Some service missing in PI 7.31

Hi Experts,
Urgent!!
I'm checking readiness of SAP PI 7.31 dual stack and following SAP note : 817920.
When run transaction SICF for testing the HTTP services on the Integration Server, some service is missing, like esf_secure,pm.
Please suggest what should do? how it will effects? need to contact with basis team?
Thanks,
Arthita

Hi Archita,
I had checked with the SS which you mentioned, and only esr_secure is found missing, its meant for secure WS activity, so you can contact your BASIS to do that activity. All other services is available in your SOAP run time.
But I am sure about its optional or Mandatory ,but better to activate that service.
Thanks,
karthick

Similar Messages

  • Some Services not appearing in ESS.

    Hi All,
    I have configured ESS and it was working fine previously.
    But now Some Services on overview page of ESS are missing after 105 mapping.
    This issue is for all the users.
    But if i remove 105 mapping all the service link appearing on overview page.
    services not appearing after 105 mapping : Form 16, tax declaration , IT declaration , work Event AreaPage.
    System version is EHP7.
    Kindly suggest.
    Thanks & Regards,
    Meghal Shah.

    Hi CRANGV,
    we are  not using any UI5 Application so ODATA is not required.
    we have configured LPD_CUST properly.
    If Employee not maintain in 105 than all the services are appearing.
    but if we map user under 105 infotype than some services is not appearing .
    Thanks & Regards,
    Meghal Shah.

  • Services missing for DUET Configuration

    Hi all,
    In configuring DUET Enterprise, certain services are missed out which are required for completing the configuration. The missed services are :
    /sap/bc/webdynpro/sap/saml2
    /sap/public/mysssocnt
    /sap/bc/srt/pm
    In SICF tcode, when I see the above services, Iam unable to find out.
    Can anybody clear me that, for these services, we need to install certain patches or any other alternative is there to get these services.
    Thanks & Regards,
    Kris

    Hi Holger,
    Thanks for your reply.
    As mentioned in chapter 3.3.2 Configure the Service Provider for StarterServices Endpoints for duet Enterprise.
    We need to perform some steps on the SAP system on T.code: soamanager.
    while performing step number 9 on chapter 3.3.2 we are unable to see
    Application and Scenario Communication tab (or the Service Administration
    tab) and we are stuck here.
    Moreover,
    while manually adding services describe in 3.3.2 chapter i am getting
    error "0 entities found!"
    Procedure iam following is desribed below:
    1. Go to T.code: soamanager.
    2. Click on Business Administration.
    3. click on Mass configuration.
    4. click Create
    5. In the Configuration Scenario section fill in the following:
    a. Enter the configuration scenario name, for example, StarterServices.
    b. Enter a description for the scenario, for example, Services used by
    Starter Services.
    6. Select the Provider tab and click Add.
    7. Select the Search tab.
    a. In the Search by field, select Service.
    b. In the Search Pattern field, enter the name of a starter service
    required service, for example CustomerERPByIDQueryResponse_In.
    c. In the Field field, select Both Names.
    d. Click GO.
    e. Click Add to Worklist.
    when i click on "go" as mentioned in step number 7 above i am getting
    error "0 entities found!".
    So we are assuming it might be due to the services missing in SAP(backend system).
    Please suggest on it.
    Thanks
    Kris

  • How can I install plugins? my files are not opening because some are missing after updating my OS

    How can I install plugins? my files are not opening because some are missing after updating my OS
    I can´t update the software because it crashes
    Thanks

    Casiii which Adobe software or service is your inquiry in reference too?

