Some share buttons don't work on my tablet

I have a Samsung tablet, model GT-P3113 and its Operating System is Android. In some websites when I click share buttons like addthis and sharethis, they don't work and are inactive. I refresh the page and it doesn't help. For example, none of share buttons of http://www.threehosts.com/ratings/comparison-software/wordpress-vs-joomla-vs-drupal.html work on my tablet, but when I go to this page via my Laptop the share buttons work. My laptop OS is Windows 8.
One of my friends has iPad and I sent this link to him. The share buttons work correctly for her.
Does my problem come from my Android which doesn't support share plugins perfectly, or it comes from my tablet model?
Is there anyone with Samsung GT-P3113 on this forum? If so, could you please test the mentioned page and tell if its share buttons are active or not?

I have the Samsung Galaxy Tab 2, 7", model GT-P3113, wifi only (not on my Verizon plan). It's currently running Android 4.2.2; the share buttons on the site you listed above seem to work for me...I didn't actually go through and "share" anything, but I did get to this screen and it appears that all I need to do is log in to whatever service I want to use to share the post :

Similar Messages

Clean Install of Windows 8 & Some buttons Don't Work

I bought this PC with dead Hard Drive. I installed new Drive and Windows 8 from USB.It only installed as 32bit OS and I know it should have been 64bit. Has 4Gb memory installed.Property screen shows: 4.00GB (2.97GB usable)(32bit OS, x64 Processor). Some of my buttons Don't Work nor does my Microphone. I have tried verifying all drivers but none fix buttons. No errors listed in Device Manager. Any help is Appreciated.

Wow that is so a "Canned" response. Can't install Windows7 on a system that never had 7. This unit was made originally for Vista. And even those do not have drivers I could use. Now if there were device manufacturer information you could give me about my unit then maybe I can get the buttons to work. The most important is the Microphone and Volume/mute buttons that need to work then you could help me.The Dell site will give you an exact biuld list when serial or Tag number is provided which help Identify device manufacturer so user can goto their site to get generic drivers to work with their Dell PC regardless of what version of OS is currently installed.So if you can really help here is the PC Info»HP TouchSmart IQ524 Desktop PC
Serial Number: 3CR9240GJN
Product Number: NC701AA

Flash buttons don't work

I created my template in Dreamweaver and 9 other pages from
the template. Now I inserted flash buttons in the original template
and linked them to all other pages. Buttons work in the original
template but not in any of other pages, even though I updated the
pages with all the changes. What am I doing wrong??? I am losing my
mind here.
Any help appreciated.
Thanks!

Flash buttons don't work in any real sense of the word,
anyhow. Why are you
using them?
If you want to use Flash for navigation, consider this -
1. Some people don't have Flash installed - what do they do?
2. Search engines don't parse Flash links - your site will
not be spidered
3. Screen assistive devices don't parse Flash links - what
will those users
do?
4. DW cannot maintain links within a Flash movie, so if you
move or rename
a linked file, your navigation will break - what will you do?
It's usually a very bad idea for these reasons...
This problem is due to the fact that you are placing the
buttons into a
Template file. In this case, and assuming you want to inherit
all the
problems, make the links to the buttons ROOT RELATIVE.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"zxh5079" <[email protected]> wrote in
message
news:ga1gp6$qos$[email protected]..
>I created my template in Dreamweaver and 9 other pages
from the template.
>Now I
> inserted flash buttons in the original template and
linked them to all
> other
> pages. Buttons work in the original template but not in
any of other
> pages,
> even though I updated the pages with all the changes.
What am I doing
> wrong???
> I am losing my mind here.
> Any help appreciated.
>
> Thanks!
>

Click wheel and buttons don't work on 5th gen.

I have had my iPod for about half a year and for some reason my iPod buttons don't work. If I move the hold button it turns on but none of the other buttons work. It charges and everything. Does anyone know what to do?
5th generation Windows XP

There isn't any problem with your ipod, theres just a different way of going about when you put video games on your ipod. First, plug in your ipod. when your ipod icon appears on the left side where it usually does, click on it. Look at the top on the ipod screen that appears. The screen should give u info about your ipod. At the top look for an icon that says games. Pictures and a few other things are there but click on games. Once that screen appears click on the check mark that say sync games. After that it is pretty self explanatory. GoodLuck

Portege M750 and Win8.1 Pro -tablet buttons don't work

Hi
I'm having difficulties installing the tablet buttons in WINDOWS 8.1 Pro. Everything else works, perfectly.
In Windows 8 Pro this buttons worked nicely, but now, after a clean install of Windows 8.1 Pro two of the buttons don't work. The buttons are the Toshiba assist button and the presebtation button. I've tried to configure them in Toshiba assist software but nothing happens.
I'm sure I've installed all drivers that made wverything work with Windows 8. As anyone tryed this and add success?

