Some software questions (Help, Ca
Hi, Creative. I'm an old costumer of Creative Labs, and now I have an Audigy 2 ZS and upgraded to Windows Vista.
Firstly, the latest drivers are working fine, at least to me. But the most important question: when I bought your product, I received a lot of softwares bundled.
No, not the games, but these software made by Creative to offer to the costumer many possibilities to obtain the best of the soundcard, like the equalizer, the THX control, etc...
Thus, I'd like to know the answers to a few questions:
. Will this softwares be released in versions compatibles with Windows Vista?
2. Is there an E. T.A., if the first answer is affirmati've?
3. and, last but not least, will it be offered free of cost to the consumers, through download?
I would appreciate if this question be answered by one of the Moderators.
". Will this softwares be released in versions compatibles with Windows Vista?"
The various bits of software that come bundled with every soundcard, such as the consoles, are having Vista versions being worked on. Unfortunately I do not have a ETA, and I don't know how it's going to be released, although I am assuming it'll be put on our website like everything else.
Dale
Similar Messages
-
Hi friends i have some interview questions please give me good answers.thanks for advance.
1.what is info provider?what is advantages and disadvantages?
2.when your working process chains you set up 2 jobs ,one is 12 pm and anothet 3 am.when you come morning there is errors what is the first thing you do?
3.in the info provider data is loaded in serial or parallel?
4.when your working in reports there is 8 columns,but we have requirement of 10 columns how you can added it?
5.what is integrating planning in BPS?
If possible please send me good interview questions to my mail id.
takecare
bye
habeeb
[email protected]Please think when you were at the beginer stage.Yes, I guess setting up a second machine under your desk and spending the next - oh I don't know - 2 months fiddling around and trying out all kinds of things is really nothing that can be asked of anyone anymore today. </sarcasm>
Mind you, my boss at the time did not find it funny that I just formatted a surplus workstation and monopolized it, but when I then took the first official training I had a whole stack of questions at the ready with which to hassle the teacher.
Now you tell me: which approach enables you to learn and understand more and better?
@rnm1978: +1! -
Searching for some software plz help
i was wndering if anyone knew of software for a mac that is an autotyper....like a macro...that is freeware........or has a trial...something that i can type text in and set the repeat rate..then it automaticly pastes that text for me...
thanx
any help is apreciatediClip Lite is freeware and will put multiple clipboards in your Dashboard.
iKey is $30 but it may do more of what you're looking for.
-Doug -
Some basic questions: Help defining Real World Classes
I am trying to write a small applet using proper OO concempts and Java technique and I'm confused on the proper way to do this. I think I know several ways that work and have all the peices I need such as JMail and JDBC drivers, but would appreciate help on understanding how to properly structure my classes and objects.
The application will simply do the following: I have a database table that receives a new entry when a truck is late for its delivery. When this new record is created, I need to send an email to the driver manager who will then decide (via a jsp page) whether the customer should receive an email about the late delivery. For each truck, there will only be one driver manager and one client to be notified.
What I'm confused about is what classes and objects to create (and why). My first thought is to create a LateTruck class, a DriverManager class and a Customer class and have the LateTruck class call up the DriverManager to send an email then have the JSP page reinstantiate the LateTruck and instantiate the Customer class to send the email to the client.
If I do it this way, is there a proper way to send the email? Do I send the email as a method in LateTruck which gets the email address from DriverManager such as
LateTruck.Order1234.SendEmail(DriverManager.JoeBlow.Email)
or do I use LateTruck to write the email message which I then pass to DriverManager such as
DriverManager.JoeBlow.SendEmail(message)
Should I even break up the applet into three classes and objects? Since each LateTruck only needs one DriverManager and one Client, is the proper way to do this to create only one class called LateTruck which has DriverManager, DriverManagerEmail, ClientName and ClientEmail all as properties of LateTruck?
Thanks for any help in understanding the basics here.Is that the story of Static Write and the Seven Classes and the evil stepmother Wilma Gates who kept asking "Mirror Site, Mirror Site on the web, who's got the buggiest InterDev?
-
Hello I have a iMac with 3.4 GHZ intel core I7, memory 16 GB 1333 MHZ DDR3, and OS X 10.9.4 Software.