  • *Some Text Missing* Nokia 6288

    Hey, whenever my mobile tries to receive large messages (I guess they're messages spanning over 160 characters?) I get the *some text missing* phrase along with the last part of the message (normally only a few characters/words).
    I was just wondering if there's anything I can do to solve this? If I text the sender back telling them I only got half the text, as soon as they send a new 1 to me the first half of the original message arrives. Obviously this is a great hassle, and a waste of a text for me and the sender, is there any other way to combat this problem?
    Thanks

    This happened when there's not enough memory left for the message that it receives. The main memory of the phone is always use in this process(it is shared with other program too); so to get multipage(span more that 160 chars) text messages successfully in which the latest Nokia phone models is capable of, one must free the main memory as much as possible. Transfer or archives your text message to external memory.
    Service provider considered one text message if it does not exceed the 160 character limit. If it does, it considered it as a multi-text, and billed likeless. It send it in series of succession depending how busy the network.
    Message Edited by android on 22-Mar-2008 10:54 AM
    Message Edited by android on 22-Mar-2008 10:56 AM
    Knowledge not shared is knowledge wasted!
    If you find it helpfull, it's not hard to click the STAR..

  • Systemd: some services starting too early and then failing

    Hello everyone,
    I freshly installed Arch on this new laptop (Asus Zenbook Prime UX32VD) and from the start, I wanted to have a pure systemd setup. I'm using services only and I've uninstalled initscripts and so far it's working relatively well.
    However, some services seem to start too early by default and the workarounds are unsatisfactory.
    Problem 1: asus-screen-brightness and asus-kbd-backlight
    On this lap top, the stock screen brightness buttons do not work (yet). A script and a service file (which are both available via the asus-screen-brightness AUR package) have to be used to allow users to change the brightness via the script. The problem is, with that service enabled, it only succeeds sometimes. About have of the time booting the laptop it fails, most likely because the necessary nodes in /sys/ do not exist yet. Restarting the service manually after booting does the trick:
    [root@tachychineta shapeshifter]# sc status asus-screen-brightness
    asus-screen-brightness.service - Allow user access to screen brightness
    Loaded: loaded (/etc/systemd/system/asus-screen-brightness.service; enabled)
    Active: active (exited) since Fri, 12 Oct 2012 11:23:44 +0200; 1min 1s ago
    Process: 320 ExecStart=/usr/bin/asus-screen-brightness allowusers (code=exited, status=0/SUCCESS)
    CGroup: name=systemd:/system/asus-screen-brightness.service
    Oct 12 11:23:44 tachychineta systemd[1]: Starting Allow user access to screen brightness...
    Oct 12 11:23:44 tachychineta sudo[349]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/chmod g+w /sys/class/backlight/intel_backlight/brightness
    Oct 12 11:23:44 tachychineta sudo[349]: pam_unix(sudo:session): session opened for user root by (uid=0)
    Oct 12 11:23:44 tachychineta asus-screen-brightness[320]: cat: /sys/class/backlight/intel_backlight/max_brightness: No such file or directory
    Oct 12 11:23:44 tachychineta asus-screen-brightness[320]: /usr/bin/asus-screen-brightness: line 8: /10: syntax error: operand expected (error token is "/10")
    Oct 12 11:23:44 tachychineta asus-screen-brightness[320]: /usr/bin/asus-screen-brightness: line 10: 2*: syntax error: operand expected (error token is "*")
    Oct 12 11:23:44 tachychineta asus-screen-brightness[320]: cat: /sys/class/backlight/intel_backlight/brightness: No such file or directory
    Oct 12 11:23:44 tachychineta asus-screen-brightness[320]: chgrp: cannot access ‘/sys/class/backlight/intel_backlight/brightness’: No such file or directory
    Oct 12 11:23:44 tachychineta asus-screen-brightness[320]: chmod: cannot access ‘/sys/class/backlight/intel_backlight/brightness’: No such file or directory
    Oct 12 11:23:44 tachychineta systemd[1]: Started Allow user access to screen brightness.
    [root@tachychineta shapeshifter]# sc restart asus-screen-brightness
    [root@tachychineta shapeshifter]# sc status asus-screen-brightness
    asus-screen-brightness.service - Allow user access to screen brightness
    Loaded: loaded (/etc/systemd/system/asus-screen-brightness.service; enabled)
    Active: active (exited) since Fri, 12 Oct 2012 11:25:28 +0200; 2s ago
    Process: 2547 ExecStop=/usr/bin/asus-screen-brightness disallowusers (code=exited, status=0/SUCCESS)
    Process: 2579 ExecStart=/usr/bin/asus-screen-brightness allowusers (code=exited, status=0/SUCCESS)
    CGroup: name=systemd:/system/asus-screen-brightness.service
    Oct 12 11:25:28 tachychineta systemd[1]: Starting Allow user access to screen brightness...
    Oct 12 11:25:28 tachychineta sudo[2593]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/chgrp users /sys/class/backlight/intel_backlight/brightness
    Oct 12 11:25:28 tachychineta sudo[2593]: pam_unix(sudo:session): session opened for user root by (uid=0)
    Oct 12 11:25:28 tachychineta sudo[2597]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/chmod g+w /sys/class/backlight/intel_backlight/brightness
    Oct 12 11:25:28 tachychineta sudo[2597]: pam_unix(sudo:session): session opened for user root by (uid=0)
    Oct 12 11:25:28 tachychineta systemd[1]: Started Allow user access to screen brightness.
    Exactly the same problem occurs with asus-kbd-backlight.service which is needed to allow users to control the keyboard backlight. It also fails because of missing /sys/ entries if started too early.
    Problem 2: automatic login & X11
    I use the method described on the wiki to autologin into TTY1 with my user and my .bash_profile contains
    [[ $(fgconsole) = 1 ]] && startx
    and my .xserverrc is configured as explained in this fantastically useful article by falconindy.
    This way, X starts automatically and my session is properly authenticated for things like udiskie. I'm not using [testing] but instead rebuilt polkit with --enable-systemd and it's working just fine. The problem is, just like in problem 1, Xorg fails to start every now and then, failing with
    (EE) No devices detected.
    I don't have a full log because it hasn't happened in a while, but I'm very certain it's because the chipset isn't ready, yet.
    Solutions?
    I added "i915" to /etc/modules-load.d/static.conf hoping that would cover both the Xorg and backlight problems but it doesn't help. I then tried adding i915 to my MODULES in mkinitcpio.conf and rebuilding the initramfs and at least it looked like that way the problems went away but it added about 4 seconds to the time spent by the "kernel" during boot which is quite unacceptable. (Plots with and without i915 in MODULES).
    I read the systemd.unit and systemd.service man pages but I can't find a way to speficy required kernel modules for a service file. I'm not sure if specifying the modules in /etc/modules-load.d shouldn't be enough (because apparently it's supposed to load for sysinit.target, which is early) but apparently it isn't.
    Any ideas how I can get these services to work properly without sacrificing too much boot time?
    Thank you
    Last edited by Shapeshifter (2012-10-12 10:20:09)

