Some software instruments are not working when midi controller is plugged in for logic pro x

So I have made a track and I have been using my midi controller. Some instruments work when i record on the track. But if i change to some other instrument i.e. the vintage organs, then it won't work. I have bypassed all control surfaces and it still hasn't worked.

Some of the vintage organ patches use different Midi channels.....other than Chan 1 for other registers... Example Chan 3 might be used for the pedals... and Chan 2 might be used for the lower keyboard/register of the organ...
Check your keyboard to see what Midi channel it is actually transmitting on and set it accordingly....

Similar Messages

  • I have a macbook pro with OSX Mavericks 10.9.5 and some keys that are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys.  What's really weird is that happens randomly.  I've never spilled anything on it

    I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys.  What's really weird is that happens randomly.  I've never spilled anything on it, and I can't for the life of me figure out how to fix this.  Can anyone help?  of course this happened after my warranty expired.

    **update**
    I don't know if this will help someone but I am posting this for that purpose.  In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!).  Well I didn't want to do that but it always stuck in the back of my mind.  I had given up, really, and was planning to take my MBP to the apple store.  But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working. 
    So, maybe try keeping the MBP in a cool place when it's off.  Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
    Hopefully this might help someone.

  • My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

    My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

    Clean iPhone charging port with a clean dry toothbrush. The iPhone port has a short, and falsely senses it is in a dock device.

  • My previews are not working when I make adjustments

    My previews are not working when I make adjustments?
    I am wondering why this may be?
    I just bought the program like 1 week ago too :-(
    Any ideas?

    What kind of adjustments are you making? Where are you looking for the previews? If you're using select list of filters or color adjustments, have you enabled 'Preview' in the dialog box?

  • My sistem preferences are not working, when I try to change the photo of the desk It stop working, what can i do?

    my sistem preferences are not working, when I try to change the photo of the desk It stop working, what can i do? I'm dieing cause I'm afraid

    Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

  • Keep getting message pop up "Error reading/writing file  "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

    Logic froze while I was working on something so I forced quit.  Now every time I open LOGIC a message pops up that says:
    "Error reading/writing file
    “com.apple.logic.pro.cs”:
    Logical end-of-file reached during read operation."
    The only button option is cancel so I press it and another message appears that says:
    "The Preferences are not loaded completely.
    Do not save them, as you would overwrite the Preferences file with incomplete data."
    Then when i close logic a box appears saying:
    "The Preferences are not loaded completely.
    Save them to "com.apple.logic.pro.cs" anyway?"
    There are 3 button options to press; ok, cancel or dont save.
    I press "don’t save" cuz I don't want to ruin anything.
    I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem.  If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done?  I have hundreds pieces of music files I've created.  I'm scared to mess anything up with all the hours and months of work I've done.  Is there anyway to fix this without loosing anything?  I'm using Logic Pro 8.
    Thank you

    You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
    Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

  • Why are some of my keys not working when I put a bit of pressure on it?

    Hi there, since 4 months ago I've noticed that my a, q, 1, backspace, and volume buttons do not work when theres a little bit of pressure on or under it. It kind of bothers me because I cant lay in bed and do my things, I have to put it on a table. So my question is, why is this and how can I fix this?
    5 or more weeks ago, I can't remember, my keys did suddenly work when there was a bit of pressure on / under it, but I don't know how..
    I'm running OS X Mavericks 10.9.4
    Processor: 1.3 GHz Intel Core i5
    Memore: 4 GB 1600 MHz DDR3

    What is your operating system?  Reader version?  How do you convert to PDF?
    You write that "some" of the links don't open; what's the difference with links that do open?

  • All hyperlinks are not working when published

    All of the links work on iweb 09; however, when published some of the links are not working. To get an idea of what I mean you can go to the site, thinkwhatif.org and see it. Would someone be able to provide an answer how to solve it? I have unlinked and relinked too and that didn't work (at least the one time I did it).
    Thanks in advance for helping me figure it out.
    I am learning..

