Some software missing in the default repositories?

Hi,
I am a Debian Testing user so I'm new to Arch Linux and I can't find some packages; Unetbootin, Virtualbox and Wine.
In Debian apt-cache search [packagename] works perfectly, but pacman -Ss [packagename] doesn't seem to work as good.
Many queries don't work while the packages are in the Arch repository. So mostly I use apt-cache search to find software.
Is there a way to configure pacman to work better?
So are these three packages really not in the default repository?
If that's the case then what's the reason?
According to this Wiki article pacman -S wine should work (I use x86_x64). But nothing happens, the package can't be found...
I have the same issue with Virtualbox, according to this article it is not available for x86_64. Why is that?:/
There was a Romanian repository to get VBox for x86_64 but most of the time it's dead. And doing a Windows like installation doesn't seem tempting either.
Unetbootin is a total mystery to me...
Can anyone help?
Extra info:
Arch Linux x86_64 (up to date)
Default repositories, uncommented enough mirrors
Thanks in advance!
Last edited by Keessince1988 (2010-02-11 19:49:22)

Here is a pkgbuild for native wine 64 bits http://aur.archlinux.org/packages.php?ID=24855 But you can run only 64 bits windows apps. Sometimes doesn't compile.
If you want wine 32bits on your 64 bits system then here:  http://aur.archlinux.org/packages.php?ID=7915 but you need a lot of 32bits libs.
For virtualbox you can install closed source edition with usb support. Works fine on 64 bits system http://aur.archlinux.org/packages.php?ID=9753
Last edited by agapito (2010-02-12 14:52:26)

Similar Messages

  • Why are some text missing from the right side of a page I send to my printer?  Thanks

    Why is some of the text missing on the right side of a page I send to my printer?

    I came across something similar recently where it printed the left hand side only!
    If I want to print an email, instead of File > Print  ( does not print properly ) I click on the print icon on my email webpage ( do not use applemail and access gmail direct) which then takes me to print preview showing the complete email which prints ok.
    Some webpages ( File>Print) do not print properly and some do. Those that do not generally have their own printer icon (path) that needs to be clicked on.
    Maybe something to do with encryption but don't know.
    Hope this helps in some way.

  • Some Data Missing in the inbound Idoc received from Gentran

    Hi,
    We are receing one custom message type with the basic type ORDER05 in SAP from Gentran. When we checked the destination file generated in Gentran, its showing data for all the segments. However in SAP when we checked the corresponding idoc we find the segment E1EDP05 is missing. The Gentran team says they are placing the destination file in the unix server of SAP. However we dont find these files in the SAP Unix server. Could anybody advise what could be the problem and where we need to check further ?

    Gentran will never be able to create an IDOC within SAP. Here is what happens:
    > Gentran creates a flatfile/XML which is in the IDOC format (the one which you can see in WE60).
    > Gentran then places this flat file/XML in a folder on Application server. This can be UNIX, Windows NT, etc..
    > Gentran then triggers the Startrfc.exe which will trigger EDI_DATA_INCOMING function module.
    > This FM will parse the data, check it for consistency of the defined standards, then write the control record into EDIDC and corresponding data records into EDID4 and updates the relevant statuses (i.e. 01 - added, etc). It'll then look into the partner profile setup, look for process code and moves the status to 64 and calls the inbound FM which will post the application document.
    In you case, you need to find out what file is coming in and where E1EDP05 has missed. The data will only be sent by Gentran. The inbound function modules will never update IDOC data records (unless there is a customization). The status records are updated.
    If E1EDP05 is not mapped and sent by Gentran and you still used to see it, then there should have been a customization in place to add values to IDOC segment fields. Try to get the final file that is mapped from either X12/EDIFACT and then see if E1EDP05 segment is present in there. If it is present then upload the same file into AL11 using CG3Z and call EDI_DATA_INCOMING or WE19 to process it. Once processed, you'll can observe if E1EDP05 is being created or not.

  • ChaRM: Some actions missing in the Correction Document?

    Dear all:
              I have followed all the tutorials about creating a charm, everything is fine but when handling the correction document I can never see in the action list the items "Logon to system" and "Complete development" (I can see al the other items though). Anyone has an idea about this? Where those actions come from?
    Thank a lot in advance!!
    Federico.