I have problems when I try to copy or modify any file from my MAC to MY PORTABLE DRIVE/DISQUE (external hard disk).
my external hard disk have the next features:
brand: Seagate
4TB
I do not know if I need some software such as: paragon or I need to configure my MAC,
Please help me..
Thanks a lotClick on it, choose Get Info from the File menu, and check the format.
If it's formatted as NTFS, reformat it as MS-DOS, exFAT, or Mac OS Extended (Journaled) as desired, or install software such as Paragon NTFS on the computer.
If it's formatted as FAT32 or exFAT, use the Disk Utility's Repair Disk command on it; this may also happen for a flash drive which is about to fail.
If it's formatted as Mac OS Extended, click Authenticate and provide your administrator password, or change the permissions on that specific folder in its Get Info window.
(110769) -
I have to make a catalouge for my services as a financial planner.. earlier i used to do in MS publisher.. now i have a mac book.. can some one help me with some software info with which i can design a catalogue??
Depending on what your needs are, you may use Pages included in iWork or purchase it separately (usually there is an evaluation copy with any new mac, I guess) or try other publishing apps. I once used MS Publisher, I remember it was something like a more sophisticated word processor, right?
You may try the cheaper DTP iCalamus or Word for mac. -
Security question keep saying they are wrong and I know they are right. I can't change them cuz when I try it tells me to answer the questions. I have tried everything changing my account and all and still can't get it can some one please help me out.
Go here and select "Reset your password." You will receive an email message with a link that bypasses the questions. You will then be able to select and answer the questions again.
-
i do not remember my password of filevault and i can not install some softwares on my mac please help me
Are you sure FileVault is active? You could not have started up without entering the password.
If you are sure, see below.
If you forget the password and FileVault is on -
I have forgoten the security questions,i have tryed ewerithing to reset all of the instructions i have recived from the apple support team. I still can not reset the questions. Can some body please help me to reset them. Thank you and best regards
Since this is a user-to-user support forum, there isn't much we can do other than refer you to the following instructions and as noted in the instructions, then to Apple Support if you can't reset as shown in the instructions: If you forgot the answers to your Apple ID security questions
-
How do I reinstall some software from the cd that came with my Mac? Have tried to reinstall but when I choose customize it brings up the whole bundle for install. Thank you
What are you trying to reinstall?
-
Pro Tools convert to Logic Newbie some simple question for logic users
Hey guys, I am a recent convert from Pro Tools! and There were just some simple questions I thought some of you may be able to help me out with. I am using Logic 9.1.1
1) After I set up a multi timbral software instrument (in this case MOTU Symphonic Library) how do I set up midi channels to trigger the individual sounds in the instrument. (in pro tools I used to create a midi track then send an output of that track to that particular soft synth)
2) How do I set up a and forgive my Pro Tools vocab but basically I want to set up a reverb channel on an aux track have it receive on a bus so I can send other tracks to that particular bus.
Thanks for the insight and really looking forward to finally make use of all this ram! lol1) I have a nord stage and would like record via midi. In pro tools i would usually need to create a midi track with the output set the the nord and an audo aux track to hear it What would I do in order to record midi from my nord stage?
To record, just select a non-audio track, hit record and play the keyboard. The notes will get recorded into a region.
If you want to play it back to the Nord Stage as well, then it makes sense to set the Nord up as a MIDI device in your templates, so you can just add the Nord to a track and not worry about what MIDI ports it's on etc. Open the environment, create a New -> Instrument, called it "Nord Stage", set the MIDI port and MIDI channels it's on, and sav your template.
Now, when you start a song, to sequence the Nord, you just assign the Nord instrument to a track (by for instance, right clicking on a track and choosing your Nord instrument from the list of environment obects that appears).
2) The multi instrument trick is quick and easy its great but How would I do that manually?
Lots of ways, look into your key commands, ther are all kinds of "Create track with same instrument", "Create track with next MIDI channel" and so on. There are too many ways to do this to quickly talk about here. In short, all tracks have an environment object assigned to them, whether it's an audio object, or a MIDI instrument object, and this determines where the data on the track goes.
3) How do you set up midi so that it doen'ts overwrite notes when recording over them?
Not sure I understand you here... -
HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no matter what work I have done, inc cropping they all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to yesterday, when this first started.
