Some simple error while booting time
while inastalling on x11 i am getting error mesg
host sendmail " 717 : mu unqualified hostname abc unknown sleeping for retry
host sendmail "717 unable qualified my own domain name --using at
what is this error and what have to do
Dear Lion - o
I accept your words but there is no DNS domiain setup,
It's a simple intel PC where we are loading Solaris 10 for R&D.
After the OS is loaded when we restart the pc after some booting process we are getting this error message that
Unqualified HOST name
But probably the message flashes for twice or thrice and the system proceeds booting further
BUt how to prevent this message from poping up every time we restart our system and if there is any entry that we need to put in any file.lets explain me the same if there is so
Regds
Suseendran .A
919213540324
Similar Messages
-
I'm getting this error while booting:
Waiting for UDev uevents to be processed
[ 3.631701] usb 1-1.1: unable to read config index 0 descriptor/all
[ 3.631811] usb 1-1.1: can't read configurations, error -32
[ 3.643141] hub 1-1:1.0: unable to enumerate USB device on port 1
I saw other thread in this forum but i can't find any solutions because I have no USB plugged in. Any suggestions?
Last edited by quiro91 (2012-06-26 09:17:08)rc.conf -> http://pastebin.com/eJTXVt1L
mkinitcpio.conf -> http://pastebin.com/u90UQ8kt
udev is actually after base. I'm going to try linux-lts now, I'll let you know, and obviously thanks for your help
EDIT: using lts kernel, I rebooted 5 times and everything works fine, no error message at all
DSpider wrote:
Post these files (preferably using pastebin.com):
/etc/rc.conf
/etc/mkinitcpio.conf
"udev" should be after "base". For example:
HOOKS="base udev autodetect pata scsi sata usbinput filesystems fsck"
Then regenerate your initramfs:
# mkinitcpio -p [your linux preset, since you're using linux-ck... I don't know]
For the kernel from the [core] repo, it's:
# mkinitcpio -p linux
Speaking of kernels, does it happen with linux-lts too?
Last edited by quiro91 (2012-06-26 15:52:15) -
Installing Arch Linux on USB key: error while booting
Hello,
first of all, I must say I've followed the steps from this article on arch wiki to install archlinux on my USB key: https://wiki.archlinux.org/index.php/In … _a_USB_key
So what I did is to use one of my 2 usb keys to INSTALL linux, and the second one to RUN linux. I used dd to write on the 1st usb, eveything worked fine when booting, then I do install arch on the my second usb following the stept from the link above, everything works until I get this error while booting (at the middle):
Waiting 10 seconds for device /dev/sdc/
Root device '/dev/sdc' doesn't exist. Attempting to create it.
ERROR: Unable to determine major/minor number of root device '/dev/disk/by-uuid/lotsofnumbers'
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
/bin/sh: Can't contact tty; job control turned off
[ramfs /]#
To summarize I'll show you my conf files that could help you to resolve my problem:
/etc/fstab.conf
/dev/sdc1 /boot ext2 defaults 0 1
/dev/sdc2 / ext3 defaults 0 1
/dev/sdc3 /home ext3 defaults 0 1
So here I've sdc1 boot 32MB partition; sdc2 root 3GB partition; sdc3 home 978MB partition for a total of 4GB USB key~
I didn't make a swap partition as in the tutorial they are writing it's unnecessary for some kind of reasons.
/etc/mkinitcpio.conf
HOOKS="base udev usb autodetect pata scsi sata filesystems"
I've added to here, "usb" to the hooks
installed GRUB on my sdc, here is the menu.ist:
# (0) Arch Linux
title Arch Linux (USB)
root (hd0,0)
kernel /vmlinuz26 root=/dev/sdc ro vga=773
initrd /kernel26.img
So, I boot GRUB without problems, start Arch Linux, but then I got this error above.
I've searched alot on some forums and read many stuffs, but sitll can't fix it and it seems complicated.
I've tried to boot with UUID, also, but didn't make difference. I tried to remove some parameter from the hooks, but unfortunately this wasn't working still. I've read somewhere to use chroot, but I didn't catch on how to do that and what was the use of chroot, I'm still noob user of arch linux and currently learning. Maybe it's the problem, as some forum were talking about creating a new image, but I still don't know how to make it. By the way, I'm not sure this could have fixed my current problem. I've also read somewhere it could be due to my lack of space, but I wrote you how I did partition my USB key, let me know if you have any suggestion please.1. What I did is re-installing entirely from my installation disk or USB to test out different setting in my config files, because I don't know how to edit my .conf as I can't really finish to boot to the end and get in terminal mode? If there is a quicker way to edit files from any terminal to go into my current USB sdc to modify directly my file from there, I'd enjoy probably. So rebuilding the initpio, no, I just re-installed to test out different configs.