> I'm sure I've installed all drivers that made wverything work with Windows 8
Windows 8.1 is not Windows 8 and many of Toshiba Win 8 drivers and tools dont work or are not fully compatible with Win 8.1
As far as I know the Toshiba does not support Win 8.1 on this Portege M750.
This means that no Win 8.1 drivers will be released and in such case some notebook features like the control buttons could not work properly.
Fact is that using Windows Vista or Win 7, such buttons were controlled by Value Added Package. This package does not exist for Win 8.1 and has been replaced by other software called Toshiba System Driver
So in case you want to try to get the buttons to work, I recommend checking this with Toshiba System Driver

Buttons don't work

I am working on a small application.
My main frame is a public class that defines two buttons in its constructor one for input and the other for feedback.
The input screen and the feedback screens are defined as inner listener classes of the main class.
The code compiles fine but the buttons don't work.Please take a look at my code and make suggestions for what I am doing wrong
Thanks
import java.awt.*;
import java.awt.event.*;
public class project1 extends Frame {
static Object source;
static Button input, feedback, apply;
public project1(){
super("Project Development Coordination System");
setSize(500,500);
setLayout(new BorderLayout());
//Build and add 1st Panel of project1
Panel p1 = new Panel(new BorderLayout());
TextField Title = new TextField();
Title.setFont(new Font("Sansserif", Font.BOLD, 48));
Title.setText("HORNSONIC");
Title.setEditable(false);
TextField Name = new TextField();
Name.setFont(new Font("Sansserif", Font.BOLD, 30));
Name.setText("Hera International, Inc.");
Name.setEditable(false);
p1.add(Title, BorderLayout.NORTH);
p1.add(Name, BorderLayout.CENTER);
add(p1, BorderLayout.NORTH);
//Build and add 2nd Panel
Panel PDCS = new Panel();
TextField pdcs = new TextField();
pdcs.setFont(new Font("Sanserif", Font.BOLD, 22));
pdcs.setText("Project Development Coordination System");
pdcs.setEditable(false);
PDCS.add(pdcs);
add(PDCS, BorderLayout.CENTER);
//Build and add 3rd Panel
Panel buttons = new Panel();
Button input = new Button("INPUT");
buttons.add(input);
Button feedback = new Button("FEEDBACK");
buttons.add(feedback);
input.addActionListener( new Input());
feedback.addActionListener(new Feedback());
add(buttons, BorderLayout.SOUTH);
addWindowListener(new WindowAdapter(){
public void windowClosing(WindowEvent event){
     System.exit(0);
//end of project1()
//Input class
static class Input extends Frame implements ActionListener {
          Input(){
super("Input");
setSize(500,500);
//Build and add FirstPanel of the Frame
Panel FP = new Panel(new BorderLayout());
//Build and add northpanel of FP
Panel np = new Panel(new BorderLayout());
//Build and add subpanel1 of np
Panel subpanel1= new Panel();
Label L1 = new Label("Sample#");
TextField T1 = new TextField(10);
T1.setEditable(true);
Label L12 = new Label("Customer:");
TextField ctf = new TextField(10);
ctf.setBackground(Color.gray);
ctf.setForeground(Color.black);
ctf.setEditable(true);
subpanel1.add(L1);
subpanel1.add(T1);
subpanel1.add(L12);
subpanel1.add(ctf);
//Build and add subpanel2 of np
Panel subpanel2 = new Panel();
TextField sub1t = new TextField(10);
sub1t.setBackground(Color.gray);
sub1t.setForeground(Color.black);
sub1t.setEditable(true);
subpanel2.add(sub1t);
Label sublabel = new Label("Model#");
subpanel2.add(sublabel);
TextField sub2t = new TextField(10);
sub2t.setBackground(Color.gray);
sub2t.setForeground(Color.black);
sub2t.setEditable(true);
subpanel2.add(sub2t);
np.add(subpanel1, BorderLayout.NORTH);
np.add(subpanel2, BorderLayout.CENTER);
FP.add(np, BorderLayout.NORTH);
//Build and add centerpanel of FP
Panel cp = new Panel(new BorderLayout());
//Build and add subcenter1 of centerpanel
Panel subcenter1 = new Panel(new BorderLayout());
Panel NP = new Panel();
Label Project = new Label("Project Scope");
NP.add(Project);
