Some songs not importing correctly from CDs with time "798.57...."

Hi, a random selection of songs from CDs I am burning are showing the time as "798.57...." and therefore they don't play either in iTunes or on my iPod. This has happened to a LOT of my songs that are from original CDs, but only to one or two songs on the CD. Any help?
Thanks,
Melissa

Here is what I got when I ran the CD Diagnostics for one of the CDs I was having trouble with (Track 1 and 2):
Microsoft Windows XP Home Edition Service Pack 1 (Build 2600)
Dell Computer Corporation Dimension 2400
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: Pfc (2.5.0.201), CDR4_XP (5.3.4.21), MXLW2K (1.0.1.104), AFS2K (3.1.14.0),
UpperFilters: pwd_2k (5.3.4.59), Cdralw2k (5.3.4.21), GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller\Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
IDE\DiskST340016A______________________________3.75___, Bus Type ATA, Bus Address [0,0]
IDE\DiskWDCWD100AA____________________________05.05B05, Bus Type ATA, Bus Address [1,0]
IDE\CdRomHL-DT-STCD-RW_GCE-8481B________________C102___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: HL-DT-ST CD-RW GCE-8481B, Rev C102
Audio CD in drive.
Found 12 songs on CD, playing time 41:30 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:00:60
Track 3, start time 08:09:40
Track 4, start time 09:58:52
Track 5, start time 14:00:42
Track 6, start time 17:43:25
Track 7, start time 21:30:20
Track 8, start time 24:14:15
Track 9, start time 27:44:70
Track 10, start time 31:06:72
Track 11, start time 34:55:17
Track 12, start time 38:08:55
Audio CD reading failed. Error Code: 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110.
Get drive speed succeeded.
The drive CDR speeds are: 48.
The drive CDRW speeds are: 48 0 0.

Similar Messages

  • Places not imported correctly from iPhoto into Aperture 3

    Hello,
    I'm a first time mac user and have recently installed Aperture 3. I already had an iPhoto library setup with all my events metadata filled out, including faces, places and event descriptions.
    Upon importing my iPhoto library into Aperture 3, the faces were copied over, but none of the places or event descriptions were imported.
    Has anyone else seen this behaviour? Is there a way to pull this across after the import, or should I just delete the aperture library and try again. Ideally, I'd like to avoid having to manually add all this information again!
    Thanks in advance for your help.
    Pete

    Ir. Bob wrote:
    A photo that was rotated in iPhoto will also show up as iPhoto edited.
    This is not what I found to be the case in a recent experiment using iPhoto11- I did repeat it to be sure.
    https://discussions.apple.com/message/15586837#15586837
    Quickly, what I found is that only the ones I did actual adjustments on brought over two images.  Images that were simply rotated, had "quick fixes" or "Effects" did not bring in two images.  More importantly, among the ones with adjustments that did bring in two images, the ones with the keyword  "iPhoto Edited" appear to be nothing more than iPhoto's 6MB JPEG Previews.  The master was a 25MB RAW image.
    I don't know why some users are experiencing doubles on everything, but I recommend caution in deciding which ones to remove or you may find yourself deleting masters and keeping previews. 
    DLS

  • Music in library, why are some songs not marked with cloud?

    Music in library, why are some songs not marked with cloud icon?

    Welcome to the Apple Community.
    Where exactly are you looking and what do they look like, there are several iCloud icons used in iTunes.
    Maybe a screenshot.

  • PDF's not importing correctly

    I am using CS5 on iMac 27" quad.
    I am trying to import a PDF into Photoshop.
    But it is not importing correctly.
    The PDF is a label template, which prints perfectly from the PDF.
    But when I import it into Photoshop, the dimensions change.
    So the text boxes for the labels don't align up correctly to the label sheet.
    The top label is OK, but the boxes keep moving to the right, so that top label in column 5 is a 1/4" off to the right. The labels seem to be "traveling."
    Vertically, the same thing is happening.
    Row #1 is OK
    but by the end of the page, Row #5 is 3/8" off the page.
    I have disabled all printing options: no auto-center; no fit to page; no scaling.
    The printer software should not be adapting the document at all.

    Here are two articles to start with...don't know what you've tried so far
    iTunes Does Not Recognize Audio CDs
    You Can Not Import Or Play Music From an Audio CD in iTunes

  • Help Please: Unable to Import or Burn CDs with iTunes

    Hello,
    At some point over the last few updates I seem to have lost the ability to import or burn CDs with iTunes. I've done so many times in the past with no problem however when I attempt to do so now my entire PC restarts or in a few cases gives me the generic Windows "iTunes needs to close" error.
    So far I've made sure my PC is not overheating. I've ruled out spyware or viruses using AVG and CCleaner. I've swapped out power supplies only to have the problem continue. I am able to listen to music and/or burn CDs and DVDs in both of my drives using other applications with no problem. I've tried fresh, clean installs of iTunes all the way back to 8.02 with no success. I've even gone as far as to completely reformat Windows only to have this problem continue.
    Any help or suggestions would be most welcome. I will be glad to provide any requested information, thank you.
    Message was edited by: Simbelmyne