2. Yes, same error.
3. Tested out by-id/by-path and uuid = no difference
4. Didn't know about larch, it seems to be a nice tool, I'll check it out -
error while booting maverick
The most likely causes of this error are:
1) Failing to execute tmloadcf after updating the UBBCONFIG file.
2) Failing to set TUXDIR correctly in the UBBCONFIG file.
3) Failing to set TUXCONFIG, PATH, or
LD_LIBRARY_PATH(Unix)/SHLIB_PATH(HP)/LIBPATH(AIX) correctly in your
enviroment.when executing tmboot or tlisten.
You should verify that your environment is set correctly and you should
execute tmunloadcf to see the contents of the configuration file that has
been loaded.
Ed
<Kaustubh Deoghare> wrote in message news:[email protected]..
Hello,
I am getting following error while booting tuxedo
exec TMS_ORACLE8I -A :
TMS_ORACLE8I: symbol lookup error: TMS_ORACLE8I: undefined symbol:
kgsmp789_compat_
CMDTUX_CAT:819: INFO: Process id=2568 Assume started (pipe).
Though I have installed Oracle9i, in ubbconfig it is still taking
TMS_ORACLE8I and hence trying to access Oracle8i library files.
Pl suggest in this regard
Thanx in advance -
Getting BSOD error while booting
Hi,
I am getting BSOD error while booting using bootable pendrive.
Could you guys please provide the possible solution
Regards,
ChandanHello,
To troubleshoot the issue, you need review the dump file. We may find out the which file or driver is triggering a BSOD. And in most cases, BSOD is triggered by driver issue.
Are you doing OS deployment via bootable pendeivce? How do you created the boot image?
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
I have installed a PCI audio card and its driver. While booting
I am getting following error
pcipsy: WARNING: pcipsy0: ino 23 is invalid
pcipsy: WARNING: pcipsy0: ino 10 is invalid
Can any one tell me what is causing this pci error?
ThanksThe most likely causes of this error are:
1) Failing to execute tmloadcf after updating the UBBCONFIG file.
2) Failing to set TUXDIR correctly in the UBBCONFIG file.
3) Failing to set TUXCONFIG, PATH, or
LD_LIBRARY_PATH(Unix)/SHLIB_PATH(HP)/LIBPATH(AIX) correctly in your
enviroment.when executing tmboot or tlisten.
You should verify that your environment is set correctly and you should
execute tmunloadcf to see the contents of the configuration file that has
been loaded.
Ed
<Kaustubh Deoghare> wrote in message news:[email protected]..
Hello,
I am getting following error while booting tuxedo
exec TMS_ORACLE8I -A :
TMS_ORACLE8I: symbol lookup error: TMS_ORACLE8I: undefined symbol:
kgsmp789_compat_
CMDTUX_CAT:819: INFO: Process id=2568 Assume started (pipe).
Though I have installed Oracle9i, in ubbconfig it is still taking
TMS_ORACLE8I and hence trying to access Oracle8i library files.
Pl suggest in this regard
Thanx in advance -
BSOD Error while booting Thinkpad L440
Link to image
Hi All,
I'm getting a BSOD Error while booting my Lenovo Thinkpad L440 system.
Please help.
Moderator note: large image(s) converted to link(s): About Posting Pictures In The ForumsHello,
To troubleshoot the issue, you need review the dump file. We may find out the which file or driver is triggering a BSOD. And in most cases, BSOD is triggered by driver issue.
Are you doing OS deployment via bootable pendeivce? How do you created the boot image?
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Satellite M40-256 - error while booting via CD
Hello,
a well-known friend owns Satellite M40-256 which has Windows problem (error while updating/handling by her children).
She doesn't own an external Toshiba FDD or ODD. Also this portable has no built-in FDD. Buying one only for this issue? NO
The boot priority has been changed to: CD-network-HDD.
I've tried another non Toshiba branded ODD (in BIOS not mentioned/found)
The original ODD works/boots in another pc (via adapter) very great.
Ive tried several CD/DVDs to boot from (no error displayed): instant-Linux like knoppix, suse, other windows CDs, recovery CD, ... no success
Every time the same result: the laptop has a black screen, the ODD speeds up and after about 3 to 5 seconds windows starts with the black-white progress bar.
I also tried to press C to force booting from CD.