    Please fill a bug report.

  • Suggestion when only able to connect to some services when using Kerberos.

    I had been having problems using Kerberos for authentication for some services. It worked fine when on a LAN and worked when I had a VPN (MS-CHAP). But when trying to connect normally, I was able to get a TGT, but often ran into issues when trying to connect to other services (e.g. IMAP / VPN). What's more, sometimes everything did work, but stopped again soon after.
    My setup has one server providing all the services in question. There were several CNAMES linking the different services (e.g. ichat.mydomain, mail.mydomain etc).
    I found a number of people who seemed to have similar issues, but the threads were archived so I couldn't post a reply. So I'm hoping they come across this message and it helps them.
    Because of an unrelated problem, it was brought to my attention that there were some problems with the DNS records relating to my domain – not on my server, but on the net.
    After some experimenting, I discovered that if I set the DNS (in System Preferences) on my client Mac to the server I was contacting most things worked.
    It seems that the Kerberos system may do a reverse lookup at some point, or something similar.
    When I do a "dig -x <my ip address>" I get different responses over time, and from different DNS servers. When I did "dig @<my own dns> -x <my ip address>" it always came back with the correct server name.
    So perhaps the issue lies with the DNS that your machine is looking up? This would explain why it works on the lan (the DNS is probably your server) and over VPN (again your server is the DNS).
    This may not be the answer to these people's problems, but if you were getting messages such as "Server not found in Kerberos database" in your logs, it may pay to check what is getting return by DNS servers outside your organisation.
    HTH.
    iMac G3   Mac OS X (10.4.8)  