    Hello Frederico,
    These actions are PPF actions, they are assigned to an action profile and this action profile is assigned to the CRM transactions such as SDCR, SDHF, and so on. You can maintain that at SPPFCADM.
    However, sometimes the basis PPF database tables are not completed updated during the activation of BC-set SOLMAN40_CHARM_BASICFUNC_001.
    Our recommendation now is to reactivate the ChaRM BC-Sets, in order to recreate all entries missing. However, I have to remind you that if you have performed some customizing in ChaRM this will be overwritten.
    So, if you agree with this statement, please reactivate the BC-Sets in this sequence:
    SOLMAN40_CHARM_PROXYFACT_001
    SOLMAN40_CHARM_BASICFUNC_001
    SOLMAN40_CHARM_TRANSTYPE_SDMJ
    Please check note 907768 that has informations about how to activate ChaRM BC-Sets.
    Best Regards,
    Fernando Rocha

  • PU12 run some employees missing in the file created

    Hi,
    In the file that is created during the pu12 run today generated only 50 employees. But when it was run 2 days back with the same variant, the records exported were 266.
    What could be the possible reasons for these many missing pernrs.
    Thanks & Regards,
    Soumya.

    Hi,
    Previous run gave you 266 result and current one 50 result. The possible result may that for those 50 pernrs some records have been modified. Basically PU12 generates output based on some modification on employee records. If you check then you will find that after running 1st time with the same variant when you execute the PU12 with same variant then some modification was done on those 50 pernrs record. rest pernrs record was not modified. This may be one of the reason.
    Thanks & Regards,
    Sandip

  • B&O Equalizer Software missing after the upgrade to windows 10

    After the upgrade to windows 10, the pre installed B&O Equalizer software is missing. Besides after i installed the audio driver provided by Hp Support , the sound quality and the level are degraded.
    I am unable to find the software. Help

    Hi  ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion 15-ab029tx Notebook and issues with Bang & Olufsen Equalizer Software. Try using the Windows Update Troubleshooting tool to fix the problem.Here is a document that shows how to update drivers that are not working correctly with Windows 10.I hope this helps. Thanks.

  • Some fields missing from the Information interface

    On iTunes 12 I can’t find the "Description" field that was in the Video page.
    The field still shows in the list of songs, but it doesn’t appear on the new "Information" interface. And I don't think this is the only field missing compared to the previous Information interface. Can anyone help? Thank you.

    ... before you click Get Info.
    tt2
    YES!
    Thank you turing! That really helped.
    (it seems a bit of a complication to me, the system was just fine as it was, but what do I know?)

  • Some artists missing from the "following" list

    I noticed that there are some artists that I follow who do not appear in the "following" list of my profile.
    This is a problem when I forget the name of some of my followed artists and I don't find them no longer on the list, loosing this way the possibility to listen to him forever!
    Someone else has the same problem? How can I solve it? there is no other way to access the full list of all my artists?
    many thanks in advance

    recently started using Spotify, so far so good, but following artists and saving albums is important to me, since that's the point of using Spotify for me and if that part is not working properly, why keep track of things that can't be tracked and personalized. I follow a lot of artists and also have saved (not downloaded) albums of these and also non-followed artists.Some of these artists and albums don't show up again in my "Your Music" section under Artists and Albums, they appear in "Recently Played" if I have listened to these. My specific example is for Artist: Biréli Lagréne(not trying to promote the artis here, but that's how I noticed)I click follow, then save some of the albums (all actually) and the next time I m using Spotify the artist is not followed and the albums are not saved, (I have downloaded one Album to test if that cements the artist and album into my list?, just to see what happens)

  • Missing some error messages from the error stack

    Hi all,
    We use some PL/SQL code to load data in to the database.
    One value was to large for a column.
    I got the errors below, but there are some messages missing from the alert file and from the trace file.
    Error messages:
    ORA-06502: PL/SQL: numeric or value error
    ORA-01401: inserted value too large for column
    That's it, noting else. I can't see anything else in the alert log either.
    No trace files either.
    Can someone please explain to me why am i missing the rest of the error stack, like the column name where the issue occurs?
    Thanks.

    Peter,
    No your code won't work the same in 10g as it would in 9i and earlier. The -1401 exception is not secretly catching -12899 now. So that means it could be an upgrade issue: you'd have to manually change the code when upgrading to 10.
    Here is a little test on 10.2.0.1:
    SQL> create table t
      2  ( id number(2)
      3  , name varchar2(2)
      4  )
      5  /
    Tabel is aangemaakt.
    SQL> declare
      2    my_exception exception;
      3    pragma exception_init(my_exception,-1401);
      4  begin
      5    insert into t values (99,'AAA');
      6  exception
      7  when my_exception then
      8    dbms_output.put_line('my error message');
      9  end;
    10  /
    declare
    FOUT in regel 1:
    .ORA-12899: waarde te groot voor kolom "RWIJK"."T"."NAME" (huidige waarde: 3, maximumwaarde: 2)
    ORA-06512: in regel 5Regards,
    Rob.