Some time ago, I had only access to windows in secured mode. But after uninstalling some updates it ends in a licence problem. This issue can be only solved by booting windows-cd via cd.
It has a Toshiba bios 1.00 (interesting, seems quite old).
I've trying at the moment to boot via network. Does the Toshiba show some messages about succeeding/failing at boot via network or CD?
Has setting the execution bit an influence on behaviour?
Does anybody know a solution booting windows?
Thanks in advanceThanks for help.
I will look for an other ODD from Toshiba trying for boot.
Does the toshiba bios show messages about booting via cd or network? Even choosing network ends in a faulty Windows boot.
After choosing an item there's no message while booting
As I mentioned: the most interesting issue is ODD works/boots well via adapter in a normal pc and also after windows has been started (secured mode). But no boot possible.
I suspect meanwhile BIOS or Mainboard. But is there a chance for update in secured mode? (the only thing it starts is "secured with prompt"). Cats bites itself in tail.
BIOS also was saved with default setup. Nothing changed.
In event viewer I've found entry about probs with hard-drive and controller.
Does a destructive data processing influence the toshiba bios -
Error while creating Time Card Using API
Hello
I have a requirement to run OTL Interface once day to create/update Time Card in OTL for those datea created on sysdate-1 in Service Module (data will get feeded from Service Module). For example this interface will run on sysdate to create time cards for those data created in the service module on sysdate-1.
I have some sample data and code I am using but it is erroring out with different errors..Can anybody help me on this
My Interface should run as expected below and my time card range will be Monday 24-Dec-2012 to Sunday 30-Dec-2012
Interface Run Date Time Entry to process
25-Dec-2012 24-Dec-2012 Data
26-Dec-2012 25-Dec-2012 Data
CREATE OR REPLACE PROCEDURE main_process (o_errbuf OUT VARCHAR2,
o_ret_code OUT NUMBER,
l_chr_from_date IN VARCHAR2,
l_chr_to_date IN VARCHAR2)
IS
l_chr_skip VARCHAR2 (1);
l_chr_task_exists VARCHAR2 (100);
l_chr_error_msg VARCHAR2 (4000);
l_num_tbb_id NUMBER;
l_num_request_id NUMBER := fnd_global.conc_request_id;
l_num_login_id NUMBER := fnd_global.login_id;
l_num_user_id NUMBER := fnd_global.user_id;
l_num_resp_id NUMBER := fnd_Profile.VALUE ('resp_ID');
l_num_otl_appl_id CONSTANT NUMBER (3) := 809; -- This is the appl_id for OTL, do not change
l_chr_proj_attr1 CONSTANT VARCHAR2 (7) := 'Task_Id';
l_chr_proj_attr2 CONSTANT VARCHAR2 (10) := 'Project_Id';
l_chr_proj_attr3 CONSTANT VARCHAR2 (16) := 'Expenditure_Type';
l_chr_proj_attr4 CONSTANT VARCHAR2 (19) := 'Expenditure_Comment';
l_chr_proj_attr5 CONSTANT VARCHAR2 (23) := 'SYSTEM_LINKAGE_FUNCTION';
i_num_count NUMBER;
i_num_rows_inserted NUMBER := NULL;
l_chr_message fnd_new_messages.MESSAGE_TEXT%TYPE;
l_chr_hdr_eligible VARCHAR2 (5);
l_tbl_timecard_info hxc_self_service_time_deposit.timecard_info;
l_tbl_attributes_info hxc_self_service_time_deposit.app_attributes_info;
l_tbl_messages hxc_self_service_time_deposit.message_table;
l_new_timecard_id NUMBER;
l_new_timecard_ovn NUMBER;
l_num_time_building_block_id hxc_time_building_blocks.time_building_block_id%TYPE;
I NUMBER; --PENDING REMOVE
l_message VARCHAR2 (2000); --PENDING REMOVE
l_time_building_block_id NUMBER; --PENDING REMOVE
CURSOR process_line
IS
SELECT ROWID ROW_ID, a.*
FROM xxpowl.xxpowl_hxt_otl_intf a
WHERE 1 = 1 --a.request_id = l_num_request_id
AND a.status_flag = 'NEW' -- 'VALID'
AND a.error_desc IS NULL
AND a.service_activity_type IS NOT NULL;
BEGIN
FND_FILE.PUT_LINE (
