A,,C
which means I have to wrap every column in nvl(...) calls.
3) In the documentation it specifically states that you can dynamically append a WHERE clause to a query using PL/SQL functions (BI Users Guide, Part# B40017-01, page 4-32). I cannot get it to work and so I submitted a report to Metalink. They're answer was "we don't think that this can be done". The WHY is it in the User Guide???
4) CSV output sends out files with an extension of .txt which means you have to take extra steps to get the data into Excel (ok, so that one isn't too serious :)
5) When I configure the SSO server to use WNA (which I have gotten to work) when I try to launch the Word plugin and login, the server throws a 500 misconfigured error. It works if I don't use the SSO server.
6) The $CURRENT_SERVER_URL problem
These are causing us real headaches. Can anyone answer some of these questions?
Dave

Dave please seperate your questions into different threads because they are unreleated issues. Also, be sure to search the forum for solutions vs posting. It will save everyone sometime.
Thanks,
Ike
1) Special characters should be removed, however, I don't know what your doing. By the way a parser doesn't remove anything, it parses.
3) Lexical paramters in where clauses in bi publisher enterprise 5.6.2 work like you would expect them to (like reports 6i), however bi publisher in the e-business suite they do not work as expected and lexicals are not treated by value. It's completly backwards since you would expect the functionality to work in 11i. With that being said, I don't know what your doing in your report. The functionality works.

Serious bug of IOS5, can't send receive call&SMS

I have a iphone 4 and upgrade ios 5, after that i find some problem.
1, switch off the Cellular data.
2, send several MMS to my iphone. more than 3 MMS.
3, do a location update, you can swith off the phone and then swith on again. or walk to some place without signal coverage and then come back.
4, now the phone can't send or recevie call, also can't send and receive SMS, the phone has no error message.
But if you switch on the Cellular data, after the iphone receive MMS, everything okay again.
I think this is a serious bug of ios5, if i travel to other country, i will switch off the Cellular data, and my operater will send me MMS every day, if i reboot my phone, than i can't send or receive phone call. The most serious, if my friend call me, from his side, the ring is on, buy on my phone, there is no response of this phone call!!!

Hi there, NewVerizonCustomer! So sorry to see that you're not able to send your messages. I'm eager to help! First, have you noticed that those contacts with failed messages tend to be the same contacts each time? If that's the case, do you know if those contacts are also iPhone users (doesn't matter which carrier)?
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Home Phone Service via Verizon Wireless needs some SERIOUS rethinking!

Has anyone else signed up for home phone service over Verizon Wireless?
Here in LA, they offered a $19.99/month deal using the wireless service - a box provides the service, and you plug your home phone in. The service is adequate, but somebody forgot to think about how home phones work. I tried to get my billing set up through my bank, and after getting no notice for three weeks, I got a message in my email box that my bill was delinquent, and I owed a late fee. I had tried to set up the billing via My Verizon, but could never get a password to work. I finally got a phone number to call, and they sent me a new password via text message - to a home phone with no text capabilities. After hearing and seeing nothing for another two weeks, I called again, and they told me they'd sent the message. I had to remind them that this was a home phone - no texts. So they offered to send me a letter with a new password, within 7-10 ten days. It arrived two weeks later, and didn't work. Each of these phone calls took about an hour, and I still didn't have a connection.
I put the bills (now up to two delinquent cycles) on my credit card, just to bring thins current, and got one more password. This time I called BEFORE trying it, and with the assistance of a more determined tech, got an ID and password combination to work. I can now see my bill. I still don't know if the autopay will work, and I have no idea if there's any way to get a notice that the bill wasn't paid.
I cancelled my AT&T service because of its cost, but at least its billing worked. Verizon has some serious rethinking to do about how it's billing system works for home users. And they didn't lock me into billing hell for two years.
The topper is, today, I got a notice from Verizon that I've been delinquent in returning a refurbished instrument I never received, billed to a phone number I don't have. And of course there's no phone number to call to straighten it out.