    Bonjour,
    It's a layout issue. Two of your buttons (who or what) are in the navigation part of your page (nav_layer), which is back layer of your page. In your page, the content (body_layer) overlays the bottom of this layer (nav_layer) where the buttons are.
    !http://i22.servimg.com/u/f22/09/02/44/99/layout10.jpg!
    Show layout (iWeb > View > Show layout) and replace the buttons in the content. As you can see , you 've got also a empty textbox in the content

  • Dv6 2190us - some keyboard keys are not working

    Hi there all,
    My sis bought me Dv6 2190us laptop last Feb 2010 and I just got it now. The problem now is, some of the keys like the letters - W, S, and X are not working so I am not able to log-in to Window 7. The laptop is brandnew, the keys are not sticking but the only unusual thing is that , the battery was attached to the laptop for one year.... Couldnt this be the reason and what should I do to resolve this? Appreciate your kind help!
    Thanks in advance,..

    also having this issue with 6 month old dv6 3031 but my entire line beginning with a to enter key will not respond so i cannot do any tests or what not. i was advised to do bios setup by clicking F10 when notebook is booting up, arrow across to Diagnostic menu and perform PRIMARY HARD DISK SELF TEST. of course i was unable to do this as my enter key does not work but maybe you could give it a go and have more luck
    cheers

  • Satellite C660-17L - Some TouchPad functions are not working

    My touch pad functions are not working:
    - I can't use it to scroll up and down
    - I can't use it to zoom.
    What should I do to fix it?

    Yes the model number is Satellite C660-17L
    And no I didn't install the touchpad driver.
    I Have had this laptop for less than a month, I started it one day and tried to scroll but it didn't work.
    Also i tried to search for the advanced settings under the mouse option but I couldn't find it.
    When I enter the search directly into the search bar, the mouse option comes up but when I click on it, it asks me if I want to uninstall the synaptics driver.
    I have no idea what this means but I click no and it comes up with all the mouse setting options.
    What should I do now?

  • Numeric Keys and some other keys are not working

    Hi,
    I am having T60 2613 HNU model, ,the problem i am facing issue in keyboard.
    following key are not working
    numeric keys are not working
    end key is not working
    left arrow is not woking
    working keys are as follows
    5,6 is working
    all alphabet keys are working
    I have even updated the bios also not working, I went to bios and made to load default value. my problem is not solved
    i try to remove the xp and tried to go for Fedora 12, there also i am facing the same problem.
    Do any body have solution of this. , please help me.

    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62911
    run the above software. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • My flash links are not working when it is www request

    Dear Friends,
    We have done one application for the mobiles..in that we have used flash xml menu. In my xml menu i have mentioned the urls with www. request.
    When its http://www.xyz.com menu links are not working.
    If its http://xyz.com  my menu links are working fine. Can you please suggest me once how can i achive this.

    How did you fix it?

  • AUDIO PROBLEMS when converting to youtube - When I export my file, parts of the audio are not working on ipads or iphones - any explanation for this?

    I am posting videos to youtube and for some reason different portions of my audio are not working both on iphone and ipads...  any thoughts on this would be appreciated

    Try using psd.  Some rerports indicate some confustion between the apps with TIFF.  See:
    https://discussions.apple.com/message/15921933#15921933
    I cannot confirm, nor test, since I use PS CS5, and not Elements.
    Ernie

  • Some amixer-commands are not working.

    Hello, some of the commands of amixer are not working for me, e.g. "amixer set PCM toggle" or "amixer set PCM mute". But other commands like "amixer set PCM 100%+" work fine. How can I change this? Especially I want to use the toggle-command for the hotkey on my laptop.
    Greets, Mo.

    Thanks for your help, but sset does not work . And I am a user in the audio group... So what else could help?
    Last edited by Mo (2007-01-29 22:27:26)

  • Modem on DV7-3069wm not working when AC Adpater is plugged in

    A friend asked me to look into a problem they are having...  
    Their 56K modem does not work when the AC adapter is plugged in.  It works just fine when the laptop is running on the battery.  Even if they are connected (using battery) and plug the AC adpater in the modem disconnects and won't connect again.
    Any ideas?

    Any help would be appreciated.

Maybe you are looking for

  • Processing Terminated

    Hi Folks,   I am trying to create a Execute a DTP,for which the data is coming from a cube. All Transformations are active and after executing the DTP,i'm facing the below mentioned errors:    Error while updating to target ZPOP_CHA (type INFOCUBE)  

  • I can't close the apps on my iPad 2 now that I have updated to IOS 7.

    Any suggestions on how to close them. This is just the first of numerous problems I am having with IOS 7.

  • I can't move past set up.

    I'm on the finishing screen of set up and am supposed to click a button to move on. The keypad is locked and the trackpad is locked for clicking by default, what can I do?

  • Does a single transaction, spreeds accross multiple rollback segments?

    Hi, Does a single transaction, spreeds accross multiple rollback segments? What if , there is not enough space in the allocated rollback segment? Thanks Naveen.

  • DROP Tablespace - Taking long time.

    Hi Team, I am trying to drop the tablespace its taking too much time .. around half an hour..!! We have allocated that tablespace to the perticular user I am tring to kill the sessions for that user nut sessions are marking for kill but not releasing