fnd_file.LOG,
'Entered From Date:'
|| (TO_DATE ( (l_chr_from_date), 'YYYY/MM/DD HH24:MI:SS')));
FND_FILE.PUT_LINE (
fnd_file.LOG,
'Entered To Date:'
|| (TO_DATE ( (l_chr_to_date), 'YYYY/MM/DD HH24:MI:SS')));
FND_GLOBAL.APPS_INITIALIZE (user_id => l_num_user_id,
resp_id => l_num_resp_id,
resp_appl_id => l_num_otl_appl_id);
BEGIN
FND_FILE.PUT_LINE (
fnd_file.LOG,
'Inserting the data in the custom table XXPOWL_HXT_OTL_INTF');
INSERT INTO xxpowl.XXPOWL_HXT_OTL_INTF (SR_NUMBER,
PROJECT_TASK_OWNER,
PROJECT_TASK_OWNER_PERSON_ID,
PROJECT_ID,
PROJECT_TASK_ID,
ASSIGNEE,
ASSIGNEE_ID,
ASSIGNEE_PERSON_ID,
ASSIGNEE_SUPERVISOR_PERSON_ID,
TASK_NUMBER,
PARENT_TASK_NUMBER,
DEBRIEF_NUMBER,
DEBRIEF_HEADER_ID,
DEBRIEF_DATE,
TASK_ASSIGNMENT_ID,
DEBRIEF_OBJECT_VERSION_NUMBER,
DEBRIEF_PER_COMPLETE,
DEBRIEF_LINE_ID,
DEBRIEF_PROCESS,
SERVICE_ACTIVITY,
SERVICE_ACTIVITY_TYPE,
INVENTORY_ITEM_ID,
ITEM,
BUSINESS_PROCESS_ID,
DEBRIEF_TRANSACTION_TYPE_ID,
DEBRIEF_UOM_CODE,
DEBRIEF_HOURS,
CONV_DEBRIEF_IN_HOURS,
DEBRIEF_START_TIME,
DEBRIEF_END_TIME,
DEBRIEF_SERVICE_DATE,
NOTES,
OTL_ELIGIBLE_FLAG,
NOTIF_SENT_FLAG,
NOTIF_ELIGIBLE_FLAG,
ERROR_DESC,
STATUS_FLAG,
INITIAL_NOTIF_SENT_DATE,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
LAST_UPDATE_LOGIN,
REQUEST_ID,
INITIAL_REQUEST_ID)
(SELECT b.incident_number sr_number,
h.resource_name project_task_owner,
h.source_id project_task_owner_person_id,
b.external_attribute_1 project_id,
b.external_attribute_2 project_task_id,
jtf_task_utl.get_owner (d.resource_type_code, d.resource_id)
assignee,
d.resource_id assignee_id,
jrre.source_id assignee_person_id,
paa.supervisor_id assignee_supervisor_person_id,
c.task_number task_number,
(SELECT task_number
FROM jtf_tasks_b z
WHERE c.parent_task_id = z.task_id)
parent_task_number,
a.debrief_number,
a.debrief_header_id debrief_header_id,
a.debrief_date debrief_date,
a.task_assignment_id task_assignment_id,
a.object_version_number debrief_object_version_number,
a.attribute1 debrief_per_complete,
e.debrief_line_id debrief_line_id,
cbp.name debrief_process,
cttv.name service_activity,
DECODE (cttv.attribute1,
'Y', 'Service-Billable',
'N', 'Service-Non Billable')
service_activity_type,
e.inventory_item_id inventory_item_id, --f.segment1 item,
(SELECT segment1
FROM mtl_system_items_b f
WHERE e.inventory_item_id = f.inventory_item_id
AND f.organization_id = b.inv_organization_id)
item, --241 --Mater Org
e.business_process_id business_process_id,
e.transaction_type_id debrief_transaction_type_id,
e.uom_code debrief_uom_code,
e.quantity debrief_hours,
(g.conversion_rate * e.quantity) conv_debrief_in_hours,
e.labor_start_date debrief_start_time,
e.labor_end_date debrief_end_time,
e.service_date debrief_service_date,
(SELECT note_tl.notes
FROM JTF_NOTES_B NOTE, JTF_NOTES_TL NOTE_TL
WHERE NOTE.JTF_NOTE_ID = NOTE_TL.JTF_NOTE_ID
AND NOTE_TL.LANGUAGE = USERENV ('LANG')
AND NOTE.SOURCE_OBJECT_ID = a.DEBRIEF_HEADER_ID
AND note.jtf_note_id =
(SELECT MAX (note1.jtf_note_id)
FROM JTF_NOTES_B note1
WHERE NOTE1.SOURCE_OBJECT_ID =
a.DEBRIEF_HEADER_ID))
notes,
'Y',
'N',
'X',
NULL,
'NEW',
NULL,
SYSDATE,
l_num_user_id,
SYSDATE,
l_num_user_id,
l_num_login_id,
l_num_request_id,
l_num_request_id
FROM csf_debrief_headers a,
cs_incidents_all_b b,
jtf_tasks_b c,
jtf_task_assignments d,
csf_debrief_lines e, --mtl_system_items_b f,
mtl_uom_conversions g,
jtf_rs_resource_extns_vl h,
cs_business_processes cbp,
cs_transaction_types_vl cttv --, cs_sr_task_debrief_notes_v notes
jtf_rs_resource_extns_vl jrre,
per_all_assignments_f paa
WHERE a.task_assignment_id = d.task_assignment_id
AND d.task_id = c.task_id
AND c.source_object_id = b.incident_id
AND c.source_object_type_code = 'SR'
AND a.debrief_header_id = e.debrief_header_id