TextField PS = new TextField(10);
PS.setBackground(Color.gray);
PS.setForeground(Color.black);
PS.setEditable(true);
NP.add(PS);
Label Appl = new Label("Application:");
NP.add(Appl);
TextField Price1 = new TextField(10);
Price1.setBackground(Color.gray);
Price1.setForeground(Color.black);
Price1.setEditable(true);
NP.add(Price1);
subcenter1.add(NP, BorderLayout.NORTH);
Panel CP = new Panel();
Label TP = new Label("Target Price-");
CP.add(TP);
TextField appl = new TextField(10);
appl.setBackground(Color.gray);
appl.setForeground(Color.black);
appl.setEditable(true);
CP.add(appl);
Label quote = new Label("Quoted Price-");
CP.add(quote);
TextField Q = new TextField(10);
Q.setBackground(Color.gray);
Q.setForeground(Color.black);
Q.setEditable(true);
CP.add(Q);
subcenter1.add(CP, BorderLayout.CENTER);
cp.add(subcenter1, BorderLayout.NORTH);
//Build subcenter panel of cp
Panel subcenter = new Panel(new GridLayout(1,3));
List list = new List (3,true);
list.addItem("Woofer:");
list.addItem("Mid:");
list.addItem("Tweeter");
subcenter.add(list);
TextArea inches = new TextArea(3,5);
inches.setBackground(Color.gray);
inches.setForeground(Color.black);
inches.setEditable(true);
subcenter.add(inches);
List list1 = new List(3, true);
list1.addItem("Count-");
list1.addItem("Count-");
list1.addItem("Count-");
subcenter.add(list1);
TextArea count = new TextArea(3,5);
count.setBackground(Color.gray);
count.setForeground(Color.black);
count.setEditable(true);
subcenter.add(count);
List list2 = new List(3, true);
list2.addItem("Materials:");
list2.addItem("Materials:");
list2.addItem("Materials:");
subcenter.add(list2);
TextArea materials = new TextArea(3,5);
materials.setBackground(Color.gray);
materials.setForeground(Color.black);
materials.setEditable(true);
subcenter.add(materials);
cp.add(subcenter, BorderLayout.CENTER);
FP.add(cp, BorderLayout.CENTER);
//Build and add southpanel of FP
Panel sp = new Panel();
TextArea comments = new TextArea("Comments:", 3,30);
sp.add(comments);
FP.add(sp, BorderLayout.SOUTH);
add(FP, BorderLayout.NORTH);
//Build and add SouthPanel of Frame
Panel SP = new Panel();
List l1 = new List(8,true);
l1.addItem("Quote Requested:");
l1.addItem("Quote to be completed by:");
l1.addItem("Sample Requested:");
l1.addItem("STd sent to Factory:");
l1.addItem("Factory estimated ETD:");
l1.addItem("Revised ETD#1:");
l1.addItem("Revised ETD#2:");
l1.addItem("Revised ETD#3:");
SP.add(l1);
TextArea dates1 = new TextArea(8,8);
dates1.setBackground(Color.gray);
dates1.setForeground(Color.black);
dates1.setEditable(true);
SP.add(dates1);
List l2 = new List(8, true);
l2.addItem("Days Quote overdue:");
l2.addItem("Date Quote Received:");
l2.addItem("Actual ETD:");
l2.addItem("Sample Arrival Date:");
l2.addItem("Days Sample overdue:");
l2.addItem("Days in Development:");
l2.addItem("Date sent to customer:");
l2.addItem("Actual Days to customer:");
SP.add(l2);
TextArea dates2 = new TextArea(8,8);
dates2.setBackground(Color.gray);
dates2.setForeground(Color.black);
dates2.setEditable(true);
SP.add(dates2);
add(SP, BorderLayout.SOUTH);
//Build and add CenterPanel of Frame
Panel TD = new Panel();
TextField td = new TextField("TIME IN DEVELOPMENT");
TD.add(td);
add(TD, BorderLayout.CENTER);
          addWindowListener(new WindowAdapter(){
public void windowClosing(WindowEvent event){
     System.exit(0);
}// end of input()
public void actionPerformed(ActionEvent Event)
Object source = Event.getSource();
if (source == input){
               new Input();
               setVisible(true);
}//end of input if
          }//end of actionPerformed.
     }//end of class input
//Feedback class
static class Feedback extends Frame implements ActionListener{
Feedback(){
super("Feedback");
setSize(500,500);
//Build and add panel 1.
Panel p1 = new Panel(new BorderLayout());;
//Build and subpanel off panel 1
Panel subpanel1= new Panel();
Label L1 = new Label("Sample#");
TextField T1 = new TextField(10);
T1.setEditable(true);
Label L12 = new Label("Customer:");
TextField ctf = new TextField(10);
ctf.setBackground(Color.gray);