Hello KeyGroupGJ!
Wow, Im sorry for all the issues you have had with the Home Phone Connect service! I'd really like to assist you. You mentioned that there is no number to call to get this straightened out. No worries, there is no need to call us, since I can reach out to you. Please send me a direct message with your name, your mobile number, and a good contact number for you. I'll be happy to assist you!
Christina B
VZW Support
Follow us on Twitter @VZWSupport

I am having some serious issues with firefox, i can't print anything because it is stuck on fax and I can't use any of the drop down menus on any site

I am having some serious issues with firefox to the point of choosing another search engine. I can't print anything because it is stuck on fax and won't let me change it to my printer when i do try to select my printer it jumps right back to fax. The drop down menus do not work on any of the sites I go to. For example when purchasing clothes and you have to choose a size from a drop down menu I can't do it when I click on the drop down menu it doesn't work at all. I don't have a virus I ran my virus protector and no viruses are present. I don't have any suspicious issues going on with my computer so there has to be something in Firefox that is causing my issues. I tried internet explorer and I don't have any issues there. I hope you can help me because I love Firefox and would really like to continue to use it.

Lots of issues there, main one getting fcpx going again, try deleting the preferences using the utility deveoped by these guys.
http://www.digitalrebellion.com
Try deleting your render files and re-rendering the project.
Start with these and let us know how you go.
Tony

Hi, I developed a web application using HTML5-Offline Application Cache mechanism. Inspite of deleting the cache as mentioned in the above steps, Firefox still maintains a copy of the page in it's cache. Also, a serious bug is, even though we delete all

== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
Hi,
I developed a web application using HTML5-Offline Application Cache mechanism. Inspite of deleting the cache as mentioned in the above steps, Firefox still maintains a copy of the page in it's cache. Also, a serious bug is, even though we delete all temp files used by Firefox, and open the previously cached page, it displays it correctly, but upon refreshing/reloading it again shows the previous version of the page maintained in the cache.
== Troubleshooting information
==
HTML5: Application Caching
.style1 {
font-family: Consolas;
font-size: small;
text-align: left;
margin-left: 80px;
function onCacheChecking(e)
printOutput("CHECKINGContents of the manifest are being checked.", 0);
function onCacheCached(e) {
printOutput("CACHEDAll the resources mentioned in the manifest have been downloaded", 0);
function onCacheNoUpdate(e)
printOutput("NOUPDATEManifest file has not been changed. No updates took place.", 0);
function onCacheUpdateReady(e)
printOutput("UPDATEREADYChanges have been made to manifest file, and were downloaded.", 0);
function onCacheError(e) {
printOutput("ERRORAn error occured while trying to process manifest file.", 0);
function onCacheObselete(e)
printOutput("OBSOLETEEither the manifest file has been deleted or renamed at the source", 0);
function onCacheDownloading(e) {
printOutput("DOWNLOADINGDownloading resources into local cache.", 0);
function onCacheProgress(e) {
printOutput("PROGRESSDownload in process.", 0);
function printOutput(statusMessages, howToTell)
* Outputs information about an event with its description
* @param statusMessages The message string to be displayed that describes the event
* @param howToTell Specifies if the output is to be written onto document(0) or alert(1) or both(2)
try {
if (howToTell == 2) {
document.getElementById("stat").innerHTML += statusMessages;
window.alert(statusMessages);
else if (howToTell == 0) {
document.getElementById("stat").innerHTML += statusMessages;
else if (howToTell == 1) {
window.alert(statusMessages);
catch (IOExceptionOutput) {
window.alert(IOExceptionOutput);
function initiateCaching()
var ONLY_DOC = 0;
var ONLY_ALERT = 1;
var BOTH_DOC_ALERT = 2;
try
if (window.applicationCache)
var appcache = window.applicationCache;
printOutput("BROWSER COMPATIBILITYSUCCESS!! AppCache works on this browser.", 0);
appcache.addEventListener('checking', onCacheChecking, false);
appcache.addEventListener('cached', onCacheCached, false);
appcache.addEventListener('noupdate', onCacheNoUpdate, false);
appcache.addEventListener('downloading', onCacheDownloading, false);
appcache.addEventListener('progress', onCacheProgress, false);
appcache.addEventListener('updateready', onCacheUpdateReady, false);
appcache.addEventListener('error', onCacheError, false);
appcache.addEventListener('obsolete', onCacheObselete, false);
else
document.getElementById("stat").innerHTML = "Failure! I cant work.";
catch (UnknownError)
window.alert('Internet Explorer does not support Application Caching yet.\nPlease run me on Safari or Firefox browsers\n\n');
stat.innerHTML = "Failure! I cant work.";
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 ( .NET CLR 3.5.30729; .NET4.0E)
== Plugins installed
==
*-Shockwave Flash 10.0 r45
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Google Update
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Npdsplay dll
*DRM Store Netscape Plugin
*DRM Netscape Network Object
Thanks & Regards,
Kandarpa Chandrasekhar Omkar
Software Engineer
Wipro Technologies
Bangalore.
[email protected]
[email protected]