AND e.uom_code = g.uom_code
AND g.uom_class = 'Time'
AND b.incident_owner_id = h.resource_id(+)
AND e.business_process_id = cbp.business_process_id
AND e.transaction_type_id = cttv.transaction_type_id
AND d.resource_id = jrre.resource_id
AND jrre.source_id = paa.person_id --= 181
AND TRUNC (SYSDATE) BETWEEN paa.effective_start_date
AND paa.effective_end_date
AND TRUNC (e.last_update_date) BETWEEN TO_DATE (
(l_chr_from_date),
'YYYY/MM/DD HH24:MI:SS')
AND TO_DATE (
(NVL (
l_chr_to_date,
l_chr_from_date)),
'YYYY/MM/DD HH24:MI:SS')
AND NOT EXISTS
(SELECT 1
FROM xxpowl.XXPOWL_HXT_OTL_INTF old
WHERE old.debrief_header_id =
e.debrief_header_id
AND old.task_number = c.task_number
AND TRUNC (old.DEBRIEF_SERVICE_DATE) =
TRUNC (e.SERVICE_DATE)
AND old.DEBRIEF_TRANSACTION_TYPE_ID =
e.TRANSACTION_TYPE_ID
AND old.request_id <> l_num_request_id
AND old.DEBRIEF_UOM_CODE = e.uom_code
AND old.DEBRIEF_HOURS = e.quantity));
i_num_rows_inserted := SQL%ROWCOUNT;
fnd_file.put_line (fnd_file.LOG,
'No of rows Inserted:' || i_num_rows_inserted);
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| 'Error while Inserting debrief lines data into custom table.Error: '
|| SQLERRM
|| '. Exiting the interface without processing further';
fnd_file.put_line (fnd_file.LOG, l_chr_error_msg);
ROLLBACK;
RETURN;
END;
FOR process_line_rec IN process_line
LOOP
l_chr_error_msg := NULL;
l_tbl_timecard_info.delete;
l_tbl_attributes_info.delete;
l_tbl_messages.delete;
l_new_timecard_id := NULL;
l_new_timecard_ovn := NULL;
l_num_time_building_block_id := NULL;
l_chr_message := NULL;
i_num_count := 0;
l_num_tbb_id := NULL;
BEGIN
hxc_timestore_deposit.create_time_entry (
p_measure => process_line_rec.conv_debrief_in_hours,
p_day => TO_DATE ( (process_line_rec.debrief_service_date),
'DD/MM/RRRR'),
p_resource_id => process_line_rec.assignee_person_id,
p_comment_text => process_line_rec.notes
|| '....Remove this notes in the code logic....Request Id:'
|| l_num_request_id, --pending lokesh
p_app_blocks => l_tbl_timecard_info,
p_app_attributes => l_tbl_attributes_info,
p_time_building_block_id => l_num_time_building_block_id);
fnd_file.put_line (
fnd_file.LOG,
'Step#1 completed, TIME_BUILDING_BLOCK_ID:'
|| l_num_time_building_block_id);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#1 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
-- Classify Time
-- Attribute1
hxc_timestore_deposit.create_attribute (
p_building_block_id => l_num_time_building_block_id,
p_attribute_name => 'Task_Id',
p_attribute_value => process_line_rec.project_task_id,
p_app_attributes => l_tbl_attributes_info);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#2 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
-- Attribute2
hxc_timestore_deposit.create_attribute (
p_building_block_id => l_num_time_building_block_id,
p_attribute_name => 'Project_Id',
p_attribute_value => process_line_rec.project_id,
p_app_attributes => l_tbl_attributes_info);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#3 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
-- Attribute3
hxc_timestore_deposit.create_attribute (
p_building_block_id => l_num_time_building_block_id,
p_attribute_name => 'Expenditure_Type',
p_attribute_value => 'Service-Billable',
-- p_attribute_value=> 'Service-Non Billable',
p_app_attributes => l_tbl_attributes_info);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#4 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
-- Attribute4
hxc_timestore_deposit.create_attribute (
p_building_block_id => l_num_time_building_block_id,
p_attribute_name => 'Expenditure_Comment',
p_attribute_value => 'Expenditure Comment created by API',