I recently changed computer to 64bit from 32bit, not sure if this causing the problem or not. Any help would be appreciated.Robert,
Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals? Sorry, I can't quite follow you.
Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
Thanks.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
How can we change the password in the iBook donated to our nonprofit? No password was given with the iBook and every time we try to install items, the password window pops up. We need to put in printer and other software. Help! We can use the laptop without changing the password.
If you did not get an OS X install-restore DVD with the computer you may need
to buy one from somewhere, and you may be lucky to get a retail OS X 10.5.x
version. The original grey-label install set of software and OS X it shipped with
likely would be an older system than Leopard 10.5. Last versions of G4 Mac, &
G5, shipped with a Tiger 10.4 system; so did early Intel-based Mac. Grey discs
which accompanied other computer build models generally do not interchange.
The last OS X version a PowerPC architecture can use, if supported, is 10.5.8.
A PPC processor at 867MHz & faster should be able to run OS X 10.5 Leopard.
{With the correct disc installer, you can use it to change a password and other
things including re-install, and perform disk utility functions, etc.}
There is a chance you may be able to get a white-label Replacement 10.4 DVD
or Replacement 10.5 DVD from AppleCare or the online Apple Store (800myapple)
from a Mac OS X system specialist; these have been available yet hard to get
as not all persons involved with them seem to know if they still exist until someone
is asking. These aren't retail stock, are special discs for computers who could use
a system later than original old discs; these are complete install discs not for one
specific series of Mac. Generally they'd work in supported PowerPC G4/G5; but
do not replace specialized original install DVD, such as an early Intel mac requires.
You'd need to have a serial number of the computer, and a method of payment
when seeking some replacement system media from Applecare or Apple sales
and these discs are not available in a retail store. The original Retail discs are
labeled differently and shipped in a retail box with a big X on the front. Other
sources for retail 10.4 Tiger or 10.5 Leopard may be online via amazon sellers
or computer resellers who handle repaired Macs. Avoid mystery grey label ones
that were intended to be sold and kept with their original computer kits.
Good luck! -
SGA Size for 8.1.7.4 32 bit? , some Interview Questions
Hi buddies,
I got some interview questions, might be simple for geeks in DBA. I am in need of answers. Could anyone help me.
Thanks,
Raaj
1) Does windows NT support direct I/O?
Answer: Choose one of the answers that apply
A: No, only AIO
B: Yes, depending on hardware.
C: Yes.
D: No.
2) Can you take a coldbackup from solaris and use it on windows NT?
Answer: Choose one of the answers that apply
A: Yes.
B: Yes if RMAN backup performed from NT server.
C: Yes, after running RMAN convert.
D: No.
3) All of the following will alter the number of checkpoints that occur in one hour on the database, except one. Which is it?
Answer: Choose one of the answers that apply
A: Decreasing tablespace size
B: Decreasing size of redo log members
C: Setting LOG_CHECKPOINT_INTERVAL greater than the size of the redo log file
D: Setting LOG_CHECKPOINT_TIMEOUT to zero
4) The DBA is attempting to back up the Oracle database control file. After
issuing the ALTER DATABASE BACKUP CONTROLFILE TO TRACE command, where can the DBA find the backup control file creation materials Oracle created for him or her ?
Answer: Choose one of the answers that apply
A: USER_DUMP_DEST
B: LOG_ARCHIVE_DEST
C: CORE_DUMP_DEST
D: BACKGROUND_DUMP_DEST
5) What is the most important action a DBA must perform after changing the database from NOARCHIVELOG TO ARCHIVELOG?
Answer: Choose one of the answers that apply
A: Shutdown normal and restart the database
B: Perform a full logical database backup
C: Perform a full offline database backup
D: Manually switch the log files
6) Which of the following choices lists an ALTER USER option that can be executed by the user herself or himself?
Answer: Choose one of the answers that apply
A: DEFAULT TABLESPACE
B: IDENTIFIED BY
C: TEMPORARY TABLESPACE
D: PROFILE
7) You need to view the initialization parameter settings for your Oracle
database. Which of the following choices does not identify a method
you can use to obtain values set for your initialization parameters?
