Some sound does not match up in iDVD during transitions

I have created iMovie 09 (8.0.4) that has transitions (fades, wipes etc) and then send it to iDVD and at different times the sound cuts out several seconds before the transition then then the new sound starts at the wrong place. But it does not happen at every transition, but enough to make it very noticeable; in my case a wedding procession of each bridesmaid walking, the sound cuts out (should fade) about 2 seconds then the Cross Dissolve happens, but not on every girl, but most of them.
I have other movies and DVDs that do not have this issue.
Any ideas?

You are correct, re: the "best" way to hanlde OOS. The ultimate method with VHS tapes, is to use an A-D bridge, that Captures both the Audio & Video in sync. However, this usually means an investment is a product like the Canopus/Grass Valley 110, or their 300*. These are FireWire devices, but will get your tapes Captured (through the Edius software) onto your computer in DV-AVI Type II format w/ 48KHz 16-bit PCM/WAV Audio.
Next to that, the manual method works well. Usually, the OOS will not be dynamic, i.e. it will not drift over time, but always check to be sure. Also, it will most often be constant Capture to Capture, i.e. you can usually find the offset and can at least use that as the starting point for all other Captures from that card.
Good luck,
Hunt
* Note that there are other good products available. These are just two that I like. Also, few users have ever gotten any Dazzle product to work well, if at all. If you get one of those, you could be the lucky user to actually get it to work.

Similar Messages

When a video is taken in Photo Booth, the sound does not match up

When trying to take a video on photobooth, the sound does not match up with the image when the video is played back. What can I do to fix this?

Check your footage interpretation, split the audio in an external program, convert the sample rate and import it separately or whatever. Most likely you simply have used unsuitable recording settings with odd sample and data rates.
Mylenium

Sound does not match video

I have imported an HD video from a Canon HV30 camcorder into iMovie HD 6.0.3. The picture looks great but the sound does not match the video. I have never encountered this problem before when importing from other video camcorders (non HD). Does anyone have any idea how to solve this problem? Thanks.

Hello, skidude23,
Welcome to the discussions.
Was the sound recorded in 12 bit instead of 16 bit?
You can fix this by extracting the audio from the video clips. Put your movie clips in the timeline, and put it in the 'timeline' vies.
Select the clip first, then go Advanced->extract audio. It may take a while, but you will then have the video clip on the video track, muted, with a separate audio track below it. You can then select 'show audio wave form' to see the audio waves and move the audio track slightly to get it synched with the video for that clip. When it is correct, do a 'Lock audio at playhead' to secure it.
Do this for each of your clips. If your clips are quite long, this extraction can take a very long time. That is why I said to do it one clip at a time, but that does get tedious.

When watching a movie in Itunes the sound does not match the lips

when watching a movie in Itunes the sound does not match the lips, is this normal? & If I purchase a movie will it play like a normal dvd?

Try the suggestions in this thread.

In AE CS6, the sound does not match with video

Hi,
I would like to ask a question. I have AE CS6, and I recorded a gameplay video with Avermedia Live Gamer HD. The format of this video is .mp4. When I import the .mp4 into the program, the sound does not match. On the original video, when i play with VLC or WMP, all things are good, and when i import, the sound does not good. What causes this problem, and can I do something to solve this?
Thanks the answers, R3dLinE

Check your footage interpretation, split the audio in an external program, convert the sample rate and import it separately or whatever. Most likely you simply have used unsuitable recording settings with odd sample and data rates.
Mylenium

Sound does not match image - ????

I am now having the same problem with my mac mini that I was having with my G4 powerbook.
When in imovie I choose share and then videocamera and send the movie to a video camera, sometimes the voice of the person speaking does not match the lips.
Usually if I do a restart, and make the same movements then it will work okay.
The camera is a JVC.
Any ideas???

Robert,
Try these fixes in iMovie before going to iDVD,
b even if the problem only occurs after burning
http://danslagle.dvmix.com/mac/iMovie/audio/1001.shtml
John

Sound does not match video - H264, animation etc?

Hello,
I am having a little trouble with Quicktime. I am exporting a music video (from After Effects CS3) with H264 compression (at a variety of settings, I also have an archival copy with animation compression) and the exported video, when played back, plays faster than the sound, or the sound plays slower than the video.
The sound source file is 32 bit, 41,000 kHz, and I set the output for the .mov to be 16-bit, and 41,000 kHz.
I have tried a lot of different settings. I have a very powerful workstation, so I don't think that is the problem.
The most telling thing seems to me to be that when I play the exported .mov in After Effects, the sound plays back at the right speed.
I want to show the H264 version on the internet, and because it is a music video the sound sync is vital.
Can anyone help me here?
Thanks very much,
Simon

Sorry I had that the wrong way round - the video plays back slower than the sound - or the sound plays back faster than the video.