p_app_attributes => l_tbl_attributes_info);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#5 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
-- Attribute5
hxc_timestore_deposit.create_attribute (
p_building_block_id => l_num_time_building_block_id,
p_attribute_name => 'SYSTEM_LINKAGE_FUNCTION',
p_attribute_value => 'ST',
p_app_attributes => l_tbl_attributes_info);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#6 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
hxc_timestore_deposit.execute_deposit_process (
p_validate => FALSE,
p_app_blocks => l_tbl_timecard_info,
p_app_attributes => l_tbl_attributes_info,
p_messages => l_tbl_messages,
p_mode => 'SAVE', -- p_mode-> 'SUBMIT', 'SAVE', 'MIGRATION', 'FORCE_SAVE' or 'FORCE_SUBMIT'
p_deposit_process => 'OTL Deposit Process',
p_timecard_id => l_new_timecard_id,
p_timecard_ovn => l_new_timecard_ovn);
COMMIT;
hxc_timestore_deposit.log_messages (p_messages => l_tbl_messages);
IF (l_tbl_messages.COUNT <> 0)
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#7 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM
|| '.API Error messages are:';
i_num_count := l_tbl_messages.FIRST;
LOOP
EXIT WHEN (NOT l_tbl_messages.EXISTS (i_num_count));
l_chr_message :=
fnd_message.get_string (
appin => l_tbl_messages (i_num_count).application_short_name,
namein => l_tbl_messages (i_num_count).message_name);
fnd_file.put_line (
fnd_file.LOG,
(l_tbl_messages (i_num_count).message_name));
l_chr_error_msg := l_chr_error_msg || l_chr_message || '.';
i_num_count := l_tbl_messages.NEXT (i_num_count);
END LOOP;
END IF;
EXCEPTION
WHEN OTHERS
THEN
fnd_file.put_line (
fnd_file.LOG,
'**** Error.....Inside Exception Block in execute_deposit_process');
BEGIN
hxc_timestore_deposit.log_messages (
p_messages => l_tbl_messages);
EXCEPTION
WHEN OTHERS
THEN
fnd_file.put_line (
fnd_file.LOG,
'*****Error....Inside Exception Block in hxc_timestore_deposit.log_messages.Error:'
|| SQLERRM);
END;
l_chr_error_msg :=
l_chr_error_msg
|| 'Error in INSERT API CALL at Step#7 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM
|| '.API Error messages are:';
IF (l_tbl_messages.COUNT <> 0)
THEN
i_num_count := l_tbl_messages.FIRST;
LOOP
EXIT WHEN (NOT l_tbl_messages.EXISTS (i_num_count));
l_chr_message :=
fnd_message.get_string (
appin => l_tbl_messages (i_num_count).application_short_name,
namein => l_tbl_messages (i_num_count).message_name);
l_chr_error_msg := l_chr_error_msg || l_chr_message || '.';
i_num_count := l_tbl_messages.NEXT (i_num_count);
END LOOP;
END IF;
END;
COMMIT;
IF l_chr_error_msg IS NOT NULL OR l_new_timecard_id IS NULL
THEN
fnd_file.put_line (fnd_file.LOG,
'***** Error *****' || l_chr_error_msg);
o_ret_code := 1;
END IF;
BEGIN
fnd_file.put_line (
fnd_file.LOG,
'Updating the status of the record in custom table for debrief_line_id:'
|| process_line_rec.debrief_line_id);
UPDATE xxpowl.XXPOWL_HXT_OTL_INTF
SET status_flag =
DECODE (
l_chr_error_msg,
NULL, DECODE (
l_new_timecard_id,
NULL, 'FAILED',
DECODE (SIGN (l_new_timecard_id),
'1', 'SUCESS',
'FAILED')),
'FAILED'),
time_building_block_id = l_new_timecard_id,
last_update_date = SYSDATE,
request_id = l_num_request_id,
last_updated_by = l_num_user_id,
error_desc = l_chr_error_msg
WHERE ROWID = process_line_rec.row_id;
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error while updating the status to SUCCESS.Error: '
|| SQLERRM;
END;
END LOOP; --process_line
EXCEPTION
WHEN OTHERS
THEN
FND_FILE.PUT_LINE (
fnd_file.LOG,
'Unknown/Unhandlled Exception Error......' || SQLERRM);
o_ret_code := 2;
END main_process;
SHOW ERR;
Error Messages:
1. Error in INSERT API CALL at Step#7 for the debrief line id: 41011.Error:ORA-00001: unique constraint (HXC.HXC_ROLLBACK_TIMECARDS_PK) violated.