    What good is buying your music through itunes if you can't burn a cd and/or back it up? Why isn't this issued solved - I can't burn a cd. I have missing registry files and warning that says to reinstall which I've tried unsuccessfully. Hopefully they'll find a fix before I lose my 500 songs I've purchased...does anyone back up on a external hard drive - any suggestions? Thanks

  • HT201317 When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)

    When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)

    Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
    It sounds like you are using two methods to upload to Facebook:
    1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
    2. Exporting pics and uploading to Facebook from the browser.
    I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
    I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
    Your problem is not with Aperture, it is using Facebook for showing your work.
    If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
    If you insist to use Facebook as your way to share your work, then your workflow should be this:
    1. Right click images you want to share.
    2. Select Export version.
    3. Export as 100% size and ensure the export settings are set at 100% quality.
    4. Upload this pic into Facebook.
    This will get you the best image size and resolution on Facebook.
    See how you go.

  • ImageJ in Yosemite can not import video from QuickTime plugin

    ImageJ in Yosemite can not import video from QuickTime plugin.... it seems can not found QuickTime_Capture.jar within QuickTime_Plugins.jar but I'm sure it is in the plugin directory.
    I google this problem but not luck!
    James

    Thank you Benjt and Sue:
    I have first chosen to followed Sue's suggestion concerning the firewire connections since that looked to be the one most easily done quickly. I therefore had to make more room on the hard drive in my MacBook Pro since the drive is only 100 GB. I normally use an external 400GB drive to hold my video files since one of the plays last May required about 200GB! However, the play this time was a short one and not really High Density anyway like the one was in May with a much finer camera. I have been connecting the external HD via Firewire800.
    I simply moved a number of files from my MacBook Pro drive and put them in the external HD as well as another HD and then disconnected the external HD from my MacBook. I was, indeed, able to import the entire tape in one shot into iMovie. iMovie is still not working right since I found that I had to click "import" in iMovie to start collecting a clip and then hit "play" on my camcorder to actually import the tape contents into the clip. I found the whole play, just 50 min this time, in that clip when we returned home this evening.
    I can now get the editing done one their last play for the kids and have DVDs for them when I go back up to Gainesville to record their current play on Thursday evening.
    I will then devote some time to trying to solve the rest of the problem, looking into Benjt's suggestions.
    Thanks very much for your very timely critical and positive help this afternoon. For your information, I also have been working on learning Final Cut Express but as I tried to put all of my reading into practice, I now I can't even get FCE to open - but that's another story and a very different problem.
    Thanks again.
    BL "Gramp"

  • I can not import photos from PC to my Ipad, it says iTunes will no longer sync photos to the iPad

    I can not import photos from my PC to the iPad, it says  iTunes will no longer sync photos to the iPad

    YES Terence!  Thank you. Exporting allowed me to move my photos from iPhoto into the Burn Folder on my desktop.   But that doesn't explain why I'm having to go that route now.   Have I done something (accidentally changed some setting) on my computer that will not allow me to just click and drag anymore?   I really liked the convenience of the click and drag option. 
    I don't have the time tonight to export and burn a lot of CD/DVDs.  I'll try that tomorrow and make sure my photos are moving properly.  I also need to export photos to my external hard drive to make sure that route is working. 
    Wouldn't you know that my Apple Care Plan runs out this Wednesday?!  I need to make sure everything is working properly before that expires. 
    Thank you so much for your help.   I really, really appreciate it.

  • Major Problem - some pages not displaying correctly

    All,
    I have a problem with some pages not displaying correctly i.e.
    SE80 navigation page
    F1 help
    I am using XP sp2 and we have the latest version of internet explorer 7 (which I cannot uninstall as it is company policy)
    SAP version is 6.4c.
    I am using SAP Gui 7.10 with the latest patch 710_7.
    This is making the system completely unusable for me.
    I have read a few forum posts mentioning that upgrading to the latest patch version will resolve this problem, but this clearly has not worked for me.
    Can someone please help,  how do I actually esculate this to SAP?
    <REMOVED BY MODERATOR>
    thanks
    Edited by: Alvaro Tejada Galindo on Apr 8, 2008 4:07 PM

    what kind of useless answer was that?  If you have no constructive comments to add please refrain.
    I am a SAP developer in ABAP and its related to SE80 which I used to use primarily for editing code (i now have to use se38).
    I often use F1 for hints on code etc to use and syntax so it does make it very difficult for me.  If there is a more appropriate forum for this please direct me, instead of posting in gibberish english.
    Max - I assume you have the same problem and it is also not resolved by the latest patch.  I wonder is there a way this can be esculated with SAP?
    Edited by: Steve Trillo on Apr 4, 2008 10:43 AM

  • Do not import video from iPhon 4s in iPhoto 9.4.3 (720.91)

    Do not import video from iPhon 4s(6.1.3(10B329)) in iPhoto 9.4.3 (720.91) on my iMac(iMac 27"_Intel Core i5 2,8 GHz_RAM 4 GB_HDD 3Tb_ATI Radeon HD 5750 1Gb_Mac Os 10.8.4)
    "unreadable files.
    Could not import because did not recognize the file format"

    Presumably you mean 'Does not...'?
    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?
    Post back with the result.