ctf.setForeground(Color.black);
ctf.setEditable(true);
subpanel1.add(L1);
subpanel1.add(T1);
subpanel1.add(L12);
subpanel1.add(ctf);
Panel subpanel2 = new Panel();
TextField sub1t = new TextField(10);
sub1t.setBackground(Color.gray);
sub1t.setForeground(Color.black);
sub1t.setEditable(true);
subpanel2.add(sub1t);
Label sublabel = new Label("Model#");
subpanel2.add(sublabel);
TextField sub2t = new TextField(10);
sub2t.setBackground(Color.gray);
sub2t.setForeground(Color.black);
sub2t.setEditable(true);
subpanel2.add(sub2t);
p1.add(subpanel1, BorderLayout.NORTH);
p1.add(subpanel2, BorderLayout.CENTER);
add(p1, BorderLayout.NORTH);
//Build and add Panel 2
Panel p2 = new Panel(new BorderLayout());
//Build and add subcenter1 of Panel 2.
Panel subcenter1 = new Panel(new BorderLayout());
//Build subpanels of subcenter 1.
Panel NP = new Panel();
Label Project = new Label("Project Scope");
NP.add(Project);
TextField PS = new TextField(10);
PS.setBackground(Color.gray);
PS.setForeground(Color.black);
PS.setEditable(true);
NP.add(PS);
Label Appl = new Label("Application:");
NP.add(Appl);
TextField Price1 = new TextField(10);
Price1.setBackground(Color.gray);
Price1.setForeground(Color.black);
Price1.setEditable(true);
NP.add(Price1);
subcenter1.add(NP, BorderLayout.NORTH);
Panel CP = new Panel();
Label TP = new Label("Target Price-");
CP.add(TP);
TextField appl = new TextField(10);
appl.setBackground(Color.gray);
appl.setForeground(Color.black);
appl.setEditable(true);
CP.add(appl);
Label quote = new Label("Quoted Price-");
CP.add(quote);
TextField Q = new TextField(10);
Q.setBackground(Color.gray);
Q.setForeground(Color.black);
Q.setEditable(true);
CP.add(Q);
subcenter1.add(CP, BorderLayout.CENTER);
p2.add(subcenter1, BorderLayout.NORTH);
//BUILD and add subcenter to Panel 2);
Panel subcenter = new Panel();
List list = new List (3,true);
list.addItem("Woofer:");
list.addItem("Mid:");
list.addItem("Tweeter");
subcenter.add(list);
TextArea inches = new TextArea(3,5);
inches.setBackground(Color.gray);
inches.setForeground(Color.black);
inches.setEditable(true);
subcenter.add(inches);
List list1 = new List(3, true);
list1.addItem("Count-");
list1.addItem("Count-");
list1.addItem("Count-");
subcenter.add(list1);
TextArea count = new TextArea(3,5);
count.setBackground(Color.gray);
count.setForeground(Color.black);
count.setEditable(true);
subcenter.add(count);
List list2 = new List(3, true);
list2.addItem("Materials:");
list2.addItem("Materials:");
list2.addItem("Materials:");
subcenter.add(list2);
TextArea materials = new TextArea(3,5);
materials.setBackground(Color.gray);
materials.setForeground(Color.black);
materials.setEditable(true);
subcenter.add(materials);
p2.add(subcenter, BorderLayout.CENTER);
//Build and add south subpanel of Panel 2
Panel subpanel = new Panel();
Label L2 = new Label("Sample Disposition:");
subpanel.add(L2);
TextField T2 = new TextField(10);
T2.setEditable(true);
subpanel.add(T2);
Label l2 = new Label("Date:");
subpanel.add(l2);
TextField t2 = new TextField(10);
t2.setEditable(true);
subpanel.add(t2);
TextArea TF = new TextArea("Feedback:",3,30);
TF.setEditable(true);
subpanel.add(TF);
p2.add(subpanel, BorderLayout.SOUTH);
add(p2, BorderLayout.CENTER);
//Build and add Panel 3.
Panel p3 = new Panel();
Label L3 = new Label("Project Continued on Revision#:");
TextField T3 = new TextField(10);
T3.setEditable(true);
Label l3 = new Label("Order Placed:");
TextField t3 = new TextField(10);
t3.setEditable(true);
p3.add(L3);
p3.add(T3);
p3.add(l3);
p3.add(t3);
add(p3, BorderLayout.SOUTH);
setVisible(true);
addWindowListener(new WindowAdapter(){
public void windowClosing(WindowEvent event){
     System.exit(0);
}//end of Feedback()
public void actionPerformed(ActionEvent AE){
if (AE.getSource() == feedback){
new Feedback();
     setVisible(true);
}//end of feedback if
}//end of actionPerformed
}//end of class Feedback
public static void main (String args[]){
     project1 window = new project1();
     window.setVisible(true);
     //end of main
}//end.