    CharlieJ wrote:
    The problem is this: When any one of the computers is connected to the internet through the DSL none of the others computers is able to connect – I see the message “Connecting through WAN miniport (PPOE)…”, i.e. I am only able to connect to the internet 1 computer at a time.
    As soon as I disconnect from the ‘connected’ computer (desktop or laptop) I am immediately able to successfully connect to the internet on either of the other 2 computers.
    I’ve tried resetting everything – no luck.
    I don’t recall having changed any of the settings and am baffled.
    Any thoughts as to the problem?
    Thanks in advance for any help.
    Charlie
    PS. I haven't called the Verizon DSL Tech Support team yet...but I will soon. I figured on asking here first.
    Ok.
    #1 You must get to the network control panel on your computer.
    One of the ways, for Windows XP is:
    a) Go to Start -> Control Panel -> Network Connections
    b) The screen will look like steps 5 and 6, on http://portforward.com/networking/static-xp.htm
    For Windows Vista:
    a) Go to the globe icon (start button) -> Control Panel -> Network and Sharing Center -> Manage Network Connections.
    b) The screen will look like steps 5, 6, and 7, on
    http://portforward.com/networking/static-vista.htm
    #2 Right click on the WAN miniport (PPPOE), and remove the check mark that says Set as Default Connection.
    ^^
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • How to see my unanswered questions? Some forums missing?

    I miss the old format... Maybe I'm old and stubborn, but this new Apple forums format isn't growing on me - I'm finding it difficult to navigate. Is it possible to customize my view so that I see all of my unanswered questions, and perhaps some select forums?  If not, what's the easiest way to find my open questions - I can't seem to find the link. Also, are all of the forums here or have some been removed/consolidated? Either I'm not searching correctly or they're gone - it seems like some are missing; the old list was much clearer than this scroll-down thing.

    TAAAAAA DAAAAAAAAAAAAA!
    You GO, girl!

  • Some values missing in FAX whereas same drivr program and smartfrm in print

    Hi Experts,
    I have a driver form and smartform in Print and same in fax configured in nace. But there are some values missing in FAX output whereas in print and email it is correct.
    Can anyone help with the reason.
    Thanks

    closed..

  • All text tones are available in General-Sounds. Some are missing via Contacts-Edit Contact.

    I have confirmed that this issue is also present in the iPhones in the Apple store as of 28-April-2014.  I told one of the guys in the Apple store about it and he said that the iPhones in the store have a custom version, so I asked him to check his own iPhone.  He did, and the issue is present on his phone, so it's definintely a general IOS7 iPhone issue.
    If you go to General -> Sounds -> Text Tone -> Classic, you can see all the classic text tones.
    If you go to Contacts, select a contact, select Edit -> Text Tone -> select Classic, some are missing.
    I used Choo Choo for one of my contacts while I was on IOS6 and when I switched to a new phone with IOS7 and performed a restore, their text tone changed to Tri-tone.  I tried to change it back and saw it was not availble, so I figured they had taken it out of IOS7.  Then I heard a friend's iPhone 5 on IOS 7 who had Choo Choo set up as their default.  I investigated and saw that more Classic text tones were available via General.
    Is there some logical reason why some text tones are not available for Contacts?

    Do you maybe have your contacts separated into groups? If so, perhaps you have unchecked the group that the missing contact are in.
    In the Contacts app, click the Groups button in the upper left corner. Make sure all groups have a check mark next to them.

  • The visual Studio Test controller service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs

    We are using VS2013 Premium. i have installed vs2013 Test controller in my dev environment. While i am configuring (https://msdn.microsoft.com/en-us/library/hh546459.aspx) getting error message in
    the Configuration summary dialog box displaying following error's : 1. Failed to Configure TFS Team Project Collection, 2. Could not complete operation as the time out expired. ''
    I have checked the "visual Studio Test controller " in the
    Services --> Administrative. Its automatically stopped the service. When i started the manually its showing message like as 'The visual Studio Test controller
    service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs'
    Please guide me how to resolve this problem. 
    Thanks in Advance...