Answer: Choose one of the answers that apply
A: Issue SELECT * FROM DBA_PARAMETERS; from SQL*Plus
B: Issue SELECT * FROM V$PARAMETER; from SQL*Plus
C: Issue SHOW PARAMETERS from Server Manager
D: Use OEM Instance Manager
8) As a result of a media failure, the current online redo log group is corrupted, the database crashes, as the current online group is inaccessible. Which type of incomplete recovery are you most likely to perform ?
Answer: Choose one of the answers that apply
A: Change-based
B: Time-based
C: Recovery using a backup control file
D: Cancel-based
9) User SNOW executes the following statement: SELECT * FROM EMP. This
statement executes successfully, and SNOW can see the output. Table
EMP is owned by user REED. What object would be required in order for
this scenario to happen ?
Answer: Choose one of the answers that apply
A: User SNOW would need the role to view table EMP.
B: User SNOW would need the privileges to view table EMP.
C: User SNOW would need a synonym for table EMP.
D: User SNOW would need the password for table EMP.
10) Which one of the following statements is true?
Answer: Choose one of the answers that apply
A: The request queue is common, and the response queue is different for all the dispatchers.
B: The request queue and response queue are different for all the dispatchers.
C: The request queue is different, and response queue is common for all the dispatchers.
D: The request queue and response queue are common for all the dispatchers.
11) What is the largest SGA size for 8.1.7.4 32 bit?
Answer: Choose one of the answers that apply
A: approximately 2GB
B: approximately 3.5GB
C: approximately 4GB
D: approximately 8GB
E: approximately 16GB
12) The DBA is about to perform some administrative tasks. Specifying the
OPTIMAL parameter has which of the following appropriate uses?
Answer: Choose one of the answers that apply
A: Limiting concurrent users
B: Limiting concurrent transactions
C: Limiting growth of rollback segments
D: Limiting growth of tables
13) If the DBA wants to find information about how often transactions are
wrapping transaction information between multiple rollback segment
extents, where would the DBA look to find that information?
Answer: Choose one of the answers that apply
A: DBA_ROLLBACK_SEGS
B: V$ROLLSTAT
C: V$ROLLNAME
D: DBA_SEGMENTS
14) You have 30 rollback segments in your database, for which
TRANSACTIONS_PER_ ROLLBACK_SEGMENT is set to 49 and
TRANSACTIONS is set to 1000. During periods of heavy usage, about how many rollback segments will be actively used by Oracle?
Answer: Choose one of the answers that apply
A: 50
B: 60
C: 20
D: 30
15) The DBA has a table created with the following statement:
CREATE TABLE EMPL
(EMPID NUMBER(10),
LASTNAME VARCHAR2(40),
RESUME LONG RAW);
The DBA attempts to issue the following statement:
ALTER TABLE EMPL
ADD ( PERF_APPRAISE LONG);
What happens?
Answer: Choose one of the answers that apply
A: The statement succeeds.
B: The statement succeeds, but column is added as VARCHAR2.
C: The statement fails.
D: The statement adds a disabled constraint.
16) The primary key of the EMP table has three columns, EMPID, LASTNAME,
and FIRSTNAME. You issue the following SELECT statement:
SELECT * FROM EMP WHERE LASTNAME = 'HARRIS' AND FIRSTNAME = 'BILLI'
AND EMPID = '5069493';
Where would you look to see if this query will use the index associated
with the primary key?
Answer: Choose one of the answers that apply
A: DBA_IND_COLUMNS
B: DBA_TAB_COLUMNS
C: DBA_INDEXES
D: DBA_CLU_COLUMNS
17) You are configuring your index to be stored in a tablespace. Which of the
following storage parameters are not appropriate for indexes?
Answer: Choose one of the answers that apply
A: OPTIMAL
B: INITIAL
C: PCTINCREASE
D: NEXT
18) You need to set up auditing in an order entry and product shipment
application so that when the ORDER_STATUS column in the ORDERS
table changes to SHIPPED, a record is placed in a special table associated
with a part of the application that gives sales representatives a daily list
of customers to call on a follow-up to make sure the customer is satisfied
with the order. Which of the following choices represents the best way
to perform this auditing?