  • I can not import pictures from iPad into Aperture

    I have an iPad 1, latest iOS. I shoot Nikon RAW files that I import unsingh the camera connector kit (CCK). I use Aperture, again latest version. All of that in OS X latest and greatest on an iMac (March 2009).
    I simply can not import pics from the iPad onto Aperture.
    AP3 does see the iPad when I go in import mode (CMD I) and does see all my pics (just came back from vacation with 3000+).
    Importing All starts the process, the import wheel spins, but the nothing happens . If I double click on the "Importing..." message to see the scheduled tasks, I do see that a number of importing tasks are scheduled.
    However, no progress is ever made.
    Any ideas?

    Are you connected to the wi-fi and/or 3G

  • Canon 5D MK II white balance set as K does not import correctly

    With a 5D II and the Kelvin white balance set in the camera the WB does not import correctly for RAW files and LR 2.4. For example when set to a specified white balance as a Kelvin setting, for example 5200, and then import the raw files with "As Shot" specified or subsequently WB to "As Shot" in Develop module the white balance is set to 4850 +1 (in the example of 5200). The pre set WB options provided inthe camera do work correctly.
    Does anyone know if there is a way to set this up to work correctly? Has anyone else experienced this issue?
    Thank you.

    Does anyone know if there is a way to set this up to work correctly? Has anyone else experienced this issue?
    Lightroom does work correctly. The numbers are different, but the appearance ot the colour temperature matches. The way I understand it, cameras don't actually store Kelvin numbers, but store colour space co-ordinates instead. LR and your Canon are interpreting the RAW values into different colour spaces, so the kelvin values and tint numbers will differ.
    Hal

  • Lightroom 4.1 will not import video from the Olympus OM-D EM-5

    Lightroom 4.1 will not import video from the Olympus OM-D EM-5. It sees the files in the import dialog, but it fails during import.

    Here's a post concerning 5D MKIII file corruption, which may also be due to a camera malfucntion. Yes, there could be something wrong with your camera.
    http://forums.adobe.com/message/4882852#4882852
    SUGGESTION:
    Install the Canon EOS Utility that came with your camera. Also check for an updated version of the EOS Utility after the install. You need to install from the CD first before you can install any updates.
    http://www.usa.canon.com/cusa/consumer/products/cameras/slr_cameras/eos_5d_mark_iii#Driver sAndSoftware
    If the EOS Utility can download the CR2 files to your hard drive, then your camera is not defective.

  • In my shuffle 4g the songs not playing properly most of the times it gives some kind of sound and stop playing songs.

    in my shuffle 4g the songs not playing properly most of the times it gives some kind of sound and stop playing songs.

    First, make sure the headphones plug is completely pushed into the headphones jack.  Because the jack serves multiple functions, the fit may be tighter than expected (especially if you have the Apple EarPods).
    Also, try using the headphones with another device, to rule out bad headphones.  Or try another set of (known working) headphones with the shuffle.
    Are you using older headphones that have remote control buttons?  Not the latest EarPods and not the immediately previous version of white Apple earbuds.  Or non-Apple headphones with remote control buttons.  It's possible they are not compatible and interfering with the shuffle's operation.  Any standard headphones (with no buttons) should work.
    If that does not help, you can try doing a Restore on the shuffle in iTunes.  The Restore button is on the shuffle's Summary screen in iTunes.  This will erase the shuffle, reinstall its software, and set it to defaut settings.  If a software (or settings) problem on the shuffle is the cause, the Restore should fix it.
    Otherwise, if the Restore does not help, it may be a hardware problem.  If it has been less than one year since purchase, it is under warranty.

  • IPhoto 11 (9.3.1) Q: howto delete already imported Photos from iPhone with iPhoto?

    iPhoto 11 (9.3.1)
    Steps:
    a) i startet iPhoto
    b) choose device iphone
    c) marked some phots
    d) clicked on import selected photos
    e) delete photos after import: NO
    f) photos imported to iphoto library
    Now i have my photos imported.
    when i now go in iPhoto to my iphone device i see now a section with my already imported photos
    Q: how i can delete some of this already imported Photos from iPhone with iPhoto?
    PS:
    i know there is the "Image Capture" app. but i like to do this with iPhoto, because i see there the already imported photos which i can delete safely from iphone.

    You'll need to create a new, temporary library and import into that with the option to delete from your iPhone. Then delete the library and go back to your current library.
    OT

Maybe you are looking for