    Hi Divakar,
    What’s the version of your TFS?
    How do you configure the test control?
    Please make sure you are specify the team collection instead of team project.
    On the other hand, you may enable test controller logs. (You could share the log file on the OneDrive)
    # How to enable test controller logs
    http://blogs.msdn.com/b/aseemb/archive/2009/11/28/how-to-enable-test-controller-logs.aspx
    Regards
    Starain
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • CS4 Extended - Some Icons missing

    Hi there,
    there are some icons missing regarding the control if the opened files ( see attached image link ).
    I tried reinstall but without success.
    http://img383.imageshack.us/my.php?image=iconsle0.jpg
    ANy ideas?
    regards,
    malojo

    I had the same problem. It also caused some issues in CS3 with the selection tools.
    Remove Nik software if it's present in your plugins folder. For me the specific folder that fixed it was named "penpalette." Once I deleted this the icons came back and the program worked much better and more smoothly.

  • UCCX 8.0.2 CCX Engine in service But State Of some services are shutdown

    Hi
    I used UCCX 8.0 for My Contact Center and it works properly but some service of ccx engine as list below are shutdown.
    1. Bootstrap Manager
    2. Log Manager
    3. Cluster Manager
    4. RTP Port Manager
    5. Executor Manager
    Can anyone help me???

    Hi Gergely,
    I read the same forum a answer your about the similar problem: (https://supportforums.cisco.com/thread/2143413) the message error generated in JTAPI is the same:
    %MIVR-SS_TEL-1-SS_OUT_OF_SERVICE:JTAPI subsystem in out of service: Failure reason=A number of route points are OOS
    the documentation cisco site ask to restart the engine (I did exactly to work again) - http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_tech_note09186a0080154fcd.shtml
    There were sync lost, in my understand.
    Thanks,
    Wilson

  • SOLVED: "AuthenticationSupport service missing. Cannot authenticate request."

    A customer was installing CQ5 on a Red Hat Linux environment, and getting the following error displaying in the browser.
    AuthenticationSupport service missing. Cannot authenticate request.
    We checked the Felix Console, and all bundles were installed correctly.
    We did however find the following message in the error log:
    20.06.2012 10:49:26.689 *ERROR* [FelixStartLevel] org.apache.jackrabbit.core.RepositoryImpl failed to start Repository: Unable to register data store in cluster. javax.jcr.RepositoryException: Unable to register data store in cluster.
    Caused by: java.net.UnknownHostException: {server name}: {server name}
    This was not a clustered instance.
    On closer inspection, the error was caused by an incorrect IP address entry for {server name} in the hostnames file
    Tim Goodman

    Hello Mkiti,
        I take a look there and my host file only contains comments :s
        Heres the content:
    # Copyright (c) 1993-2009 Microsoft Corp.
    # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
    # This file contains the mappings of IP addresses to host names. Each
    # entry should be kept on an individual line. The IP address should
    # be placed in the first column followed by the corresponding host name.
    # The IP address and the host name should be separated by at least one
    # space.
    # Additionally, comments (such as these) may be inserted on individual
    # lines or following the machine name denoted by a '#' symbol.
    # For example:
    #      102.54.94.97     rhino.acme.com          # source server
    #       38.25.63.10     x.acme.com              # x client host
    # localhost name resolution is handled within DNS itself.
    #    127.0.0.1       localhost
    #    ::1             localhost
        The error only happen after I install the CQ5 update fix, from package share. I just renamed the crx-quickstart folder, the CQ create a new one and works, but my projects still in the old quickstart :s Is there a way to physically copy these projects, maybe?

  • When starting the AMDS it just says "the apple mobile device service on local computer started then stopped. Some services stop automatically if they are not in use by other services or programs."... help?

    when trying to fix the ipod syncing/recognition by starting the AMD (apple mobile device) in admin tools section on my computer it came up with the message in the question aboce (the apple mobile device service on local computer started then stopped. Some services stop automatically if they are not in use by other services or programs.)
    i have restarted my comp etc and reinstalled itunes... recurrent issue.
    note - i wiped my ipod before this issue occurred, does this affect the problem?

    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Next see the the other actions of the following concerning the AMD
    iOS: Device not recognized in iTunes for Windows

Maybe you are looking for