I compiled and did run your code....
it seems you are trying to implement a Frame with two buttons... each time the user click on a button, the main frame displays the equivalent panel with a set of components .. isn�t it ?
well... some tips:
1 - Why don�t you use a JTabbedPane ? a much better container than a simple Frame....
2 - If you really need to use a Frame as a container of multiple forms.. then you should take a look in the java.awt.CardLayout
other tip: don�t use the Frame component as the same class as the ActionListener.. divie these comopnents in two classes...

Satellite A300-1JH PSAGLE: Control buttons don't work with XP

Hello there.
I own a Toshiba Satellite A300 psagle.
It works beautifully, but there is a problem: the tactile music buttons don't work.
I am using Windows XP and I have installed all the drivers available.
Could some one please tell me what I should do.
P.s. how can I activate the "face recognition" option?
Please reply.
Regards.

Hi
Regarding the Toshiba Control Media buttons;
You have to install the Toshiba Controls from the Toshiba European driver page.
Check there the Satellite A300 PSAG8E series and download the Toshiba Controls
Regarding the face reorganization:
Check these threads:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=127846&#127846
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=131453
Bye

:*( Form buttons don't work for all testers

I created a form in Acrobat 9.1 using Forms> Add or Edit Fields. The form contains action buttons for next page and previous page, to clear all fields, and (with the generous help of a fellow forum member) to print the form and save it to disk. I optimized the form with compatibility set to Acrobat 8.0 and later, then enabled it for Reader. I sent this form to several users for testing.
Those using Acrobat have no problems with it.
Those using Foxit Reader have no problems with the action buttons or the form fields (except that date fields are finicky; Foxit doesn't convert the dates to the correct format the way Reader or Acrobat do). But, the yellow background that I created as a watermark -- so I could make it visible but not print -- is printing. That's not anything that Acrobat can help, but it is a very good reason to not recommend using Foxit. It would create a dreadful shortage of yellow inkjet ink.
Those using Reader 8.0 to 8.1.2 are having several problems. For them, the action buttons don't work... except the "clear all fields" one. The buttons don't do anything; there are no errors, no messages, no activity of any kind except to change color when clicked.
The buttons that don't work are all set up as Mouse Up actions executing a menu item... for example, "Go to page 2" is just View>Go To>Next Page. The "Clear all fields" button is, on Mouse Up, "Reset a form" with all fields selected... so it's the only kind of button that works for Reader users, and it's the only button that doesn't execute a menu item.
Why is there a difference in actions these users can run? If it's a security issue... what possible risk is there in going to the next page, using a button instead of a scroll bar or Page Down key??? I can find no common sense here, especially because Reader users are the only ones barred from these form actions. Everyone else can use them.
-- Also, these testers (Reader 8+) are having problems with the tab order. Some of the radio button groups (which have no more than three options, Yes, No and NA) at first appear to be tabbing correctly, because the Yes option receives focus in the correct order... but randomly, tabbing through several fields, suddenly the No option will get focus... in a radio button group nowhere near the current tab location. Tabbing is rendered useless, then, because these anomalies are unpredictable and it doesn't appear there's anything I can do to prevent this from happening.
It's pointless to delete and re-add the afflicted radio buttons. That has no effect... and the radio button groups are already in the correct order anyway. I don't know how this could possibly happen... But it doesn't happen for the Foxit or Acrobat testers.
• Why would Reader be the only app that can't use the buttons and can't tab through the fields correctly? I'd think Adobe's own software would work best with their own file format. •
Is Reader 8 the problem --- should those users all update to the newest version? I don't have any Reader 9+ testers yet. Nobody seems interested in it. The testers all assume the problems are MY fault, so nobody's happy with me and no one wants to bother testing the forms because there's always something wrong.
<hair-pulling> I seriously regret upgrading to Acrobat 9.1. I know other forum members who agree this thing is catastrophically buggy -- I've wasted weeks trying to iron out all the problems I've been having with these forms, forms that should have been quick and simple to create, and in past versions of Acrobat, would have been. Yet I'm still tearing out my hair over tab order! Worse, I fear I'm close to losing my job for all the time wasted and all the projects I've fallen behind in because of this. <no /hair-pulling in sight>