HT1933 I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my bi

I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my birthdate on two of the accounts. Apple can not send me email with a password authorization on several current accounts that I have with them. How can I contact Apple with this annoying problem I can not fix.

settings - app/iTunes store - sign out and sign back in with your new id.
Note - if your older apps needs an update it will use your old apple id and password, as Apps are tied to the apple id that was used to purchase it.
You can't merge apple id.

SCCM issue - "LANG_LIST has some locales which does not match with the locale of serial number"

I have a problem with the error "LANG_LIST has some locales which does not match with the locale of serial number" recurring.
I am trying to install Acrobat XI Std silently by SCCM.
I've used the Adobe Customisation Wizard to create a mst which include the volume serial number we have with our licence purchases. Note that I am in Australia. I use the command line in SCCM for the install as "msiexec /i "AcroStan.msi" TRANSFORMS="D&B_AcroStd.mst" /qn" which fails silently. If I install on a local machine using an admin command prompt and changing to /qb at the end, I get the aforementioned error.
I have a few things to try and resolve, having searched the adobe forums and other forums for the solution. The mst is only trying to install US English & I have even gone so far as to use the direct editor in the customisation wizard and change some values in the property table to resolve this. In the property table I can confirm that LANG_SEL_DEFAULT = ENU, REGIONAL_LIST = ENU, LANG_LIST = en_US, ProductLanguage = 1033
Is there a way to check the language specified for ym serial number?
Bryndon

Update on a couple of details:
@Sabian,
Thanks for the location, I've downloaded and then when I tried an install of the newly extracted msi (admittedly on the same computer) I got exactly the same issue. Of note though is that running /qf automatically brought up the same serial number and the same incorrectly spelled company name. Installing on another computer (freshly imaged) doesn't have those inputs already present under /qf. Next when I try using the transfrom (a new one) with /qr it gives an error of the serial number, displaying the entire serial.
@Sebastian
I've had a look through yours and it seems our issues could have the same origin. Looks like I may have to call customer support regarding the serial number as Sabian suggested in your thread.
The bit that gets me is when the same serial number is used in a manual install (or /qf) then it installs ok without any errors.

When deploy multiple updates, some updates fail with Hash does not match expected

If I deploy a few updates (less than 5) the deployment completes without any issues. If I have a lot of updates, most the updates install with no issues but some, and not always the same update, fails with an error in the CAS.log on the client
that states "Hash does not match expected" after several reties the update will download and install.
What could be causing this?
I have setup a new folder that is not on the root of the drive. This has not help with this issue but is handy in organization.
Ashley
County of San Bernardino
Assessor\Recorder\Clerk
Automated System Analyst

It you don't do anything and the hash calculates and downloads correctly then I would look to a network error of packet corruption or something wrong with the DP.
http://www.sccm-tools.com http://sms-hints-tricks.blogspot.com

Setup.exe gives a "LANG_LIST has some locales which does not match with the locale of serial number"

I ran the Adobe Customization Wizard XI to create a transform file and now when run setup.exe it always come with the error "LANG_LIST has some locales which does not match with the locale of serial number".
It does the same thing when using msi with the command : msiexec /i AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
Here is my setup.ini file
[Startup]
RequireOS=Windows XP
RequireMSI=3.1
RequireIE=7.0.0000.0
Require64BitVC10RT=1
CmdLine=/spb /rs /sl"1036"
[Product]
msi=AcroPro.msi
vcrtMsi=vc_red.msi
vcrtDir=VC10RT_x64
Languages=1033;1036
2052=Chinese Simplified
1028=Chinese Traditional
1029=Czech
1030=Danish
1043=Dutch (Netherlands)
1033=English (United States)
1035=Finnish
1036=French (France)
1031=German (Germany)
1038=Hungarian
1040=Italian (Italy)
1041=Japanese
1042=Korean
1044=Norwegian (Bokmal)
1045=Polish
1046=Portuguese (Brazil)
1049=Russian
1051=Slovak
1060=Slovenian
1034=Spanish (Traditional Sort)
1053=Swedish
1055=Turkish
1058=Ukrainian
1025=English with Arabic support
1037=English with Hebrew support
6156=French (Morocco)
CmdLine=TRANSFORMS="AcroPro.mst"
[Windows XP]
PlatformID=2
MajorVersion=5
MinorVersion=1
ServicePackMajor=3
[MSI Updater]
Path=WindowsInstaller-KB893803-v2-x86.exe
I don't know what goes wrong as took my serial number on my profile from the adobe web site, same thing for the download of the software.
Does it means that the serial number provided was invalid for deploying ?
NB.: My goal is to deploy our Acrobat XI through SCCM in silent mode and I don't know if there is extra consideration for that. For now it's only not working at the command line.
Another important point is that the install works great without customization ! If I just run the setup.exe from freshly extracted files and I use my serial number, everything is working fine.
So what goes wrong ?