  • JPS-01514: The default context is missing in jps-config.xml.

    when we will get the below erros what is missing
    weblogic.security.SecurityInitializationException: The dynamic loading of the OPSS java security policy provider class oracle.security.jps.internal.policystore.JavaPolicyProvider failed due to problem inside OPSS java security policy provider.
    JPS-01514: The default context is missing in jps-config.xml.
    Caused By: oracle.security.jps.service.credstore.CredStoreException: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: PKI-02002: Unable to open the wallet. Check password

    Check the jps-config.xml file. This has the configuration for security services. Seems like the default context is missing. The default context is essential for connecting to the policy store. If not, you can use a named context to connect to the policy store/idstore etc.

  • CS4 Extended - Some Icons missing

    Hi there,
    there are some icons missing regarding the control if the opened files ( see attached image link ).
    I tried reinstall but without success.
    http://img383.imageshack.us/my.php?image=iconsle0.jpg
    ANy ideas?
    regards,
    malojo

    I had the same problem. It also caused some issues in CS3 with the selection tools.
    Remove Nik software if it's present in your plugins folder. For me the specific folder that fixed it was named "penpalette." Once I deleted this the icons came back and the program worked much better and more smoothly.

  • What Are The Default Music Icons On iTunes 10?

    What Are The Default Music Icons On iTunes 10?
    So far I have:
    Alternative
    Blues
    Classical
    Country
    Dance
    Electronic
    Folk
    Christian & Gospel
    Hip-Hop
    Jazz
    Latin
    Pop
    R&B
    Reggae
    Rock
    Vocal
    World Fusion
    Which ones am I missing?

    the default apps would vary by region
    this is whats in most models below
    facebook
    hi five
    youtube
    real player
    ovi music
    radio
    bounce tales
    these are whats on most models but they would vary by region and operator
    some others would have extra or even less
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • How to set the default item showed in a h:selectonemenu

    I need to show the second, or the third, and on so.
    i tried some ways to set the default item showed in it, but failed.
    i had tried the attribute value, but it stiil showed the first item.
    Can u help me?
    in the JSP
    <h:selectOneMenu id = "companyName" rendered="true" binding="#{j03CMSyainAddBean.selectCompany}" style="width:150">
           <f:selectItems value="#{j03CMSyainAddBean.companyList2}"/>
    </h:selectOneMenu>in the back BEAN
    private UISelectOne selectCompany;
    private ArrayList companyList2;In the ArrayList companyList2, there are several selectItems.
    Thanks
    George

    Sanjeev K Sharma wrote:
    and without messing with /boot/grub/grub.cfg  ?
    I need this so that new kernels show up but do not change the default boot kernel
    Is there a way to do it by file name instead of position within the menuentry / submenu list?
    I found some ubuntu and fedora sugestions but all by position, none by name
    AND how to set the kdump kernel as the default?
    Arch is putting this kernel under a submenu - would this pose problems for setting it as the default?
    In /etc/default/grub you can use the name of your entry you wish to use as default
    GRUB_DEFAULT='Arch Linux, with Linux core repo kernel'
    You can tell grub to stop using submenus by doing:
    GRUB_DISABLE_SUBMENU=y
    Or you can just make a purely custom menuentry in /etc/grub.d/40_custom if you'd like:
    menuentry "Other Linux" {
    linux <KERNEL IMAGE HERE>
    initrd <INITRD IMAGE HERE>
    EDIT: /etc/grub/default -> /etc/default/grub
    Last edited by Slabity (2015-04-07 11:16:22)

  • Can I change the default for podcast deletion after listening?

    I have only just discovered that many of my cherished podcasts have been getting deleted after I listen to them. I originally set the option to NEVER delete after listening when I first installed iTunes years ago and I haven't change it since. However, I can only assume that it was changed by Apple during an upgrade at some point and I never noticed. The delete after listening option has been set to On for podcasts going back many years (2008 at least).
    Two questions:
    1. Is there some way to change the default setting to Off?
    2. Is there a way to bulk change the setting for multiple existing podcasts?
    Thanks.
    For what it;'s worth; I'm running iTunes 12.1.2.27 on Windows 7 64-bit on a Dell Latitude laptop.

    Choose the Podcast view you are using (either Podcasts/Podcasts or Podcasts/Episode List) from below:
    or
    and select Delete Played Episodes <Off> from the drop-down menu

  • Making php the default file type

    I've got a client set up to use Contribute to edit a PHP
    site. When he creates a new page, the default file extension is
    .htm and it needs to be .php. I looked for some way to change the
    default file type in the Preferences but I can't find it. Is there
    a way to do this?

    Try going into Administer Website settings and select New
    Pages> then select default file extension and add .php.

Maybe you are looking for