I have no clue, but it might make a difference depending on the form being produced in Acrobat versus Designer. Acrobat will take you both places and one of them may have an issue with backward compatibility. I have not heard of that, but it is a possibility.

Chrome, buttons don't work suddenly, Captivate 7 html5

Chrome, buttons don't work. Captivate 7, why did buttons suddenly stop working in chrome (and click boxes too.) HTML5
I installed the patch in June. Since then I made a lesson and published it to a Moodle server. It works in IE and Chrome fine.
Lessons from 2013 work fine still on that server.
New lesson from a different template works in IE but not in Chrome. End user can't get audio in IE, would use Chrome but buttons don't work! You can see the html selection box and they depress(plain buttons, can see the overlay when you click) but they don't take any action. I can click and type in a text box if that helps?
So I created a couple of test projects:
one from the new 2014 template, copied over some 2013 slides and buttons.
One from 2013 template, copied in some 2014 slides and buttons.
Good mix of each. Made export settings match.
Posted to Moodle in new course. Posted to old course, to make sure it wasn't Moodle related, they are on the same server.
Two variations every way I could.
Buttons do not work in Chrome. Everything works in IE.
I had created an extra lesson for the 2013 course this month and posted it with the same software to the same server, that works in Chrome.
It was made after a software update (to 701-237 June 2014, Windows system, hasn't changed since).
Then I opened, republished and uploaded a lesson from last year. Doesn't work in Chrome. ?!?
What happened to my BUTTONS! I don't know what else to try.
ps Moodle was getting a manifest error when i tried to publish as scalable html. Moodle takes it when I don't.
Yes I deleted the layouts folder when I updated. Did it again today to be sure. No improvement.

Hey there's a solution to this (he says answering his own question)
Someone else posted earlier that latest version of Chrome hung and buttons didn't work (I hate Adobe forum search since I know I checked keywords before posting mine, but whatever)
https://forums.adobe.com/message/6573330#6573330
They got a response:
http://captivatedev.com/2014/07/20/html5-captivate-projects-freezing-google-crome-v-36/
that has to do with two deprecated functions being removed by new Chrome, affecting Javascript.
http://blogs.adobe.com/captivate/2014/07/update-on-captivate-html-5-content-playback-issue -in-google-chrome-browser.html
Offers a manual fix and also updated that page with link to an adobe fix:
So you can patch Captivate 7 and 8 and make Chrome your friend again!
I've just installed it and previewed a project in my default (Chrome) browser. Success!

Satellite A300-1GN - Media buttons don't work with Win 7

Hei
I installed windows 7 to my Toshiba satellite a300 1gn, Short Model No: psagce and some illuminated media buttons don't work.
i have the latest drivest but still nothing. first button is should controll the illumination for media buttons, touch pad and Satellite logo.
second button should open media player or something like that. the other fore buttons work fine!
Could someone helt me solve my problem?

Hi
You have to configure the single buttons.
This Toshiba button support pop up will appear if the pressed button was not configured.
So press the button and then assign the action, application.
You have to expand this menu pressing on the small arrow on the right.
Greets

I just downloaded Yosemite OS for mac and Premier pro play buttons don't work in the Program, Source and timeline and no audio HELP?

Yosemite OS seem so not allow me to use premier pro. Specifically the play buttons don't work in the source, program and Timeline. Any one have this problem?