Thanks for the reply brogers_1 and Vinod Dbhal, you gave good hint.
I retried installing the initial package in French on a Windows 7 English and the software installed properly in French.
As I used to work with virtuals for those tests, I rolled back my virtual and redo my test installation with chosing to install it in English on my Windows 7 English and again the installation finished properly but I was surprised when I realized that even if I chose English as language, the software was running in French !
Of course I can change the language settings (in the edit-preferences-language) to follow the operating system witch is nice.
That gave me the cue I needed to know. I started from scratch my customization with choosing only the French language in the "Application Languages" and I left the MUI Languages blank and saved the .mst
I ran again the same command : msiexec /i AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
And everything works fine.
NB.: As I used the .msi directly, of course I had to install the prerequirement Visual C++ 2010 first. Otherwise the installation failed without any error message.
Thanks again to you for your good hint,
Bob

Artwork on my iPad does not match iTunes and is not correct for movies, TV Shows Nd some songs

Artwork on my iPad does not match iTunes and is not correct for Movies, TV Shows and some songs & Albums. Is this issue resolved? If so what was or is the fix. I have not been successful in locating that. I found posts stretching back into late 2010.

most of these items were downloaded from eihter iTunes or in the case of movies, imported into the app and then loading them to TV Series or Movies as appropriate. They were all fine until about two days ago when I did a sync. Then the artwork went haywire. I tried manualy removing and replacing the artwork in iTunes with the correct jpg's. and then re-sync. iTunes shows everything OK, but the iPad is the one with it all messed up.

The file may be corrupt. The file header checksum does not match the computed checksum.

I just put Vista Home Premium on a computer I was going to give to my son. Upon adding some hardware I kept getting the above screen. "The file may be corrupt. The file header checksum does not match the computed checksum.' When I booted in safe mode and slow boot, it hung on crcdisk.sys. I removed everything except the keyboard hhd dvd and fdd and it still does the same thing. I tried to reinstall Vista but it keeps hanging. From reading a lot of other threads this seems to be a big problem. I doubt if the product should have been marketed. But.... If anyone can help me get it booted I would like to try XP instead. I tried to install XP on the same drive and it hungs there too.

Hi ballen6721,
Thank you for the post.
This issue can occur if the newly installed hardware device is incompatible with the system.
Based on the current situation, I suggest trying the following steps to troubleshoot the issue:
Method 1 Device Clean Boot
============================================
Please unplug all unnecessary devices such as sound card, printer, network card and TV card.
Method 2: Startup Repair from the Windows Recovery Environment (WinRE)
============================================
1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
4. Click Repair your computer.
5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next.
6. At the System Recovery Options Dialog Box, click on Repair your computer.
7. Click the operating system that you want to repair, and then click Next.
8. In the System Recovery Options dialog box, click Startup Repair.
Method 3: Use the Windows Recovery Environment (WinRE) to run System Restore ============================================
1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
4. Click Repair your computer.
5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next
6. At the System Recovery Options Dialog Box, click on System Restore.
7. Follow the System Restore Wizard instruction and choose the appropriate restore point.
8. Click Finish to restore the system.
Note: If you computer is an OEM one, the method to enter WinRE can be different, you may contact your OEM to consult how to enter WinRE.
Can we start the computer now?
If the issue persists, please help confirm the following points:
1. What hardware changes have you made recently?
2. Can we enter Safe Mode now?
I look forward to hearing from you.
Best regards,
Tim Quan
Microsoft Online Community Support

Enprise JC error: series period does not match current period

I want to make create invoice from Enprise Job Costing Contract. There are some lines in Contract Detail but I want to process only two of them. I put the amount in Invoice Now, Post Date, and Invoice Due Date.
The invoice is supposed to be from previous posting period (the previous month/year) so I search the correct series number in Invoice No. drop-down list in the Job Costing Contract form. But the available options are only manual and serial number of current period. If I click Process Invoice Now button, I get error message: Error creating invoice: series period does not match current period
I tried to change the settings from Administration > System Initialization > Document Numbering to set the numbering series to previous period but so far nothing changed, and I still can not create invoice.
I currently use SAP B1 8.8 PL 13 and Enprise Job Costing 8.8 (version 8.80.101)
Anybody can help me? Thank you in advance for any good advice.

Hi Sandy,
your SAP support partner will be able to register a ticket on the Enprise Support Portal to have this investigated for you, Enprise do not answer questions directly from this forum.
Having said that... it sounds as though the invoice numbering series you are trying to use is only valid for a specific year. Did you make sure you also changed the Invoice Date (top right side of screen) to be in the same year?
kind regards,
Cathy

After export audio does not match w/ video. ?

I exported my movie from FCE, and the audio is off. It does not match the video, i see lips move but not w/ the sound. Can an help? -Thanks!

Can you provide some specific info or steps you take?
Al

Some sound does not match up in iDVD during transitions

Similar Messages

Maybe you are looking for