We have had this issue many, many times before including on the latest 3.6 rev. It appears that when the applicationCache has an update triggered by a new manifest file, the browser may still use only its local network cache to check for updates to the files in the manifest, instead of forcing an HTTP request and revalidating both the browser cache and the applicationCache versions of the cached file (seems there is more than one). I have to assume this is a browser bug, as one should not have to frig with server Cache-Control headers and such to get this to work as expected (and even then it still doesn't sometimes).
The only thing that seems to fix the problem is setting network.http.use-cache to false (default is true) in about:config . This helps my case because we only ever run offline (applicationCache driven) apps in the affected browser (our managed mobile apps platform), but it will otherwise slow down your browser experience considerably.

My computer has some serious problems, my iphoto only shows thumb size pics when I try to open them, i tried to rebuild my files from folders that had the pics in them. originally all the photos has a large delta with a question mark. also I can't back up

my computer has some serious problems, my iphoto only shows only shows thumb size pics when I try to open them, i tried to rebuild my files from folders that had the pics in them. originally all the photos had a large delta with a question mark. also I can't back up the library file because its not there. I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place. I also lost my Idvd file, only have broken chain showing.

Details please
What version of iPhoto and of the OS?
i tried to rebuild my files from folders that had the pics in them.
Exactly what did you do and how did you do it? this ay be the cause of your issue but without details we can n=ony guess
my iphoto only shows only shows thumb size pics when I try to open them,
where do you see htis? In the iPhoto window? what does "try to pen them" exactly mean?
originally all the photos had a large delta with a question mark.
Ok - this usually has a simple solution - do you still have a copy of the library that has this problem?
also I can't back up the library file because its not there.
This makes no sense at all - all of your previous statements indicate that you do have an iPhoto library but have some problems with it
By default your iPHoto library is located in your Pictures folder and is named iPhtoo library - if tha tis not the case the you have moved or renamed it and only you know what you did until you tell us the details
I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place.
Again unless you actually share what and how you are doing thing but continue to simply state abstract problems it is no possible to assist you - details on using Time Machine are here -- http://support.apple.com/kb/HT1427?viewlocale=en_US&locale=en_US -- and -- http://pondini.org/TM/FAQ.html ---
I also lost my Idvd file, only have broken chain showing.
This would be better addressed in the iDVD forum - but again unlesss yu share detailed information no one can assist
LN

Greetings from a Photoshop Newbie. I need a computer, preferably a Mac laptop, with some serious processing power. I take photos with a Pentax 645Z; files are 50MB raw. I upload from Adobe Bridge and manipulate the photo, sometimes turning them into files