2. Error in INSERT API CALL at Step#7 for the debrief line id: 41011.Error:ORA-00001: unique constraint (HXC.HXC_LATEST_DETAILS_FK) violated
Thanks a lot for the help!Hello
We will get this error message when we run this from application other than "Time and Labor Engine". So try to run this concurrent program (if you registered as a conc. program) from Time and Labor Engine application.
--Lokesh -
Help error while booting sunfire v440 (error)
Hi solaris admins.
i am getting the following error while trying to install the solaris 10 OS on a sunfire v440 server.Please can someone help me out here.i think the problem is with the Hard Drives or something.
=================================================
Sun Fire V440, No Keyboard
Copyright 2005 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.17.2, 8192 MB memory installed, Serial #63181061.
Ethernet address 0:3:ba:c4:11:5, Host ID: 83c41105.
Rebooting with command: boot cdrom
Boot device: /pci@1e,600000/ide@d/cdrom@0,0:f File and args:
SunOS Release 5.10 Version Generic_118833-33 64-bit
Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
=======================================================
Hardware watchdog enabled
Configuring devices.
WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
Corrupt label; wrong magic number
WARNING: /pci@1f,700000/scsi@2/sd@2,0 (sd4):
Corrupt label; wrong magic number
========================================================
internal error: Bad file number
svc:/system/filesystem/local:default: WARNING: /usr/sbin/zfs mount -a failed: ex
it status 134
====================================================
Plese and advice and ideas are highly appreciated.
We Brain server.
Regards
Noa Junior Sys AdminNo clue why it's doing that when you're booting off
the CD though... I didn't think it checked. Hmmm.
boot cdrom will try and start the installer - not sure what happens if no valid disk label.
I do recall going through this (or something similar)
when the HD in my Blade 150 failed and I swapped in a
new one. I just formatted the drive, then I was
fine. Not sure HOW I formatted it though. Never
bothered to write it down, it seemed obvious at the
time :-(Could first try boot cdrom -s to just get a single user shell, and then run format just to create the disk labels.
If manually running format successfully labels the disks, then try running the installer (which should give the option of how to partition the disks). -
[SOLVED] nouveau error while booting arch
Hi!!! I'm newbie to arch, here is an error I can't solve myself. I search in google for solutions but they didn't solved. Please help me to solve this. I dual booted arch linux with window 8.1. After installation, while booting for the first time, this error occurred.
Here is the error I found.
[0.063411] Ignoring BGRT: Invalid status 0 (expected 1)
starting version 218
Arch_Linux: clean, 70622/18677760 files, 1643393/74703025 blocks
[ 15.759913] nouveau E[ PIBUST][0000:01:00.0] HUBO: 0xffffffff (0x1a
[ 15.759952] nouveau E[ PIBUST][0000:01:00.0] GPCO: 0x00000001 (0x1a
[ 15.823494] nouveau E[ PBUS][0000:01:00.0] MMIO: 0x00000000 FAULT a
[ 15.824050] nouveau E[ DRM]Pointer to TMDS table invalid
[ 15.824072] nouveau E[ DRM]Pointer to flat panel table invalid}
Last edited by aaa234 (2015-02-04 04:18:42)aaa234 wrote:
runical wrote:
That is a different problem to be honest. I assume that you can login using your normal user? If you set up sudo you might be able to get into root by using
sudo su
and change the password like that.
I'm sorry if this is a noob question. Where do I type sudo su because as soon as the OS is booted, the system asks localhost login and password. I haven't installed any desktop environment yet. I only set up a password under arch-chroot but I can't login with and without that password.
I was assuming a normal installed environment with a normal user. Using "sudo su", you can abuse privileges granted by sudo to circumvent the password required by su. A well configured sudo should not allow this, but in this case it seemed likely that the system was not completely set up yet.
problem has been solved with this https://bbs.archlinux.org/viewtopic.php?id=168879
Then, if there are no more problems, please mark the thread as solved. -
Hi,
Pls help me to solve my problem. My coding is comple well while run time it showing me the error,
Fatal Error: The value of attribute "xsi:schemaLocation" associated with an element type "null" must not contain the '<' character.