Answer: Choose one of the answers that apply
A: Statement auditing
B: Object auditing
C: Audit by access
D: Value-based auditing
19) Information in the buffer cache is saved back to disk in each of the
following situations except one. In which situation does this not occur?
Answer: Choose one of the answers that apply
A: When a time-out occurs
B: When a log switch occurs
C: When the shared pool is flushed
D: When a checkpoint occurs
20) In order to allow remote administration of users and tablespaces on an Oracle database, which of the following types of files must exist in the database?
Answer: Choose one of the answers that apply
A: Password file
B: Initialization file
C: Datafile
D: Control file
E: Nothing, SYSDBA privileges are not required for these actions.
21) You are planning the storage requirements for your database. Which of the following is an effect of maintaining a high PCTFREE for a table?
Answer: Choose one of the answers that apply
A: Oracle will manage filling data blocks with new records more actively.
B: Oracle will manage filling data blocks with new records less actively.
C: Oracle will leave more space free in data blocks for existing records.
D: Oracle will leave less space free in data blocks for existing records.
22) You manage database access privileges with roles where possible.
You have granted the SELECT_MY_TABLE role to another role, called
EMP_DEVELOPER. To view information about other roles that may be
granted to EMP_DEVELOPER, which of the following dictionary views
are appropriate?
Answer: Choose one of the answers that apply
A: DBA_ROLE_PRIVS
B: DBA_TAB_PRIVS
C: USER_SYS_PRIVS
D: ROLE_ROLE_PRIVS
23) In order to set your SQL*Plus session so that your NLS_DATE_FORMAT
information is altered in a specific way every time you log into Oracle,
what method would be used?
Answer: Choose one of the answers that apply
A: Setting preferences in the appropriate menu option
B: Creating an appropriate LOGIN.SQL file
C: Issuing the ALTER USER statement
D: Issuing the ALTER TABLE statement
24) You create a sequence with the following statement:
CREATE SEQUENCE MY_SEQ
START WITH 394
INCREMENT BY 12
NOMINVALUE
NOMAXVALUE
NOCACHE
NOCYCLE;
Two users have already issued SQL statements to obtain NEXTVAL, and
four more have issued SQL statements to obtain CURRVAL. If you issue a
SQL statement to obtain the NEXTVAL, what will Oracle return?
Answer: Choose one of the answers that apply
A: 406
B: 418
C: 430
D: 4421.-
2.c
3.a
4.a
5.c
6.b
7.a
8.d
9.b
10.a -
11.a
12.c
13.b
14.d
15.c
16.a -
17.a
18.d
19.c
20.a
21. -
22.d
23.b
24.?
hope it helps u.
Thanks
Kuljeet -
i am using iphone5 and when sending sms within 160 characters i am getting 2 sms counts deduction & i hear the message send sound twice. what is wrong here. can some one please help me here???
APPLE need to do something here!!!!!!1Hi...
Thanks for your repaly .
and i am not bale to post a question in developer forum i tried hard but i didnt get .Can you plz explain me how to post a question in developer forum this is very helpfull for me.Because i never did this thing.
Maybe you are looking for
-
NEW FOLDER, for word processing, like Page and others?
We're with a new IMac & iWork. We want to start a folder for docs if not also templates. It is for a word processing folder under Page, iWork and new Mac OSX.
-
Maximum External HDD Size for Time Capsule?
I recently bought a 3TB Hitachi Touro Desktop external HDD, and was wondering if the TC would be able to recognize it (when properly formatted). My current router (WNR3500L) will not recognize the drive due to the large format, and before I go and bu
-
Mapping runtime perfermance issue.
Hi all I have an interface that runtime process sometimes fast sometimes slow.In case of low process ,I figured out the mapping runtime took a lot of time.So i would like to know what factors can lead to the mapping runtime low performance? thanks in
-
HT1296 Can't get photos from icloud & more probs??
1. Some months ago, my husband's phone packed up & he wen't to the istore for a replacement. The guy there said he was able to retreive pictures off the old phone & had put them on icloud. My husband doesn't have an icloud account so the guy somehow
-
Email Update - *UPDATED 29/08/14*
Hi Everyone Thank you for your continued patience with us whilst we undertake the massive job of migrating all our customers over to BT Mail. We are regularly feeding back comments made on the forum to the email team so that they can get an understa