Greetings from a Photoshop Newbie. I need a computer, preferably a Mac laptop, with some serious processing power. I take photos with a Pentax 645Z; files are 50MB raw. I upload from Adobe Bridge and manipulate the photo, sometimes turning them into files in excess of 250MB. I cannot resize as the large files are needed for enlargements. Have all sorts of problems trying to manipulate, add effects and saving most large files. I need some serious processing power. Can anyone suggest what Mac i should purchase? I thank you in advance for your help :-)

It sounds as if you're having some system-related problems now, unrelated to processing power as such. In particular, a buggy video driver can cause everything to slow to a crawl.
Medium format files are big, true, but not so big as to cause significant slowdowns on a normally functioning and reasonably current computer. A laptop will always be slower than a well-equipped desktop system, though. Mac vs PC plays no part in this, performance is unrelated to platform.
Bottlenecks are different in ACR and Photoshop, so that should give you a clue. ACR is computing-intensive and mostly limited by CPU speed. Photoshop, however, is mostly bandwidth-intensive and mainly limited by memory and disk throughput. It's also sensitive to GPU issues.

WARNING: Serious bug in Netscape 6.01 browser

All--
I've just been bitten by a serious bug in the Netscape 6.01 browser, and
want to let you know about it before it bites you too. Full bug details can
be found at http://bugzilla.mozilla.org/show_bug.cgi?id=55055
A short summary is that the back & forward buttons incorrectly resubmit form
fields. For example, say I have this page flow:
Page A -> Page B - (submit form) -> Page A -> Page C
Use Back button to go from C back to A
On backing up from C to A, Netscape tells me that there are posted form
elements and asks if I want to resubmit them or cancel the back action.
Because I'm backing up to A, it tries to resubmit the form fields from page
B in order to show page A!
What does this mean? It means that the Web application gets another hit to
page B, as if the user had pushed a button on it again--even if this isn't
allowed by the application. In other words, the back button becomes a
serious threat to an application's consistency. Neither IE nor Opera do
this, nor did any other version of Netscape.
Please keep this behavior in mind if you are designing an application that
could be used with Netscape 6. For those transactions that you need to
ensure aren't executed more than once, you may want to set a hidden field on
the page (page B) or otherwise keep track of a value that indicates whether
the transaction has been executed or not. Another option might be to set an
HTTP header indicating that the problematic page (page A) can't be cached by
the browser (this differs from what one might do in the "normal" situation
of telling the browser not to cache page B, so that backing up from page A
to B wouldn't be possible).
Todd

Double tap with THREE fingers. Then go into Settings>General>Accessibility and turn zoom off.

Im in need of some serious help...

Im new to using Logic Pro 9 and software for that matter, I need some serious help if there is anyone who can help me. I have a Imac and Logic Pro 9 and I would like to do all of my sequencing and editing here. But I am a dedicated user of hardware but would love to make the intergration of both. So I have 8 external hardware keyboards and sound modules I would like to use and sequence my beats on Logic. I have an Edirol Um 880 midi interface and also a Roland Integra 7 sound module that I am trying to use as my audio interface via USB aswell as use the internal sounds. Im having trouble with the set up and making it all work the way I am intending it to work. I have my keyboards and sound modules connected to the edirol midi interface via midi ofcourse and the usb cable connected to my Imac and the edirol and 8 midi ports show up in logic when I create an external instrament track, but when i choose one of the um880 ports and lets say i choose channel one I get sound but from all 8 of my external devices but should only here one sound per channel coming from that specific midi port not all 8 at the same time. Im doing something wrong. To add more info, my Integra 7 is connected using USB to the Imac also and Im using the audio Ins and Outs of the integra. Now I also have a mixer which all of my keyboards and sound modules are connected for audio and the outs of my mixer is connected to the inputs of my integra 7 to get sound into logic which I am getting sound, I can record and here playback but my problem is being able to seperate the channels to a dedicated track without pressing a key and hearing everything play at once. Also Im not sure(once i fix the first problem) if I sequence my beat in midi and then bounce the midi tracks to audio tracks afterwards to mix and edit each track. Im going wrong somewhere in my set up either in my edirol um 880, or the Integra 7 or in Logic Pro 9 or maybe just all of the above, can anyone help me out, Please. Also Im using OS 10.6.8.