The value of attribute "xsi:schemaLocation" associated with an element type "null" must not contain the '<' character.pls help me as soon as possibleIt's not your coding. The XML document which contains that attribute is not well-formed.
-
[SOLVED]LUKS error while booting
This is more of an annoyance than a real problem; however it would be nice to know what is causing this. I have an unencrypted root (/dev/sda3) and two encrypted partitions. While booting I get the following message:
ERROR:Failed to open encryption mapping: The device /dev/sda3 is not a LUKS volume and the crypto= parameter was not specified.
However despite this the root is mounted correctly and the boot process follows normally. My two encrypted volumes also mount correctly. I checked my /etc/fstab and /boot/grub/grub.cfg and didn't see anything that might be giving it the idea that my root partition is encrypted. Am I missing something?
Thanks,
musashi.
Last edited by musashi (2012-06-13 15:19:59)you probably have "encrypt" in your HOOKS array in /etc/mkinitcpio.conf .
remove it and rebuilt your initramfs with "mkinitcpio -p linux" -
[SOLVED] Error while booting, related to nilfs2
I've just installed my fresh Arch and used nilfs2 inside vlm2 as my home partition. While booting, I'm getting these errors:
fsck: fsck.nilfs2: not found
fsck: error 2 while executing fsck.nilfs2 for /dev/mapper/TheVG-HomeLV
Other logical volumes are getting "clean" output while checked so it's not vlm-related; they are all ext4.
Partition is mounted and seems to work but I'm scared of just ignoring it and creating my user. ;-)
I have nilfs-utils installed. Is there any hook or module I need to add somewhere in order to use nilfs2 properly (like reiserfs hook)? There is nothing in the Wiki about this file system...
Edit: well, it appears that nilfs doesn't not come with check utility so I'm marking this as solved; sorry for garbage post...
Last edited by smsware (2013-03-16 22:07:55)As there is no fsck utility and as it actually is planned to be created (I read that it's needed because the fs can easily crash on power loss; still, it can be recreated, as you stated) - there is a warning while building the kernel. I deleted fsck hook to not see it as my /var and root are sub-volumes of btrfs partition which doesn't need fsck as well. I made a service to umount, fsck and mount back the /boot (ext4) and uefi partitions... just to let you know what you can expect. But it's great anyway, snapshots are really easy to mount and use. I thought it has no wiki page because it's not popular (and probably for a reason) but now I believe it's because there is nothing to write about... it just works. ;-)
Last edited by smsware (2013-05-29 15:58:26) -
OS:HP-UX
Tux8.1 (32-bit)
I am getting below error while trying to boot the tuxedo app.
FATAL: conflicting options: CMDTUX_CAT:762: ERROR: LAN mode not specified for multiple node application
few other facts:
MODEL param is SHM
The TUXDIR, TUXCONFIG & other Env variables are set properly. I cleaned up all IPC resources but still no luck.
The same configuration was working before. Its when a day before we brought it down started giving trouble.
Pls advise.Hi,
Can you post the entire *RESOURCES section of your ubbconfig file?
Also since this was working and has stopped, I'd verify that in fact there are no remaining processes hanging around. Ideally I'd reboot the machine to see if that clears it up.
Regards,
Todd Little
Oracle Tuxedo Chief Architect
Maybe you are looking for
-
when I try to upload the latest version of iTunes, it tells me to enter an alternate path to a folder containing the installation package iTunes.msi. What does this mean as I can't seem to find any such folder and now I cannot uninstall Itunes either
-
Since installing Mavericks, I find some windows open just a bit larger than the actual screen. Just enough so that I can neither reach the three dots in the upper left hand corner nor the bottom right hand corner to resize it. In fact, I am totally s
-
Billing Customer for Services given by vendor - RRB
Hi, In Scenario - Resource Related Billing (PS - SD) for Customer Projects, we receive services from External vendors & we want it to bill to our customer via RRB. What config settings are required?
-
User Presets in Lightroom?
I currently have Lightroom 2 and am thinking of purchasing Lightroom 3. Can I transfer my user presets from Lightroom 2 to Lightroom 3? Also, does it matter that I'm switching to mac from PC when transferring my catalogues etc.?
-
Hello, I have an applet running in embeddad systems. This program runs without any problem since 8u31 update! After this update it starts to give java security warning and stops running. Here is the warning message: "Your security settings have b