Hey,
I´ve got the same problem, that since i upgrade to Yosemite, my R3D Video Files are not longer supported, sometimes it works but most of time it says "not supported File format".. Hope Adobe will fix it.
Play button works. Try installing the latest Java 8 update. This might fix some problems.

Satellite A300-1G5 PSAG4E - Multimedia Buttons don`t work properly

My multimedia buttons don`t work properly any more. I`m talking abut the first 2 buttons (Mute and Media Player - buttons).
I just tried to reinstall VAP but it`s the same. I must say i can use Mute button but it won`t shows up that icon for mute.
The Media player button doesen`t work at all.
I just tried to search on this form for a sollution but i couldn`t find it.
All the rest of the buttons (play/pause, stop, next, previews) are working just fine.
As far as i remember 2 days ago all my multimedia buttons worked perfectly.
In this time i didn`t reinstalled OS or any other drivers.
I`m using the last version of BIOS (downloaded from toshiba website) and Windows 7 Ultimate. I have a Toshiba Satellite A300 - 1G5 PSAG4E.
Can you give me some advices about that pls?
Message was edited by: blunthlox

Solved. I used a system restore at yesterday`s date and it`s ok now.

Share button doesn't work

My share button doesn’t work on safari 6.0.2 with Mountain Lion (10.8.2) when i try to share a link to facebook, but it already work.

You have to remove imovie from the mac and some components found in the following place:
Receipts:
/Library/Receipts/iMovie.pkg
/Library/Receipts/iMovieUpdater3.0.3.pkg
/Library/Receipts/iMovieUpdater4.0.1.pkg
/Library/Receipts/iMovieHD502.pkg
/Library/Receipts/iMovieThemes.pkg
/Library/Receipts/iMovieThemes_Tiger.pkg
/Library/Receipts/iMovie_601.pkg
/Library/Receipts/iMovie_711.pkg
/Library/Receipts/iMovie_HD6.pkg
so drag imovie to the trash and remove the receipts of imovie from the system library
than reinstall itunes from the app store

Ok I have an fully upgraded iPad 2 and the volume button don't work but it do with headphones can someone help

Ok I have an fully upgraded iPad 2 and the volume button don't work but it do with headphones can someone help. I try to go to settings and the volume won't go up there either I have the home button gesture and still the same. I try resting my iPad and nothing no sound work unless I have my headphones in. Do anybody know how to fix this

Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore

Rotating Menu - Buttons don't work inside MC's

Hello,
This is my first post here and it would be great if I could
have your help to solve this little problem:
Flash CS3 | AS2 | Rotating Menu
I'm creating a small animation in which I have a clock-like
rotative menu.
I found the code for this in the internet and made some few
adjustments (mainly just took somethings I didn't needed out)
In my file I have 6 circles that are all movieclips that make
part of a circular menu that rotates everytime you click on one of
the circles. Those movieclips are not on the stage, only on the
library, and are being "pulled" into action by the actionscript.
I need those movieclips to act as menu buttons, so I made a
button inside each one of them.
The problem is that the buttons don't work. They don't do
what they are suppose to (load another movieclip). The solution
must be quite simple because it doesn't make sense not to work, but
I'm unable to get it...
In the original file they worked as buttons that linked to an
URL but I removed that because I didn't need it. Just need them to
act as normal buttons and play another MC...
Do you have any idea why this happens?
Does it have anything to do with the fact that the circle
movieclips that contain the buttons are not actually on the stage?!
The code I'm using in the buttons is rather simple:
on(release){
movie1.play();
I would appreciate your help on this!
Thank you,

Hi Odisey2,
I appreciate the time you took to try to help me!
I only have 1 frame in my stage, and its the one that
contains the actioscript code.
I also have on stage the MC i'm trying to make the button
play. The first frame of that MC is empty and has a stop, so that
its not visible at first.
Then I wanted that when you click the button (the onde that
is inside the MCs that are being "pulled" by the code I sampled) it
would play that MC on stage.
The code I'm using in the burron is pretty simple:
on(release){
movie1.play();
I've tried to put "_root" before, like this: "_root.movie1"
but it doesn't work as well.
Any other idea?
Do you think it has anything to do with the fact that the
circle movieclips that contain the buttons are not actually on the
stage?!
Thanks,

Some share buttons don't work on my tablet

Similar Messages

Maybe you are looking for