Have you considered this?
Local control and MIDI outputting.
>Learning about Local Control is crucial if you are to make the most of a combined synthesizer/MIDI controller. The term is used to define whether the hardware is in control of its onboard synth; if Local Control is on (default setting) then playing the keys and tweaking the controls will trigger sounds as the synth's patches are activated. With Local control off, pressing keys and adjusting controls will just output MIDI information to the sequencer, which will either trigger sounds within the computer or return to the hardware at whatever MIDI channel is determined by the sequencer (to control the unit itself or an additional MIDI instrument connected to it). Most synthesizer/MIDI controllers do not allow this kind of control as their front panel controls do not output MIDI data, so Local Control off means that only the keyboard can be used for controlling external devices but not the buttons, faders and pots.<
Have a nice day!

Serious Bugs in LabVIEW 2011

Dear Sir or Madam,
I have been working with LabVIEW for 10 years.
recently I have istalled the last version (LabVIEW 2011) and encountered some fundamental Bugs as bellow:
1-when I want to close LabVIEW 2011 Platform,it taks about 3 sec time to be closed ! while this was not in earlier version such as LabVIEW 9 sp1.
2-In a typical Front Panel,when I press Ctrl+M to chenge to Run mode,it went but after pressing Ctrl+M again,it will not exit from run mode(THIS BUG HAPPEN SOME TIMES NOT ALWAYS) or when I do right-click to view Function pallet or Control pallet,nothing happen!(THIS BUG HAPPEN SOME TIMES NOT ALWAYS).
I will be happy if you tell me what is the reasons and can I trust on LabVIEW 2011 for big projects or It is better for me to used LabVIEW 2009 as the past.
thank you for your kind attention.
Regards,
Ata Rahai,
Specialist Engineer.

Hi
I believe that 2011 is a very stable version (I was beta testing) and in my system the CtrlM works both ways, always.
Taking a few seconds to close is normal since version 8.0, depending on how many services are running. LV does clean up the system.
greetings from the Netherlands

Fixed 11.0 BUG, but had another more serious BUG in 11.1

But no one found this BUG, \u200b\u200bI have a question, and also did not care for me, from time to time lay off 750 people this time, the 11.0 developer to cut, resulting in 11.1 H.264 encoding so bad. And 11.0 full immeasurably.
https://bugbase.adobe.com/index.cfm?event=bug&id=3005174 I guess because the fix this BUG, \u200b\u200bcaused. In fact, not good, if not repaired
https://bugbase.adobe.com/index.cfm?event=bug&id=3047043 11.1 New BUG, \u200b\u200bbut did not care for me, this is a very serious BUG, \u200b\u200bif not found, then it will put an end to 11 series, but 11.0 is excellent, and I hope can be restored to 11.0 in 11.2 look like.

But no one found this BUG, \u200b\u200bI have a question, and also did not care for me, from time to time lay off 750 people this time, the 11.0 developer to cut, resulting in 11.1 H.264 encoding so bad. And 11.0 full immeasurably.
https://bugbase.adobe.com/index.cfm?event=bug&id=3005174 I guess because the fix this BUG, \u200b\u200bcaused. In fact, not good, if not repaired
https://bugbase.adobe.com/index.cfm?event=bug&id=3047043 11.1 New BUG, \u200b\u200bbut did not care for me, this is a very serious BUG, \u200b\u200bif not found, then it will put an end to 11 series, but 11.0 is excellent, and I hope can be restored to 11.0 in 11.2 look like.

Some Serious Bugs in Multicam

Similar Messages

Maybe you are looking for